| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| IEC 60104-1987 | 架空导线用铝镁硅合金导线 | Aluminium-magnesium-silicon alloy wire for overhead line conductors. |
| IEC 60114 Corrigendum 1-1959 | 热处理型铝镁硅系铝合金母线材料的建议 | Recommendation for heat-treated aluminium alloy busbar material of the aluminium-magnesium-silicon type |
| IEC 60114-1959 | 热处理型铝镁硅系铝合金母线材料的建议 | Recommendation for heat-treated aluminium alloy busbar material of the aluminium-magnesium-silicon type |
| IEC 60329-1985 | 用于电子和电信设备的晶粒取向硅铁合金带绕切割磁芯 | Strip-wound cut cores of grain oriented silicon-iron alloy, used for electronic and telecommunication equipment |
| IEC 60404-8-3-2005 | 磁性材料.第8-3部分:单项材料规范.以半加工状态交货的冷轧电工非合金和合金钢片及钢带 | Magnetic materials - Part 8-3: Specifications for individual materials - Cold-rolled electrical non-alloyed and alloyed steel sheet and strip delivered in the semi-processed state |
| IEC 60614-2-7-1995 | 电气装置用导管规范 第2部分:导管的特殊规范 第7节:无螺纹铝合金刚性导管 | Conduits for electrical installations - Specification - Part 2: Particular specifications for conduits - Section 7: Rigid non-threadable conduits of aluminium alloy |
| IEC 61035-2-4-1995 | 电气装置用导管配件规范 第2部分:特殊要求 第4节:铝合金导管配件 | Specification for conduit fittings for electrical installations - Part 2: Particular specifications - Section 4: Conduit fittings of aluminium alloy |
| IEC 61190-1-3-2007 | 电子组件用连接材料.第1-3部分:电子焊接用电子级钎焊合金及有焊剂和无焊剂的固体焊料用要求 | Attachment materials for electronic assembly - Part 1-3: Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications |
| IEC 61755-3-5-2006 | 纤维光学连接器的光接口.第3-5部分:光接口.以铜镍合金作为纤维环绕材料、单模纤维的直径2.5mm和1.25mm圆柱 | Fibre optic connector optical interfaces - Part 3-5: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre |
| IEC 61755-3-6-2006 | 纤维光学连接器光接口.第3-6部分:光接口.以铜镍合金作为纤维环绕材料、单模纤维的直径2.5mm和1.25mm圆柱形8 | Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre |
| IEC 61788-3-2006 | 超导性.第3部分:临界电流测量.银和/或银合金铠装的铋-2212和铋-2223氧化物超导体的临界直流电流 | Superconductivity - Part 3: Critical current measurement - DC critical current of Ag- and/or Ag alloy-sheathed Bi-2212 and Bi-2223 oxide superconductors |
| IEC 62004-2007 | 架空导线用耐热铝合金导线 | Thermal resistant aluminium alloy wire for overhead line conductor |
| IEC/PAS 62483-2006 | 测量锡和锡合金表面须晶生长的试验方法 | Test method for measuring whisker growth on tin and tin alloy surface finishes |
| IEC/TR2 61394-1997 | 架空线路 铝、铝合金及钢心导线用脂的特性 | Overhead lines - Characteristics of greases for aluminium, aluminium alloy and steel bare conductors |
| ISO 10042 Technical Corrigendum 1-2006 | 焊接.铝和铝合金的弧焊接头.缺陷质量分级.技术勘误1 | Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections; Technical Corrigendum 1 |
| ISO 10042-2005 | 焊接.铝和铝合金的弧焊接头.缺陷质量分级 | Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections |
| ISO 10049-1992 | 铝合金铸件 目视法评定针孔 | Aluminium alloy castings; visual method for assessing the porosity |
| ISO 10074-1994 | 铝和铝合金硬质阳极氧化膜规范 | Specification for hard anodic oxidation coatings on aluminium and its alloys |
| ISO 10145-1-1993 | 焊有硬质合金螺旋刀头的端铣刀 第1部分:直柄端铣刀尺寸 | End mills with brazed helical hardmetal tips; part 1: dimensions of end mills with parallel shank |
| ISO 10145-2-1993 | 焊有硬质合金螺旋刀头的端铣刀 第2部分:7/24锥柄端铣刀尺寸 | End mills with brazed helical hardmetal tips; part 2: dimensions of end mills with 7/24 taper shank |
| ISO 10215-1992 | 阳极氧化铝和铝合金 阳极氧化膜图像清晰度的目视测定 图表比例尺法 | Anodized aluminium and aluminium alloys; visual determination of image clarity of anodic oxidation coatings; chart scale method |
| ISO 10216-1992 | 阳极氧化铝和铝合金 阳极氧化膜图像清晰度仪器测定 仪器法 | Anodized aluminium and aluminium alloys; instrumental determination of image clarity of anodic oxidation coatings; instrumental method |
| ISO 10270 Technical Corrigendum 1-1997 | 金属与合金的腐蚀 核动力反应堆用锆合金的水腐蚀试验 技术勘误1 | Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors; Technical corrigendum 1 |
| ISO 10270-1995 | 金属与合金的腐蚀 核动力反应堆用锆合金的水腐蚀试验 | Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors |
| ISO 10386-1994 | 硼铁合金 规范和交货条件 | Ferroboron - Specification and conditions of delivery |
| ISO 10461 AMD 1-2006 | 储气瓶.无缝铝合金储气瓶.定期检验和试验 | Gas cylinders - Seamless aluminium-alloy gas cylinders - Periodic inspection and testing |
| ISO 10461-2005 | 储气瓶.无缝铝合金储气瓶.定期检验和试验 | Gas cylinders - Seamless aluminium-alloy gas cylinders - Periodic inspection and testing |
| ISO 10546-1993 | 化学转化膜 铝及铝合金上瓢洗和未瓢洗的铬酸盐转化膜 | Chemical conversion coatings; rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys |
| ISO 10713-1992 | 首饰 金合金覆盖层 | Jewellery; gold alloy coatings |
| ISO 10911-1994 | 硬质合金直柄端铣刀 尺寸 | Solid hardmetal end mills with parallel shank - Dimensions |
| ISO 10993-15-2000 | 医疗器械的生物学评价 第15部分:金属与合金降解产物的识别与定性 | Biological evaluation of medical devices - Part 15: Identification and quantification of degradation products from metals and alloys |
| ISO 11130-1999 | 金属与合金的腐蚀 盐溶液中的交替浸入试验 | Corrosion of metals and alloys - Alternate immersion test in salt solution |
| ISO 11143-1999 | 牙科设备 汞齐合金分离器 | Dental equipment - Amalgam separators |
| ISO 1118-1978 | 铝和铝合金 钛含量的测定 铬变酸分光光度法 | Aluminium and aluminium alloys; Determination of titanium; Spectrophotometric chromotropic acid method |
| ISO 11210-1995 | 铂合金首饰中含铂量的测定 氯铂酸铵沉淀后重量法 | Determination of platinum in platinum jewellery alloys - Gravimetric method after precipitation of diammonium hexachloroplatinate |
| ISO 11303-2002 | 金属和合金的腐蚀.防大气腐蚀方法的选择指南 | Corrosion of metals and alloys - Guidelines for selection of protection methods against atmospheric corrosion |
| ISO 11306-1998 | 金属与合金的腐蚀 对海水表面的金属和合金的暴露和评估准则 | Corrosion of metals and alloys - Guidelines for exposing and evaluating metals and alloys in surface sea water |
| ISO 11400-1992 | 镍、镍铁和镍合金 磷含量的测定 二氧磷钒钼分子吸收光谱法 | Nickel, ferronickel and nickel alloys; determination of phosphorus content; phosphovanadomolybdate molecular absorption spectrometric method |
| ISO 11426-1997 | 金合金首饰中含金量的测定 灰吹法(火试金法) | Determination of gold in gold jewellery alloys - Cupellation method (fire assay) |
| ISO 11427 Technical Corrigendum 1-1994 | 银合金首饰中含银量的测定 溴化钾容量法(电位滴定) 技术勘误1 | Determination of silver in silver jewellery alloys - Volumetric (potentiometric) method using potassium bromide; Technical Corrigendum 1 |
| ISO 11427-1993 | 银合金首饰中含银量的测定 溴化钾容量法(电位滴定) | Determination of silver in silver jewellery alloys; volumetric (potentiometric) method using potassium bromide |
| ISO 11433-1993 | 镍合金 钛含量的测定 二安替吡啉甲烷分子吸收光谱法 | Nickel alloys; determination of titanium content; diantipyrylmethane molecular absorption spectrometric method |
| ISO 11435-2005 | 镍合金.钼的测定.感应耦合等离子体原子发射光谱法 | Nickel alloys - Determination of molybdenum - Inductively coupled plasma atomic emission spectrometric method |
| ISO 11436-1993 | 镍和镍合金 硼总含量的测定 姜黄分子吸收光谱法 | Nickel and nickel alloys; determination of total boron content; curcumin molecular absorption spectrometric method |
| ISO 11437-1-1994 | 镍合金 用电热原子吸收光谱法对痕量元素含量测定 第1部分:一般要求和试样的溶解 | Nickel alloys - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Part 1: General requirements and sample dissolution |
| ISO 11437-2-1994 | 镍合金 用电热原子吸收光谱法对痕量元素含量测定 第2部分:铅含量的测定 | Nickel alloys - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Part 2: Determination of lead content |
| ISO 11463-1995 | 金属与合金的腐蚀 斑蚀的评估 | Corrosion of metals and alloys - Evaluation of pitting corrosion |
| ISO 11474-1998 | 金属和合金的腐蚀.人造气氛的腐蚀试验.间歇盐雾下的室外加速试验(疮痂试验) | Corrosion of metals and alloys - Corrosion test in artificial atmosphere - Accelerated outdoor test by intermittent spraying of a salt solution (Scab test) |
| ISO 11489-1995 | 铂合金首饰中含铂量的测定 氯化汞还原重量法 | Determination of platinum in platinum jewellery alloys - Gravimetric determination by reduction with mercury(I) chloride |
| ISO 11490-1995 | 钯合金首饰中含钯量的测定 丁二酮肟重量法 | Determination of palladium in palladium jewellery alloys - Gravimetric determination with dimethylglyoxime |
| ISO 115-2003 | 重熔用非铝合金锭.分类及成分 | Unalloyed aluminium ingots for remelting - Classification and composition |
| ISO 1169-2006 | 锌合金.铝含量的测定.滴定法 | Zinc alloys - Determination of aluminium content - Titrimetric method |
| ISO 1178-1976 | 镁合金 可溶性锆的测定 茜素磺酸盐光度法 | Magnesium alloys; Determination of soluble zirconium; Alizarin sulphonate photometric method |
| ISO 11782-1-1998 | 金属和合金的腐蚀.腐蚀疲劳试验.第1部分:循环失效试验 | Corrosion of metals and alloys - Corrosion fatigue testing - Part 1: Cycles to failure testing |
| ISO 11782-2-1998 | 金属和合金的腐蚀.腐蚀疲劳试验.第2部分:预裂纹试样裂纹扩展试验 | Corrosion of metals and alloys - Corrosion fatigue testing - Part 2: Crack propagation testing using precracked specimens |
| ISO 11844-1-2006 | 金属与合金的腐蚀.室内空气低腐蚀性分类.第1部分:室内腐蚀作用的测定和评估 | Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 1: Determination and estimation of indoor corrosivity |
| ISO 11844-2-2005 | 金属与合金的腐蚀.室内空气低腐蚀性分类.第2部分:室内空气中腐蚀作用的测定 | Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 2: Determination of corrosion attack in indoor atmospheres |
| ISO 11844-3-2006 | 金属与合金的腐蚀.室内空气低腐蚀性分类.第3部分:室内腐蚀作用下环境参数的测定 | Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity |
| ISO 11845-1995 | 金属与合金的腐蚀 腐蚀试验的一般原则 | Corrosion of metals and alloys - General principles for corrosion testing |
| ISO 11846-1995 | 金属与合金的腐蚀 溶解热处理铝合金的耐晶间腐蚀性的测定 | Corrosion of metals and alloys - Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys |
| ISO 11873-2005 | 硬质合金.钴金属粉末中硫和碳含量的测定.红外线探测法 | Hardmetals - Determination of sulfur and carbon contents in cobalt metal powders - Infrared detection method |
| ISO 11881 Technical Corrigendum 1-1999 | 金属与合金的腐蚀 铝合金的剥落腐蚀试验 技术勘误1 | Corrosion of metals and alloys - Exfoliation corrosion testing of aluminium alloys; Technical Corrigendum 1 |
| ISO 11881-1999 | 金属与合金的腐蚀 铝合金的剥落腐蚀试验 | Corrosion of metals and alloys - Exfoliation corrosion testing of aluminium alloys |
| ISO 1190-1-1982 | 铜和铜合金 牌号表示方法 第1部分:材料牌号 | Copper and copper alloys; Code of designation; Part 1 : Designation of materials |
| ISO 11973-1999 | 一般用途耐热铸钢及合金 | Heat-resistance cast steels and alloys for general applications |
| ISO 12215-3-2002 | 小型船舶.船体结构和船材尺寸.第3部分:材料:钢,铝合金,木料及其它材料 | Small craft - Hull construction and scantlings - Part 3: Materials: Steel, aluminium alloys, wood, other materials |
| ISO 12288-2000 | 航空航天 镍合金实心铆钉 采购规范 | Aerospace - Rivets, solid, in nickel alloy - Procurement specification |
| ISO 12290-2000 | 航空航天 钛和钛合金实心铆钉 采购规范 | Aerospace - Rivets, solid, in titanium or titanium alloy - Procurement specification |
| ISO 12725-1997 | 镍和镍合金铸件 | Nickel and nickel alloy castings |
| ISO 12732-2006 | 金属和合金的腐蚀.利用双环法进行电化学电动势活化测量 | Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method) |
| ISO 13583-1-2000 | 离心铸造钢及合金产品 第1部分:一般试验和公差 | Centrifugally cast steel and alloy products - Part 1: General testing and tolerances |
| ISO 13583-2-2003 | 离心铸造钢及合金产品.第2部分:耐热材料 | Centrifugally cast steel and alloy products - Part 2: Heat resistant materials |
| ISO 13680 Technical Corrigendum 2-2004 | 石油和天然气工业.用作套管、油管和接箍的防腐合金无缝钢管.交货技术条件.技术勘误2 | Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions; Technical Corrigendum 2 |
| ISO 13680-2000 | 石油和天然气工业 用作套管、油管和接箍的防腐合金无缝钢管交货技术条件 | Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions |
| ISO 13756-1997 | 银合金中含银量的测定 氯化钠或氯化钾容量法(电位滴定) | Determination of silver in silver jewellery alloys - Volumetric (potentiometric) method using sodium chloride or potassium chloride |
| ISO 13770-1997 | 铝合金气瓶 避免瓶颈和瓶肩裂纹的操作要求 | Aluminium alloy gas cylinders - Operational requirements for avoidance of neck and shoulder cracks |
| ISO 13897 Technical Corrigendum 1-2003 | 牙科学.汞齐合金胶囊.技术勘误1 | Dentistry - Amalgam capsules; Technical Corrigendum 1 |
| ISO 13897-2003 | 牙科学.汞齐合金胶囊 | Dentistry - Amalgam capsules |
| ISO 13899-2-2005 | 钢.合金钢中钼、铌和钨含量的测定.感应耦合等离子体原子发射光谱法.第2部分:铌含量测定 | Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductively coupled plasma atomic emission spectrometric method - Part 2: Determination of Nb content |
| ISO 13919-2-2001 | 焊接 电子束和激光束焊接接头 缺陷质量等级指南 第2部分：铝及其可焊合金 | Welding - Electron and laser beam welded joints; Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys |
| ISO 14171-2002 | 焊料.非合金钢和细粒钢埋弧焊用焊丝和焊丝-焊剂混合物.分类 | Welding consumables - Wire electrodes and wire-flux combinations for submerged arc welding of non alloy and fine grain steels - Classification |
| ISO 14172 Technical Corrigendum 1-2004 | 焊接消耗品.镍和镍合金的手工金属弧焊接用涂覆电极.分类.技术勘误1 | Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification; Technical Corrigendum 1 |
| ISO 14172 Technical Corrigendum 2-2005 | 焊接消耗品.镍及镍合金的手工金属电弧焊接用涂敷焊条.分类.技术勘误2 | Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification, Technical Corrigendum 2 |
| ISO 14172-2003 | 焊接消耗品.镍及镍合金的手工电弧焊接用涂敷焊条.分类 | Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification |
| ISO 14317-2006 | 硬质合金除外的烧结金属材料.屈服压力强度的测定 | Sintered metal materials excluding hardmetals - Determination of compressive yield strength |
| ISO 14341-2002 | 焊料.非合金钢和细粒钢金属气体保护焊用焊丝和溶敷金属.分类 | Welding consumables - Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification |
| ISO 14737-2003 | 一般用途的非合金和低合金铸钢 | Cast non-alloy and low alloy steels for general applications |
| ISO 14788-2005 | 连续热浸镀锌(5%)铝合金涂层钢薄板 | Continuous hot-dip zinc-5% aluminium alloy coated steel sheet |
| ISO 14920-1999 | 热喷涂 自熔合金的喷涂及重熔 | Thermal spraying - Spraying and fusing of self-fluxing alloys |
| ISO 14993-2001 | 金属及合金的腐蚀 循环暴露在盐雾、干、湿条件下的加速试验 | Corrosion of metals and alloys - Accelerated testing involving cyclic exposure to salt mist, "dry" and "wet" conditions |
| ISO 15156-2 Technical Corrigendum 1-2005 | 石油和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.第2部分:耐裂化碳钢和低合金钢及铸铁的使用. | Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons; Technical Corrigendum 1 |
| ISO 15156-2-2003 | 石油和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.第2部分:耐裂化碳和低合金钢及铸铁的使用 | Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons |
| ISO 15156-3 Technical Corrigendum 1-2005 | 石油和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.第1部分:耐裂化CRAs(防腐蚀合金)和其他合金. | Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys; Technical Corrigendum 1 |
| ISO 15156-3 Technical Corrigendum 2-2005 | 石油和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.第1部分:耐裂化CRAs(防腐蚀合金)和其他合金. | Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys; Technical Corrigendum 2 |
| ISO 15156-3-2003 | 石油和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.第3部分:耐裂化CRAs(耐腐蚀合金)和其他合金 | Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys |
| ISO 15201-2006 | 锌和锌合金.铸造.规范 | Zinc and zinc alloys - Castings - Specifications |
| ISO 15324-2000 | 金属和合金的腐蚀.滴落蒸发试验的应力腐蚀开裂评价 | Corrosion of metals and alloys - Evaluation of stress corrosion cracking by the drop evaporation test |
| ISO 15329-2006 | 金属和合金的腐蚀.热处理铝合金的粒间腐蚀易感性评价的阳极试验 | Corrosion of metals and alloys - Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys |
| ISO 15349-2-1999 | 非合金钢.低碳含量的测定.第2部分:感应炉(经预加热)内燃烧后红外吸收法 | Unalloyed steel - Determination of low carbon content - Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) |
| ISO 1554-1976 | 加工铜合金和铸造铜合金 铜含量的测定 电解法 | Wrought and cast copper alloys; Determination of copper content; Electrolytic method |
| ISO 15546-2007 | 石油和天然气工业.铝合金钻杆 | Petroleum and natural gas industries - Aluminium alloy drill pipe |
| ISO 15614-1 Technical Corrigendum 1-2005 | 金属材料焊接过程的规范和鉴定.焊接过程试验.第1部分:钢的电弧焊接和气焊以及镍和镍合金的电弧焊接.技术勘 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys; Technical Corrigendum 1 |
| ISO 15614-1-2004 | 金属材料焊接程序的规范和鉴定.焊接程序试验.第1部分:钢的电弧焊和气焊及镍和镍合金的电弧焊 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| ISO 15614-2 Technical Corrigendum 1-2005 | 金属材料焊接过程的规范和鉴定.焊接过程试验.第2部分:铝及其合金的电弧焊接.技术勘误1 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys; Technical Corrigendum 1 |
| ISO 15614-2-2005 | 金属材料焊接程序的规范和鉴定.焊接过程试验.第2部分:铝和铝合金电弧焊 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys |
| ISO 15614-5-2004 | 金属材料焊接程序的规范和鉴定.焊接程序试验.第5部分:钛、锆及其合金的电弧焊 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys |
| ISO 15614-6-2006 | 金属材料焊接程序的规范和鉴定.焊接程序试验.第6部分:铜及其合金的电弧焊接和气焊 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys |
| ISO 15792-1-2000 | 焊接耗材 试验方法 第1部分:钢、镍和镍合金全焊金属试样的试验方法 | Welding consumables - Test methods - Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys |
| ISO 16120-1-2001 | 拔丝用非合金钢丝棒 第1部分：一般要求 | Non-alloy steel wire rod for conversion to wire - Part 1: General requirements |
| ISO 16120-2-2001 | 拔丝用非合金钢丝棒 第2部分：一般用途钢丝棒的特定要求 | Non-alloy steel wire rod for conversion to wire - Part 2: Specific requirements for general purpose wire rod |
| ISO 16120-3-2001 | 拔丝用非合金钢丝棒 第3部分：未脱氧的和未脱氧代用的低碳钢丝棒的特定要求 | Non-alloy steel wire rod for conversion to wire - Part 3: Specific requirements for rimmed and rimmed-substitute, low-carbon steel wire rod |
| ISO 16120-4-2001 | 拔丝用非合金钢丝棒 第4部分：特殊用途钢丝棒的特定要求 | Non-alloy steel wire rod for conversion to wire - Part 4: Specific requirements for wire rod for special applications |
| ISO 16151-2005 | 金属和合金的腐蚀.暴露于盐酸喷雾、干燥和湿润条件下加速周期试验 | Corrosion of metals and alloys - Accelerated cyclic tests with exposure to acidified salt spray, "dry" and "wet" conditions |
| ISO 16220 AMD 1-2007 | 镁和镁合金.镁合金铸锭和铸件.修改件1:附加合金 | Magnesium and magnesium alloys - Magnesium alloy ingots and castings; Amendment 1: Additional alloys |
| ISO 16220-2005 | 镁和镁合金.镁合金铸锭和铸件 | Magnesium and magnesium alloys - Magnesium alloy ingots and castings |
| ISO 16468-2005 | 熔模铸件(钢、镍合金和钴合金).一般技术要求 | Investment castings (steel, nickel alloys and cobalt alloys) - General technical requirements |
| ISO 16701-2003 | 金属及合金的腐蚀.调节空气中的腐蚀.暴露于间歇喷洒盐溶液和潮湿循环受控环境下的加速腐蚀试验 | Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution |
| ISO 16784-1-2006 | 金属与合金的腐蚀.工业冷却水系统中的腐蚀和结污.第1部分:进行开放式循环冷却水系统用腐蚀和结污控制添加剂 | Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems - Part 1: Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems |
| ISO 16784-2-2006 | 金属与合金的腐蚀.工业冷却水系统中的腐蚀性和结污.第2部分:用实验刻度试验设备对冷却水处理程序的性能的评 | Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems - Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig |
| ISO 17475 Technical Corrigendum 1-2006 | 金属和合金的腐蚀.电化学试验方法.静电位和动电位偏振测量导则.技术勘误1 | Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements; Technical Corrigendum 1 |
| ISO 17475-2005 | 金属和合金的腐蚀.电化学试验方法.静电位和动电位偏振测量导则 | Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements |
| ISO 17615-2007 | 铝和铝合金.重熔用合金铸锭.规范 | Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications |
| ISO 17632-2004 | 焊接消耗品.非合金钢及细粒钢气体保护的和非气体保护金属弧焊用药芯电极.分类 | Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification |
| ISO 1783-1973 | 镁合金 锌的测定 容量法 | Magnesium alloys; Determination of zinc; Volumetric method |
| ISO 1784-1976 | 铝合金 锌含量的测定 EDTA滴定法 | Aluminium alloys; Determination of zinc; EDTA titrimetric method |
| ISO 17864-2005 | 金属和合金的腐蚀性.静电位控制下的临界点蚀温度测定 | Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control |
| ISO 1810-1976 | 铜合金 镍含量(低含量)的测定 丁二酮肟分光光度法 | Copper alloys; Determination of nickel (low contents); Dimethylglyoxime spectrophotometric method |
| ISO 1811-1-1988 | 铜和铜合金 化学分析试样的选择和制备 第1部分:铸造产品的取样 | Copper and copper alloys; selection and preparation of samples for chemical analysis; part 1: sampling of cast unwrought products |
| ISO 1811-2-1988 | 铜和铜合金 化学分析试样的选择和制备 第2部分:加工产品及铸件的取样 | Copper and copper alloys; selection and preparation of samples for chemical analysis; part 2: sampling of wrought products and castings |
| ISO 1812-1976 | 铜合金 铁含量的测定 1,10-菲罗啉分光光度法 | Copper alloys; Determination of iron content; 1,10- Phenanthroline spectrophotometric method |
| ISO 18273-2004 | 焊接消耗品.铝和铝合金焊接用焊丝电极、金属丝和棒材.分类 | Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification |
| ISO 18274 Technical Corrigendum 1-2005 | 焊接消耗品.镍和镍合金熔焊用焊丝和条式电极、焊线和焊条.分类.技术勘误1 | Welding consumables - Wire and strip electrodes, wires and rods for fusion welding of nickel and nickel alloys - Classification; Technical Corrigendum 1 |
| ISO 18274 Technical Corrigendum 2-2006 | 焊接耗材.镍及镍合金熔焊用丝状和带状电极、焊丝和焊条.分类.技术勘误2 | Welding consumables - Wire and strip electrodes, wires and rods for fusion welding of nickel and nickel alloys - Classification; Technical Corrigendum 2 |
| ISO 18274-2004 | 焊接消耗品.镍和镍合金电弧焊用焊丝和条式电极、金属线和棒材.分类 | Welding consumables - Wire and strip electrodes, wires and rods for arc welding of nickel and nickel alloys - Classification |
| ISO 18595-2007 | 电阻焊接.铝和铝合金的点焊.可焊接性、焊接和测试 | Resistance welding - Spot welding of aluminium and aluminium alloys - Weldability, welding and testing |
| ISO 196-1978 | 锻铜和铜合金 残余应力的检测 硝酸亚汞试验 | Wrought copper and copper alloys; Detection of residual stress; Mercury(I) nitrate test |
| ISO 197-1-1983 | 铜和铜合金 术语和定义 第1部分:材料 | Copper and copper alloys; Terms and definitions; Part 1 : Materials |
| ISO 197-2-1983 | 铜和铜合金 术语和定义 第2部分:未加工产品(精炼型材) | Copper and copper alloys; Terms and definitions; Part 2 : Unwrought products (Refinery shapes) |
| ISO 197-3-1983 | 铜和铜合金 术语和定义 第3部分:加工产品 | Copper and copper alloys; Terms and definitions; Part 3 : Wrought products |
| ISO 197-4-1983 | 铜和铜合金 术语和定义 第4部分:铸件 | Copper and copper alloys; Terms and definitions; Part 4 : Castings |
| ISO 197-5-1980 | 铜和铜合金 术语和定义 第5部分:加工和处理方法 | Copper and copper alloys; Terms and definitions; Part 5 : Methods of processing and treatment |
| ISO 1975-1973 | 镁和镁合金 硅的测定 钼蓝光度法 | Magnesium and magnesium alloys; Determination of silicon; Spectrophotometric method with the reduced silicomolybdic complex |
| ISO 1976-1975 | 锌合金 铜含量的测定 电解法 | Zinc alloys; Determination of copper content; Electrolytic method |
| ISO 19959-2005 | 熔模铸件表面状况的外观检查.钢、镍合金和钴合金 | Visual examination of the surface condition of investment castings - Steel, nickel alloys and cobalt alloys |
| ISO 19960-2005 | 特殊物理性能的铸钢及合金 | Cast steels and alloys with special physical properties |
| ISO 20081-2005 | 锌和锌合金.抽样方法.规范 | Zinc and zinc alloys - Method of sampling - Specifications |
| ISO 20160-2006 | 外科植入物.金属材料.α+ β钛合金棒材的微观结构的分类 | Implants for surgery - Metallic materials - Classification of microstructures for alpha+beta titanium alloy bars |
| ISO 2063-2005 | 热喷镀.金属涂层和其他无机覆层.锌、铝及其合金 | Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys |
| ISO 20703-2006 | 气瓶.可再充装的焊接铝合金气瓶.设计、结构和试验 | Gas cylinders - Refillable welded aluminium-alloy cylinders - Design, construction and testing |
| ISO 2085-1976 | 铝和铝合金的阳极氧化 阳极氧化膜的连续性检验 硫酸铜试验 | Anodizing of aluminium and its alloys; Check of continuity of thin anodic oxide coatings; Copper sulphate test |
| ISO 209-2007 | 铝和铝合金.化学成分 | Aluminium and aluminium alloys - Chemical composition |
| ISO 2092-1981 | 轻金属及其合金 元素符号表示牌号的规则 | Light metals and their alloys; Code of designation based on chemical symbols |
| ISO 2106 AMD 1-1983 | 铝和铝合金的阳极氧化 阳极氧化膜单位面积质量(表面密度)的测定 重量法 修改1 | Anodizing of aluminium and its alloys; determination of surface density of anodic oxide coatings; gravimetric method; amendment 1 |
| ISO 2106-1982 | 铝和铝合金的阳极氧化 阳极氧化膜单位面积质量(表面密度)的测定 重量法 | Anodizing of aluminium and its alloys; Determination of mass per unit area (surface density) of anodic oxide coatings; Gravimetric method |
| ISO 2107-2007 | 铝和铝合金.锻造制品.回火号 | Aluminium and aluminium alloys - Wrought products - Temper designations |
| ISO 2128-1976 | 铝和铝合金的阳极氧化 阳极氧化膜厚度的测定 分光束显微镜无损测定法 | Anodizing of aluminium and its alloys; Determination of thickness of anodic oxide coatings; Non-destructive measurement by split-beam microscope |
| ISO 2135-1984 | 铝和铝合金的阳极氧化 用人工灯测定着色阳极氧化膜耐光性的加速耐候试验 | Anodizing of aluminium and its alloys; Accelerated test of light fastness of coloured anodic oxide coatings using artificial light |
| ISO 2142-1981 | 加工铝、镁及其合金 力学性能试验用样品和试样的选择 | Wrought aluminium, magnesium and their alloys; selection of specimens and test pieces for mechanical testing |
| ISO 2143-1981 | 铝和铝合金的阳极氧化 封孔后的阳极氧化膜吸收能力损失的评估 酸处理后的染斑试验 | Anodizing of aluminium and its alloys; Estimation of loss of absorptive power of anodic oxide coatings after sealing; Dye spot test with prior acid treatment |
| ISO 2179-1986 | 锡镍合金电镀层 规范和试验方法 | Electroplated coatings of tin-nickel alloy; Specification and test methods |
| ISO 22033-2005 | 镍合金.铌的测定.感应耦合等离子体原子发射光谱法 | Nickel alloys - Determination of niobium - Inductively coupled plasma atomic emission spectrometric method |
| ISO 2232-1990 | 一般用途非合金钢丝绳和粗直径钢丝绳用拉拨钢丝 规范 | Round drawn wire for general purpose non-alloy steel wire ropes and for large diameter steel wire ropes; specifications |
| ISO 22825-2006 | 焊缝无损检测.超声波试验.奥氏体刚和镍合金焊缝试验 | Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys |
| ISO 2297-1973 | 铝和铝合金的化学分析 镁的络合滴定法测定 | Chemical analysis of aluminium and its alloys; Complexometric determination of magnesium |
| ISO 23079-2005 | 镁和镁合金.回炉料.要求、分类和验收 | Magnesium and magnesium alloys - Returns - Requirements, classification and acceptance |
| ISO 2353-1972 | 镁和镁合金 含锆、稀土、钍和银的镁合金中锰的测定 高碘酸盐光度法 | Magnesium and its alloys; Determination of manganese in magnesium alloys containing zirconium, rare earths, thorium and silver; Periodate photometric method |
| ISO 2354-1976 | 镁合金 不溶性锆的测定 茜素磺酸盐光度法 | Magnesium alloys; Determination of insoluble zirconium; Alizarin sulphonate photometric method |
| ISO 2355-1972 | 镁和镁合金的化学分析 稀土含量的测定 重量法 | Chemical analysis of magnesium and its alloys; Determination of rare earths; Gravimetric method |
| ISO 2376-1972 | 铝和铝合金的阳极氧化 绝缘性能的击穿电势检查法 | Anodization (anodic oxidation) of aluminium and its alloys; Insulation check by measurement of breakdown potential |
| ISO 2377-1972 | 镁合金砂模铸件 参比试棒 | Magnesium alloy sand castings; Reference test bar |
| ISO 2378-1972 | 铝合金冷硬铸件 参比试棒 | Aluminium alloy chill castings; Reference test bar |
| ISO 2379-1972 | 铝合金砂模铸件 参比试棒 | Aluminium alloy sand castings; Reference test bar |
| ISO 24034-2005 | 焊接耗材.钛和钛合金的熔焊用焊丝和焊条.分类 | Welding consumables - Solid wires and rods for fusion welding of titanium and titanium alloys - Classification |
| ISO 242-1975 | 硬质合金焊接车刀片 | Carbide tips for brazing on turning tools |
| ISO 24234-2004 | 牙科学.牙科汞齐合金用汞及合金 | Dentistry - Mercury and alloys for dental amalgam |
| ISO 243-1975 | 硬质合金车刀 外圆车刀 | Turning tools with carbide tips; External tools |
| ISO 2543-1973 | 铜和铜合金 锰含量的测定 分光光度法 | Copper and copper alloys; Determination of manganese; Spectrophotometric method |
| ISO 2560-2002 | 焊料.非合金钢和细粒钢的手工金属电弧焊接的涂敷焊条.分类 | Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification |
| ISO 2566-1-1984 | 钢 伸长值的换算 第1部分:碳素钢和低合金钢 | Steel; Conversion of elongation values; Part 1 : Carbon and low alloy steels |
| ISO 26202-2007 | 镁和镁合金.铸件阳极用镁合金 | Magnesium and magnesium alloys - Magnesium alloys for cast anodes |
| ISO 2624-1990 | 铜和铜合金 平均晶粒度的测定方法 | Copper and copper alloys; estimation of average grain size |
| ISO 2701-1977 | 一般用途非合金钢丝绳用拉拨钢丝 验收条件 | Drawn wire for general purpose non-alloy steel wire ropes; Terms of acceptance |
| ISO 2804-1996 | 线、棒或管材拉模 硬质合金烧结片 尺寸 | Wire, bar or tube drawing dies - As-sintered pellets of hardmetal (carbide) - Dimensions |
| ISO 2931-1983 | 铝和铝合金的阳极氧化 用导纳或阻抗测量法评定阳极氧化膜的封孔质量 | Anodizing of aluminium and its alloys; Assessment of quality of sealed anodic oxide coatings by measurement of admittance or impedance |
| ISO 3110-1975 | 铜合金 合金元素铝含量的测定 容量法 | Copper alloys; Determination of aluminium as alloying element; Volumetric method |
| ISO 3111-1975 | 铜合金 合金元素锡含量的测定 容量法 | Copper alloys; Determination of tin as alloying element; Volumetric method |
| ISO 3112-1975 | 铜和铜合金 铅含量的测定 萃取滴定法 | Copper and copper alloys; Determination of lead; Extracting titration method |
| ISO 3116-2007 | 镁和镁合金.锻造的镁合金 | Magnesium and magnesium alloys - Wrought magnesium alloys |
| ISO 3134-1-1985 | 轻金属及其合金 术语和定义 第1部分:材料 三种语言版 | Light metals and their alloys; Terms and definitions; Part 1 : Materials Trilingual edition |
| ISO 3134-2-1985 | 轻金属及其合金 术语和定义 第2部分:未加工产品 三种语言版 | Light metals and their alloys; Terms and definitions; Part 2 : Unwrought products Trilingual edition |
| ISO 3134-3-1985 | 轻金属及其合金 术语和定义 第3部分:加工产品 三种语言版 | Light metals and their alloys; Terms and definitions; Part 3 : Wrought products Trilingual edition |
| ISO 3134-4-1985 | 轻金属及其合金 术语和定义 第4部分:铸件 三种语言版 | Light metals and their alloys; Terms and definitions; Part 4 : Castings Trilingual edition |
| ISO 3134-5-1981 | 轻金属及其合金 术语和定义 第5部分:加工和处理方法 | Light metals and their alloys; Terms and definitions; Part 5 : Methods of processing and treatment |
| ISO 3160-1 AMD 1-2000 | 表壳及其附件 金合金覆盖层 第1部分:一般要求 修改1 | Watch-cases and accessories - Gold alloy coverings - Part 1: General requirements; Amendment 1 |
| ISO 3160-1-1998 | 表壳及其附件 金合金覆盖层 第1部分:一般要求 | Watch-cases and accessories - Gold alloy coverings - Part 1: General requirements |
| ISO 3160-2-2003 | 表壳和附件.金合金壳.第2部分:光洁度、厚度、抗腐蚀性和粘附性测定 | Watch-cases and accessories - Gold alloy coverings - Part 2: Determination of fineness, thickness, corrosion resistance and adhesion |
| ISO 3210-1983 | 铝和铝合金的阳极氧化 磷-铬酸法评定阳极氧化膜的封孔质量 | Anodizing of aluminium and its alloys; Assessment of quality of sealed anodic oxide coatings by measurement of the loss of mass after immersion in phosphoric-chromic acid solution |
| ISO 3211-1977 | 铝和铝合金的阳极氧化 阳极氧化膜抗变形破裂性的评定 | Anodizing of aluminium and its alloys; Assessment of resistance of anodic oxide coatings to cracking by deformation |
| ISO 3220-1975 | 铜和铜合金 砷含量的测定 光度法 | Copper and copper alloys; Determination of arsenic; Photometric method |
| ISO 3255-1974 | 镁和镁合金 铝含量的测定 铬天青S光度法 | Magnesium and magnesium alloys; Determination of aluminium; Chromazurol S photometric method |
| ISO 3256-1977 | 铝和铝合金 镁含量的测定 原子吸收分光光度法 | Aluminium and aluminium alloys; Determination of magnesium; Atomic absorption spectrophotometric method |
| ISO 3312-1987 | 烧结金属材料和硬质合金 弹性模量的测定 | Sintered metal materials and hardmetals; Determination of Young modulus |
| ISO 3326-1975 | 硬质合金 (磁化)矫顽(磁)力的测定 | Hardmetals; Determination of (the magnetization) coercivity |
| ISO 3327-1982 | 硬质合金 横向断裂强度的测定 | Hardmetals; Determination of transverse rupture strength |
| ISO 3364-1997 | 有圆柱形固定孔和圆角的可转位硬质合金(碳化)刀片 尺寸 | Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole - Dimensions |
| ISO 3365-1985 | 去毛边无固定孔的可转位硬质合金(碳化)刀片 尺寸 | Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole; Dimensions |
| ISO 3369-2006 | 致密烧结金属材料与硬质合金密度测定方法 | Impermeable sintered metal materials and hardmetals - Determination of density |
| ISO 3419-1981 | 非合金钢和合金钢对焊管件 | Non-alloy and alloy steel butt-welding fittings |
| ISO 3613-2000 | 锌、镉、铝锌合金和锌铝合金的铬酸盐转化膜 试验方法 | Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods |
| ISO 3690-2000 | 焊接 碳钢和低合金钢手工焊熔敷金属扩散氢的测定 | Welding and allied processes - Determination of hydrogen content in ferritic steel arc weld metal |
| ISO 3713-1987 | 铁合金 取样和样品制备 一般规则 | Ferroalloys; Sampling and preparation of samples; General rules |
| ISO 3738-1-1982 | 硬质合金 洛氏硬度试验(A标尺) 第1部分:试验方法 | Hardmetals; Rockwell hardness test (scale A); Part 1 : Test method |
| ISO 3738-2-1988 | 硬质合金 洛氏硬度试验(A标尺) 第2部分:标准试块的制备及检定 | Hardmetals; Rockwell hardness test (scale A); part 2: preparation and calibration of standard test blocks |
| ISO 3750-2006 | 锌合金.镁含量的测定.火焰原子吸收光谱法 | Zinc alloys - Determination of magnesium content - Flame atomic absorption spectrometric method |
| ISO 3815-1-2005 | 锌和锌合金.第1部分:用光发射光谱测定法分析固体样品 | Zinc and zinc alloys - Part 1: Analysis of solid samples by optical emission spectrometry |
| ISO 3815-2-2005 | 锌和锌合金.第2部分:用电感耦合等离子体光发射光谱测定法分析 | Zinc and zinc alloys - Part 2: Analysis by inductively coupled plasma optical emission spectrometry |
| ISO 3823-1-1997 | 牙科旋转器械 牙钻 第1部分:不锈钢牙钻和硬质合金牙钻 | Dental rotary instruments - Burs - Part 1: Steel and carbide burs |
| ISO 3878-1983 | 硬质合金 维氏硬度试验 | Hardmetals; Vickers hardness test |
| ISO 3907-1985 | 硬质合金 总碳量的测定 重量法 | Hardmetals; Determination of total carbon content; Gravimetric method |
| ISO 3908-1985 | 硬质合金 不溶性(游离)碳含量的测定 重量法 | Hardmetals; Determination of insoluble (free) carbon content; Gravimetric method |
| ISO 3909-1976 | 硬质合金 钴含量的测定 电位滴定法 | Hardmetals; Determination of cobalt; Potentiometric method |
| ISO 3927-2001 | 金属粉末,不包括硬质合金粉末 单轴向压制时压缩性(压实性)的测定 | Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression |
| ISO 3978-1976 | 铝和铝合金 铬含量的测定 萃取二苯卡巴肼分光光度法 | Aluminium and aluminium alloys; Determination of chromium; Spectrophotometric method using diphenylcarbazide, after extraction |
| ISO 3979-1977 | 铝和铝合金 镍含量的测定 丁二酮肟分光光度法 | Aluminium and aluminium alloys; Determination of nickel; Spectrophotometric method using dimethylglyoxime |
| ISO 3980-1977 | 铝和铝合金 铜含量的测定 原子吸收分光光度法 | Aluminium and aluminium alloys; Determination of copper; Atomic absorption spectrophotometric method |
| ISO 3981-1977 | 铝和铝合金 镍含量的测定 原子吸收分光光度法 | Aluminium and aluminium alloys; Determination of nickel; Atomic absorption spectrophotometric method |
| ISO 4058-1977 | 镁和镁合金 镍含量的测定 丁二酮肟光度法 | Magnesium and its alloys; Determination of nickel; Photometric method using dimethylglyoxime |
| ISO 4139-1979 | 硅铁合金 铝含量的测定 火焰原子吸收光谱法 | Ferrosilicon; determination of aluminium content; Flame atomic absorption spectrometric method |
| ISO 4145-1986 | 符合ISO 7/1螺纹标准的非合金钢配件 | Non-alloy steel fittings threaded to ISO 7/1 |
| ISO 4158-1978 | 硅铁合金、硅锰铁和硅铬铁 硅含量的测定 重量法 | Ferrosilicon, ferrosilicomanganese and ferrosilicochromium; Determination of silicon content; Gravimetric method |
| ISO 4192-1981 | 铝和铝合金 铅含量的测定 火焰原子吸收光谱法 | Aluminium and aluminium alloys; Determination of lead content; Flame atomic absorption spectrometric method |
| ISO 4193-1981 | 铝和铝合金 铬含量的测定 火焰原子吸收光谱法 | Aluminium and aluminium alloys; Determination of chromium content; Flame atomic absorption spectrometric method |
| ISO 4194-1981 | 镁合金 锌含量的测定 火焰原子吸收光谱法 | Magnesium alloys; Determination of zinc content; Flame atomic absorption spectrometric method |
| ISO 4379-1993 | 滑动轴承.铜合金衬套 | Plain bearings; copper alloy bushes |
| ISO 4381-2000 | 滑动轴承 多层滑动轴承用铅锡铸造合金 | Plain bearings - Lead and tin casting alloys for multilayer plain bearings |
| ISO 4382-1-1991 | 滑动轴承 铜合金 第1部分:单层和多层厚壁滑动轴承用铸造合金 | Plain bearings; copper alloys; part 1: cast copper alloys for solid and multilayer thick-walled plain bearings |
| ISO 4382-2-1991 | 滑动轴承 铜合金 第2部分:单层滑动轴承用锻造合金 | Plain bearings; copper alloys; part 2: wrought copper alloys for solid plain bearings |
| ISO 4384-1-2000 | 滑动轴承 轴承合金的硬度试验 第1部分:复合材料 | Plain bearings - Hardness testing of bearing metals - Part 1: Compound materials |
| ISO 4384-2-1982 | 滑动轴承 轴承合金的硬度试验 第2部分:单层材料 | Plain bearings; Hardness testing of bearing metals; Part 2 : Solid materials |
| ISO 4489-1978 | 烧结硬质合金制品 取样和试验方法 | Sintered hardmetals; Sampling and testing |
| ISO 4492-1985 | 金属粉末,不包括硬质合金粉末 与压实与烧结有关的尺寸变化的测定 | Metallic powders, excluding powders for hardmetals; Determination of dimensional changes associated with compacting and sintering |
| ISO 4499-1978 | 硬质合金 显微组织的金相检验 | Hardmetals; Metallographic determination of microstructure |
| ISO 4501-1978 | 硬质合金 钛含量的测定 过氧化物光度法 | Hardmetals; Determination of titanium; Photometric peroxide method |
| ISO 4503-1978 | 硬质合金 用X射线荧光测定金属元素的含量 熔化法 | Hardmetals; Determination of contents of metallic elements by X-ray fluorescense; Fusion method |
| ISO 4505-1978 | 硬质合金 孔隙率和游离碳的金相测定 | Hardmetals; Metallographic determination of porosity and uncombined carbon |
| ISO 4506-1979 | 硬质合金 压缩试验 | Hardmetals; Compression test |
| ISO 4521-1985 | 金属覆盖层 工程用银和银合金电镀层 | Metallic coatings; Electrodeposited silver and silver alloy coatings for engineering purposes |
| ISO 4522-1-1985 | 金属覆盖层.银和银合金电镀层的试验方法.第1部分:镀层厚度的测量 | Metallic coatings; Test methods for electrodeposited silver and silver alloy coatings; Part 1: Determination of coating thickness |
| ISO 4522-2-1985 | 金属覆盖层.银和银合金电镀层的试验方法.第2部分:粘着力试验 | Metallic coatings; Test methods for electrodeposited silver and silver alloy coatings; Part 2: Adhesion tests |
| ISO 4522-3-1988 | 金属覆盖层 银和银合金电镀层的试验方法 第3部分:残留盐的测定 | Metallic coatings; test methods for electrodeposited silver and silver alloy coatings; part 3: determination of the presence of residual salts |
| ISO 4523-1985 | 金属覆盖层 工程用金和金合金电镀层 | Metallic coatings; Electrodeposited gold and gold alloy coatings for engineering purposes |
| ISO 4524-1-1985 | 金属覆盖层 金和金合金电镀层的试验方法 第1部分:镀层厚度的测量 | Metallic coatings; Test methods for electrodeposited gold and gold alloy coatings; Part 1 : Determination of coating thickness |
| ISO 4524-2-2000 | 金属覆盖层 金和金合金电镀层的试验方法 第2部分:混合流动气体(MFG)环境试验 | Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 2: Mixed flowing gas (MFG) environmental tests |
| ISO 4524-3-1985 | 金属覆盖层 金和金合金电镀层的试验方法 第3部分:孔隙率的电图试验 | Metallic coatings; Test methods for electrodeposited gold and gold alloy coatings; Part 3 : Electrographic tests for porosity |
| ISO 4524-4-1985 | 金属覆盖层 金和金合金电镀层的试验方法 第4部分:金含量的测定 | Metallic coatings; Test methods for electrodeposited gold and gold alloy coatings; Part 4 : Determination of gold content |
| ISO 4524-5-1985 | 金属覆盖层 金和金合金电镀层的试验方法 第5部分:附着力试验 | Metallic coatings; Test methods for electrodeposited gold and gold alloy coatings; Part 5 : Adhesion tests |
| ISO 4524-6-1988 | 金属覆盖层 金和金合金电镀层的试验方法 第6部分:残留盐的测定 | Metallic coatings; test methods for electrodeposited gold and gold alloy coatings; part 6: determination of the presence of residual salts |
| ISO 4527-2003 | 金属覆层.自动催化(无电)的镍磷合金覆层.规范和试验方法 | Metallic coatings - Autocatalytic (electroless) nickel-phosphorus alloy coatings - Specification and test methods |
| ISO 4551-1987 | 铁合金 取样和筛分 | Ferroalloys; Sampling and sieve analysis |
| ISO 4552-1-1987 | 铁合金 化学分析用样品的取制样 第1部分:铬铁、硅铬铁、硅铁、硅锰铁和锰铁 | Ferroalloys; Sampling and sample preparation for chemical analysis; Part 1 : Ferrochromium, ferrosilicochromium, ferrosilicon, ferrosilicomanganese, ferromanganese |
| ISO 4552-2-1987 | 铁合金 化学分析用样品的取制样 第2部分:钛铁、钼铁、钨铁、钽铁、铌铁和钒铁 | Ferroalloys; Sampling and sample preparation for chemical analysis; Part 2 : Ferrotitanium, ferromolybdenum, ferrotungsten, ferroniobium, ferrovanadium |
| ISO 4739-1985 | 加工铜和铜合金产品 力学性能试验用试料和试样的选择和制备 | Wrought copper and copper alloy products; Selection and preparation of specimens and test pieces for mechanical testing |
| ISO 4740-1985 | 铜和铜合金 锌含量的测定 火焰原子吸收光谱法 | Copper and copper alloys; Determination of zinc content; Flame atomic absorption spectrometric method |
| ISO 4741-1984 | 铜和铜合金 磷含量的测定 钼钒酸盐光谱法 | Copper and copper alloys; Determination of phosphorus content; Molybdovanadate spectrometric method |
| ISO 4742-1984 | 铜合金 镍含量的测定 重量法 | Copper alloys; Determination of nickel content; Gravimetric method |
| ISO 4743-1984 | 铜合金 镍含量的测定 滴定法 | Copper alloys; Determination of nickel content; Titrimetric method |
| ISO 4744-1984 | 铜和铜合金 铬含量的测定 火焰原子吸收光谱法 | Copper and copper alloys; Determination of chromium content; Flame atomic absorption spectrometric method |
| ISO 4748-1984 | 铜合金 铁含量的测定 Na2EDTA滴定法 | Copper alloys; Determination of iron content; Na2EDTA titrimetric method |
| ISO 4749-1984 | 铜合金 铅含量的测定 火焰原子吸收光谱法 | Copper alloys; Determination of lead content; Flame atomic absorption spectrometric method |
| ISO 4751-1984 | 铜和铜合金 锡含量的测定 光谱法 | Copper and copper alloys; Determination of tin content; Spectrometric method |
| ISO 4883-1978 | 硬质合金 用X射线荧光测定金属元素的含量 溶液法 | Hardmetals; Determination of contents of metallic elements by X-ray fluorescence; Solution method |
| ISO 4884-1978 | 硬质合金 用烧结试件进行粉末的取样和试验 | Hardmetals; Sampling and testing of powders using sintered test pieces |
| ISO 4948-1-1982 | 钢 分类 第1部分:根据化学成分对非合金钢和合金钢的分类 | Steels; Classification; Part 1 : Classification of steels into unalloyed and alloy steels based on chemical composition |
| ISO 4948-2-1981 | 钢 分类 第2部分:根据主要质量等级和主要性能或应用特性对非合金钢和合金钢的分类 | Steels; Classification; Part 2 : Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics |
| ISO 4999-2005 | 商用、拉制和建筑用连续热镀锡(铅合金)冷轧碳素薄钢板 | Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities |
| ISO 504-1975 | 硬质合金车刀 名称和标志 | Turning tools with carbide tips; Designation and marking |
| ISO 514-1975 | 硬质合金车刀 内圆车刀 | Turning tools with carbide tips; Internal tools |
| ISO 5193-1981 | 加工铝和铝合金 拉制圆棒材 尺寸和形位(直径采用对称正负偏差)偏差 | Wrought aluminium and aluminium alloys; Drawn round bars; Tolerances on shape and dimensions (Symmetric plus and minus tolerances on diameter) |
| ISO 5194-1981 | 铝和铝合金 锌含量的测定 火焰原子吸收光谱法 | Aluminium and aluminium alloys; Determination of zinc content; Flame atomic absorption spectrometric method |
| ISO 5196-1-1980 | 镁合金 钍的测定 第1部分:重量法 | Magnesium alloys; Determination of thorium; Part 1 : Gravimetric method |
| ISO 5196-2-1980 | 镁合金 钍的测定 第2部分:滴定法 | Magnesium alloys; Determination of thorium; Part 2 : Titrimetric method |
| ISO 5226-1985 | 石油和天然气工业用材料和设备.油井或天然气井用铝合金钻管 | Materials and equipment for petroleum and natural gas industries; Aluminium alloy drill pipe for oil or natural gas wells |
| ISO 5396-1977 | 硬质合金的镦锻模 术语 两种语言版 | Hardmetal heading dies; Terminology Bilingual edition |
| ISO 5407-1981 | 用于镦锻模的烧结硬质合金片 尺寸和公差 | As-sintered hardmetal pellets used in heading dies; Dimensions and tolerances |
| ISO 5445-1980 | 硅铁合金 规范和交货条件 | Ferrosilicon; Specification and conditions of delivery |
| ISO 5468-2006 | 旋转和旋转冲击式硬质合金圬工钻.尺寸 | Rotary and rotary impact masonry drill bits with hardmetal tips - Dimensions |
| ISO 5817 Technical Corrigendum 1-2006 | 焊接.钢、镍、钛及其合金的熔焊接缝(束焊除外).缺陷的质量等级.技术勘误1 | Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections; Technical Corrigendum 1 |
| ISO 5817-2003 | 焊接.钢、镍、钛及其合金熔焊接头(束焊除外).缺陷的质量分级 | Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections |
| ISO 5832-11-1994 | 外科植入物 金属材料 第11部分:锻造钛6铝7铌合金 | Implants for surgery - Metallic materials - Part 11: Wrought titanium 6-aluminium 7-niobium alloy |
| ISO 5832-12-2007 | 外科植入物 金属材料 第12部分:锻造钴铬钼合金 | Implants for surgery - Metallic materials - Part 12: Wrought cobalt-chromium-molybdenum alloy |
| ISO 5832-14-2007 | 外科植入物.金属材料.第14部分:可锻钛15-钼5-锆3-铝合金 | Implants for surgery - Metallic materials - Part 14: Wrought titanium 15-molybdenum 5-zirconium 3-aluminium alloy |
| ISO 5832-3-1996 | 外科植入物 金属材料 第3部分:锻造钛6铝4钒合金 | Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy |
| ISO 5832-4-1996 | 外科植入物 金属材料 第4部分:钴铬钼铸造合金 | Implants for surgery - Metallic materials - Part 4: Cobalt-chromium-molybdenum casting alloy |
| ISO 5832-5-2005 | 外科植入物.金属材料.第5部分:锻造钴铬钨镍合金 | Implants for surgery - Metallic materials - Part 5: Wrought cobalt-chromium-tungsten-nickel alloy |
| ISO 5832-6-1997 | 外科植入物 金属材料 第6部分:锻造钴镍铬钼合金 | Implants for surgery - Metallic materials - Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy |
| ISO 5832-7-1994 | 外科植入物 金属材料 第7部分:锻造冷成形钴铬镍钼合金 | Implants for surgery; metallic materials; part 7: forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy |
| ISO 5832-8-1997 | 外科植入物 金属材料 第8部分:锻造钴镍铬钼钨铁合金 | Implants for surgery - Metallic materials - Part 8: Wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy |
| ISO 5857-1988 | 航空航天 强度等级1250 MPa带有MJ螺纹的合金钢凸头螺栓 采购规范 | Aerospace; alloy steel protruding head bolts with strength classification 1250 MPa and MJ threads; procurement specification |
| ISO 5956-1984 | 铜和铜合金 锑含量的测定 若丹明B光谱法 | Copper and copper alloys; Determination of antimony content; Rhodamine B spectrometric method |
| ISO 5959-1984 | 铜和铜合金 铋含量的测定 二乙基二硫代氨基甲酸盐光谱法 | Copper and copper alloys; Determination of bismuth content; Diethyldithiocarbamate spectrometric method |
| ISO 5960-1984 | 铜合金 镉含量的测定 火焰原子吸收光谱法 | Copper alloys; Determination of cadmium content; Flame atomic absorption spectrometric method |
| ISO 6207-1992 | 镍和镍合金无缝管 | Seamless nickel and nickel alloy tube |
| ISO 6208-1992 | 镍和镍合金板、薄板和带材 | Nickel and nickel alloy plate, sheet and strip |
| ISO 6279-2006 | 滑动轴承.固体轴承用铝合金 | Plain bearings - Aluminium alloys for solid bearings |
| ISO 6305-2-2007 | 铁道部件.交货技术条件.第2部分:非合金碳钢垫板 | Railway components - Technical delivery requirements - Part 2: Non-alloy carbon steel baseplates |
| ISO 636-2004 | 焊接消耗品.非合金钢和细粒钢的钨惰性气体焊用焊条、焊丝和溶敷金属.分类 | Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification |
| ISO 6361-1-1986 | 加工铝和铝合金薄板、带、厚板 第1部分:交货和验收的技术条件 | Wrought aluminium and aluminium alloy sheets, strips and plates; Part 1 : Technical conditions for inspection and delivery |
| ISO 6361-2-1990 | 加工铝和铝合金薄板、带、厚板 第2部分:力学性能 | Wrought aluminium and aluminium alloy sheets, strips and plates; part 2: mechanical properties |
| ISO 6361-3-1985 | 加工铝和铝合金薄板、带、厚板 第3部分:带材 尺寸和形状公差 | Wrought aluminium and aluminium alloy sheets, strips and plates; Part 3 : Strips; Tolerances on shape and dimensions (Previously referenced DIS 8219) |
| ISO 6361-4-1988 | 加工铝和铝合金薄板、带、厚板 第4部分:薄板和厚板 尺寸和形状公差 | Wrought aluminium and aluminium alloy sheets, strips and plates; part 4: sheets and plates; tolerances on shape and dimensions |
| ISO 6362-1-1986 | 加工铝和铝合金挤压棒/条材、管材和型材 第1部分:验收和交货的技术条件 | Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles; Part 1 : Technical conditions for inspection and delivery |
| ISO 6362-2-1990 | 加工铝和铝合金挤压棒/条材、管材和型材 第2部分:力学性能 | Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles; part 2: mechanical properties |
| ISO 6362-3-2001 | 加工铝和铝合金挤压棒/条材、管材和型材 第3部分：挤压矩形棒材 形状和尺寸公差 | Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles - Part 3: Extruded rectangular bars; Tolerances on shape and dimensions |
| ISO 6362-4-1988 | 加工铝和铝合金挤压棒/条材、管材和型材 第4部分:挤压型材 尺寸和形状公差 | Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles; part 4: extruded profiles; tolerances on shape and dimensions |
| ISO 6362-5-2001 | 加工铝和铝合金挤压棒/条材、管材和型材 第5部分:挤压圆形、正方形和六角形棒材 尺寸和形状公差 | Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles - Part 5: Extruded round, square and hexagonal bars; Tolerances on shape and dimensions |
| ISO 6363-1-1988 | 加工铝和铝合金冷拉棒/条材和管材 第1部分:验收及交货的技术条件 | Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes; part 1: technical conditions for inspection and delivery |
| ISO 6363-2-1993 | 加工铝和铝合金冷拉棒/条材和管材 第2部分:力学性能 | Wrought aluminium and aluminium alloy; cold-drawn rods/bars and tubes; part 2: mechanical properties |
| ISO 6363-4-1991 | 加工铝和铝合金冷拉棒/条材和管材 第4部分:拉制矩形棒材 尺寸和形状公差 | Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes; part 4: drawn rectangular bars; tolerances on form and dimensions |
| ISO 6363-5-1992 | 加工铝和铝合金冷拉棒/条材和管材 第5部分:冷拉方形和六角形棒材 尺寸和形状公差 | Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes; part 5: drawn square and hexagonal bars; tolerances on form and dimensions |
| ISO 6365-1-1988 | 加工铝和铝合金冷拉线材 第1部分:验收及交货的技术条件 | Wrought aluminium and aluminium alloy cold-drawn wire; part 1: technical conditions for inspection and delivery |
| ISO 6372-1-1989 | 镍和镍合金 术语和定义 第1部分:材料 两种语言版 | Nickel and nickel alloys; terms and definitions; part 1: materials |
| ISO 6372-2-1989 | 镍和镍合金 术语和定义 第2部分:精炼产品 两种语言版 | Nickel and nickel alloys; terms and definitions; part 2: refinery products |
| ISO 6372-3-1989 | 镍和镍合金 术语和定义 第3部分:加工产品和铸件 两种语言版 | Nickel and nickel alloys; terms and definitions; part 3: wrought products and castings |
| ISO 6437-1984 | 铜合金 铬含量的测定 滴定法 | Copper alloys; Determination of chromium content; Titrimetric method |
| ISO 6509-1981 | 金属与合金的腐蚀 黄铜耐脱锌性的测定 | Corrosion of metals and alloys; Determination of dezincification resistance of brass |
| ISO 6581-1980 | 铝和铝合金的阳极氧化 着色阳极氧化膜耐紫外光的测定 | Anodizing of aluminium and its alloys; Determination of the fastness to ultra-violet light of coloured anodic oxide coatings |
| ISO 6719-1986 | 阳极氧化铝和铝合金 用积分球仪法测量铝表面的反射特性 | Anodized aluminium and aluminium alloys; Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments |
| ISO 6827-1981 | 铝和铝合金 钛含量的测定 二安替吡啉甲烷光度法 | Aluminium and aluminium alloys; Determination of titanium content; Diantipyrylmethane photometric method |
| ISO 683-1-1987 | 热处理钢、合金钢和易切钢 第1部分:按照不同成形的黑钢制件直接硬化的非合金钢和低合金锻钢 | Heat-treatable steels, alloy steels and free-cutting steels; Part 1 : Direct-hardening unalloyed and low alloyed wrought steel in form of different black products |
| ISO 683-10-1987 | 热处理钢、合金钢和易切钢 第10部分:压力加工渗氮钢 | Heat-treatable steels, alloy steels and free-cutting steels; Part 10 : Wrought nitriding steels |
| ISO 683-11-1987 | 热处理钢、合金钢和易切钢 第11部分:压力加工表面硬化钢 | Heat-treatable steels, alloy steels and free-cutting steels; Part 11 : Wrought case-hardening steels |
| ISO 683-14-2004 | 热处理钢、合金钢和易切钢.第14部分:淬火回火弹簧用热轧钢 | Heat-treatable steels, alloy steels and free-cutting steels - Part 14: Hot-rolled steels for quenched and tempered springs |
| ISO 683-15-1992 | 热处理钢、合金钢和易切钢 第15部分:内燃机用阀门钢 | Heat-treatable steels, alloy steels and free-cutting steels; part 15: valve steels for internal combustion engines |
| ISO 683-17-1999 | 热处理钢、合金钢和易切钢 第17部分:滚球和滚柱轴承钢 | Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels |
| ISO 683-18-1996 | 热处理钢、合金钢和易切钢 第18部分:非合金和低合金钢光亮制品 | Heat-treatable steels, alloy steels and free-cutting steels - Part 18: Bright products of unalloyed and low alloy steels |
| ISO 683-9-1988 | 热处理钢、合金钢和易切削钢.第9部分:锻造易切削钢 | Heat-treatable steels, alloy steels and free-cutting steels; part 9: wrought free-cutting steels |
| ISO 6957-1988 | 铜合金 抗应力腐蚀氨熏试验 | Copper alloys; ammonia test for stress corrosion resistance |
| ISO 6978-2 Technical Corrigendum 2-2006 | 天然气.汞的测定.第2部分:用金/铂合金混汞法对汞的采样.技术勘误2 | Natural gas - Determination of mercury - Part 2: Sampling of mercury by amalgamation on gold/platinum alloy; Technical Corrigendum 2 |
| ISO 6978-2-2003 | 天然气.汞的测定.第2部分:用碘/铂合金混汞法对汞的采样 | Natural gas - Determination of mercury - Part 2: Sampling of mercury by amalgamation on gold/platinum alloy |
| ISO 6984-1990 | 矿山提升钢丝绳用非合金钢丝 规范 | Round non-alloy steel wires for stranded wire ropes for mine hoisting; specifications |
| ISO 6987-1998 | 有部分圆柱形固定孔和圆角的可转位硬质合金刀片 尺寸 | Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole - Dimensions |
| ISO 7005-3-1988 | 金属法兰 第3部分:铜合金和复合法兰 | Metallic flanges; part 3: copper alloy and composite flanges |
| ISO 7087-1984 | 铁合金 评估质量偏差的实验方法和检验取样精度的方法 | Ferroalloys; Experimental methods for the evaluation of the quality variation and methods for checking the precision of sampling |
| ISO 7141-2005 | 道路车辆.轻合金轮.碰撞试验 | Road vehicles - Light alloy wheels - Impact test |
| ISO 7266-1984 | 铜和铜合金 硫含量的测定 燃烧滴定法 | Copper and copper alloys; Determination of sulfur content; Combustion titrimetric method |
| ISO 7271-1982 | 铝和铝合金 箔材和薄带材 尺寸公差 | Aluminium and aluminium alloys; Foil and thin strip; Dimensional tolerances |
| ISO 7273-1981 | 锻铝和铝合金.挤压圆型材.形状和尺寸公差 | Wrought aluminium and aluminium alloys; Extruded round bars; Tolerances on shape and dimensions |
| ISO 7274-1981 | 加工铝和铝合金 冷拉圆棒材 尺寸和形状公差(直径采用负公差) | Wrought aluminium and aluminium alloys - Drawn round bars - Tolerances on shape and dimensions (All minus tolerances on diameter) |
| ISO 7347-1987 | 铁合金 检验取样和样品制备偏差的试验方法 | Ferroalloys; Experimental methods for checking the bias of sampling and sample preparation |
| ISO 7373-1987 | 铁合金 检验样品缩分精度的试验方法 | Ferroalloys; Experimental methods for checking the precision of sample division |
| ISO 7441-1984 | 金属与合金的腐蚀 户外暴露腐蚀试验中双金属腐蚀的测定 | Corrosion of metals and alloys; Determination of bimetallic corrosion in outdoor exposure corrosion tests |
| ISO 7488-1991 | 牙科银汞合金搅拌器 | Dental amalgamators |
| ISO 7524-1985 | 镍、镍铁和镍合金 碳含量的测定 感应电炉燃烧后红外线吸收法 | Nickel, ferronickel and nickel alloys; determination of carbon content; infra-red absorption method after induction furnace combustion |
| ISO 7526-1985 | 镍、镍铁和镍合金 硫含量的测定 感应电炉燃烧后红外线吸收法 | Nickel, ferronickel and nickel alloys; Determination of sulfur content; Infra-red absorption method after induction furnace combustion |
| ISO 7527-1985 | 镍、镍铁和镍合金 硫含量的测定 感应电炉燃烧后碘量滴定法 | Nickel, ferronickel and nickel alloys; Determination of sulfur content; Iodimetric titration method after induction furnace combustion |
| ISO 7528-1989 | 镍合金 铁含量的测定 重铬酸钾滴定法 | Nickel alloys; determination of iron content; titrimetric method with potassium dichromate |
| ISO 7529-1989 | 镍合金 铬含量的测定 硫酸铁(II)铵电位滴定法 | Nickel alloys; determination of chromium content; potentiometric titration method with ammonium iron(II) sulfate |
| ISO 7530-1-1990 | 镍合金 火焰原子吸收光谱法 第1部分:一般要求和试样溶解 | Nickel alloys; flame atomic absorption spectrometric analysis; part 1: general requirements and sample dissolution |
| ISO 7530-2-1990 | 镍合金 火焰原子吸收光谱法 第2部分:钴含量测定 | Nickel alloys; flame atomic absorption spectrometric analysis; part 2: determination of cobalt content |
| ISO 7530-3-1990 | 镍合金 火焰原子吸收光谱法 第3部分:铬含量测定 | Nickel alloys; flame atomic absorption spectrometric analysis; part 3: determination of chromium content |
| ISO 7530-4-1990 | 镍合金 火焰原子吸收光谱法 第4部分:铜含量测定 | Nickel alloys; flame atomic absorption spectrometric analysis; part 4: determination of copper content |
| ISO 7530-5-1990 | 镍合金 火焰原子吸收光谱法 第5部分:铁含量测定 | Nickel alloys; flame atomic absorption spectrometric analysis; part 5: determination of iron content |
| ISO 7530-6-1990 | 镍合金 火焰原子吸收光谱法 第6部分:锰含量测定 | Nickel alloys; flame atomic absorption spectrometric analysis; part 6: determination of manganese content |
| ISO 7530-7-1992 | 镍合金 火焰原子吸收光谱法 第7部分:铝含量测定 | Nickel alloys; flame atomic absorption spectrometric analysis; part 7: determination of aluminium content |
| ISO 7530-8-1992 | 镍合金 火焰原子吸收光谱法 第8部分:硅含量测定 | Nickel alloys; flame atomic absorption spectrometric analysis; part 8: determination of silicon content |
| ISO 7530-9-1993 | 镍合金 火焰原子吸收光谱法 第9部分:钒含量的测定 | Nickel alloys; flame atomic absorption spectrometric analysis; part 9: determination of vanadium content |
| ISO 7539-1-1987 | 金属与合金的腐蚀 应力腐蚀试验 第1部分:试验程序的通用指南 | Corrosion of metals and alloys - Stress corrosion testing - Part 1: General guidance on testing procedures |
| ISO 7539-2-1989 | 金属与合金的腐蚀 应力腐蚀试验 第2部分:弯梁试样的制备和使用 | Corrosion of metals and alloys - Stress corrosion testing - Part 2: Preparation and use of bent-beam specimens |
| ISO 7539-3-1989 | 金属与合金的腐蚀 应力腐蚀试验 第3部分:U型弯曲试样的制备和使用 | Corrosion of metals and alloys; stress corrosion testing; part 3: preparation and use of U-bend specimens |
| ISO 7539-4-1989 | 金属与合金的腐蚀 应力腐蚀试验 第4部分:轴向载荷拉伸试样的制备和使用 | Corrosion of metals and alloys - Stress corrosion testing - Part 4: Preparation and use of uniaxially loaded tension specimens |
| ISO 7539-5-1989 | 金属与合金的腐蚀 应力腐蚀试验 第5部分:C-环形试样的制备和使用 | Corrosion of metals and alloys - Stress corrosion testing - Part 5: Preparation and use of C-ring specimens |
| ISO 7539-6-2003 | 金属和合金的腐蚀.应力腐蚀试验.第6部分:恒定负荷或恒定位移条件下试验用预破裂试样的制备 | Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of pre-cracked specimens for tests under constant load or constant displacement |
| ISO 7539-7-2005 | 金属与合金的腐蚀.应力腐蚀试验.第7部分:慢速率应力试验方法 | Corrosion of metals and alloys - Stress corrosion testing - Part 7: Method for slow strain rate testing |
| ISO 7539-8-2000 | 金属与合金的腐蚀 应力腐蚀试验 第8部分:评估焊件试样的制备和使用 | Corrosion of metals and alloys - Stress corrosion testing - Part 8: Preparation and use of specimens to evaluate weldments |
| ISO 7539-9-2003 | 金属和合金的腐蚀.应力腐蚀试验.第9部分:在提升荷载或提升位移下试验用预裂纹试样的制备和使用 | Corrosion of metals and alloys - Stress corrosion testing - Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement |
| ISO 7583-1986 | 铝和铝合金的阳极氧化 术语 三种语言版 | Anodizing of aluminium and its alloys; Vocabulary Trilingual edition |
| ISO 7587-1986 | 锡铅合金电镀层 规范和试验方法 | Electroplated coatings of tin-lead alloys; Specification and test methods |
| ISO 7599-1983 | 铝和铝合金的阳极氧化 铝的阳极氧化膜一般规范 | Anodizing of aluminium and its alloys; General specifications for anodic oxide coatings on aluminium |
| ISO 7627-1-1983 | 硬质合金 火焰原子吸收光谱法的化学分析 第1部分:一般要求 | Hardmetals; Chemical analysis by flame atomic absorption spectrometry; Part 1 : General requirements |
| ISO 7627-2-1983 | 硬质合金 火焰原子吸收光谱法的化学分析 第2部分:钙、钾、镁和钠含量(0.001%～0.02%m/m)的测定 | Hardmetals; Chemical analysis by flame atomic absorption spectrometry; Part 2 : Determination of calcium, potassium, magnesium and sodium in contents from 0,001 to 0,02 % (m/m) |
| ISO 7627-3-1983 | 硬质合金 火焰原子吸收光谱法的化学分析 第3部分:钴、铁、锰和镍含量(0.01%～0.5%m/m)的测定 | Hardmetals; Chemical analysis by flame atomic absorption spectrometry; Part 3 : Determination of cobalt, iron, manganese and nickel in contents from 0,01 to 0,5 % (m/m) |
| ISO 7627-4-1983 | 硬质合金 火焰原子吸收光谱法的化学分析 第4部分:钼、钛和钒含量(0.01%～0.5%m/m)的测定 | Hardmetals; Chemical analysis by flame atomic absorption spectrometry; Part 4 : Determination of molybdenum, titanium and vanadium in contents from 0,01 to 0,5 % (m/m) |
| ISO 7627-5-1983 | 硬质合金 火焰原子吸收光谱法的化学分析 第5部分:钴、铁、锰、钼、镍、钛和钒含量(0.5%～2%m/m)的测定 | Hardmetals; Chemical analysis by flame atomic absorption spectrometry; Part 5 : Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0,5 to 2 % (m/m) |
| ISO 7627-6-1985 | 硬质合金 火焰原子吸收光谱法的化学分析 第6部分:铬含量(0.0%～2%m/m)的测定 | Hardmetals; Chemical analysis by flame atomic absorption spectrometry; Part 6 : Determination of chromium in contents from 0,01 to 2 % (m/m) |
| ISO 7668-1986 | 阳极氧化铝和铝合金.20°、45°、60°或85°角的镜面反射率和镜面光泽的测量 | Anodized aluminium and aluminium alloys; measurement of specular reflectance and specular gloss at angles of 20°, 45°, 60° or 85° |
| ISO 7689-1988 | 航空航天 强度等级1100 MPa、带MJ螺纹的合金钢螺栓 采购规范 | Aerospace; alloy steel bolts with strength classification 1100 MPa and MJ threads; procurement specification |
| ISO 7722-1985 | 重力铸造、砂型铸造、冷硬铸造或由有关工艺生产的铝合金铸件 验收和交货的一般条件 | Aluminium alloy castings produced by gravity, sand, or chill casting, or by related processes; General conditions for inspection and delivery |
| ISO 7755-1-1984 | 硬质合金去毛刺锉 第1部分:一般规范 | Hardmetal burrs; Part 1 : General specifications |
| ISO 7755-10-1984 | 硬质合金去毛刺锉 第10部分:锥形圆头锉(L型) | Hardmetal burrs; Part 10 : Conical round- (ball-) nose burrs (style L) |
| ISO 7755-11-1984 | 硬质合金去毛刺锉 第11部分:锥形尖头锉(M型) | Hardmetal burrs; Part 11 : Conical pointed-nose burrs (style M) |
| ISO 7755-12-1984 | 硬质合金去毛刺锉 第12部分:倒锥形锉(N型) | Hardmetal burrs; Part 12 : Inverted cone burrs (style N) |
| ISO 7755-2-1984 | 硬质合金去毛刺锉 第2部分:圆柱形锉(A型) | Hardmetal burrs; Part 2 : Cylindrical burrs (style A) |
| ISO 7755-3-1984 | 硬质合金去毛刺锉 第3部分:圆柱形圆头锉(C型) | Hardmetal burrs; Part 3 : Cylindrical round- (ball-) nose burrs (style C) |
| ISO 7755-4-1984 | 硬质合金去毛刺锉 第4部分:球形锉(D型) | Hardmetal burrs; Part 4 : Spherical burrs (style D) |
| ISO 7755-5-1984 | 硬质合金去毛刺锉 第5部分:椭圆形锉(E型) | Hardmetal burrs; Part 5: Oval burrs (style E) |
| ISO 7755-6-1984 | 硬质合金去毛刺锉 第6部分:弧形圆头锉(F型) | Hardmetal burrs; Part 6 : Arch round- (ball-) nose burrs (style F) |
| ISO 7755-7-1984 | 硬质合金去毛刺锉 第7部分:弧形尖头锉(G型) | Hardmetal burrs; Part 7: Arch pointed-nose burrs (style G) |
| ISO 7755-8-1984 | 硬质合金去毛刺锉 第8部分:火炬型锉(H型) | Hardmetal burrs; Part 8 : Flame burrs (style H) |
| ISO 7755-9-1984 | 硬质合金去毛刺锉 第9部分:60°和90°圆锥形锉(J和 K型) | Hardmetal burrs; Part 9 : 60 degrees and 90 degrees cone burrs (styles J and K) |
| ISO 7759-1983 | 铝和铝合金的阳极氧化 用遮光角度仪或角度仪测量铝表面的反射特性 | Anodizing of aluminium and its alloys; Measurement of reflectivity characteristics of aluminium surfaces using abridged goniophotometer or goniophotometer |
| ISO 7773-1983 | 镁合金 圆棒材和管材 尺寸偏差 | Magnesium alloys; Round bars and tubes; Dimensional tolerances |
| ISO 7787-2-2000 | 牙科旋转器械 切割刀具 第2部分:技工室用硬质合金刀具 | Dental rotary instruments - Cutters - Part 2: Carbide laboratory cutters |
| ISO 7787-3-1991 | 牙科旋转器械 切割工具 第3部分:技工室研磨机用硬质合金刀具 | Dental rotary instruments; cutters; part 3: carbide laboratory cutters for milling machines |
| ISO 7787-4-2002 | 牙科用旋转器械.切割刀具.第1部分:实验室用小型硬质合金刀具 | Dental rotary instruments - Cutters - Part 4: Miniature carbide laboratory cutters |
| ISO 7866-1999 | 气瓶 可重复充装的铝合金无缝气瓶 设计、结构和试验 | Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing |
| ISO 7900-2006 | 栏栅用钢丝和金属丝制品.锌和锌合金包覆的刺钢丝 | Steel wire and wire products for fences - Zinc- and zinc-alloy-coated steel barbed wire |
| ISO 791-1973 | 镁合金 铝含量的测定 8-羟基喹啉重量法 | Magnesium alloys; Determination of aluminium; 8-hydroxyquinoline gravimetric method |
| ISO 792-1973 | 镁和镁合金 铁含量的测定 邻菲啰啉光度法 | Magnesium and magnesium alloys; Determination of iron; Orthophenanthroline photometric method |
| ISO 793-1973 | 铝和铝合金 铁含量的测定 邻菲啰啉光度法 | Aluminium and aluminium alloys; Determination of iron; Orthophenanthroline photometric method |
| ISO 794-1976 | 镁和镁合金 铜含量的测定 草酰二酰肼光度法 | Magnesium and magnesium alloys; Determination of copper content; Oxalyldihydrazide photometric method |
| ISO 795-1976 | 铝和铝合金 铜含量的测定 草酰二酰肼光度法 | Aluminium and aluminium alloys; Determination of copper content; Oxalyldihydrazide photometric method |
| ISO 796-1973 | 铝合金 铜含量的测定 电解法 | Aluminium alloys; Determination of copper; Electrolytic method |
| ISO 797-1973 | 铝和铝合金 硅含量的测定 重量法 | Aluminium and aluminium alloys; Determination of silicon; Gravimetric method |
| ISO 7989-2-2007 | 钢丝和钢丝制品.钢丝的有色金属涂层.第2部分:锌或锌合金涂层 | Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc-alloy coating |
| ISO 8044-1999 | 金属与合金的腐蚀 基本术语和定义 三种语言版 | Corrosion of metals and alloys - Basic terms and definitions |
| ISO 8050-1988 | 镍铁合金锭或块 分析取样 | Ferronickel ingots or pieces; sampling for analysis |
| ISO 8078-1984 | 航空航天工艺 铝合金的阳极化处理 无着色涂层的硫酸工艺规程 | Aerospace process; Anodic treatment of aluminium alloys; Sulfuric acid process, undyed coating |
| ISO 8079-1984 | 航空航天工艺 铝合金的阳极化处理 带着色涂层的硫酸工艺规程 | Aerospace process; Anodic treatment of aluminium alloys; Sulfuric acid process, dyed coating |
| ISO 808-1973 | 铝和铝合金 硅含量的测定 钼蓝分光光度法 | Aluminium and aluminium alloys; Determination of silicon; Spectrophotometric method with the reduced silicomolybdic complex |
| ISO 8080-1985 | 航空航天 钛和钛合金的阳极化处理 硫酸工艺规程 | Aerospace; Anodic treatment of titanium and titanium alloys; Sulfuric acid process |
| ISO 8081-1985 | 航空航天工艺 铝合金的化学转化涂镀 一般用途 | Aerospace process; Chemical conversion coating for aluminium alloys; General purpose |
| ISO 809-1973 | 镁和镁合金 锰含量的测定 高碘酸盐光度法(锰含量为0.01%～0.8%) | Magnesium and magnesium alloys; Determination of manganese; Periodate photometric method (Manganese content between 0,01 and 0,8 %) |
| ISO 810-1973 | 镁和镁合金 锰含量的测定 高碘酸盐光度法(锰含量小于0.01%) | Magnesium and magnesium alloys; Determination of manganese; Periodate photometric method (Manganese content less than 0,01 %) |
| ISO 8251-1987 | 阳极氧化铝和铝合金 用摩擦轮磨耗试验机测定阳极氧化膜磨性和耐磨系数 | Anodized aluminium and aluminium alloys; Measurement of wear resistance and wear index of anodic oxidation coatings with an abrasive wheel wear test apparatus |
| ISO 8252-1987 | 阳极氧化铝和铝合金 用喷砂摩擦试验仪测定阳极氧化膜的平均耐磨系数 | Anodized aluminium and aluminium alloys; Measurement of mean specific abrasion resistance of anodic oxidation coatings with an abrasive jet test apparatus |
| ISO 8282-1994 | 牙科设备 汞及合金混合器和调和器 | Dental equipment - Mercury and alloy mixers and dispensers |
| ISO 8287-2000 | 镁和镁合金 纯镁 化学成分 | Magnesium and magnesium alloys - Unalloyed magnesium - Chemical composition |
| ISO 8407-1991 | 金属与合金的腐蚀 腐蚀试样中腐蚀生成物的清除 | Corrosion of metals and alloys; removal of corrosion products from corrosion test specimens |
| ISO 8442-7-2000 | 与食品接触的材料和制品 刀具和凹形餐具 第7部分:银、其他贵金属及其合金制餐刀的要求 | Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 7: Requirements for table cutlery made of silver, other precious metals and their alloys |
| ISO 8458-2-2002 | 机械弹簧用钢丝.第2部分:铅淬冷拔非合金钢丝 | Steel wire for mechanical springs - Part 2: Patented cold-drawn non-alloy steel wire |
| ISO 8565-1992 | 金属与合金 大气腐蚀试验 野外试验的一般要求 | Metals and alloys; atmospheric corrosion testing; general requirements for field tests |
| ISO 8591-1-1989 | 航空航天 锻铝和铝合金 检验、试验和供货要求 第1部分:一般要求 | Aerospace; wrought aluminium and aluminium alloys; inspection, testing and supply requirements; part 1: general requirements |
| ISO 8644-2006 | 摩托车.轻质合金钢轮.试验方法 | Motorcycles - Light-alloy wheels - Test method |
| ISO 8645-1988 | 轻便摩托车 轻合金轮 试验方法 | Mopeds; light-alloy wheels; test method |
| ISO 8654-1987 | 金合金颜色 定义、颜色范围和标记 | Colours of gold alloys; Definition, range of colours and designation |
| ISO 883-1985 | 无固定孔的修圆角的可转位硬质合金(碳化)刀片 尺寸 | Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole; Dimensions |
| ISO 886-1973 | 铝和铝合金 锰含量的测定 光度法(锰含量为0.005～1.5%) | Aluminium and aluminium alloys; Determination of manganese; Photometric method (Manganese content between 0,005 and 1,5 %) |
| ISO 8954-1-1990 | 铁合金 词汇 第1部分:材料 三种语言版 | Ferroalloys; vocabulary; part 1: materials |
| ISO 8954-2-1990 | 铁合金 词汇 第2部分:取样和样品的制备 三种语言版 | Ferroalloys; vocabulary; part 2: sampling and sample preparation |
| ISO 8954-3-1990 | 铁合金 词汇 第3部分:筛分 三种语言版 | Ferroalloys; vocabulary; part 3: sieve analysis |
| ISO 8993-1989 | 阳极氧化铝和铝合金 点腐蚀法评定铝及铝合金阳极氧化膜 图表法 | Anodized aluminium and aluminium alloys; rating system for the evaluation of pitting corrosion; chart method |
| ISO 8994-1989 | 阳极氧化铝和铝合金 点腐蚀法评定铝及铝合金阳极氧化膜 网格法 | Anodized aluminium and aluminium alloys; rating system for the evaluation of pitting corrosion; grid method |
| ISO 9152-1998 | 航空航天 强度等级为1100 MPa的钛合金MJ螺纹螺栓 采购规范 | Aerospace - Bolts, with MJ threads, in titanium alloys, strength class 1100 MPa - Procurement specification |
| ISO 9154-1999 | 航空航天 由强度等级为1550 MPa的耐热镍基合金制成的带MJ螺纹的螺栓 采购规范 | Aerospace - Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1550 MPa - Procurement specification |
| ISO 9202-1991 | 首饰 贵金属合金纯度 | Jewellery; fineness of precious metal alloys |
| ISO 9216-2002 | 航空航天.滑轮用合金钢和镀镉或耐腐蚀钢和钝化六角带槽(齿形头)螺母.尺寸和质量 | Aerospace - Nuts, hexagonal, slotted (castellated), for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated - Dimensions and masses |
| ISO 9217-2002 | 航空航天.滑轮用合金钢和镀镉或耐腐蚀钢和钝化带埋头孔的倒角垫圈.尺寸和质量 | Aerospace - Washers, chamfered, with counterbore, for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated - Dimensions and masses |
| ISO 9218-2002 | 航空航天.滑轮用合金钢和镀镉或耐腐蚀钢和钝化平垫圈.尺寸和质量 | Aerospace - Washers, flat, for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated - Dimensions and masses |
| ISO 9219-2002 | 航空航天.滑轮用合金钢和镀镉或钛合金钢、MoS<下标2>润滑或耐腐蚀钢和钝化的紧公差柄、短螺纹薄六角头螺栓. | Aerospace - Bolts, thin hexagonal head, for pulleys, close tolerance shank, short thread, in alloy steel and cadmium-plated or in titanium alloy steel, MoS<(Index)2> lubricated or in corrosion-resistant steel and passivated - Dimensions and masses |
| ISO 9223-1992 | 金属与合金的腐蚀 大气腐蚀性 分类 | Corrosion of metals and alloys; corrosivity of atmospheres; classification |
| ISO 9224-1992 | 金属与合金的腐蚀 大气腐蚀性 腐蚀等级的指导值 | Corrosion of metals and alloys; corrosivity of atmospheres; guiding values for the corrosivity categories |
| ISO 9225-1992 | 金属与合金的腐蚀 大气腐蚀性 污染测量 | Corrosion of metals and alloys; corrosivity of atmospheres; measurement of pollution |
| ISO 9226-1992 | 金属与合金的腐蚀 大气腐蚀性 评估腐蚀性用对标准样品的腐蚀率的测定 | Corrosion of metals and alloys; corrosivity of atmospheres; determination of corrosion rate of standard specimens for the evaluation of corrosivity |
| ISO 9327-2-1999 | 压力用途的钢锻件和轧制或锻造的棒材 交货技术条件 第2部分:具有规定的高温度特性的非合金和合金钢(钼、镉 | Steel forgings and rolled or forged bars for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy (Mo, Cr and CrMo) steels with specified elevated temperature properties |
| ISO 9328-2-2004 | 压力用途的扁钢制品.交货技术条件.第2部分:规定了高温性能的非合金和合金钢 | Steel flat products for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
| ISO 9328-4-2004 | 压力用途扁钢产品.交货技术条件.第4部分:规定了低温性能的镍合金钢 | Steel flat products for pressure purposes - Technical delivery conditions - Part 4: Nickel-alloy steels with specified low temperature properties |
| ISO 9329-1-1989 | 压力用途的无缝钢管 交货技术条件 第1部分:规定室温性能的非合金钢 | Seamless steel tubes for pressure purposes; technical delivery conditions; part 1: unalloyed steels with specified room temperature properties |
| ISO 9329-2-1997 | 压力用途的无缝钢管 交货技术条件 第2部分:规定高温性能的非合金钢和合金钢 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Unalloyed and alloyed steels with specified elevated temperature properties |
| ISO 9329-3-1997 | 压力用途的无缝钢管 交货技术条件 第3部分:规定低温性能的非合金钢和合金钢 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Unalloyed and alloyed steels with specified low temperature properties |
| ISO 9330-1-1990 | 压力用途的焊接钢管 交货技术条件 第1部分:规定室温性能的非合金钢管 | Welded steel tubes for pressure purposes; technical delivery conditions; part 1: unalloyed steel tubes with specified room temperatures properties |
| ISO 9330-2-1997 | 压力用途的焊接钢管 交货技术条件 第2部分:规定高温性能的电阻焊接和感应焊接非合金钢管和合金钢管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties |
| ISO 9330-3-1997 | 压力用途的焊接钢管 交货技术条件 第3部分:规定低温性能的电阻焊接和感应焊接非合金钢管和合金钢管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties |
| ISO 9330-4-2000 | 压力用途的焊接钢管 交货技术条件 第4部分:规定高温性能的埋弧焊接非合金钢管和合金钢管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties |
| ISO 9330-5-2000 | 压力用途的焊接钢管 交货技术条件 第5部分:规定低温性能的埋弧焊接非合金钢管和合金钢管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties |
| ISO 9388-1992 | 镍合金 磷含量测定 钼蓝分子吸收光谱法 | Nickel alloys; determination of phosphorus content; molybdenum blue molecular absorption spectrometric method |
| ISO 9400-1990 | 镍基合金 抗晶间腐蚀性的测定 | Nickel-based alloys; determination of resistance to intergranular corrosion |
| ISO 9418-1998 | 航空航天 铝或铝合金实心铆钉 采购规范 | Aerospace - Rivets, solid, in aluminium or aluminium alloys - Procurement specification |
| ISO 9443-1991 | 热处理和合金钢 热轧棒材和线材的表面质量等级 交货技术条件 | Heat-treatable and alloy steels; surface quality classes for hot-rolled round bars and wire rods; technical delivery conditions |
| ISO 9453-2006 | 软钎料合金.化学成分和形式 | Soft solder alloys - Chemical compositions and forms |
| ISO 9591-2004 | 铝合金的腐蚀.抗应力腐蚀裂纹的测定 | Corrosion of aluminium alloys - Determination of resistance to stress corrosion cracking |
| ISO 9606-2-2004 | 焊工的认可试验.熔焊.第2部分:铝和铝合金 | Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys |
| ISO 9606-3-1999 | 焊工的认可试验 熔焊 第3部分:铜及铜合金 | Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys |
| ISO 9606-4-1999 | 焊工的认可试验 熔焊 第4部分:镍及镍合金 | Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys |
| ISO 9606-5-2000 | 焊工的认可试验 熔焊 第5部分:钛及钛合金、锆和锆合金 | Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys |
| ISO 9692-3-2000 | 焊接和相关工艺 接头制备的建议 第3部分:铝及铝合金的金属焊条惰性气体保护焊和钨焊条惰性气体保护焊 | Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys |
| ISO 9722-1992 | 镍和镍合金 加工产品的成分与形状 | Nickel and nickel alloys; composition and forms of wrought products |
| ISO 9723-1992 | 镍和镍合金棒材 | Nickel and nickel alloy bars |
| ISO 9724-1992 | 镍和镍合金线材以及拔丝原料 | Nickel and nickel alloy wire and drawing stock |
| ISO 9725-1992 | 镍和镍合金锻件 | Nickel and nickel alloy forgings |
| ISO 9915-1992 | 铝合金铸件 X射线照相试验 | Aluminium alloy castings; radiography testing |
| ISO 9916-1991 | 铝合金和镁合金铸件 液体渗透检验 | Aluminium alloy and magnesium alloy castings; liquid penetrant inspection |
| ISO 9950-1995 | 工业淬火油 冷却特性的测定 镍合金探测试验法 | Industrial quenching oils - Determination of cooling characteristics - Nickel-alloy probe test method |
| ISO 9975-1990 | 封闭缠绕矿用非合金钢丝绳 规范 | Round non-alloy steel wires for locked coil mine winding ropes; specifications |
| ISO/TR 11434-1992 | 镍合金 铌和钽的测定 离子交换法 | Nickel alloys; determination of niobium and tantalum; ion exchange method |
| ISO/TR 11728-1993 | 阳极氧化铝和铝合金 使用循环的人工灯和污染空气测定着色阳极氧化膜色牢度的加速耐候试验 | Anodized aluminium and aluminium alloys; accelerated test of weather fastness of coloured anodic oxide coatings using cyclic artificial light and pollution gas |
| ISO/TR 15349-1-1998 | 非合金钢 低碳含量的测定 第1部分:电阻炉燃烧后的红外线吸收法(脉冲间距) | Unalloyed steel - Determination of low carbon content - Part 1: Infrared absorption method after combustion in an electric resistance furnace (by peak separation) |
| ISO/TR 15349-3-1998 | 非合金钢 低碳含量的测定 第3部分:电阻炉(预热的)燃烧后的红外线吸收法 | Unalloyed steel - Determination of low carbon content - Part 3: Infrared absorption method after combustion in an electric resistance furnace (with preheating) |
| ISO/TR 17671-4-2002 | 焊接.金属材料焊接的推荐.第4部分:铝和铝合金的电弧焊接 | Welding - Recommendations for welding of metallic materials - Part 4: Arc welding of aluminium and aluminium alloys |
| ISO/TR 7242-1981 | 轻金属和铝合金的化学分析 实验室间的试验结果的统计分析 | Chemical analysis of light metals and their alloys; Statistical interpretation of inter-laboratory trials |
| ISO/TR 8125-1984 | 铝和铝合金的阳极氧化 着色阳极氧化膜的颜色和色差的测定 | Anodizing of aluminium and its alloys; Determination of colour and colour difference of coloured anodic coatings |
| ISO/TR 9721-1992 | 镍和镍合金 材料的牌号表示方法 | Nickel and nickel alloys; rules for material description based on chemical symbols |
| ISO/TS 13899-1-2004 | 钢.合金钢中钼、铌和钨含量的测定.感应耦合等离子原子发射光谱法.第1部分:钼含量的测定 | Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductively coupled plasma atomic emission spectrometric method - Part 1: Determination of Mo content |
| ISO/TS 13899-3-2005 | 钢.合金钢中钼、铌和钨含量的测定.感应耦合等离子体原子发射光谱法.第3部分:钨含量的测定 | Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductively coupled plasma atomic emission spectrometric method - Part 3: Determination of W content |
| ISO/TS 17576-2004 | 牙科学.汞齐合金的腐蚀试验 | Dentistry - Corrosion tests for amalgam |
| 编号 | 中文名称 | 英文名称 |