欧洲安全要求标准(EN safety requirement standards)

ANSI |  BS |  DIN |  EN |  GB |  IEC |  ISO |  JIS |  NF |  DIC
编号中文名称英文名称
CR 14302-2002 健康信息学 间歇连接设备的安全要求框架 Health informatics - Framework for security requirements for intermittently connected devices
CWA 14167-1-2003 用于电子签名的可靠系统管理认证的安全要求 第1部分:系统安全要求 Security requirements for trustworthy systems managing certificates for electronic signatures - Part 1: System security requirements
CWA 14167-2-2002 用于电子签名的可靠系统管理认证的安全要求 第2部分:CSP签字操作密码模块 防护框架(MCSO-PP) Security requirements for Trustworthy Systems Managing Certificates for Electronic Signatures - Part 2: Cryptographic Module for CSP Signing Operations; Protection Profile (MCSO-PP)
CWA 14170-2001 签名生成应用软件的安全要求 Security requirements for signature creation applications
CWA 14174-3-2001 金融交易IC卡读卡机(FINREAD) 第3部分:安全要求 Financial transactional IC card reader (FINREAD) - Part 3: Security requirements
CWA 14842-3-2003 电子商务 商店描述和处理 第3部分:ICT安全要求 Electronic commerce - Shop presentation and transactions - Part 3: ICT security requirements
EN 1010-3-2002 机械安全 印刷和纸张转换机的设计和结构的安全要求 第3部分:切割机 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines
EN 1012-1-1996 压缩机和真空泵 安全要求 第1部分:压缩机 Compressors and vacuum pumps - Safety requirements - Part 1: Compressors
EN 1012-2-1996 压缩机和真空泵 安全要求 第2部分:真空泵 Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps
EN 1023-2-2000 办公家具 屏风 第2部分:机械安全要求 Office furniture - Screens - Part 2: Mechanical safety requirements
EN 1028-1-2002 消防泵 带起动器的消防离心泵 第1部分:分类 一般和安全要求 Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification; General and safety requirements
EN 1028-2-2002 消防泵 带起动器的消防离心泵 第2部分:一般和安全要求的验证 Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2: Verification of general and safety requirements
EN 1034-1-2000 机械安全 造纸机械和精整机的设计和建造安全要求 第1部分:通用要求 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements
EN 1034-3-1999 机械安全 造纸机械和精整机的设计和建造安全要求 第3部分:卷纸机、纵切机和绞合机 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Winders and slitters, plying machines
EN 1035-1998 鞣皮机 移动平整机 安全要求 Tannery machines - Moving platen machinery - Safety requirements
EN 1069-1-2000 高度在2m以上的水滑道 第1部分:安全要求和试验方法 Water slides of 2 m height and more - Part 1: Safety requirements and test methods
EN 1083-2-1997 电刷 第2部分:安全要求 Power-driven brushes- Part 2: Safety requirements
EN 1095-1998 游艇上用的甲板安全带状装置和安全索 安全要求和试验方法 Deck safety harness and safety line for use on recreational craft - Safety requirements and test methods
EN 1114-1-1996 橡胶和塑料机械 挤压机和挤压工作线 第1部分:挤压的安全要求 Rubber and plastics machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders
EN 1114-2-1998 橡胶和塑料机械 挤压机和挤压工作线 第2部分:冲模表面造粒机的安全要求 Rubber and plastics machines - Extruders and extrusion lines - Part 2: Safety requirements for die face pelletisers
EN 1114-3-2001 橡胶和塑料机械 挤压机和挤压工作线 第3部分:压出机的安全要求 Rubber and plastics machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs
EN 1129-1-1995 家具 折叠床 安全要求和测试 第1部分:安全要求 Furniture - Foldaway beds - Safety requirements and testing - Part 1: Safety requirements
EN 1129-2-1995 家具 折叠床 安全要求和测试 第2部分:试验方法 Furniture - Foldaway beds - Safety requirements and testing - Part 2: Test methods
EN 1130-1-1996 家具 家用婴儿床和摇篮 第1部分:安全要求 Furniture - Cribs and cradles for domestic use - Part 1: Safety requirements
EN 1153-1995+AC-1996 厨房家具 固定和活动厨柜和工作顶柜的安全要求和试验方法 Kitchen furniture - Safety requirements and test methods for built-in and free standing kitchen cabinets and work tops / Note: To be replaced by prEN 14749 (2003-08).
EN 1176-1-1998+A1-2002 +AC-1998+A2-2002 运动场设备 第1部分:一般安全要求和试验方法 Playground equipment - Part 1: General safety requirements and test methods
EN 1176-2-1998+A1-2003 运动场设备 第2部分:秋千试验方法和附加特殊安全要求 Playground equipment - Part 2: Additional specific safety requirements and test methods for swings
EN 1176-3-1998+A1-2003 运动场设备 第3部分:滑梯试验方法和附加特殊安全要求 Playground equipment - Part 3: Additional specific safety requirements and test methods for slides
EN 1176-4-1998+A1-2003 运动场设备 第4部分:跑道试验方法和附加特殊安全要求 Playground equipment - Part 4: Additional specific safety requirements and test methods for runways
EN 1176-5-1998+A1-2002 +AC-1998+A2-2003 运动场设备 第5部分:圆盘传送带试验方法和附加特殊安全要求 Playground equipment - Part 5: Additional specific safety requirements and test methods for carousels
EN 1176-6-1998+A1-2002 运动场设备 第6部分:摆动设备试验方法和附加特殊安全要求 Playground equipment - Part 6: Additional specific safety requirements and test methods for rocking equipment
EN 1177-1997+A1-2001 冲击减震运动场表面修整 安全要求和试验方法 Impact absorbing playground surfacing - Safety requirements and test methods
EN 12012-1-2000 橡胶和塑料加工机械 粉碎机 第1部分:对刀片式制粒机的安全要求 Rubber and plastics machines - Size reduction machines - Part 1: Safety requirements for blade granulators
EN 12012-2-2001 橡胶和塑料加工机械 粉碎机 第2部分:带式成球机的安全要求 Rubber and plastics machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers
EN 12012-3-2001 橡胶和塑料加工机械 粉碎机 第3部分:对撕碎机的安全要求 Rubber and plastics machines - Size reduction machines - Part 3: Safety requirements for shredders
EN 12013-2000 橡胶和塑料加工机械 内部混合机 安全要求 Rubber and plastics machines - Internal mixers - Safety requirements
EN 12077-2-1998 起重机安全 卫生和安全要求 第2部分:限制和指示装置 Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devices
EN 12110-2002 隧道开凿机械 气塞 安全要求 Tunnelling machines - Air locks - Safety requirements
EN 12111-2002 隧道开凿机械 道路镦锻机、连续开采机和掘进机 安全要求 Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirements
EN 12128-1998 生物学 研究、开发和分析用实验室 微生物实验室的遏制水平、危险区域、地点和物理安全要求 Biotechnology - Laboratories for research, development and analysis - Containment levels of microbiology laboratories, areas of risk, localities and physical safety requirements
EN 12162-2001 液体泵 安全要求 流体静压试验程序 Liquid pumps - Safety requirements - Procedure for hydrostatic testing
EN 12196-2003 体操设备 跳马和鞍马 功能和安全要求 试验方法 Gymnastic equipment - Horses and bucks - Functional and safety requirements, test methods
EN 12197-1997 体操设备 单杠 安全要求和试验方法 Gymnastic equipment - Horizontal bars - Safety requirements and test methods
EN 12203-2003 鞋袜、皮革和人造革制品加工机械 鞋和皮革模压机 安全要求 Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements
EN 12221-1-1999 家用更换部件 第1部分:安全要求 Changing units for domestic use - Part 1: Safety requirements
EN 12227-1-1999 家用婴儿围栏 第1部分:安全要求 Playpens for domestic use - Part 1: Safety requirements
EN 12254-1998+A1-2002 激光工作场所屏蔽 安全要求和试验 Screens for laser working places - Safety requirements and testing
EN 12270-1998 登山设备 楔子 安全要求和试验方法 Mountaineering equipment - Chocks - Safety requirements and test methods
EN 12275-1998 登山设备 连接器 安全要求和试验方法 Mountaineering equipment - Connectors - Safety requirements and test methods
EN 12276-1998+AC-2000 登山设备 摩擦固定器 安全要求和试验方法 Mountaineering equipment - Frictional anchors - Safety requirements and test methods
EN 12277-1998 登山设备 吊带 安全要求和试验方法 Mountaineering equipment - Harnesses - Safety requirements and test methods
EN 12278-1998 登山设备 滑轮 安全要求和试验方法 Mountaineering equipment - Pulleys - Safety requirements and test methods
EN 12301-2000 橡胶和塑料机械 砑光机 安全要求 Rubber and plastics machines - Calenders - Safety requirements
EN 12321-2003 地下采矿机械 铠装刮板运输机安全要求规范 Underground mining machinery - Specification for the safety requirements of armoured scraper conveyors
EN 12346-1998 体操器械 肋木、格梯和爬架 安全要求和试验方法 Gymnastic equipment - Wall bars, lattice ladders and climbing frames - Safety requirements and test methods
EN 12409-1999 橡胶和塑料机械 热成形机 安全要求 Rubber and plastics machines - Thermoforming machines - Safety requirements
EN 12413-1999 粘合磨料制品的安全要求 Safety requirements for bonded abrasive products
EN 12432-1998 体操器械 平衡木 功能和安全要求、试验方法 Gymnastic equipment - Balancing beams - Functional and safety requirements, test methods
EN 1248-2001 铸造机械 喷砂设备的安全要求 Foundry machinery - Safety requirements for abrasive blasting equipment
EN 12491-2001 滑翔伞设备 紧急时用降落伞 安全要求和试验方法 Paragliding equipment - Emergency parachutes - Safety requirements and test methods
EN 12492-2000+A1-2002 登山设备 登山者头盔 安全要求和试验方法 Mountaineering equipment - Helmets for mountaineers - Safety requirements and test methods
EN 12503-1-2001 运动垫 第1部分:体操垫 安全要求 Sports mats - Part 1: Gymnastic mats, safety requirements
EN 12503-2-2001 运动垫 第2部分:撑杆跳高和跳高垫 安全要求 Sports mats - Part 2: Pole vault and high jump mats, safety requirements
EN 12503-3-2001 运动垫 第3部分:柔道垫 安全要求 Sports mats - Part 3: Judo mats, safety requirements
EN 12514-1-2000 燃油咀炉供油系统用的装置 第1部分:安全要求和试验 零部件、输油泵、控制和安全装置、油罐 Installations for oil supply systems for oil burners - Part 1: Safety requirements and tests - Parts, oil feed pumps, control and safety devices, supply tanks
EN 12514-2-2000 燃油炉供油系统用的装置 第2部分:安全要求和试验 零部件、阀门、管道、滤油器、油气分离器、油量指示表 Installations for oil supply systems for oil burners - Part 2: Safety requirements and tests - Parts, valves, pipes, filters, oil de-aerators, meters
EN 12547-1999 离心机 通用安全要求 Centrifuges - Common safety requirements
EN 12586-1999 儿童用品 橡皮奶头嘴夹 安全要求和试验方法 Child care articles - Soother holder - Safety requirements and test methods
EN 12626-1997 机械安全 激光加工机械 安全要求 Safety of machinery - Laser processing machines - Safety requirements (ISO 11553:1996 modified)
EN 12628-1999+AC-2000 潜水辅助设备 组合式浮力和救护设备 功能和安全要求、试验方法 Diving accessories - Combined buoyancy and rescue devices - Functional and safety requirements, test methods
EN 1263-1-2002 安全网 第1部分:安全要求 试验方法 Safety nets - Part 1: Safety requirements, test methods
EN 1263-2-2002 安全网 第2部分:定位区域的安全要求 Safety nets - Part 2: Safety requirements for the positioning limits
EN 12653-1999 鞋类 皮革和人造革加工机械 钉钉机 安全要求 Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements
EN 12653/prA1-2001 鞋类 皮革和人造革加工机械 钉钉机 安全要求 修改A1 Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements; Amendment A1
EN 12655-1998 体操设备 吊环 功能和安全要求、试验方法 Gymnastic equipment - Hanging rings - Functional and safety requirements, test methods
EN 12675-2000 交通信号控制器 功能安全要求 Traffic signal controllers - Functional safety requirements
EN 1270-1998+A1-2000 运动场设备 篮球设备 功能和安全要求 试验方法 Playing field equipment - Basketball equipment - Functional and safety requirements, test methods
EN 1271-1998+A1-2000 运动场设备 排球设备 功能和安全要求 试验方法 Playing field equipment - Volleyball equipment - Functional and safety requirements, test methods
EN 1272-1998 儿童保育产品 连椅桌 安全要求和试验方法 Child care articles - Table mounted chairs - Safety requirements and test methods
EN 1273-2001 儿童保育产品 婴儿助行架 安全要求和试验方法 Child care articles - Baby walking frames - Safety requirements and test methods
EN 12882-2001 常用传输带 电气和可燃性安全要求 Conveyor belts for general purpose use - Electrical and flammability safety requirements
EN 13019-2001 路面清洁机械 安全要求 Machines for road surface cleaning - Safety requirements
EN 13021-2003 冬季服务机械 安全要求 Winter service machines - Safety requirements
EN 13035-3-2003 平板玻璃制造、处理和加工用机械和设备 安全要求 第3部分:裁剪机 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines
EN 13035-4-2003 平板玻璃制造、处理和加工用机械和设备 安全要求 第4部分:倾斜台 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables
EN 13042-5-2003 空心玻璃制造、处理和加工用机械和设备 安全要求 第5部分:冲压机 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses
EN 13049-2003 窗 软物和重物撞击 试验方法、安全要求和分类 Windows - Soft and heavy body impact - Test method, safety requirements and classification
EN 13089-1999 登山设备 攀冰工具 安全要求和试验方法 Mountaineering equipment - Ice-tools - Safety requirements and test methods
EN 13112-2002 制革机械 分离机和带刀剪切机 安全要求 Tannery machines - Splitting and bandknife shearing machines - Safety requirements
EN 13113-2002 制革机械 滚筒涂敷机 安全要求 Tannery machines - Roller coating machines - Safety requirements
EN 13114-2002 制革机械 旋转工艺容器 安全要求 Tannery machines - Rotating process vessels - Safety requirements
EN 13138-1-2003 游泳训练用漂浮救生设备 第1部分:穿着漂浮救生设备的 安全要求和试验方法 Buoyant aids for swimming instruction - Part 1: Safety requirements and test methods for buoyant aids to be worn
EN 13138-2-2002 游泳训练用漂浮救生设备 第2部分:手持漂浮救生设备的 安全要求和试验方法 Buoyant aids for swimming instruction - Part 2: Safety requirements and test methods for bouyant aids to be held
EN 13138-3-2003 游泳训练用漂浮救生设备 第3部分:穿着漂浮救生设备的 浮椅 安全要求和试验方法 Buoyant aids for swimming instruction - Part 3: Safety requirements and test methods for swim seats to be worm
EN 13150-2001 实验室工作台 尺寸、安全要求和试验方法 Workbenches for laboratories - Dimensions, safety requirements and test methods
EN 13219-2001 体操设备 蹦床 功能和安全要求 试验方法 Gymnastic equipment - Trampolines - Functional and safety requirements, test methods
EN 13236-2001 超级磨料的安全要求 Safety requirements for superabrasives
EN 13281-2000 内河航行船舶 人行道和工作区的安全要求 Inland navigation vessels - Safety requirements for walkways and working places
EN 13319-2000 潜水附件 深度计和深度、时间组合测量设备 功能和安全要求、试验方法 Diving accessories - Depth gauges and combined depth and time measuring devices - Functional and safety requirements, test methods
EN 1335-2-2000 办公设备 办公椅 第2部分:安全要求 Office furniture - Office work chair - Part 2: Safety requirements
EN 13443-1-2002 建筑物内水调节设备 机械过滤器 第1部分:颗粒级80μm-150μm 性能和安全要求 Water conditioning equipment inside buildings - Mechanical filters - Part 1: Particle rating 80μm to 150μm; Requirements for performances, safety and testing
EN 13451-1-2001 泳池设备 第1部分:一般安全要求和试验方法 Swimming pool equipment - Part 1: General safety requirements and test methods
EN 13451-2-2001+AC-2003 泳池设备 第2部分:阶梯、活梯和手柄弯头的附加特殊安全要求和试验方法 Swimming pool equipment - Part 2: Additional specific safety requirements and test methods for ladders, stepladders and handle bends
EN 13451-3-2001 泳池设备 第3部分:水处理用泳池配件的附加特殊安全要求和试验方法 Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for pool fittings for water treatment purposes
EN 13451-4-2001 泳池设备 第4部分:起跳台的附加特殊安全要求和试验方法 Swimming pool equipment - Part 4: Additional specific safety requirements and test methods for starting platforms
EN 13451-5-2001 泳池设备 第5部分:泳道的附加特殊安全要求和试验方法 Swimming pool equipment - Part 5: Additional specific safety requirements and test methods for lane lines
EN 13451-6-2001 泳池设备 第6部分:转板的附加特殊安全要求和试验方法 Swimming pool equipment - Part 6: Additional specific safety requirements and test methods for turning boards
EN 13451-7-2001 泳池设备 第7部分:水球球门的附加特殊安全要求和试验方法 Swimming pool equipment - Part 7: Additional specific safety requirements and test methods for water polo goals
EN 13451-8-2001 泳池设备 第8部分:备用水部件的附加特殊安全要求和试验方法 Swimming pool equipment - Part 8: Additional specific safety requirements and test methods for leisure water features
EN 13524-2003 公路养护机械 安全要求 Highway maintenance machines - Safety requirements
EN 13613-2001 滚轴运动器械 滑板 安全要求和试验方法 Roller sports equipment - Skateboards - Safety requirements and test methods
EN 13711-2002 内河航运船舶 船舶作业用绞盘 安全要求 Inland navigation vessels - Winches for ship operation - Safety requirements
EN 13743-2001 砂纸安全要求 Safety requirements for coated abrasives
EN 13843-2003 滚轴运动器材 直列式溜冰鞋 安全要求和试验方法 Roller sports equipment - Inline-skates - Safety requirements and test methods
EN 13869-2002 打火机 儿童禁用的打火机 安全要求和试验方法 Lighters - Child-resistance for lighters - Safety requirements and test methods
EN 13899-2003 滚轴运动器材 滚轴滑冰鞋 安全要求和试验方法 Roller sports equipment - Roller skates - Safety requirements and test methods
EN 13951-2003 液泵 安全要求 粮食加工设备 保证使用中的卫生保健设计规程 Liquid pumps - Safety requirements - Agrifoodstuffs equipment; Design rules to ensure hygiene in use
EN 1400-1-2002 儿童用品和保育品 婴儿和儿童用橡皮奶头 第1部分:一般安全要求及产品信息 Child use and care articles - Soothers for babies and young children - Part 1: General safety requirements and product information
EN 14036-2003 婴儿用护理品 婴儿蹦床 安全要求和试验方法 Child use and care articles - Baby bouncers - Safety requirements and test methods
EN 14059-2002 装饰油灯 安全要求和试验方法 Decorative oil lamps - Safety requirements and test methods
EN 1417-1996 橡胶和塑料加工机器 双辊式破碎机 安全要求 Rubber and plastics machines - Two roll mills - Safety requirements
EN 1466-1998+AC-1998 儿童保育品 便携式帆布床和支撑物 安全要求和试验方法 Child care articles - Carry cots and stands - Safety requirements and test methods / Note: To be replaced by prEN 1466 (2003-06).
EN 1501-1-1998 垃圾车及其相关提升设备 一般要求和安全要求 第1部分:后部装载的垃圾车 Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 1: Rear-end loaded refuse collection vehicles
EN 1509-1996 运动场设备 羽毛球设备 功能和安全要求 试验方法 Playing field equipment - Badminton equipment - Functional and safety requirements, test methods
EN 1510-1996 运动场设备 网球设备 功能和安全要求 试验方法 Playing field equipment - Tennis equipment - Functional and safety requirements, test methods
EN 1539-2000 释放可燃物质量 烘干机和烤箱 安全要求 Dryers and ovens, in which flammable substances are released - Safety requirements
EN 1550-1997 机床安全 操作夹具的设计和构造的安全要求 Machine-tools safety - Safety requirements for the design and construction of work holding chucks
EN 1552-2003 地下采矿机械 采掘面上移动采掘机器 安全要求 开辟采掘面机械和刨煤机系统 Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems
EN 1553-1999 农业机械 自行式、悬挂式、半悬挂式和牵引式机械 通用安全要求 Agricultural machinery - Agricultural self-propelled, mounted, semi-mounted and trailed machines - Common safety requirements
EN 1570-1998 升降台的安全要求 Safety requirements for lifting tables
EN 1612-1-1997 橡胶和塑料机械 反应模塑机械 第1部分:测量和混合装置的安全要求 Rubber and plastics machines - Reaction moulding machines - Part 1: Safety requirements for metering and mixing units
EN 1612-2-2000 橡胶和塑料机械 反应模塑机械 第2部分:反应模压车间的安全要求 Rubber and plastics machines - Reaction moulding machines - Part 2: Safety requirements for reaction moulding plant
EN 1651-1999 滑翔设备 背带 安全要求和强度试验 Paragliding equipment - Harnesses - Safety requirements and strength tests
EN 1725-1998 家用家具 床和床垫 安全要求和试验方法 Domestic furniture - Beds and mattresses - Safety requirements and test methods
EN 1727-1998 家用家具 储物家具 安全要求和试验方法 Domestic furniture - Storage furniture - Safety requirements and test methods
EN 1756-1-2001 后置升降装置 安装在用轮子行驶的车辆上的平台式升降装置 安全要求 第1部分:货物用后置升降装置 Tail lifts - Platform lifts for mounting on wheeled vehicles; Safety requirements - Part 1: Tail lifts for goods
EN 1804-1-2001 地下采矿机械 水压坑道顶棚支架的安全要求 第1部分:支撑单位和一般要求 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements
EN 1804-2-2001 地下采矿机械 水压坑道顶棚支架的安全要求 第2部分:动力调整支架和活塞 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams
EN 1808-1999 悬浮通道设备的安全要求 设计计算 稳定性准则 结构试验 Safety requirements on suspended access equipment - Design calculations, stability criteria, construction - Tests
EN 1809-1997 潜水附件 浮力补偿器 功能和安全要求 试验方法 Diving accessories - Buoyancy compensators - Functional and safety requirements, test methods
EN 1834-1-2000 往复式内燃发动机 用在潜在爆炸环境下发动机设计结构和安全要求 第1部分:用在可燃气体和蒸气环境的II组 Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmospheres
EN 1834-2-2000 往复式内燃发动机 用在潜在爆炸环境下发动机设计结构和安全要求 第2部分:对沼气和/或可燃性尘土敏感地下 Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust
EN 1834-3-2000 往复式内燃发动机 用在潜在爆炸环境下发动机设计结构和安全要求 第3部分:用在可燃灰尘环境下的II组发动 Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3: Group II engines for use in flammable dust atmospheres
EN 1845-1998 鞋类制造机械 鞋模机 安全要求 Footwear manufacturing machines - Footwear moulding machines - Safety requirements
EN 1864-1997 内河航运输船舶 舵手室和控制位置 型号和安全要求 Inland navigation vessels - Wheelhouse and control position - Types, safety requirements
EN 1888-2003 儿童保育品 轮式童车 安全要求和试验方法 Child care articles - Wheeled child conveyances - Safety requirements and test methods
EN 1915-1-2001 航行器的地面支撑设备 一般要求 第1部分:基本安全要求 Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements
EN 1930-2000 儿童保育品 安全障碍 安全要求和试验方法 Child care articles - Safety barriers - Safety requirements and test methods
EN 1953-1998 涂覆材料的雾化和喷涂设备 安全要求 Atomising and spraying equipment for coating materials - Safety requirements
EN 201-1997+A1-2000 橡胶和塑料机械 注模机 安全要求 Rubber and plastics machines - Injection moulding machines - Safety requirements
EN 203-1-1992+A1-1995+A2-1999 气体加热供膳设备 第1部分:安全要求 Gas heated catering equipment; part 1: safety requirements
EN 264-1991 采用液体燃料的燃烧设备用安全关闭装置 安全要求和测试 Safety shut-off devices for combustion plants using liquid fuels; safety requirements and testing
EN 289-1993 橡胶和塑料机械 压制和传递模制压力机 设计的安全要求 Rubber and plastics machinery; compression and transfer moulding presses; safety requirements for the design
EN 352-4-2001 听力保护器 安全要求和测试 第4部分:电平依赖的耳套 Hearing protectors - Safety requirements and testing - Part 4: Level -dependent ear-muffs
EN 352-5-2002 听力保护器 安全要求和测试 第5部分:主动噪声降低耳套 Hearing protectors - Safety requirements and testing - Part 5: Active noise reduction ear-muffs
EN 352-6-2002 听力保护器 安全要求和测试 第6部分:带电的音频输入耳套 Hearing protectors - Safety requirements and testing - Part 6: Ear-muffs with electrical audio input
EN 352-7-2002 听力保护器 安全要求和测试 第7部分:与水平相关的耳塞 Hearing protectors - Safety requirements and testing - Part 7: Level-dependent ear-plugs
EN 41003-1998 电信网络连接设备的特殊安全要求 Particular safety requirements for equipment to be connected to telecommunication networks
EN 50063-1989 电阻焊和相关工艺用设备的制造和安装的安全要求 Safety requirements for the construction and the installation of equipment for resistance welding and allied processes
EN 50065-4-2-2001+A1-2003 频率范围为3kHz-148.5KHZ的低压电气设备的信号装置 第4-2部分:低压去耦滤波器 安全要求 Signalling on low voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-2: Low-voltage decoupling filters; Safety requirements
EN 50083-1-1993+A1-1997+A2-1997 电视和声音信号及交互式服务用电缆网络 第1部分:安全要求 Cable networks for television signals, sound signals and interactive services - Part 1: Safety requirements
EN 50165-1997+A1-2001 家用和类似用途的非电子器具用电子设备的安全要求 Electrical equipment of non-electric appliances for household and similar purposes - Safety requirements
EN 50272-2-2001 对次级蓄电池和安装蓄电池的安全要求 第2部分:固定蓄电池 Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries
EN 50272-3-2002 对次级蓄电池和安装蓄电池的安全要求 第3部分:牵引蓄电池 Safety requirements for secondary batteries and battery installations - Part 3: Traction batteries
EN 527-2-2002 办公家具 工作台和办公桌 第2部分:机械安全要求 Office furniture - Work tables and desks - Part 2: Mechanical safety requirements
EN 536-1999 筑路机械 沥青搅拌设备 安全要求 Road construction machines - Asphalt mixing plants - Safety requirements
EN 564-1997 登山设备 辅助绳索 安全要求和试验方法 Mountaineering equipment - Accessory cord - Safety requirements and test methods
EN 565-1997+AC-1997 登山设备 带子 安全要求和试验方法 Mountaineering equipment - Tape - Safety requirements and test methods
EN 566-1997 登山设备 吊索 安全要求和试验方法 Mountaineering equipment - Slings - Safety requirements and test methods
EN 567-1997 登山设备 绳夹 安全要求和试验方法 Mountaineering equipment - Rope clamps - Safety requirements and test methods
EN 568-1997 登山设备 冰锚 安全要求和试验方法 Mountaineering equipment - Ice anchors - Safety requirements and test methods
EN 569-1997 登山设备 岩钉 安全要求和试验方法 Mountaineering equipment - Pitons - Safety requirements and test methods
EN 581-1-1997 户外家具 野营、家用和订做的座椅和桌子 第1部分:一般安全要求 Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 1: General safety requirements
EN 581-3-1999 户外家具 野营、家用和订做的座椅和桌子 第3部分:桌子的机械安全要求和试验方法 Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 3: Mechanical safety requirements and test methods for tables
EN 60065-2002 音频、视频及类似电子设备 安全要求 Audio, video and similar electronic apparatus - Safety requirements (IEC 60065:2001, modified) / Note: Endorsement notice
EN 60143-1-1993 电力系统用串联电容器 第1部分:总则 性能、试验及定额 安全要求 安装导则 Series capacitors for power systems - Part 1: General; Performance, testing and ratin; Safety requirements; Guide for installation
EN 60215-1989 无线电发射设备的安全要求 Safety requirements for radio transmitting equipment (IEC 60215:1987)
EN 60252-1-2001 交流电动机电容器 第1部分:总则 性能、试验和定额 安全要求 安装和运行指南 A.C. motor capacitors - Part 1: General; Performance, testing and rating; Safety requirements; Guide for installation and operation (IEC 60252-1:2001)
EN 60491-1995 摄影用电子闪光装置的安全要求 Safety requirements for electronic flash apparatus for photographic purposes (IEC 60491:1984, modified)
EN 60598-2-19-1989+A2-1998 灯具 第2部分:特殊要求 第19节:通风式灯具(安全要求) Luminaires; part 2: particular requirements; section 19: air-handling luminaires (safety requirements) (IEC 60598-2-19:1981 + AMD 1:1987, modified)
EN 60601-1-1-2001 医用电气设备 第1-1部分:安全通用要求 并列标准:医用电气系统的安全要求 Medical electrical equipment - Part 1-1: General requirements for safety; Collateral standard: Safety requirements for medical electrical systems (IEC 60601-1-1:2000)
EN 60601-2-10-2000+A1-2001 医用电器设备 第2-10部分:神经和肌肉刺激器安全专用要求 Medical electrical equipment - Part 2-10: Particular requirements for the safety of nerve and muscle stimulators (IEC 60601-2-10:1987)
EN 60601-2-11-1997 医疗电气设备 第2-11部分:γ射束治疗设备安全专用要求 Medical electrical equipment - Part 2-11: Particular requirements for the safety of gamma beam therapy equipment (IEC 60601-2-11:1997)
EN 60601-2-17-1996+A1-1996 医疗电气设备 第2-17部分:遥控自动驱动式γ射线后装设备安全专用要求 Medical electrical equipment - Part 2: Particular requirements for the safety of remote-controlled automatically-driven gamma-ray after-loading equipment (IEC 60601-2-17:1989)
EN 60601-2-18-1996+A1-2000 医疗电气设备 第2-18部分:内窥镜设备安全专用要求 Medical electrical equipment - Part 2: Particular requirements for the safety of endoscopic equipment (IEC 60601-2-18:1996)
EN 60601-2-19-1996+A1-1996 医疗电气设备 第2-19部分:婴儿培养箱安全专用要求 Medical electrical equipment - Part 2: Particular requirements for the safety of baby incubators (IEC 60601-2-19:1990)
EN 60601-2-2-2000 医疗电气设备 第2-2部分: 高频手术设备安全专用要求 Medical electrical equipment - Part 2-2: Particular requirements for the safety of high frequency surgical equipment (IEC 60601-2-2:1998)
EN 60601-2-20-1996 医疗电气设备 第2-20部分:运输培养箱安全专用要求 Medical electrical equipment - Part 2-20: Particular requirements for safety of transport incubators (IEC 60601-2-20:1990 + A1:1996)
EN 60601-2-21-1994+A1-1996 医疗电气设备 第2-21部分:婴儿辐射保暖箱安全专用要求 Medical electrical equipment - Part 2: Particular requirements for the safety of infant radiant warmers (IEC 60601-2-21:1994)
EN 60601-2-23-2000 医疗电气设备 第2-23部分:经皮分压监测设备的安全专用要求 Medical electrical equipment - Part 2-23: Particular requirements for the safety, including essential performance, of transcutaneous partial pressure monitoring equipment (IEC 60601-2-23:1999)
EN 60601-2-24-1998 医疗电气设备 第2-24部分:输液泵和控制器的特殊安全要求 Medical electrical equipment - Part 2-24: Particular requirements for the safety of infusion pumps and controllers (IEC 60601-2-24:1998)
EN 60601-2-25-1995+A1-1999 医疗电气设备 第2-25部分:心电图机安全专用要求 Medical electrical equipment - Part 2: Particular requirements for the safety of electrocardiographs (IEC 60601-2-25:1993)
EN 60601-2-26-2003 医用电气设备 第2-26部分:脑电图机安全专用要求 Medical electrical equipment - Part 2-26: Particular requirements for the safety of electroencephalographs (IEC 60601-2-26:2002) / Note: Endorsement notice
EN 60601-2-3-1993+A1-1998 医疗电气设备 第2-3部分:短波治疗设备安全专用要求 Medical electrical equipment; part 2: particular requirements for the safety of short-wave therapy equipment (IEC 60601-2-3:1991)
EN 60601-2-30-2000 医疗电器设备 第2-30部分:自动循环间接血压监视设备和特殊安全要求 Medical electrical equipment - Part 2-30: Particular requirements for the safety, including essential performance, of automatic cycling non-invasive blood pressure monitoring equipment (IEC 60601-2-30:1999)
EN 60601-2-31-1995+A1-1998 医疗电器设备 第2-31部分:具有内部能源的体外心脏起搏器安全专用要求 Medical electrical equipment - Part 2: Particular requirements for the safety of external cardiac pacemakers with internal power source (IEC 60601-2-31:1994)
EN 60601-2-39-1999 医疗电气设备 第2-39部分:腹膜透析设备安全专用要求 Medical electrical equipment - Part 2-39: Particular requirements for the safety of peritoneal dialysis equipment (IEC 60601-2-39:1999)
EN 60601-2-40-1998 医疗电气设备 第2-40部分:电子机动描记器及诱发反映设备安全专用要求 Medical electrical equipment - Part 2-40: Particular requirements for the safety of electromygraphs and evoked response equipment (IEC 60601-2-40:1998)
EN 60601-2-41-2000 医疗电气设备 第2-41部分:外科手术灯和诊断用灯光的安全专用要求 Medical electrical equipment - Part 2-41: Particular requirements for the safety of surgical luminaires and luminaires for diagnosis (IEC 60601-2-41:2000)
EN 60601-2-43-2000 医疗电气设备 第2-43部分:介入过程用X射线设备安全专用要求 Medical electrical equipment - Part 2-43: Particular requirements for the safety of X-ray equipment for interventional procedures (IEC 60601-2-43:2000)
EN 60601-2-45-2001 医用电气设备 第2-45部分:乳腺X射线摄影设备和乳腺摄影立体定位器安全专用要求 Medical electrical equipment - Part 2-45: Particular requirements for the safety of mammographic X-ray equipment and mammographic stereotactic devices (IEC 60601-2-45:2001)
EN 60601-2-46-1998 医用电气设备 第2-46部分:手术台安全专用要求 Medical electrical equipment - Part 2-46: Particular requirements for the safety of operating tables (IEC 60601-2-46:1998)
EN 60601-2-5-2000 医疗电气设备 第2-5部分:超声治疗设备安全专用要求 Medical electrical equipment - Part 2-5: Particular requirements for the safety of ultrasonic physiotherapy equipment (IEC 60601-2-5:2000)
EN 60601-2-50-2002 医用电气设备 第2-50部分:婴儿光治疗设备安全专用要求 Medical electrical equipment - Part 2-50: Particular requirements for the safety of infant phototherapy equipment (IEC 60601-2-50:2000 + Corrigendum March 2001)
EN 60601-2-7-1998 医疗电气设备 第2-7部分:诊断X射线发生装置的高压发生器安全专用要求 Medical electrical equipment - Part 2-7: Particular requirements for the safety of high-voltage generators of diagnostic X-ray generators (IEC 60601-2-7:1998)
EN 60601-2-8-1997+A1-1997 医疗电气设备 第2-8部分:在10 kV至1 MV治疗X射线发生装置安全专用要求 Medical electrical equipment - Part 2: Particular requirements for the safety of therapeutic X-ray equipment operating in the range 10 kV to 1 MV (IEC 60601-2-8:1987)
EN 60601-2-9-1996 医用电器设备 第2-9部分:放射治疗中与患者接触的计量仪与辐射探测器连接的安全专用要求 Medical electrical equipment - Part 2-9: Particular requirements for the safety of patient contact dosemeters used in radiotherapy with electrically connected radiation detectors (IEC 60601-2-9:1996)
EN 60831-1-1996+A2-2003 额定电压1000V及以下交流电系统用自动恢复功能型分流电力电容器 第1部分:总则 性能、试验及评定 安全要 Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 kV - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation (IEC 60831-1:1996)
EN 60871-1-1997 额定电压超过1kV的交流电力系统用并联电容器 第1部分:总则 性能、试验和额定 安全要求 安装和运行指南 Shunt capacitors for a.c. power systems having a rated voltage above 1kV - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation (IEC 60871-1:1997)
EN 60931-1-1996+A1-2003 额定电压1000V(包括1000V)以下的交流系统用非自动恢复型并联电力电容器 第1部分:概述 性能、试验和测定 Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation (IEC 60931-1:1996)
EN 60947-7-3-2002 低压开关装置和控制装置 第7-3部分:辅助设备 引线接线板的安全要求 Low-voltage switchgear and controlgear - Part 7-3: Ancillary equipment; Safety requirements for fuse terminal blocks (IEC 60947-7-3:2002) / Note: Endorsement notice
EN 60968-1990+A1-1993+A2-1999 普通照明用自镇流灯 安全要求 Self-ballasted lamps for general lighting services; safety requirements (IEC 60968:1988, modified)
EN 60999-1-2000 连接器件 铜导线 有螺纹式和无螺纹式夹紧装置的安全要求 第1部分:从0.2-35mm2(包括35mm2)导线用的夹紧 Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2
EN 60999-2-2003 连接器件 电铜导体 有螺钉和无螺钉型的线夹装置的安全要求 第2部分:35mm至300mm导线线夹装置的特殊要求 Connecting devices - Electrical copper conductors; Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm<(hoch)2> up to 300 mm<(hoch)2> (included) (IEC 60999-2
EN 61010-031-2002 测量、控制和实验室用电气设备的安全要求 第3-031部分:电气测量和试验用手持探针组件 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test (IEC 61010-031:2002)
EN 61010-1-2001 测量、控制和实验室用电子设备的安全要求 第1部分:一般要求 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 1: General requirements (IEC 61010-1:2001) / Note: Includes Corrigendum of June 2002
EN 61010-2-010-1994 测量、控制和试验室用电气设备的安全要求 第2-010部分:材料加热 用实验室设备的特殊要求 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials (IEC 61010-2-010:1992, modified)
EN 61010-2-020-1994 测量、控制和试验室用电气设备的安全要求 第2-020部分:实验室离心机的特殊要求 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges (IEC 61010-2-020, modified)
EN 61010-2-032-2002 测量、控制和实验室用电气设备的安全要求 第2-032部分:电气测量和试验用手持和手操作电流传感器的特殊要 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement (IEC 61010-2-032:2002) / Note: Endorsem
EN 61010-2-041-1996 测量、控制和实验室用电气设备的安全要求 第2-41部分:医疗材料处理及实验室加工用蒸压器的的特殊要求 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-041: Particular requirements for autoclaves using steam for the treatment of medical materials, and for laboratory processes (IEC 61010-2-041:1996)
EN 61010-2-042-1997 测量、控制和实验室用电气设备的安全要求 第2-042部分:医用材料处理及实验室加工用毒性气体蒸压器和消毒 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-042: Particular requirements for autoclaves and sterilizers using toxic gas for the treatment of medical materials, and for laboratory processes (IEC 61010)
EN 61010-2-043-1997 测量、控制和实验室用电气设备的安全要求 第2-043部分:医用材料处理及实验室加工用热空气或热惰性气体干 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-043: Particular requirements for dry heat sterilizers using either hot air or hot inert gas for the treatment of medical materials, and for laboratory proc
EN 61010-2-045-2000 测量、控制和实验室用电气设备的安全要求 第2-045部分:医疗、制药、兽医和试验室用洗涤器消毒的特殊要求 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-045: Particular requirements for washer disinfectors used in medical, pharmaceutical, veterinary and laboratory fields (IEC 61010-2-045:2000)
EN 61010-2-051-1995 测量、控制和实验室用电气设备的安全要求 第2-51部分:机械搅拌用实验室设备的特殊要求 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mechanical mixing and stirring (IEC 61010-2-051:1995)
EN 61010-2-061-1996 测量、控制和实验室用电气设备的安全要求 第2-61部分:具有热原子化和离子化的试验室用原子能谱仪的特 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization (IEC 61010-2-061:1995)
EN 61010-2-081-2002 测量、控制和实验室用电气设备的安全要求 第2-81部分:分析和其他用途的自动及半自动试验室设备的特殊 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes (IEC 61010-2-081:2001) / Note: Endorsemen
EN 61010-2-081/prA1-2003 测量、控制和实验室用电气设备的安全要求 第2-81部分:分析和其他用途的自动及半自动试验室设备的特殊 IEC 61010-2-081, A1, Ed. 1: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
EN 61010-2-101-2002 测量、控制和实验室用电气设备的安全要求 第2-101部分:生物体外诊断(IVD)医疗设备的特殊要求 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment (IEC 61010-2-101:2002, modified)
EN 61011-1-1992 与供电干线连接的电池供电的电牧栏增能器的安全要求 Electric fence energizers; safety requirements for battery-operated electric fence energizers suitable for connection to the supply mains (IEC 61011-1:1989, modified)
EN 61011-1992 电牧栏增能器 电网供电的电牧栏增能器的安全要求 Electric fence energizers; safety requirements for mains-operated electric fence energizers (IEC 61011:1989, modified)
EN 61011-2-1992 不与供电干线连接的电池供电的电牧栏增能器的安全要求 Electric fence energizers; safety requirements for battery-operated electric fence energizers not for connection to the supply mains (IEC 61011-2:1990, modified)
EN 61048-1993+A1-1996+A2-1999 管形荧光灯和其它放电电灯电路用电容器的一般要求和安全要求规范 Capacitors for use in tubular fluorescent and other discharge lamp circuits; general and safety requirements (IEC 61048:1991, modified + corrigendum 1992)
EN 61050-1992+A1-1995 空载输出电压超过1000V的管形放电用变压器规范(一般叫做氖管变压器) 一般要求和安全要求 Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon-transformers); general and safety requirements (IEC 61050:1991 + corrigendum 1992, modified)
EN 61204-1995+A1-2001 直流输出的低压电源装置 性能特性和安全要求 Low-voltage power supply devices, d.c. output - Performance characteristics and safety requirements (IEC 61204:1993, modified)
EN 61210-1995 连接器件 铜导线用扁型速接端子 安全要求 Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements (IEC 61210:1993, modified)
EN 61293-1994 电气设备电源额定值的标记 安全要求 Marking of electrical equipment with ratings related to electrical supply - Safety requirements (IEC 61293:1994)
EN 61347-1-2001 灯的控制装置 第1部分:一般要求和安全要求 Lamp controlgear - Part 1: General and safety requirements (IEC 61347-1:2000)
EN 61347-1/prA1-2003 灯的控制装置 第1部分:一般要求和安全要求 修改prA1 IEC 61347-1, Am. 1: Lamp controlgear - Part 1: General and safety requirements
EN 61800-5-1-2003 可调速电力传动系统 第5-1部分:安全要求 电气、热量和能量 Adjustable speed electrical power drive systems - Part 5-1: Safety requirements; Electrical, thermal and energy (IEC 61800-5-1:2003) / Note: Endorsement notice
EN 61984-2001 连接器 安全要求和试验 Connectors - Safety requirements and tests (IEC 61984:2001)
EN 62040-1-1-2003 不间断电源(UPS)规范 第1-1部分 操作区域使用的UPS的一 般要求和安全要求 Uninterruptible power systems (UPS) - Part 1-1: General and safety requirements for UPS used in operator access areas (IEC 62040-1-1:2002 + Corrigendum 2002) / Note: Endorsement notice
EN 62083-2001 医用电气设备 放射治疗计划系统的安全要求 Medical electrical equipment - Requirements for the safety of radiotheraphy treatment planning systems (IEC 62083:2000)
EN 62133-2003 含碱性或其它非酸性电解液的二次电池和电池组 便携式密封二次电池和由它们组成的便携式电池组的安全要求 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications (IEC 62133:2002) / Note: Endorsement notice
EN 710-1997 铸模、制蕊机械、工厂及相关设备的安全要求 Safety requirements for foundry moulding and coremaking machinery and plant and associated equipment
EN 716-1-1995 家具 家用儿童帆布床和折叠床 第1部分:安全要求 Furniture - Childrens cots and folding cots for domestic use - Part 1: Safety requirements
EN 741-2000 连续处理设备和系统 散装材料气动处理用系统及其元件的安全要求 Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials
EN 746-1-1997 工业热处理设备 第1部分:工业热处理设备通用安全要求 Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment
EN 746-2-1997 工业热处理设备 第2部分:燃烧和燃料处理系统的安全要求 Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
EN 746-3-1997 工业热处理设备 第3部分:环境气体产生和使用的安全要求 Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases
EN 746-4-2000 工业热处理设备 第4部分:热浸电镀热处理设备的特殊安全要求 Industrial thermoprocessing equipment - Part 4: Particular safety requirements for hot dip galvanising thermoprocessing equipment
EN 746-5-2000 工业热处理设备 第5部分:盐浴热处理设备的特殊安全要求 Industrial thermoprocessing equipment - Part 5: Particular safety requirements for salt bath thermoprocessing equipment
EN 746-8-2000 工业热处理设备 第8部分:淬火设备的特殊安全要求 Industrial thermoprocessing equipment - Part 8: Particular safety requirements for quenching equipment
EN 747-1-1993 家具 家用床具 第1部分:安全要求 Furniture; bunk beds for domestic use; part 1: safety requirements
EN 747-1/prA1-2000 家具 家用床具 第1部分:安全要求 修改A1 Furniture - Bunk beds for domestic use - Part 1: Safety requirements; Amendment A1
EN 748-1998+A1-1998 运动场设备 足球球门 功能和安全要求、试验方法(包括修改A1) Playing field equipment - Football goals - Functional and safety requirements, test methods (including Amendment 1:1998)
EN 749-1998+A1-1998 运动场设备 手球球门 功能和安全要求、试验方法(包括修改A1) Playing field equipment - Handball goals - Functional and safety requirements, test methods (including Amendment 1:1998)
EN 750-1998+A1-1998 运动场设备 曲棍球球门 功能和安全要求、试验方法(包括修改A1) Playing field equipment - Hockey goals - Functional and safety requirements, test methods (including Amendment 1:1998)
EN 792-1-2000 手持式非电动工具 安全要求 第1部分:非螺纹机械紧固件用组装动力工具 Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners
EN 792-10-2000 手持式非电动工具 安全要求 第10部分:压缩动力工具 Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools
EN 792-11-2000 手持式非电动工具 安全要求 第11部分:毛坯下料机和剪切机 Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears
EN 792-12-2000 手持式非电动工具 安全要求 第12部分:小循环、小振荡和往复式锯 Hand-held non-electric power tools - Safety requirements - Part 12: Small circular, small oscillating and reciprocating saws
EN 792-13-2000 手持式非电动工具 安全要求 第13部分:紧固件传动工具 Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools
EN 792-2-2000 手持式非电动工具 安全要求 第2部分:切割和卷边动力工具 Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools
EN 792-3-2000 手持式非电动工具 安全要求 第3部分:钻孔机和攻丝机 Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers
EN 792-4-2000 手持式非电动工具 安全要求 第4部分:非旋转冲击动力工具 Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools
EN 792-5-2000 手持式非电动工具 安全要求 第5部分:旋转式冲击钻孔机 Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills
EN 792-6-2000 手持式非电动工具 安全要求 第6部分:螺纹紧固件用组装动力工具 Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners
EN 792-7-2001 手持式非电动工具 安全要求 第7部分:研磨机 Hand-held non-electric power tools - Safety requirements - Part 7: Grinders
EN 792-8-2001 手持式非电动工具 安全要求 第8部分:抛光机和磨沙机 Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers
EN 792-9-2001 手持式非电动工具 安全要求 第9部分:硬模研磨机 Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders
EN 809-1998+AC-2002 液体用泵和泵元件 一般安全要求 Pumps and pump units for liquids - Common safety requirements
EN 847-1-1997+AC-1997 木工工具 安全要求 第1部分:铣工具和圆锯刀片 Tools for woodworking - Safety requirements - Part 1: Milling tools and circular saw blades / Note: To be replaced by prEN 847-1 (2003-05).
EN 847-2-2001+AC-2003 木工工具 安全要求 第2部分:装配手柄的铣工具的手柄的要求 Tools for woodworking - Safety requirements - Part 2: Requirements for the shank of shank mounted milling tools
EN 869-1997 高压金属压模铸造器件的安全要求 Safety requirements for high pressure metal diecasting units
EN 892-1996 登山设备 动态登山绳索 安全要求和试验方法 Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods
EN 893-1999 登山设备 鞋底钉 安全要求和试验方法 Mountaineering equipment - Crampons - Safety requirements and test methods
EN 913-1996 体操器材 一般安全要求和试验方法 Gymnastic equipment - General safety requirements and test methods
EN 914-1996 体操器材 双杠和组合式高低杠 功能及安全要求、试验方法 Gymnastic equipment - Parallel bars and combination asymmetric/parallel bars - Functional and safety requirements, test methods
EN 915-1996 体操器材 高低杠 功能及安全要求、试验方法 Gymnastic equipment - Asymmetric bars - Functional and safety requirements, test methods
EN 930-1997 鞋、皮革和仿皮革产品制造机械 固定、刷洗、上光和整理机械 安全要求 Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements
EN 930/prA1-2001 鞋、皮革和仿皮革产品制造机械 固定、刷洗、上光和整理机械 安全要求 修改A1 Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements; Amendment A1
EN 931-1997 鞋制造机械 拉伸机械 安全要求 Footwear manufacturing machines - Lasting machines - Safety requirements
EN 931/prA1-2001 鞋制造机械 拉伸机械 安全要求 修改A1 Footwear manufacturing machines - Lasting machines - Safety requirements; Amendment A1
EN 957-1-1998+A1-1998 固定的训练器材 第1部分:一般安全要求和试验方法(包括修改A1:1998) Stationary training equipment - Part 1: General safety requirements and test methods (including Amendment 1:1998)
EN 957-2-2003 固定的训练器材 第2部分:体力训练器材 附加的特殊安全要求和试验方法 Stationary training equipment - Part 2: Strength training equipment, additional specific safety requirements and test methods
EN 957-4-1996 固定的训练器材 第4部分:体力训练长椅 附加的特殊安全要求和试验方法 Stationary training equipment - Part 4: Strength training benches, additional specific safety requirements and test methods
EN 957-5-1996 固定的训练器材 第5部分:踏板转动训练器材 附加的特殊安全要求和试验方法 Stationary training equipment - Part 5: Pedal crank training equipment, additional specific safety requirements and test methods
EN 957-6-2001 固定的训练器材 第6部分:踏车 附加的特殊安全要求和试验方法 Stationary training equipment - Part 6: Treadmills, additional specific safety requirements and test methods
EN 957-7-1998 固定的训练器材 第7部分:划艇机械 附加的特殊安全要求和试验方法 Stationary training equipment - Part 7: Rowing machines, additional specific safety requirements and test methods
EN 957-8-1998 固定的训练器材 第8部分:跑步机、踏步器和登山器 附加的特殊安全要求和试验方法 Stationary training equipment - Part 8: Steppers, stairclimbers and climbers - Additional specific safety requirements and test methods
EN 957-9-2003 固定的训练器材 第9部分:椭圆形教练器 附加的特殊安全要求和试验方法 Stationary training equipment - Part 9: Elliptical trainers, additional specific safety requirements and test methods
EN 958-1996 登山设备 Klettersteig攀登用能量吸收系统 安全要求和试验方法 Mountaineering equipment - Energy absorbing systems for use in klettersteig (via ferrata) climbing - Safety requirements and test methods
EN 959-1996 登山设备 岩石锚栓 安全要求和试验方法 Mountaineering equipment - Rock anchors - Safety requirements and test methods
EN 972-1998 制革机械 往复滚柱机械 安全要求 Tannery machines - Reciprocating roller machines - Safety requirements
EN 982-1996 机械的安全 流体动力系统及其元件的安全要求 液压装置 Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
EN 983-1996 机械安全 流体动力系统及其元件的安全要求 气压装置 Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
EN 996-1995 打桩设备 安全要求 Piling equipment - Safety requirements
EN ISO 10079-1-1999 医疗吸引设备 第1部分:电动吸引设备 安全要求 Medical suction equipment - Part 1: Electrically powered suction equipment - Safety requirements (ISO 10079-1:1999)
EN ISO 10472-1-1997 工业洗衣机安全要求 第1部分:通用要求 Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997)
EN ISO 10472-2-1997 工业洗衣机安全要求 第2部分:洗衣机和洗涤脱水机 Safety requirements for industrial laundry machinery - Part 2: Washing machines and washer-extractors (ISO 10472-2:1997)
EN ISO 10472-3-1997 工业洗衣机安全要求 第3部分:管道式洗涤(联合)机及相关机械 Safety requirements for industrial laundry machinery - Part 3: Washing tunnel lines including component machines (ISO 10472-3:1997)
EN ISO 10472-4-1997 工业洗衣机安全要求 第4部分:空气干燥机 Safety requirements for industrial laundry machinery - Part 4: Air dryers (ISO 10472-4:1997)
EN ISO 10472-5-1997 工业洗衣机安全要求 第5部分:织物熨烫机、进布机和折布机 Safety requirements for industrial laundry machinery - Part 5: Flatwork ironers, feeders and folders (ISO 10472-5:1997)
EN ISO 10472-6-1997 工业洗衣机安全要求 第6部分:熨烫及熔压机 Safety requirements for industrial laundry machinery - Part 6: Ironing and fusing presses (ISO 10472-6:1997)
EN ISO 11102-1-1997 往复式内燃机 手柄起动装置 第1部分:安全要求和试验 Reciprocating internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests (ISO 11102-1:1997)
EN ISO 11111-1995 纺织机械的安全要求 Safety requirements for textile machinery (ISO 11111:1995)
EN ISO 11442-1-1996 技术产品文件 计算机技术信息处理 第1部分:安全要求 Technical product documentation - Handling of computer-based technical information - Part 1: Security requirements (ISO 11442-1:1993)
EN ISO 11680-1-2000 林业机械 动力杆式修枝锯的安全要求和试验 第1部分:侧挂式杆式修枝锯 Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Units fitted with an integral combustion engine (ISO 11680-1:2000)
EN ISO 11680-2-2000 林业机械 动力杆式修枝锯的安全要求和试验 第2部分:携背负式杆式修枝锯 Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Units for use with a back-pack power source (ISO 11680-2:2000)
EN ISO 11681-2-1998 林业机械 便携式链锯的安全要求和试验 第2部分:修枝锯 Machinery for forestry - Portable chain-saws - Safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:1998)
EN ISO 11681-2/prA1-2003 林业机械 便携式链锯的安全要求和试验 第2部分:修枝锯 修改A1 Machinery for forestry - Portable chain-saws; Safety requirements and testing - Part 2: Chain-saws for tree service; Amendment A1 (ISO 11681-2:1998/FDAM 1:2003) / Note: Intended as an amendment to EN ISO 11681-2 (1998-04).
EN ISO 14620-1-2002 航天系统 安全要求 第1部分:安全系统 Space systems - Safety requirements - Part 1: System safety (ISO 14620-1:2002)
EN ISO 15615-2002 气焊设备 焊接、切割及相关工艺用多种乙炔发生器 高压装置中的安全要求 Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - Safety requirements in high-pressure devices (ISO 15615:2002)
EN ISO 15641-2001 高速切削机床用铣刀 安全要求 Milling cutters for high speed machining - Safety requirements (ISO 15641:2001)
EN ISO 8230-1997 使用全氯乙烯的干洗机的安全要求 Safety requirements for dry-cleaning machines using perchloroethylene (ISO 8230:1997)
EN ISO 8359-1996 医用氧气浓缩器 安全要求 Oxygen concentrators for medical use - Safety requirements (ISO 8359:1996)
ENV 1178-1-1994 家具 家用儿童高椅 第1部分:安全要求 Furniture - Childrens high chairs for domestic use - Part 1: Safety requirements (ISO 9221-1, modified)
ENV 12520-2000 家具 座椅 机械和结构安全要求 Domestic furniture - Seating - Mechanical and structural safety requirements
ENV 12521-2000 家具 桌子 机械和结构安全要求 Domestic furniture - Tables - Mechanical and structural safety requirements
ENV 1729-2-2001 家具 教育部门使用的桌椅 第2部分:安全要求和试验方法 Furniture - Chairs and tables for educational institutions - Part 2: Safety requirements and test methods
ENV 1907-1999 用绳索运送乘客的安全要求 术语 Safety requirements for passenger transportation by rope - Terminology
ENV 581-2-2000 户外家具 野营、家用和订做的座椅和桌子 第2部分:样品的机械安全要求和试验方法 Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 2: Mechanical safety requirements and test methods for sampling
ENV 61400-1-1995 风轮发电机系统 第1部分:安全要求 Wind turbine generator systems - Part 1: Safety requirements (IEC 61400-1:1994)
HD 1000-1988 预制组件制成的服务用和施工用脚手架 材料、尺寸、设计荷载和安全要求 Service and working scaffolds made of prefabricated elements; materials, dimensions, design loads and safety requirements
HD 1004-1992 预制组件制成的移动通道和工作塔 材料、尺寸、设计荷载和安全要求 Mobile access and working towers made of prefabricated elements; materials, dimensions, design loads and safety requirements
HD 280.2 S1-1990 电扇和稳压器的安全要求 第2部分:船用电扇和稳压器 Safety requirements for electric fans and regulators; Part 2: Fans and regulators for use in ships
prEN 1010-1993 印刷和纸张转换机的设计和结构的技术安全要求 Technical safety requirements for the design and construction of printing and paper converting machines
prEN 1178-1-2000 家具 家用儿童高椅 第1部分:安全要求 Furniture - High chairs for domestic use - Part 1: Safety requirements
prEN 12001-2002 用于混凝土和砂浆输送、喷射和布料的机械 安全要求 Conveying, spraying and placing machines for concrete and mortar - Safety requirements
prEN 12044-1998 鞋类、皮革及仿皮革制品制造机械 切割及冲压机械安全要求 Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements
prEN 12151-1995 混凝土和灰浆拌制机械与设备 安全要求 Machinery and plant for the preparation of concrete and mortar - Safety requirements
prEN 12215-1995 涂覆设备 有机液体涂料的喷雾室应用 安全要求 Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements
prEN 12336-1996 隧道机械 盾构、水平推进机和内层安装设备 安全要求 Tunneling machines - Shield machines, horizontal thrustboring machines, lining erection equipment - Safety requirements
prEN 12387-1996 鞋、皮革和人造革制品加工机械 标准尺寸鞋修理设备 安全要求 Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements
prEN 12397-1996 索道乘运安全要求 运行 Safety requirements for passenger transportation by rope - Operation
prEN 12408-1996 乘运索道的安全要求 质量控制 Safety requirements for cableways for passenger transportation by rope - Quality control
prEN 1247-2003 铸造机械 铁水色浇铸设备 离心铸造机械 连续和半连续铸造机械的安全要求 Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines
prEN 12581-1996 涂敷设备 有机液体涂料涂敷用浸渍和电泳涂敷机械 安全要求 Coating plants - Dip and electrophoretic coating machinery for application of organic liquid coating materials - Safety requirements
prEN 12609-1996 混凝土搅拌车 安全要求 Truck mixers - Safety requirements
prEN 12621-1996 涂料压力输送和或供给机械 安全要求 Machinery for the supply and/or circulation of coating materials under pressure - Safety requirements
prEN 12649-1996 混凝土压实机械和抹平机械 安全要求 Concrete compactors and floating machines - Safety requirements
prEN 12757-1-1997 涂层材料的搅拌机械 安全要求 第1部分:整修车辆表面用涂料的搅拌机械 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
prEN 12779-1997 木工机械 固定式木屑和粉尘排除装置 安全相关性能和安全要求 Woodworking machines - Chips- and dust extraction systems with fixed installation - Safety related performance and safety requirements
prEN 12866-1997 天然石料开采和加工机械和设备 金刚石线锯安全要求 Machines and plants for mining and tooling of natural stone - Safety requirements for diamond wire saws
prEN 12867-1997 天然石料开采和加工机械的设备 链式和带式立刨床安全要求 Machines and plants for mining and tooling of natural stone - Safety requirements for chain and belt slotting machines
prEN 12921-1-1997 使用液体或蒸气的对工业品进行表面清洁和预处理的机器 第1部分:通用安全要求 Machines for surface cleaning and pretreatment of industrial items using liquids or vapours - Part 1: Common safety requirements
prEN 12927-1-1997 索道客运的安全要求 钢索 第1部分:钢索及其端部接头的选择准则 Safety requirements for passenger transport by rope - Ropes - Part 1: Selection criteria for ropes and their end fixings
prEN 12927-2-1999 索道客运的安全要求 钢索 第2部分:安全系数 Safety requirements for passenger transportation by rope - Ropes - Part 2: Safety factors
prEN 12927-3-1997 索道客运的安全要求 钢索 第3部分:六股牵引、承载-牵引和拖拉钢索的长绞接 Safety requirements for passenger transport by rope - Ropes - Part 3: Long splicing of 6 strand hauling, carrying-hauling and towing ropes
prEN 12927-4-2001 索道客运的安全要求 钢索 第4部分:端部接头 Safety requirements for passenger transportation by rope - Ropes - Part 4: End fixing
prEN 12927-5-1997 索道客运的安全要求 钢索 第5部分:贮存、运输、安装和拉伸 Safety requirements for passenger transportation by rope - Ropes - Part 5: Storage, transportation, installation and tensioning
prEN 12927-6-1999 索道客运的安全要求 钢索 第6部分:报废标准 Safety requirements for passenger transport by rope - Ropes - Part 6: Discard criteria
prEN 12927-7-1998 索道客运的安全要求 钢索 第7部分:计算、修理和维护 Safety requirements for passenger transportation by rope - Ropes - Part 7: Calculation, repair and maintenance
prEN 12927-8-1998 索道客运的安全要求 钢索 第8部分:无损检测 Safety requirements for passenger transportation by rope - Ropes - Part 8: Non-destructive testing
prEN 12929-1-1997 索道客运的安全要求 总则 第1部分:对所有设备的要求 Safety requirements for passenger transportation by rope - General provisions - Part 1: Requirements for all installations
prEN 12929-2-1998 索道客运的安全要求 总则 第2部分:不带运输车制动器的可反向双线架空索道的附加要求 Safety requirements for passenger transportation by rope - General provisions - Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes
prEN 12930-1997 索道客运的安全要求 计算 Safety requirements for passenger transportation by rope - Calculations
prEN 12981-1997 喷镀设备 有机粉状涂料喷镀间 安全要求 Coating plants - Spray booths for application of organic powder coating material - Safety requirements
prEN 13020-1997 路面处理机械 安全要求 Road-surface-treatment machines - Safety requirements
prEN 13035-10-1997 平板玻璃制造、处理和加工用机械和设备 安全要求 第10部分:研磨和抛光机 Maschines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 10: Grinding and polishing machines
prEN 13035-11-1997 平板玻璃制造、处理和加工用机械和设备 安全要求 第11部分:钻机 Maschines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines
prEN 13035-13-1997 平板玻璃制造、处理和加工用机械和设备 安全要求 第13部分:层压玻璃生产用机械 Maschines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 13: Machines for the production of laminated glass
prEN 13035-14-1997 平板玻璃制造、处理和加工用机械和设备 安全要求 第14部分:镜面喷镀设备 Maschines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 14: Mirror coating plant
prEN 13035-5-1997 平板玻璃制造、处理和加工用机械和设备 安全要求 第5部分:堆卸机械装置 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and destacking
prEN 13035-6-1997 平板玻璃制造、处理和加工用机械和设备 安全要求 第6部分:卸货机 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break out
prEN 13035-7-1997 平板玻璃制造、处理和加工用机械和设备 安全要求 第7部分:层压玻璃裁切机 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass
prEN 13035-8-1997 平板玻璃制造、处理和加工用机械和设备 安全要求 第8部分:生产保温玻璃用的机械和设备 Maschines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 8: Machines and plants for production of insulating glass
prEN 13035-9-1997 平板玻璃制造、处理和加工用机械和设备 安全要求 第9部分:洗涤装置 Maschines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations
prEN 13042-1-1997 空心玻璃制造、处理和加工用机械和设备 安全要求 第1部分:供料机 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder
prEN 13042-10-1999 空心玻璃制造、处理和加工用机械和设备 安全要求 第10部分:实验室玻璃裁切机 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 10: Machines for cutting laboratory glass
prEN 13042-11-1999 空心玻璃制造、处理和加工用机械和设备 安全要求 第11部分:实验室玻璃热处理机 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 11: Machines for thermal processing of laboratory glass
prEN 13042-2-1997 空心玻璃制造、处理和加工用机械和设备 安全要求 第2部分:供料操纵机械 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 2: Handling machines for feeding
prEN 13042-3-1997 空心玻璃制造、处理和加工用机械和设备 安全要求 第3部分:IS机械 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines
prEN 13042-4-1997 空心玻璃制造、处理和加工用机械和设备 安全要求 第4部分:多台位车床 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 4: Multi-station rotating machines
prEN 13042-6-1997 空心玻璃制造、处理和加工用机械和设备 安全要求 第6部分:多台位多级检验机 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 6: Multi-station multi-inspection machines
prEN 13042-7-1997 空心玻璃制造、处理和加工用机械和设备 安全要求 第7部分:移动探头检验机 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 7: Travelling head inspection machine
prEN 13042-8-1997 空心玻璃制造、处理和加工用机械和设备 安全要求 第8部分:固定探头检验机 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 8: Fixed head inspection machines
prEN 13042-9-1997 空心玻璃制造、处理和加工用机械和设备 安全要求 第9部分:撞击试验机 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 9: Impact testing machines
prEN 13107-1997 索道客运的安全要求 土木工程 Safety requirements for passenger transportation by rope - Civil engineering works
prEN 13209-1-2001 儿童使用和看护用品 婴儿车 安全要求和试验方法 第1部分:框背车 Child use and care articles - Child carriers; Safety requirements and test methods - Part 1: Framed back carriers
prEN 13209-1998 儿童看护用品 婴儿车 安全要求和试验方法 Child care articles - Baby carriers - Safety requirements and test methods
prEN 13210-2001 儿童使用和看护用品 儿童马具、缰绳及类似物品 安全要求和试验方法 Child use and care articles - Childrens harnesses, reins and similar type articles - Safety requirements and test methods
prEN 13223-1998 索道客运的安全要求 机械 Safety requirements for passenger transportation by rope - Mechanics
prEN 13243-1998 索道客运的安全要求 电气设备 Safety requirements for passenger transportation by rope - Electrical devices
prEN 13355-1998 喷镀设备 合成间 安全要求 Coating plants - Combines booths - Safety requirements
prEN 13386-1998 液泵 潜水泵和泵部件 特殊安全要求 Liquid pumps - Submersible pumps and pump units - Particular safety requirements
prEN 13418-1999 橡胶和塑料机械 薄膜或板材卷绕机 安全要求 Rubber and plastics machines - Winding machines for film or sheet - Safety requirements
prEN 13443-2-2002 建筑物内水调节设备 机械过滤器 第2部分:颗粒级1μm到80μm以下 性能和安全要求 Water conditioning equipment inside buildings - Mechanical filters - Part 2: Particle rating 1 micrometre to less than 80 micrometres - Requirements for performance, safety and testing
prEN 13451-10-2001 泳池设备 第10部分:跳台、跳板和相关设备的附加特殊安全要求和试验方法 Swimming pool equipment - Part 10: Additional specific safety requirements and test methods for diving platforms, diving springboards and associated equipment
prEN 13451-11-2003 泳池设备 第11部分:可移动池地板和池壁的附加特殊安全要求和试验方法 Swimming pool equipment - Part 11: Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads
prEN 13457-1999 制鞋、皮革和人造革用机械 分离、切片、修整、胶合及胶合烘干机械 安全要求 Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, trimming, cementing and cement drying machines - Safety requirements
prEN 13675-1999 机械安全性 轧管和滚轧机及线材加工设备的安全要求 Safety of machinery - Safety requirements for tube forming and rolling mills and finishing line equipment
prEN 13796-1-2002 索道客运的安全要求 承载器 第1部分:手柄、座舱、椅子、T形条和小底板 Safety requirements for cableway installations designed to carry persons - Carriers - Part 1: Grips, carrier truks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers
prEN 13796-3-2002 索道客运的安全要求 承载器 第3部分:疲劳试验 Safety requirements for cableway installations designed to carry persons - Carriers - Part 3: Fatigue testing
prEN 13954-2000 食品加工机械 面包切片机 卫生和安全要求 Food processing machinery - Bread slicers - Safety and hygiene requirements
prEN 14344-2001 儿童用品 童车座椅 试验方法和安全要求 Child care articles - Child seats for cycles - Safety requirements and test methods
prEN 14372-2002 儿童用品 餐具和喂食器具 试验和安全要求 Child use and care articles - Cutlery and feeding utensils - Safety requirements and tests
prEN 14413-1-2003 娱乐潜水服务 自带潜水呼吸器的指导训练的最低安全要求 第1部分:1级 Recreational diving services - Safety related minimum requirements for the training of scuba instructors - Part 1: Level 1
prEN 14413-2-2003 娱乐潜水服务 自带潜水呼吸器的指导训练的最低安全要求 第2部分:2级 Recreational diving services - Safety related minimum requirements for the training of scuba instructors - Part 2: Level 2
prEN 14434-2002 公共教育用写字台 人类工效学技术和安全要求和其试验方法 Writing board for educational institutions - Ergonomic, technical and safety requirements and their test methods
prEN 14461-2002 工业风扇 安全要求 Industrial fans - Safety requirements
prEN 14468-1-2003 乒乓球 第1部分:乒乓球台 试验方法和、功能和安全要求 Table tennis - Part 1: Table tennis tables, functional and safety requirements, test methods
prEN 1466-2003 儿童保育品 便携式帆布床和支撑物 安全要求和试验方法 Child care and use articles - Carry cots and stands - Safety requirements and test methods / Note: Intended as replacement for EN 1466 (1998-01).
prEN 1501-2-2000 垃圾车及其相关提升设备 一般要求和安全要求 第2部分:边侧装载的垃圾车 Refuse collection vehicles and their associated lifting device - General requirements and safety requirements - Teil 2: Side loaded refuse collection vehicles
prEN 1672-1-2000 食品加工机械 基本设计原理 第1部分:安全要求 Food processing machinery - Basic concepts - Part 1: Safety requirements
prEN 1709-1994 输送旅客的缆车安全要求 试运转前的检验 维护和操作试验 Safety requirements for cableways for passenger transport - Precommissioning inspection, maintenance and operational tests
prEN 1710-2003 地下采矿机械 具有沼气危险采矿区域的应用条件 安全要求 Equipment and components intended for use in potentially explosive atmospheres in mines
prEN 1743-1-1994 家具 野营家用和承包用户外餐桌 家用和公共场所 第1部分:一般安全要求 Furniture - Outdoor tables for camping, domestic and contract use - Part 1: General safety requirements
prEN 1743-2-1994 家具 家用、承包和野营用户外餐桌 第2部分:机械安全要求和试验 Furniture - Outdoor tables for domestic, contract and camping use - Part 2: Mechanical safety requirements and test methods
prEN 1756-2-1997 后置升降装置 安装在用轮子行驶的车辆上的平台式升降装置 安全要求 第2部分:乘客用后置升降装置 Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 2: Tail lifts for passengers
prEN 1777-1994 防火设备用水压平台 安全要求和测试 Hydraulic platforms (HPs) for fire services - Safety requirements and testing
prEN 1804-3-2000 地下采矿机械 水压坑道顶棚支架的安全要求 第3部分:水压控制系统 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems
prEN 1829-1-2003 高压清洗器 高压水喷射机 安全要求 High pressure cleaners - High pressure water jet machines - Safety requirements; Part 1: General description
prEN 1887-2001 儿童保育品 可变高度椅子 安全要求和试验方法 Child care articles - Convertible high chairs - Safety requirements and test methods
prEN 1908-1995 用绳索运送乘客的安全要求 紧系装置 Safety requirements for passenger transportation by rope - Tensioning devices
prEN 1909-1995 用绳索运送乘客的安全要求 救险与疏散 Safety requirements for passenger transportation by rope - Recovery and evacuation
prEN 203-1-2002 气体加热供膳设备 第1部分:安全要求 Gas heated catering equipment - Part 1: safety requirements
prEN 289-2000 橡胶和塑料机械 压力机 安全要求 Rubber and plastics machines - Presses - Safety requirements
prEN 45545-5-2003 铁路应用 铁路车辆的防火 第5部分:包括母线电器设备防火安全要求和磁悬浮列车 Railway applications - Fire protection on railway vehicles - Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles
prEN 50115-1995 医用电气设备 第2部分:手术台的特殊的安全要求 Medical electrical equipment - Part 2: Particular safety requirements for operating tables
prEN 50158-1993 信息技术设备中供电的安全要求 Safety requirements for power feeding in information technology installations
prEN 50188-1994 电动工具 环行锯工作台 安全要求和测试 Electric motor-operated tools; tables for circular saws; safety requirements and tests
prEN 50276-1997 牵引蓄电池产生的气体发射 封闭式充电区的通风和安全要求 Gaseous emissions produced by traction batteries - Ventilation and general safety requirements for closed charging areas
prEN 50280-1997 小的发射/接收天线系统 安全要求 Small transmitting/receiving antenna systems - Safety requirements
prEN 50331-1-1999 建筑物内的光电系统 第1部分:安全要求 Photovoltaic systems in buildings - Part 1: Safety requirements
prEN 61010-2-010-2003 测量、控制和试验室用电气设备的安全要求 第2-010部分:材料加热 用实验室设备的特殊要求 草案 IEC 61010-2-010, Ed. 2: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of material
prEN 61010-2-041-1996 测量、控制和实验室用电气设备的安全要求 第2-41部分:医疗材料处理及实验室加工用蒸压器的的特殊要求 Draft IEC 1010-2-041: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-041: Particular requirements for autoclaves using steam for the treatment of medical materials, and for laboratory processes
prEN 61010-2-051-2003 测量、控制和实验室用电气设备的安全要求 第2-51部分:机械搅拌用实验室设备的特殊要求 草案 IEC 61010-2-081, A1, Ed. 1: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
prEN 61010-2-061-2003 测量、控制和实验室用电气设备的安全要求 第2-61部分:具有热原子化和离子化的试验室用原子能谱仪的特 IEC 61010-2-061, Ed. 2: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
prEN 61010-2-071-1998 测量、控制和实验室用电气设备的安全要求 第2-71部分: IEC 61010-2-071: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-071: Particular requirements for equipment used in extended environments
prEN 61048-2001 管形荧光灯和其它放电电灯电路用电容器的一般要求和安全要求规范 草案 Draft IEC 61048, Ed. 2: Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements
prEN 61400-1-2003 风轮发电机系统 第1部分:安全要求 Wind turbine generator systems - Part 1: Safety requirements (IEC 61400-1:1999, modified) / Note: Intended as replacement for ENV 61400-1 (1995-02).
prEN 616-1991 连续操作设备和系统 设计、制造、安装和试运转阶段的通用安全要求 Continuous handling equipment and systems; common safety requirements for design, manufacturing, erection and commissioning stages
prEN 61814-1997 人体接触电极器具 没有医疗监督条件下使用的安全要求 IEC 61814: Appliances with human body contact electrodes - Safety requirements for use without medical supervision
prEN 716-3-2000 家具 家用儿童帆布床和折叠床 第3部分:折叠床的附加安全要求和试验方法 Furniture - Childrens cots and folding cots for domestic use - Part 3: Additional safety requirements and test methods for folding cots
prEN 746-6-1994 工业热处理设备 第6部分:液态处理热处理设备的特殊安全要求 Industrial thermoprocessing equipment - Part 6: Particular safety requirements for liquid phase treatment thermoprocessing equipment
prEN 746-7-1994 工业热处理设备 第7部分:真空热处理设备的特殊安全要求 Industrial thermoprocessing equipment - Part 7: Special safety requirements for vacuum thermoprocessing equipment
prEN 792-14-1995 手持式非电动工具 安全要求 第14部分:非螺纹机械紧固件用组装动力工具 Hand-held non electric power tools - Safety requirements - Part 14: Assembly power tools for non-threaded mechanical fasteners
prEN 792-15-1995 手持式非电动工具 安全要求 第15部分:切割和卷边动力工具 Hand-held non electric power tools - Safety requirements - Part 15: Cutting-off and crimping power tools
prEN 847-3-2001 木工工具 紧固装置 第3部分:安全要求 Tools for woodworking - Clamping devices - Part 3: Safety requirements
prEN 892-2002 登山设备 动态登山绳索 安全要求和试验方法 Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods
prEN ISO 10821-1998 工业缝纫机 缝纫机、装置和系统的安全要求 Industrial sewing machines - Safety requirements for sewing machines, units and systems (ISO/DIS 10821:1998)
prEN ISO 11111-1-2002 纺织机械 安全要求 第1部分:一般要求 Textile machinery - Safety requirements - Part 1: Common requirements (ISO/DIS 11111-1:2002)
prEN ISO 11111-2-2002 纺织机械 安全要求 第2部分:纺纱准备机和纺纱机 Textile machinery - Safety requirements - Part 2: Spinning preparatory and spinning machines (ISO/DIS 11111-2:2002)
prEN ISO 11111-3-2002 纺织机械 安全要求 第3部分:无纺纱机 Textile machinery - Safety requirements - Part 3: Nonwoven machinery (ISO/DIS 11111-3:2002)
prEN ISO 11111-4-2002 纺织机械 安全要求 第4部分:纱线加工机及制绳机 Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO/DIS 11111-4:2002)
prEN ISO 11111-5-2002 纺织机械 安全要求 第5部分:编织和针织准备机 Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and knitting (ISO/DIS 11111-5:2002)
prEN ISO 11111-6-2002 纺织机械 安全要求 第6部分:织物制造机 Textile machinery - Safety requirements - Part 6: Fabric manufacturing machinery (ISO/DIS 11111-6:2002)
prEN ISO 11111-7-2002 纺织机械 安全要求 第7部分:印染机和精整机 Textile machinery - Safety requirements - Part 7: Dyeing and finishing machines (ISO/DIS 11111-7:2002)
prEN ISO 11553-1-2002 机械安全 激光加工机械 安全要求 Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO/DIS 11553-1:2002) / Note: Intended as replacement for EN 12626 (1997-02).
prEN ISO 11681-1-2002 林业机械 便携式链锯的安全要求和试验 第1部分:林业专用链锯 Machinery for forestry - Portable chain-saws; Safety requirements and testing - Part 1: Chain-saws for nomal forest work (ISO/DIS 11681-1:2002)
prEN ISO 12402-1-2003 个人救生装置 第1部分:A级(SOLAS救生衣)的安全要求 Personal flotation devices - Part 1: Lifejackets for seagoing ships; Safety requirements (ISO/DIS 12402-1:2003)
prEN ISO 12402-2-2003 个人救生装置 第2部分:B级(海边救生衣、极限条件275牛顿)的安全要求 Personal flotation devices - Part 2: Lifejackets for extreme offshore conditions (level 275); Safety requirements (ISO/DIS 12402-2:2003)
prEN ISO 12402-3-2003 个人救生装置 第3部分:C级(近海救生衣、150牛顿)的安全要求 Personal flotation devices - Part 3: Lifejackets for offshore conditions (level 150); Safety requirements (ISO/DIS 12402-3:2003)
prEN ISO 12402-4-2003 个人救生装置 第4部分:D级(内陆/海边救生衣、100牛顿)的安全要求 Personal flotation devices - Part 4: Lifejackets for inland/close to shore conditions (level 100); Safety requirements (ISO/DIS 12402-4:2003)
prEN ISO 12402-5-2003 个人救生装置 第5部分:E级(飘浮装置、50牛顿)的安全要求 Personal flotation devices - Part 5: Buoyancy aids (level 50); Safety requirements (ISO/DIS 12402-5:2003)
prEN ISO 12402-8-2003 个人救生装置 第8部分:附属装置的安全要求及试验方法 Personal flotation devices - Part 8: Accessories; Safety requirements and test methods (ISO/DIS 12402-8:2003)
prEN ISO 6218-2002 内河船舶 推拖用手操作连接设备 安全要求与主要尺寸 Inland navigation vessels - Manually operated coupling devices for push tows - Safety requirements and main dimensions (ISO/DIS 6218:2002)
prHD 25395.1-1986 电动草坪割草机、草坪用拖拉机、带割草附件的草坪用及花园用拖拉机 安全要求和试验程序 第1部分:定义 Power lawn mowers, lawn tractors, and lawn and garden tractors with mowing attachments; safety requirements and test procedures; part 1: definitions
prHD 25395.2-1986 电动草坪割草机、草坪用拖拉机、带割草附件的草坪用及花园用拖拉机 安全要求和试验程序 第2部分:基本要 Power lawn mowers, lawn tractors and lawn and garden tractors with mowing attachments; safety requirements and test procedures; part 2: basic requirements
prHD 25395.3-1986 电动草坪割草机、草坪用拖拉机、带割草附件的草坪用及花园用拖拉机 安全要求和试验程序 第3部分:旋转割 Power lawn mowers, lawn tractors and lawn and garden tractors with mowing attachments; safety requirements and test procedures; part 3: requirements for rotary mowers
prHD 25395.4-1986 电动草坪割草机、草坪用拖拉机、带割草附件的草坪用及花园用拖拉机 安全要求和试验程序 第4部分:滚筒(卷 Power lawn mowers, lawn tractors and lawn and garden tractors with mowing attachments; safety requirements and test procedures; part 4: requirements for cylinder (reel) mowers
编号中文名称英文名称

返回