美国安全要求标准(ANSI safety requirement standards)

ANSI |  BS |  DIN |  EN |  GB |  IEC |  ISO |  JIS |  NF |  DIC
编号中文名称英文名称
ANSI A10.12-1998 挖土的安全要求 Safety Requirements for Excavation
ANSI A10.13-2001 钢结构安装的安全要求 Safety Requirements for Steel Erection
ANSI A10.15-1995 建筑施工和拆除工作.挖泥作业的安全要求 Construction and Demolition Operations - Dredging, Safety Requirements for
ANSI A10.16-1995 建筑施工和拆除工作.隧道、竖井和藻井的安全要求 Construction and Demolition Operations - Safety Requirements for Tunnels, Shafts, and Caissons
ANSI A10.18-1996 建筑施工和拆除工作.临时脚踏板和墙口、楼梯和其他无保护边缘的安全要求 Construction and Demolition Operations - Safety Requirements for Temporary Floor Holes, Wall Openings, Stairways and Other Unprotected Edges
ANSI A10.20-2005 瓷砖、水磨石和大理石作业的安全要求 Safety Requirements for Ceramic Tile, Terrazo, and Marble Work
ANSI A10.22-1990 带导向绳索和非导向绳索的载人用升降机.安全要求 Rope-Guided and Nonguided Worker's Hoists - Safety Requirements
ANSI A10.24-2006 屋面材料.低斜坡屋面的安全要求 Roofing - Safety Requirements for Low-Sloped Roofs
ANSI A10.27-1998 热混沥青设备的安全要求 Safety Requirements for Hot Mix Asphalt Facilities
ANSI A10.28-1998 起重机或转臂起重机的悬吊工作平台.安全要求 Work Platforms Suspended from Cranes or Derricks - Safety Requirements
ANSI A10.32-2004 建设和拆毁工作中防人员跌落的安全要求 Personal Fall Protection Safety Requirements for Construction, Demolition Operations
ANSI A10.4-2004 载人升降机和雇员用电梯的安全要求 Safety Requirements for Personnel Hoists and Employee Elevators
ANSI A10.7-1998 建筑施工和拆除.商业炸药和起爆剂.运输、存储、装卸和使用的安全要求 Construction and Demolition - Commercial Explosives and Blasting Agents - Safety Requirements for Transportation, Storage, Handling and Use
ANSI A10.8-2001 脚手架的安全要求 Safety Requirements for Scaffolding
ANSI A14.1-2000 楼梯.便携式木梯的安全要求 Ladders - Portable Wood, Safety Requirements for
ANSI A14.2-2000 便携式金属梯的安全要求 Portable Metal Ladders, Safety Requirements for
ANSI A14.3-2002 木梯.固定安全要求 Ladders - Fixed - Safety Requirements
ANSI A14.4-2002 工地用木梯的安全要求 Job-Made Wooden Ladders, Safety Requirements for
ANSI A14.5-2000 楼梯.便携式增强塑料的安全要求 Ladders - Portable Reinforced Plastic - Safety Requirements
ANSI A14.9-2004 吊装暗式爬高系统的安全要求 Safety Requirements for Ceiling Mounted Disappearing Climbing Systems
ANSI ASBZ 50.1-2006 面包店设备.安全要求 Bakery Equipment - Safety Requirements
ANSI ATIS0300276.a-2005 操作、管理、维护和保障.公共通信网络的安全要求:作为阻止有害通信的包过滤附加要求的管理平面用安全要求基 Operations, Administration, Maintenance, and Provisioning - Security Requirements for the Public Telecommunications Network: A Baseline of Security Requirements for the Management Plane, to add requirements to support Packet Filtering for the Prevention of Unwanted Traffic
ANSI B11.1-2001 机床.机械动力压力机.制造、维护和使用的安全要求 Machine Tools - Mechanical Power Presses - Safety Requirements for Construction, Care, and Use
ANSI B11.10-2003 金属锯床的制造、维护和使用的安全要求 Metal Sawing Machines, Safety Requirements for Construction, Care, and Use of
ANSI B11.11-2001 齿轮切割机的制造、维护和使用的安全要求 Gear Cutting Machines, Safety Requirements for the Construction, Care, and Use of
ANSI B11.12-2005 机床.滚轧成型和滚轧弯曲机床.制造、维护和使用的安全要求 Machine Tools - Roll-Forming and Roll-Bending Machines - Safety Requirements for the Construction, Care, and Use
ANSI B11.13-1992 机床.单轴、多轴自动棒材、卡盘机床.制造、维护和使用的安全要求 Machine Tools - Single- and Multiple-Spindle Automatic Bar and Chucking Machines - Safety Requirements for Construction, Care and Use
ANSI B11.14-1996 机床.卷材纵向切分机的制造、维护和使用的安全要求 Machine Tools - Coil-Slitting Machines Safety Reqirements for Construction, Care, and Use
ANSI B11.15-2001 管道和型材弯曲机的制造、维护和使用的安全要求 Pipe, Tube, and Shape Bending Machines, Safety Requirements for Construction, Care, and Use
ANSI B11.16-2003 粉末/金属压力机的安全要求 Safety Requirements for Powder / Metal Compacting Presses
ANSI B11.17-2004 机床.卧式液力挤压机的制造、维护和使用的安全要求 Machine Tools - Horizontal Hydraulic Extrusion Presses,- Safety Requirements for Construction, Care, and Use
ANSI B11.20-2004 机床.生产系统/元件.制造、维护和使用的安全要求 Machine Tools - Manufacturing Systems/Cells - Safety Requirements for Construction, Care, and Use
ANSI B11.22-2001 旋转中心和自动数控旋转机器的安全要求 Safety Requirements for Turning Centers and Automatic Numerically Controlled Turning Machines
ANSI B11.23-2001 组合加工中心机床和自动数控铣床、钻床和镗床的安全要求 Safety Requirements for Machining Centers and Automatic Numerically Controlled Milling, Drilling and Boring Machines
ANSI B11.24-2001 转印机的安全要求 Safety Requirements for Transfer Machines
ANSI B11.3-2002 动力压力制动器的制造、维护和使用的安全要求 Power Press Brakes, Safety Requirements for the Construction, Care, and Use of
ANSI B11.4-2003 机床.剪床的安全要求 Machine Tools - Safety Requirements for Shears
ANSI B11.5-1988 机床.钢铁制品.制造、维护和使用的安全要求 Machine Tools - Ironworkers - Safety Requirements for Construction, Care and Use
ANSI B11.6-2001 车床的制造、维护和使用的安全要求 Lathes, Safety Requirements for the Construction, Care, and Use of
ANSI B11.8-2001 钻床、铣床和镗床的制造、维护和使用的安全要求 Drilling, Milling, and Boring Machines, Safety Requirements for the Construction, Care, and Use of
ANSI B11.9-1975 机床.磨床的制造、维护和使用的安全要求 Safety Requirements for the Construction, Care and Use of Grinding Machines
ANSI B151.15-1985 塑料机械.挤注吹塑机.制造,维护和使用的安全要求 Plastics Machinery - Extrusion Blow Molding Machines - Safety Requirements for Construction, Care and Use
ANSI B154.1-2004 铆接设备制造、维护和使用的安全要求 Rivet Setting Equipment, Safety Requirements for Construction, Care, and Use of
ANSI B165.1-2005 电动工具.电驱动涂刷工具.设计、保养和使用的安全要求 Power Tools - Power-Driven Brushing Tools - Safety Requirements for Design, Care, and Use
ANSI B175.1-2000 汽油动力链锯的安全要求 Gasoline Powered Chain Saws, Safety Requirements for
ANSI B175.4-2006 便携式、手持式、内燃机驱动切割机的安全要求 Portable, Handheld, Internal Combustion Engine Driven Cut-Off Machines - Safety Requirements
ANSI B65.2-2005 图形技术.装订及精整系统和设备的安全要求 Graphic technology - Safety requirements for binding and finishing systems and equipment
ANSI B7.7-2003 涂磨料的研磨材料的安全要求 Safety Requirements for Abrading Materials with Coated Abrasives Systems
ANSI B71.4-2004 商用草皮维护设备.安全要求 Commercial Turf Care Equipment - Safety Specifications
ANSI B77.2-2004 缆车.安全要求 Funiculars - Safety Requirements
ANSI K61.1-1999 无水氨存储和搬运的安全要求 Safety Requirements for the Storage and Handling of Anhydrous Ammonia
ANSI MH29.2-2000 工业用倾斜架的安全要求 Safety Requirements for Industrial Tilters
ANSI O1.1-2004 木工机械.安全要求 Woodworking Machinery - Safety Requirements
ANSI PH3.61-1974 消费者用摄影幻灯片放映机的安全要求 Safety Requirements for Photographic Slide Projectors for Consumer Use
ANSI SNT 101-2002 动力工具.便携式压缩空气驱动的紧固件旋入工具的安全要求 Power Tools - Portable, Compressed Air Actuated, Fastener Driving Tools - Safety Requirements for
ANSI SNT-101-1993 动力工具.便携式压缩空气驱动的紧固驱动工具.安全要求 Power Tools - Portable, Compressed-Air-Actuated, Fastener Driving Tools - Safety Requirements for
ANSI SNT101-2002 动力工具.便携式压缩空气驱动的紧固件旋锯安全要求 Power Tools - Portable, Compressed Air Actuated, Fastener Driving Tools - Safety Requirements for
ANSI T1.276-2003 操作、管理、维护和保障.公用电信网的安全要求:管理面的安全要求基线 Operations, Administration, Maintenance, and Provisioning - Security Requirements for the Public Telecommunications Network: A Baseline of Security Requirements for the Management Plane
ANSI Z117.1-2003 有限空间的安全要求 Safety Requirements for Confined Spaces
ANSI Z244.1-2003 能源的切断/警告标记的安全要求 Lock Out/Tag Out of Energy Sources, Safety Requirements for the
ANSI Z245.1-1999 垃圾的收集、处理和处置设备.移动式垃圾收集和压实设备.安全要求 Refuse Collection, Processing, and Disposal Equipment - Mobile Refuse Collection and Compaction Equipment - Safety Requirements
ANSI Z245.2-1997 废物和可循环材料用设备技术和运行.固定式压缩机.安全要求. Equipment Technology and Operations for Wastes and Recyclable Materials -Stationary Compactors - Safety Requirements
ANSI Z245.30-1999 垃圾的收集、处理和处置设备.垃圾箱.安全要求 Refuse Collection, Processing, and Disposal Equipment - Waste Containers - Safety Requirements
ANSI Z245.41-1997 废物和可循环材料的设备技术和运行.混合可再循环材料的加工设施.安全要求 Equipment Technology and Operations for Wastes and Recyclable Materials - Facilities for the Processing of Commingled Recyclable Materials - Safety Requirements
ANSI Z245.5-1997 废物和可循环材料的设备技术和运行.打包设备.安全要求 Equipment Technology and Operations for Wastes and Recyclable Materials - Baling Equipment - Safety Requirements
ANSI Z8.1-1996 商业洗衣房和干洗操作.安全要求 Commercial laundry and drycleaning operations - Safety requirements
ANSI/ALI ALIS-2001 自动提升机.安装和运行的安全要求 Automotive Lifts - Safety Requirements for Installation and Service
ANSI/ALI ALOIM-2000 自动电梯.操作、检测和维护的安全要求 Automotive Lifts - Safety Requirements for Operation, Inspection and Maintenance
ANSI/ALI B153.1-1990 自动升降机.建造、保养和使用的安全要求 Automotive Lifts - Safety Requirements for the Construction, Care, and Use
ANSI/ASME B107.41M-2004 钉锤.安全要求 Nail Hammers - Safety Requirements
ANSI/ASME B107.42M-1997 手斧.安全要求 Hatchets - Safety Requirements
ANSI/ASME B107.43M-1998 木材劈裂楔.安全要求 Wood Splitting Wedges - Safety Requirements
ANSI/ASME B107.44M-2002 玻璃匠凿和木工凿.安全要求 Glaziers' Chisels and Wood Chisels - Safety Requirements
ANSI/ASME B107.45M-2002 细长凿和地板/电工用凿.安全要求 Ripping Chisels and Flooring/Electricians' Chisels - Safety Requirements
ANSI/ASME B107.46M-2004 螺柱、螺钉和管取出器.安全要求 Stud, Screw and Pipe Extractors - Safety Requirements
ANSI/ASME B107.48-2005 金属凿、凿孔机和冲钉:安全要求 Metal Chisels, Punches, and Drift Pins: Safety Requirements
ANSI/ASME B107.49M-2004 钉子.安全要求 Nail Sets - Safety Requirements
ANSI/ASME B107.50M-1998 手工工具.砖凿和劈砖枕垫.安全要求 Hand Tools - Brick Chisels and Brick Sets - Safety Requirements
ANSI/ASME B107.51-2001 星形钻头.安全要求 Star Drills - Safety Requirements
ANSI/ASME B107.52M-1998 拔钉器棒.安全要求 Nail-Puller Bars - Safety Requirements
ANSI/ASME B107.53M-2004 手工工具.圆头锤.安全要求 Hand Tools - Ball Peen Hammers - Safety Requirements
ANSI/ASME B107.54-2001 重击工具.安全要求 Heavy Striking Tools - Safety Requirements
ANSI/ASME B107.56-1999 壳体修理锤和垫块:安全要求 Body Repair Hammers and Dolly Blocks: Safety Requirements
ANSI/ASME B107.58M-1998 铆锤、敲除水垢用锤和锡工用小锤.安全要求 Riveting, Scaling, and Tinners' Setting Hammers - Safety Requirements
ANSI/ASSE A10.5-2006 物料升降机安全要求 Safety Requirements for Material Hoists
ANSI/ASTM F2173-2002 监测病人呼吸混合物的氧监测器.安全要求 ISO 7767, Oxygen Monitors for Monitoring Patient Breathing Mixtures - Safety Requirements
ANSI/ASTM F2265-2003 医用抽吸设备.第1部分:电动抽吸设备.安全要求 Medical Suction Equipment - Part 1: Electrically Powered Suction Equipment - Safety Requirements
ANSI/HTI B173.4-1991 斧子.安全要求 Axes - Safety Requirements
ANSI/HTI B173.8-1991 铆接、定标和白铁工铆钉锤.安全要求 Riveting, Scaling, and Tinners' Setting Hammers - Safety Requirements
ANSI/HTI B209.2-1991 手工工具.金属冲头和尖冲钉.安全要求 Hand Tools - Metal Punches and Drift Pins - Safety Requirements
ANSI/ISA 61010-1(82.02.01) 2004, Annex DV US-2005 测量、控制和实验室用电气设备的安全要求.第1部分:一般要求 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 1: General Requirements
ANSI/ISA S82.02.02-1996 测量、控制和实验室用电气设备的安全要求 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use
ANSI/ISA S82.02.04-1996 测量、控制和实验室用电气设备的安全要求.第2-032部分:电测量和试验用手持电流线夹的特殊要求 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-032: Particular Requirements for Hand-Held Current Clamps for Electrical Measurement and Test
ANSI/NFPA 70E-2004 员工工作场所的电气安全要求 Electrical Safety Requirements for Employee Workplaces
ANSI/SPI B151.1-1997 塑料机械.卧式注射成型机.制造、维护和使用的安全要求 Plastics Machinery - Horizontal Injection Molding Machines - Safety Requirements for Manufacture, Care, and Use
ANSI/SPI B151.27-2003 塑料机械.与卧式注射成型机一起使用的机器人.集成、维护和使用的安全要求 Plastics Machinery - Robots Used with Horizontal Injection Molding Machines - Safety Requirements for the Integration, Care, and Use
ANSI/SPI B151.29-2002 垂直夹紧注模机的制造、保养和使用安全要求 Safety Requirements for the Manufacture, Care and Use of Vertical Clamp Injection Molding Machines
ANSI/TIA-102AACA-1-2002 项目25.数字无线电发射密钥更换(OTAR)协议.修改件1.第3类分组加密算法的密钥管理安全要求 Project 25 - Digital Radio Over the Air Rekeying (OTAR) Protocol - Addendum 1 - Key Management Security Requirements for Type 3 Block Encryption Algorithms
ANSI/TIA/EIA 102AACA-1-2002 项目25.数字无线电远程再加密(OTAR)协议.附录1.类型3块加密算法的密钥管理安全要求 Project 25 - Digital Radio Over the Air Rekeying (OTAR) Protocol - Addendum 1 - Key Management Security Requirements for Type 3 Block Encryption Algorithms
ANSI/UL 1709-2005 结构钢防护材料的快速升温燃烧试验的安全要求 Standard for Safety for Rapid Rise Fire Tests of Protection Materials for Structural Steel
ANSI/UL 60065-2006 音频、视频与类似电子仪器.安全要求 Audio, Video and Similar Electronic Apparatus - Safety Requirements
ASME A120.1-2001 建筑物维修用电动升降平台的安全要求 (Safety requirements for powered platforms for building maintenance)
ASME A39.1 Interpretations-199 窗户清洗的安全要求.说明 (Interpretations: Safety requirements for window cleaning)
ASME A39.1-1995 窗户清洗的安全要求 (Safety requirements for window cleaning)
ASME A39.1b Addenda-1997 窗户清洗的安全要求.附录 (Safety requirements for window cleaning; Addenda)
ASME B107.51-2001 星形钻头.安全要求 (Star drills - Safety requirements)
ASME B107.55-2002 斧子.安全要求 (Axes - Safety Requirements)
ASTM ANS/ISO 10079-1-1999 医疗吸引设备.第1部分:电动吸引设备.与美国国家标准有偏差的ASTM国际标准认可的安全要求 Medical Suction Equipment - Part 1: Electrically Powered Suction Equipment - Safety Requirements Approved as an American National Standard with Deviations by ASTM International
ASTM ANS/ISO 7767-1997 与美国国家标准有偏差的ASTM国际标准认可的监视病人呼吸混合物的氧气监视器的安全要求 Oxygen Monitors for Monitoring Patient Breathing Mixtures-Safety Requirements Approved as an American National Standard with Deviations by ASTM International
ASTM E 2349-2005 金属铸造操作中安全要求的标准实施规程:型砂制备、制模和制型心;熔化和灌注;清洁和精整 Standard Practice for Safety Requirements in Metal Casting Operations: Sand Preparation, Molding, and Core Making; Melting and Pouring; and Cleaning and Finishing
ASTM F 1208-1989 麻醉呼吸系统的最低性能和安全要求用标准规范 Standard Specification for Minimum Performance and Safety Requirements for Anesthesia Breathing Systems
ASTM F 920-1993 人用复苏器的最低性能和安全要求 Standard Specification for Minimum Performance and Safety Requirements for Resuscitators Intended for Use With Humans
ASTM/ISO 10079-1-1999 医疗抽吸设备.第1部分:电动抽吸设备.安全要求 Medical Suction Equipment - Part 1: Electrically Powered Suction Equipment - Safety Requirements
ASTM/ISO 7767-1997 监控病人呼吸混合物的氧分析仪的安全要求 Oxygen Monitors for Monitoring Patient Breathing Mixtures-Safety Requirements
UL 60065-2003 音频、视频及类似电子设备.安全要求 (Audio, video and similar electronic apparatus - Safety requirements)
编号中文名称英文名称

返回