美国合金标准(ANSI alloy standards)

美国合金标准(ANSI alloy standards)

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF |  DIC
编号 中文名称 英文名称
ANSI B16.18-2001 铸铜合金焊锡连接压力配件 Cast Copper Alloy Solder Joint Pressure Fittings
ANSI B212.1-2002 硬质合金坯料、钎焊和实心单点工具 Carbide Blanks, Brazed and Solid Single-Point Tools
ANSI B212.14-2002 销锁扣型固定器用带转位刀片的硬质合金座 Carbide Seats Used with Indexable Inserts for Pin Lock-Type Holders
ANSI B212.15-1994 切削工具.硬质合金镶嵌钻头的砖砌体钻及其砖砌体钻的毛坯 Cutting tools - Carbide-tipped masonry drills and blanks for carbide-tipped masonry drills
ANSI B212.16-2000 切削工具.硬质合金圆头锉坯料 Cutting Tools - Blanks for Carbide Burs
ANSI B212.2-1984 切削工具.夹紧型刀柄夹持器用的带可转位镶嵌刀片的硬质合金刀座 Cutting Tools - Carbide Seats Used with Indexable Inserts for Clamp-Type Holders
ANSI B212.7-1993 切削工具.硬质合金工具工业中使用的螺纹紧固件 Cutting tools - Threaded fasteners used in the carbide tooling industry
ANSI B212.8-2002 切削工具.麻花钻、铰刀、端铣刀和任选钻杆用硬质合金坯料 Cutting Tools - Carbide Blanks for Twist Drills, Reamers, End Mills, and Random Rod
ANSI B212.9-1994 可倾斜圆盘锯用硬质合金坯料 Carbide Blanks for Tipping Circular Saws
ANSI B94.47M-1980 夹紧式刀具夹持器用的与可转位刀片一起使用的硬质合金断屑器 Carbide chip breakers used with indexable inserts for clamp type holders
ANSI H35.1/H 35.1M-2006 铝材的美国国家标准合金和回火名称与符号注册系统 American National Standard Alloy and Temper Designation Systems for Aluminum
ANSI H35.4-2006 非合金铝的命名与符号系统 Designation System for Unalloyed Aluminum
ANSI/AAMI/ISO 10993-15-2000 医疗器械的生物学评价.第15部分:金属与合金降解产物的识别与定量 Biological Evaluation of Medical Devices - Part 15: Identification and Quantification of Degradation Products from Metals and Alloys
ANSI/ADA 1-2003 汞齐和牙科汞用合金 Alloy for Amalgam and Dental Mercury
ANSI/ADA 109-2006 存放牙科汞合金废料法和汞合金废料储存/船载集装箱要求 Procedures for Storing Dental Amalgam Waste and Requirements for Amalgam Waste Storage/Shipment Containers
ANSI/ADA 14-1982 牙科用铬钴铸造合金 Casting Alloy, Dental Chromium-Cobalt
ANSI/ADA 2-2002 牙科金合金用石膏粘结铸造精密模 Gypsum-Bonded Casting Investment for Dental Gold Alloy
ANSI/ADA 5-1997 牙科铸模合金 Dental Casting Alloys
ANSI/ADA 88-2000 牙科用青铜合金 Dental Brazing Alloys
ANSI/API RP578-1999 新的和原有合金管系统的材料检定程序 Material Verification Program for New and Existing Alloy Piping Systems
ANSI/ASME B16.22-2001 锻铜和铜合金钎焊接压力连接件 Wrought Copper and Copper Alloy Solder-Joint Pressure Fittings
ANSI/ASME B16.23-2002 DWV铸铜合金钎焊连接排水配件 Cast Copper Alloy Solder Joint Drainage Fittings: DWV
ANSI/ASME B16.24-2006 铸铜合金管法兰和法兰配件:等级150、300、600、900、1500和2500 Cast Copper Alloy Pipe Flanges and Flanged Fittings: Classes 150, 300, 600, 900, 1500, and 2500
ANSI/ASME B16.26-2006 青铜扩口管用铸铜合金配件 Cast Copper Alloy Fittings for Flared Copper Tubes
ANSI/ASME B16.29-2007 DWV型锻铜和锻铜合金钎焊排水配件 Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings - DWV
ANSI/ASME B16.50-2001 锻造铜及铜合金钎焊承压配件 Wrought Copper and Copper Alloy Braze-Joint Pressure Fittings
ANSI/ASTM A1018-2001 片钢和带钢、厚卷材、热轧、高强度低合金结构碳钢以及改良可模塑高强度钶或钒低合金钢规范 Specification for Steel, Sheet and Strip, Heavy Thickness Coils, Hot Rolled, Carbon, Structural, High-Strength Low-Alloy, Columbium or Vanadium, and High-Strength Low-Alloy With Improved Formability
ANSI/ASTM A182/A 182M-2001 高温设备用锻制或轧制合金钢管法兰、锻制管件、阀门及零件规范 Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
ANSI/ASTM A193/A 193M-2001 高温设备用合金钢和不锈钢螺栓材料规范 Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service
ANSI/ASTM A194/A 194M-2001 高压和高温设备用碳素钢与合金钢螺栓和螺母规范 Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure and High-Temperature Service
ANSI/ASTM A213/A 213M-2001 锅炉、过热器和热交换器用无缝铁素体和奥氏体合金钢管规范 Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
ANSI/ASTM A265-1994 镍及镍基合金复合钢板规范 Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate
ANSI/ASTM A320/A 320M-2001 低温设备用合金钢螺栓材料规范 Specification for Alloy-Steel Bolting Materials for Low-Temperature Service
ANSI/ASTM A427-1996 冷轧和热轧用锻制合金钢辊规范 Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction
ANSI/ASTM A450-1996 碳素钢管、铁素体合金钢管及奥氏体合金钢管规范 Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes
ANSI/ASTM A494/A 494M-2001 镍和镍合金铸件规范 Specification for Castings, Nickel and Nickel Alloy
ANSI/ASTM A608-1991 高温承压设备用离心铸造铁铬镍高合金钢管规范 Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
ANSI/ASTM A668-1996 工业用普通碳素钢和合金钢锻件规范 Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
ANSI/ASTM A709/A 709M-2001 桥梁用碳素钢和高强度低合金结构型钢、钢板、钢棒及调质合金结构钢棒规范 Specification for Carbon and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and Quenched-and-Tempered Alloy Structural Steel Plates for Bridges
ANSI/ASTM A712-1997 软磁性合金电阻率测试方法 Test Method for Electrical Resistivity of Soft Magnetic Alloys
ANSI/ASTM A743/A 743M-1998 普通耐腐蚀铬铁及镍铬铁合金铸件规范 Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion-Resistant, for General Application
ANSI/ASTM A753-1997 镍铁软磁合金规范 Specification for Nickel-Iron Soft Magnetic Alloys
ANSI/ASTM A768-1996 涡轮机转子及轴用经真空处理的12/T%铬合金钢锻件规范 Specification for Vacuum-Treated 12/T% Chromium Alloy Steel Forgings for Turbine Rotors and Shafts
ANSI/ASTM A801/A 801M-1999 铁钴高磁性饱和合金规范 Specification for Iron-Cobalt High Magnetic Saturation Alloys
ANSI/ASTM A837-1996 渗碳合金钢锻件规范 Specification for Steel Forgings, Alloy, for Carburizing Applications
ANSI/ASTM A838-1997 继电器用易切铁素体不锈软磁合金规范 Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloys for Relay Applications
ANSI/ASTM A901-1997 半成品型非晶磁芯合金规范 Specification for Amorphous Magnetic Core Alloys Semi-Processed Types
ANSI/ASTM A904-1998 50镍-50铁粉末冶金(P/M)软磁合金规范 Specification for 50 Nickel-50 Iron Powder Metallurgy (P/M) Soft Magnetic Alloys
ANSI/ASTM A940-1996 涡轮转子用差温热处理真空处理钢锻件、合金规范 Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors
ANSI/ASTM B102-2000 铅和锡合金压模铸件规范 Specification for Lead and Tin Alloy Die Castings
ANSI/ASTM B127-1993 镍铜合金(UNS N04400)板、薄板和带材规范 Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip
ANSI/ASTM B163-2001 无缝镍和镍合金冷凝和热交换管规范 Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
ANSI/ASTM B164-1993 镍铜合金条材、棒材和线材规范 Specification for Nickel-Copper Alloy Rod, Bar, and Wire
ANSI/ASTM B165-1996 无缝镍铜合金(UNS N04400)管规范 Specification for Nickel-Copper Alloy (UNS N04400) Seamless Pipe and Tube
ANSI/ASTM B166-2001 镍铬铁合金(UNS N06600, N06601, and N06690)及镍铬钴钼合金(UNS N06617)条材、棒材及线材规范 Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, and N06690) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Rod, Bar, and Wire
ANSI/ASTM B167-2001 无缝镍铬铁合金(UNS N06600, N06601, and N06690)管规范 Specification for Nickel-Chromium-Iron Alloy (UNS N06600, N06601, and N06690) Seamless Pipe and Tube
ANSI/ASTM B168-2001 镍铬铁合金(UNS N06600, N06601 and N06690)及镍铬钴钼合金(UNS N06617)板、薄板和带材规范 Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601 and N06690) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Plate, Sheet, And Strip
ANSI/ASTM B240-2001 压模铸锭中锌合金规范 Specification for Zinc Alloys in Ingot Form for Die Castings
ANSI/ASTM B327-2001 锌压模铸造合金的主要合金规范 Specification for Master Alloys Used in Making Zinc Die Casting Alloys
ANSI/ASTM B333-1998 镍钼合金板、薄板和带材规范 Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip
ANSI/ASTM B335-1998 铌钼合金棒材规范 Specification for Nickel-Molybdenum Alloy Rod
ANSI/ASTM B344-2002 电气加热元件用拉制或轧制镍-铬合金及镍-铬-铁合金规范 Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements
ANSI/ASTM B366-2001 工厂锻压镍和镍合金配件规范 Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings
ANSI/ASTM B407-1996 镍铁铬合金无缝管规范 Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
ANSI/ASTM B408-1996 镍铁铬合金杆材和棒材规范 Specification for Nickel-Iron-Chromium Alloy Rod and Bar
ANSI/ASTM B409-1996 镍铁铬合金板材、薄板材和带材规范 Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip
ANSI/ASTM B423-1999 镍铁铬钼铜合金(UNS N08825 and UNS N08221)无缝管规范 Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and UNS N08221) Seamless Pipe and Tube
ANSI/ASTM B424-1998 镍铁铬钼铜合金(UNS N08825 and N08221)板、薄板及带材规范 Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and N08221) Plate, Sheet, and Strip
ANSI/ASTM B425-1999 镍铁铬钼铜合金(UNS N08825 and UNS N08221)杆材和棒材规范 Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and N08221) Rod and Bar
ANSI/ASTM B434-2000 镍钼铬铁合金(UNS N10003)板、薄板和带材规范 Specification for Nickel-Molybdenum-Chromium-Iron Alloy (UNS N10003) Plate, Sheet, and Strip
ANSI/ASTM B443-2000 镍铬钼钶合金(UNS N06625)板、薄板和带材规范 Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) Plate, Sheet, and Strip
ANSI/ASTM B444-2000 镍铬钼钶合金(UNS N06625)管规范 Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) Pipe and Tube
ANSI/ASTM B446-2000 镍铬钼钶合金(UNS N06625)条材和棒材规范 Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) Rod and Bar
ANSI/ASTM B464-1999 UNS NO8020、UNS NO8024和UNS NO8026合金焊管规范 Specification for Welded UNS N08020, UNS N08024, and UNS N08026 Alloy Pipe
ANSI/ASTM B468-1999 UNS NO8020、UNS NO8024和UNS NO8026合金焊管规范 Specification for Welded UNS N08020, UNS N08024, and UNS N08026 Alloy Tubes
ANSI/ASTM B471-1996 UNS NO8020、UNS NO8026和UNS NO8024镍合金弹簧丝规范 Specification for UNS N08020, UNS N08026, and UNS N08024 Nickel Alloy Spring Wire
ANSI/ASTM B473-1996 UNS NO8020、UNS NO8026及UNS NO8024镍合金棒材和线材规范 Specification for UNS N08020, UNS N08026, and UNS N08024 Nickel Alloy Bar and Wire
ANSI/ASTM B474-1999 UNS NO8020、UNS NO8026和UNS NO8024镍合金电熔焊管规范 Specification for Electric Fusion Welded UNS N08020, UNS N08026, and UNS N08024 Nickle Alloy Pipe
ANSI/ASTM B512-1999 镍铬硅合金(UNS N08330)坯料和棒材规范 Specification for Nickel-Chromium-Silicon Alloy (UNS N08330) Billets and Bars
ANSI/ASTM B514-1996 镍铁铬合金焊管规范 Specification for Welded Nickel-Iron-Chromium Alloy Pipe
ANSI/ASTM B515-1996 UNS NO8800、UNS N08810和UNS NO8811合金焊管规范 Specification for Welded UNS N08800, UNS N08810, and UNS N08811 Alloy Tubes
ANSI/ASTM B516-1998 镍铬铁合金(UNS N06600) UNS N06025 and UNS N06045焊管规范 Specification for Welded Nickel-Chromium-Iron Alloy (UNS N06600) UNS N06025 and UNS N06045 Tubes
ANSI/ASTM B517-1998 镍铬铁合金(UNS N06600) UNS N06025 and N06045焊管试验方法 Test Method for Welded Nickel-Chromium-Iron-Alloy (UNS N06600) UNS N06025 and N06045 Pipe
ANSI/ASTM B522-2001 金银铂电触点合金规范 Specification for Gold-Silver-Platinum Electrical Contact Alloy
ANSI/ASTM B535-1999 镍铁铬硅合金(UNS N08330 and UNS N08332)无缝管规范 Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and UNS N08332) Seamless Pipe
ANSI/ASTM B536-1996 镍铁铬硅合金板材、薄板材及带材规范 Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip
ANSI/ASTM B541-2001 金电触点合金规范 Specification for Gold Electrical Contact Alloy
ANSI/ASTM B546-1998 电熔焊接镍铬钶钼合金(UNS N06617)、镍铁铬硅合金(UNS N08330 and UNS N08332)、 镍铬铁合金(UNS N06025)和 Specification for Electric-Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe
ANSI/ASTM B563-2001 钯银铜电触点合金规范 Specification for Palladium-Silver-Copper Electrical Contact Alloy
ANSI/ASTM B573-2000 镍钼铬铁合金(UNS N10003)棒材规范 Specification for Nickel-Molybdenum-Chromium-Iron Alloy (UNS N10003) Rod
ANSI/ASTM B574-1999 低碳镍钼铬,低碳镍铬钼和低碳镍铬钼钨合金棒规范 Specification for Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Chromium-Molybdenum and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod
ANSI/ASTM B575-1999 低碳镍钼铬和低碳镍铬钼合金板、薄板及带材规范 Specification for Low-Carbon Nickel-Molybdenum-Chromium and Low-Carbon Nickel-Chromium-Molybdenum Alloy Plate, Sheet, and Strip
ANSI/ASTM B581-1997 镍铬铁钼铜合金棒规范 Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod
ANSI/ASTM B582-1996 镍铬铁钼铜合金板材、薄板材及带材规范 Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip
ANSI/ASTM B603-2001 电加热元件的拉伸或辊轧铁铬铝合金规范 Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements
ANSI/ASTM B619-2000 焊接用镍和镍钴合金管规范 Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe
ANSI/ASTM B621-1996 镍铁铬钼合金(UNS N08320)棒材规范 Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod
ANSI/ASTM B622-2000 无缝镍和镍钴合金管规范 Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube
ANSI/ASTM B626-2001 焊接镍和镍钴合金管规范 Specification for Welded Nickel and Nickel-Cobalt Alloy Tube
ANSI/ASTM B637-1998 高温工作沉淀硬化镍合金棒材、锻件及锻坯规范 Specification for Precipitation Hardening Nickel Alloy Bars, Forgings, and Forging Stock for High-Temperature Service
ANSI/ASTM B639-1996 高温设备用沉积硬化含钴合金杆材、棒材、锻件和锻造坯料规范 Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service
ANSI/ASTM B649-1996 镍铁铬钼铜低碳合金(UNS N08904)、镍铁铬钼铜氮低碳合金(UNS N08925,UNS N08031和UNS N08926)和铬镍铁氮低 Specification for Ni-Fe-Cr-Mo-Cu Low-Carbon Alloy (UNS N08904) and Ni-Fe-Cr-Mo-Cu-N Low Carbon Alloys (UNS 08925, UNS N08031, and UNS N08925) Cr-Ni-Fe-N Low Carbon (UNS R20033)
ANSI/ASTM B663-1994 银钨硬质合金电触点材料规范 Specification for Silver-Tungsten Carbide Electrical Contact Material
ANSI/ASTM B669-1997 锻造及压模铸用锌铝合金铸锭规范 Specification for Zinc-Aluminum Alloys in Ingot Form for Foundry and Die Castings
ANSI/ASTM B670-1996 高温设备用沉淀硬化镍合金板材、薄板材及带材规范 Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service
ANSI/ASTM B672-1996 稳定的镍铁铬钼铌合金棒材及线材规范 Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire
ANSI/ASTM B690-1996 铁镍铬钼合金(UNS N08366 and UNS No8367)无缝管规范 Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS No8367) Seamless Pipe and Tube
ANSI/ASTM B691-1996 铁镍铬钼合金(UNS N08366 And UNS N08367)条材、棒材及线材规范 Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 And UNS N08367) Rod, Bar, and Wire
ANSI/ASTM B704-2000 UNS NO6625和UNS NO8825合金焊管规范 Specification for Welded UNS N06625 and UNS N08825 Alloy Tubes
ANSI/ASTM B705-2000 镍合金焊接管规范 Specification for Nickel-Alloy (UNS N06625 and N08825) Welded Pipe
ANSI/ASTM B709-1998 铁镍铬钼合金(UNS No8028)板材、薄板和带材 Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS No8028) Plate, Sheet, and Strip
ANSI/ASTM B710-1999 镍铁铬硅合金焊接管规范 Specification for Nickel-Iron-Chromium Silicon-Alloy Welded Pipe
ANSI/ASTM B719-2000 镍铬钼钴钨铁硅合金(UNS N06333)棒材规范 Specification for Nickel-Chromium-Molybdenum-Cobalt- Tungsten-Iron-Silicon Alloy (UNS N06333) Bar
ANSI/ASTM B722-1995 镍铬钼钴钨铁硅合金(UNS N06333)无缝管规范 Specification for Nickel-Chromium-Molybdenum-Colbalt- Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube
ANSI/ASTM B725-1996 焊接镍(UNS N02200/UNS No2201)和镍铜合金(UNS N04400)管规范 Specification for Welded Nickel (UNS N02200/UNS No2201) and Nickel-Copper Alloy (UNS N04400) Pipe
ANSI/ASTM B726-1996 镍铬钼钴钨铁硅合金 (UNS N06333)焊管规范 Specification for Nickel-Chromium-Molybdenum-Colbalt- Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube
ANSI/ASTM B730-1996 焊接镍和镍铜合金管(UNS N04400)规范 Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Tube
ANSI/ASTM B739-1998 钼铁铬硅合金焊管规范 Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Tube
ANSI/ASTM B749-1996 铅和铅合金带材、薄板材和板材产品规范 Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products
ANSI/ASTM B750-1999 热浸涂层锌5%铝混合稀土合金(UNS Z38510)铸锭规范 Specification for Zinc-5 % Aluminum-Mischmetal Alloy (UNS Z38510) in Ingot Form for Hot-Dip Coatings
ANSI/ASTM B751-1999 镍和镍合金无缝和焊管规范 Specification for General Requirements for Nickel and Nickel Alloy Seamless and Welded Tube
ANSI/ASTM B753-2001 恒温组份合金规范 Specification for Thermostat Component Alloys
ANSI/ASTM B76-2001 电加热用镍铬和镍铬铁合金加速寿命试验方法 Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating
ANSI/ASTM B77-2001 电阻合金的热电动力试验方法 Test Method for Thermoelectric Power of Electrical-Resistance Alloys
ANSI/ASTM B775-2000 镍和镍合金无缝和焊管规范 Specification for General Requirements for Nickel and Nickel Alloy Seamless and Welded Pipe
ANSI/ASTM B78-2001 铁镍铝合金电加热加速寿命试验方法 Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
ANSI/ASTM B791-1997 锌铝合金铸造和压模铸件规范 Specification for Zinc-Aluminum (Za) Alloy Foundry and Die Castings
ANSI/ASTM B792-2001 空壳铸造铸锭锌合金规范 Specification for Zinc Alloys in Ingot Form for Slush Casting
ANSI/ASTM B793-2001 塑料注模和压模铸造锌铸造合金锭规范 Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
ANSI/ASTM B805-1996 UNS N07716、N07725和N09777沉淀硬化镍合金钢棒和钢丝规范 Specification for Precipitation Hardening Nickel Alloys UNS N07716, N07725 and N09777 Bar and Wire
ANSI/ASTM B814-1996 镍铬铁钼钨合金板材、薄板材和带材规范 Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet, and Strip
ANSI/ASTM B815-1996 钴铬镍钼钨合金杆规范 Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod
ANSI/ASTM B818-1998 钴铬镍钼钨合金(UNS R31233)板,薄板和带材规范 Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate, Sheet and Strip
ANSI/ASTM B829-1999 镍和镍合金无缝管一般要求规范 Specification for General Requirements for Nickel And Nickel Alloy Seamless Pipe and Tube
ANSI/ASTM B834-1996 压力强化粉末冶金铁镍铬钼和镍铬钼钶(Nb)合金管法兰、管配件、阀门和零件规范 Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves and Parts
ANSI/ASTM B84-2001 精密电阻器合金电阻丝耐温常数测试方法 Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
ANSI/ASTM B852-2001 薄钢板连续热浸镀锌用锌合金规范 Specification for Zinc Alloys (Cgg) for Continuous Hot-Dip Galvanizing of Sheet Steel
ANSI/ASTM B86-1998 锌合金压模铸件规范 Specification for Zinc-Alloy Die Castings
ANSI/ASTM B860-2001 热浸镀锌用锌母合金规范 Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing
ANSI/ASTM B865-1996 沉淀硬化镍铜铝合金(UNS N05500)棒材、杆材、线材、锻件和锻坯规范 Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock
ANSI/ASTM B872-1996 沉淀硬化镍铁铬钴(Nb)钛铝合金(UNS N09908)板、薄板及带材规范 Specification for Precipitation-Hardening Nickel-Iron-Chromium-Columbium (NB)-Titanium-Aluminum Alloy (UNS NO9908) Plate, Sheet and Strip
ANSI/ASTM B880-1998 镍、镍合金及钴合金化学检验分析限值一般要求规范 Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys
ANSI/ASTM B894-1999 锌铜铝合金压模铸件规范 Specification for Zinc-Copper-Aluminum Alloy Die Castings
ANSI/ASTM B897-1999 锌及锌合金特大铸锭规范 Specification for Zinc and Zinc Alloy Jumbo Ingot
ANSI/ASTM B899-2001 有色金属和合金术语 Terminology Relating to Non-Ferrous Metals and Alloys
ANSI/ASTM B906-2000 平轧镍和镍合金板材、薄板材和带材的一般要求规范 Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet and Strip
ANSI/ASTM B908-2000 锌合金铸锭色码使用惯例 Practice for Use of Color Codes for Zinc Casting Alloy Ingot
ANSI/ASTM B914-2000 钢热浸镀锌用锌和锌合金铸锭颜色编码惯例 Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel
ANSI/ASTM D3115-1995 在高剪切力作用下润滑剂对宇航合金的爆炸反应性的试验方法(05.02) Explosive Reactivity of Lubricants with Aerospace Alloys under High Shear, Method of Test for (05.02)
ANSI/ASTM D4340-1998 排热条件下发动机冷却剂铸造铝合金腐蚀性测试方法 Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants under Heat-Rejecting Conditions
ANSI/ASTM E1450-1992 液态氦中结构合金的抗拉强度测试方法 Test Method for Tension Testing of Structural Alloys in Liquid Helium
ANSI/ASTM E2250-2002 水可混合金属加工液中内毒素浓度测定 Determination of Endotoxin Concentration in Water-Miscible Metalworking Fluids
ANSI/ASTM E866-1996 黏结在蜂窝结构防护板上的铝合金防腐粘结底层胶粘材料规范 Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to be Adhesively Bonded in Honeycomb Shelter Panels (04.11)
ANSI/ASTM F1182-1997 阳极镀锌合金规范 Specification for Anodes, Sacrificial Zinc Alloy
ANSI/ASTM F1545-1996 带塑料内衬的铁合金管、配件和法兰规范 Specification for Plastic-Lined Ferrous Metal Pipe, Fittings and Flanges
ANSI/AWS A5.10-1992 无药皮铝和铝合金焊条和焊棒规范 Bare Aluminum and Aluminum Alloy Welding Electrodes and Rods, Specification for
ANSI/AWS A5.10/A 5.10M-1999 裸铝和铝合金焊接电极和焊条规范 Specification for Bare Aluminum and Aluminum-Alloy Welding Electrodes and Rods
ANSI/AWS A5.11-97/A 5.11M-2005 气体保护金属极电弧焊用镍和镍合金电焊条规范 Nickel and Nickel-Alloy Welding Electrodes for Shielded Metal Arc Welding, Specification for
ANSI/AWS A5.12/A 5.12M-1998 电弧焊接和切割用钨及钨合金焊条 Specification for Tungsten and Tungsten-Alloy Electrodes for Arc Welding and Cutting
ANSI/AWS A5.14/A 5.14M-2005 镍和镍合金裸焊条和焊棒规范 Specification for Nickel and Nickel-Alloy Bare Welding Rods and Electrodes
ANSI/AWS A5.16/A 5.16M-2007 钛和钛合金电焊条和焊条规范 Specification for Titanium and Titanium Alloy Welding Electrodes and Rods
ANSI/AWS A5.19-1992 镁合金焊条和焊棒 Magnesium Alloy Welding Electrodes and Rods
ANSI/AWS A5.2/A 5.2M-2007 氧燃料气焊接的碳钢和低合金钢棒材的规范 Specification for Carbon and Low Alloy Steel Rods for Oxyfuel Gas Welding
ANSI/AWS A5.23/A 5.23M-2007 埋弧焊用低合金钢电极和助熔剂规范 Specification for Low-Alloy Steel Electrodes and Fluxes for Submerged Arc Welding
ANSI/AWS A5.24/A 5.24M-2004 锆和锆合金焊接电极和焊条规范 Specification for Zirconium and Zirconium Alloy Welding Electrodes and Rods
ANSI/AWS A5.25/A.25M-1997 碳钢和高强度低合金钢电渣焊用自耗品规范 Specification for Consumables Used for Electroslag Welding of Carbon and High-Strength Low-Alloy Steels
ANSI/AWS A5.26/A 5.26M-1997 碳钢和高强度低合金钢气电焊用自耗品规范 Specification for Consumables Used for Electrogas Welding of Carbon and High-Strength Low-Alloy Steels
ANSI/AWS A5.28/A 5.28M-2005 气体保护电弧焊用低合金钢焊条和焊棒 Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc Welding
ANSI/AWS A5.29/A 5.29M-2005 熔剂芯电弧焊用低合金钢焊条的规范 Specification for Low-Alloy Steel Electrodes for Flux Cored Arc Welding
ANSI/AWS A5.3-1991 保护金属电弧焊用铝和铝合金电极 Aluminum and Aluminum Alloy Electrodes for Shielded Metal Arc Welding
ANSI/AWS A5.3/A 5.3M-1999 保护金属电弧焊用铝和铝合金电极 Aluminum and Aluminum Alloy Electrodes for Shielded Metal Arc Welding
ANSI/AWS A5.34/A 5.34M-2007 助熔剂芯电弧焊接用镍合金电极的规范 Specification for Nickel-Alloy Electrodes for Flux Cored Arc Welding
ANSI/AWS A5.5/A 5.5M-2006 屏蔽金属电弧焊用低合金钢电焊条的规范 Specification for Low-Alloy Steel Electrodes for Shielded Metal Arc Welding
ANSI/AWS A5.7/A 5.7M-2007 铜和铜合金裸焊条和电焊条规范 Copper and Copper-Alloy Bare Welding Rods, and Electrodes, Specification for
ANSI/AWS C1.4M/C 1.4-2000 碳钢和低合金钢电阻焊规范 Specification for Resistance Welding of Carbon and Low-alloy Steels
ANSI/AWS C2.18-1993 铝、锌及其合金和复合物的带有热喷覆层的钢的保护 Protection of Steel with Thermal Sprayed Coatings of Aluminum and Zinc and their Alloys and Composites
ANSI/AWS C2.23/C 2.23M-2003 铝、锌及其合金的热喷镀层(金属化处理)和钢防腐蚀保护复合材料的应用规范 Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel
ANSI/AWS D10.7-1986 铝和铝合金管气体保护电弧焊推荐惯例 Gas Shielded Arc Welding of Aluminum and Aluminum Alloy Pipe, Recommended Practices for
ANSI/AWS D10.7M/D 10.7-2000 铝和铝合金管气体保护电弧焊推荐规程 Gas Shielded Arc Welding of Aluminum and Aluminum Alloy Pipe, Recommended Practices for
ANSI/AWS G2.1M/G 2.1-2002 锻造镍基合金指南 Guide for the Joining of Wrought Nickel-Base Alloys
ANSI/AWS G2.4/G 2.4M-2006 钛和钛合金熔焊指南 Guide for the Fusion Welding of Titanium and Titanium Alloys
ANSI/CSA LC4-2007 用于燃气配送系统的压接铜和铜合金配件 Press-Connect Copper and Copper Alloy Fittings for Use in Fuel Gas Distribution Systems (same as CSA 6.32)
ANSI/IPC/EIA J-STD-006A-2002 电子钎焊用电子级钎料合金及助熔和非助熔固体钎料的要求 Requirements for Electronic Grade Solder Alloys and Fluxed and Non-Fluxed Solid Solders for Electronic Soldering Applications
ANSI/SAE J1268-1993 碳素钢和合金工字钢的可淬透性带 Hardenability Bands for Carbon and Alloy H Steels
ANSI/SAE J404-1994 SAE合金钢的化学成分 Chemical Compositions of SAE Alloy Steels
ASME B16.18-2001 铸铜合金软钎焊连接压力管件 (Cast copper alloy solder joint pressure fittings)
ASME B16.22-2001 锻铜和铜合金钎焊压力配件 (Wrought copper and copper alloy solder joint pressure fittings)
ASME B16.23-2002 DWV类铸铜合金钎焊连接排水管件 (Cast copper alloy solder joint drainage fittings: DWV)
ASME B16.24-2001 150、300、400、600、900、1500和2500 类铸铜合金管法兰和法兰配件 (Cast copper alloy pipe flanges and flanged fittings: Classes 150, 300, 400, 600, 900, 1500, and 2500)
ASME B16.26-1988 青铜扩口管用铸铜合金配件 (Cast copper alloy fittings for flared copper tubes)
ASME B16.29-2001 DWV类可锻铜和可锻铜合金钎焊连接排水管接头 (Wrought copper and wrought copper alloy solder joint drainage fittings - DWV)
ASME B16.50-2001 锻造铜及铜合金硬焊结合压力配件 (Wrought copper and copper alloy braze-joint pressure fittings)
ASME B31.3 Cases NO. 2-1993 压力管道用套管规程.套管141:在ANSI/ASME B 31.3管道标准中铝合金法兰的使用规则 (Cases code for pressure piping - Case 141: Rules for use of aluminium alloy flanges in ANSI/ASME B 31.3 piping)
ASTM A 1000-2005 特制弹簧级碳钢及合金钢丝标准规范 Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
ASTM A 1002-1999 镍铝有序合金铸件的标准规范 Standard Specification for Castings, Nickel-Aluminum Ordered Alloy
ASTM A 1008/A 1008Ma-2007 固溶淬火和烧固淬火的冷轧、碳钢、结构钢、高强度低合金钢、可加工性改善的高强度低合金钢薄板材的标准规范 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
ASTM A 1011/A 1011M-2007 热轧、碳钢、结构钢、高强度低合金钢、可加工性改善的高强度低合金钢和超高强度钢薄板材和带材的标准规范 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM A 1012-2002 无缝和焊接铁素体、奥氏体和双合金钢冷凝器和带整体散热片的热交换器管的标准规范 Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins
ASTM A 1016/A 1016Ma-2004 铁素体合金钢管、奥氏体合金钢管和不锈钢管一般要求的标准规范 Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
ASTM A 1017/A 1017M-2007 铬钼钨合金钢压力容器板材的标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten
ASTM A 1018/A 1018M-2007 热轧、碳素钢、商品钢、拉制钢、结构钢、高强度低合金钢、可加工性改善的高强度低合金钢和超高强度钢薄板材 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM A 102-2004 钒铁合金的标准规范 Standard Specification for Ferrovanadium
ASTM A 1025-2005 铁合金一般要求的标准规范 Standard Specification for Ferroalloys, General Requirements
ASTM A 1031-2005 热轧合金钢、拉制钢和结构钢薄板和带材、特厚卷材的标准规范 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled
ASTM A 1033-2004 亚共析碳钢和低合金钢相位变换的定量测量和报告的标准规程 Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations
ASTM A 1040-2007 规范锻造碳素钢、低合金钢、合金钢统一的标准等级组分的标准指南 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels
ASTM A 1041/A 1041M-2004 较高强度铬-钼-钨合金钢压力容器板的标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten
ASTM A 1046/A 1046M-2006 用热浸工艺测定锌铝镁合金涂覆的薄钢板的标准规范 Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process
ASTM A 1048/A 1048M-2006 高温工作的高强度铬钼钨合金钢压力容器锻件的标准规范 Standard Specification for Pressure Vessel Forgings, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten for Elevated Temperature Service
ASTM A 108-2007 冷加工碳素钢和合金钢棒材的标准规范 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
ASTM A 132-2004 钼铁合金标准规范 Standard Specification for Ferromolybdenum
ASTM A 144-2004 钨铁合金规范 Specification for Ferrotungsten
ASTM A 182/A 182Ma-2007 高温设备用锻制或轧制合金和不锈钢管法兰、锻制配件、阀门及零件的标准规范 Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
ASTM A 193/A 193M-2007 高温或高压设备及其他特殊用途的合金钢和不锈钢螺栓连接材料用标准规范 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications
ASTM A 194/A 194Ma-2007 高压或高温设备或高压高温设备的螺栓用碳素钢与合金钢螺母的标准规范 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
ASTM A 203/A 203M-1997 压力容器用镍合金钢板的标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel
ASTM A 204/A 204M-2003 压力容器用钼合金钢板的标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
ASTM A 209/A 209M-2003 锅炉和过热器用无缝碳钼合金钢管标准规范 Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
ASTM A 213/A 213Ma-2007 无缝铁素体和奥氏体合金钢锅炉、过热器和热交换器管的标准规范 Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
ASTM A 217/A 217M-2007 适合高温设备的承压部件用合金钢和马氏体不锈钢铸件的标准规范 Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
ASTM A 225/A 225M-2003 压力容器用锰钒镍合金钢板标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel
ASTM A 231/A 231M-2004 铬钒合金钢弹簧丝的标准规范 Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire
ASTM A 232/A 232M-2005 阀簧级铬矾合金钢的标准规范 Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
ASTM A 234/A 234M-2007 中温与高温设备用锻制碳素钢和合金钢管道配件的标准规范 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
ASTM A 242/A 242M-2004 高强度低合金结构钢标准规范 Standard Specification for High-Strength Low-Alloy Structural Steel
ASTM A 250/A 250M-2005 电阻焊接铁素体合金钢锅炉和过热器管的标准规范 Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes
ASTM A 288-1991 涡轮发电机磁性定位环用碳素钢和合金钢锻件 Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators
ASTM A 289/A 289M-1997 发电机用无磁档圈用合金钢锻件的标准规范 Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators
ASTM A 29/A 29M-2005 热锻碳素钢棒和合金钢棒一般要求的标准规范 Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for
ASTM A 290/A 290M-2005 减速齿轮用碳素钢及合金钢锻件的标准规范 Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears
ASTM A 291/A 291M-2005 小齿轮、齿轮和减速齿轮轴用碳素钢和合金钢锻件的标准规范 Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears
ASTM A 302/A 302M-2003 压力容器用锰钼和锰钼镍合金钢板的标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
ASTM A 304-2005 有顶端淬火硬性要求的碳钢及合金钢棒材的标准规范 Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
ASTM A 308/A 308M-2006 经热浸工艺涂层的镀铅锡(铅锡合金)铁薄板标准规范 Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process
ASTM A 320/A 320Ma-2007 低温设备用合金钢和不锈钢螺栓材料的标准规范 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature Service
ASTM A 322-2007 标准级合金钢棒材的标准规范 Standard Specification for Steel Bars, Alloy, Standard Grades
ASTM A 324-1973 钛铁合金 Standard Specification for Ferrotitanium
ASTM A 334/A 334Ma-2004 低温设备用无缝和焊接碳素和合金钢管的标准规范 Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service
ASTM A 335/A 335M-2006 高温设备用无缝铁素体合金钢管的标准规范 Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
ASTM A 336/A 336M-2007 压力和高温部件用合金钢锻件的标准规范 Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
ASTM A 350/A 350Ma-2004 管道部件用要求切口韧性试验的碳素钢与低合金钢锻件的标准规范 Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
ASTM A 350/A 350Mc-2000 管道部件用要求切口韧性试验的碳素钢与低合金钢锻件的标准规范 Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
ASTM A 353/A 353M-2004 压力容器用经二次正火及回火处理的含9%镍的合金钢板标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel, Double-Normalized and Tempered
ASTM A 354-2007 淬火和回火合金钢螺栓、螺柱和其它外螺纹紧固件的标准规范 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
ASTM A 355-1989 掺氮用合金钢棒 Standard Specification for Steel Bars, Alloys, for Nitriding
ASTM A 356/A 356M-2007 汽轮机用厚壁不锈钢、低合金钢、碳素钢和钢铸件标准规范 Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines
ASTM A 369/A 369M-2006 高温设备用锻制和镗加工碳素钢管和铁素体合金钢管标准规范 Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
ASTM A 372/A 372M-2003 薄壁压力容器用碳钢和合金钢锻件的标准规范 Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels
ASTM A 387/A 387Ma-2006 压力容器用铬钼合金钢板的标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
ASTM A 391/A 391M-2001 80度(角度)合金钢链条标准规范 Standard Specification for Grade 80 Alloy Steel Chain
ASTM A 401/A 401M-2003 铬硅合金钢丝的标准规范 Standard Specification for Steel Wire, Chromium-Silicon Alloy
ASTM A 420/A 420M-2007 低温设备用锻造碳钢和合金钢的管道配件用标准规范 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
ASTM A 423/A 423M-1995 无缝和电焊低合金钢管的标准规范 Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes
ASTM A 426/A 426M-2007 高温设备用离心浇铸铁素体合金钢管的标准规范 Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
ASTM A 427-2002 冷轧和热轧用可锻合金钢轧辊标准规范 Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction
ASTM A 434-2006 热锻或冷精轧经淬火及回火的合金钢棒标准规范 Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered
ASTM A 437/A 437M-2006 高温用经特殊处理的渦轮型合金钢螺栓材料标准规范 Standard Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature Service
ASTM A 447/A 447M-1993 高温用镍铬铁合金钢铸件(25-12级)的标准规范 Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service
ASTM A 450/A 450Ma-2004 碳素钢管、铁素体合金钢管及奥氏体合金钢管一般要求的标准规范 Standard Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes
ASTM A 470/A 470M-2005 涡轮转子和轴用经真空处理的碳素钢和合金钢锻件的标准规范 Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts
ASTM A 471-2006 涡轮转子盘和叶轮用真空处理合金钢锻件的标准规范 Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels
ASTM A 482-2005 铬铁合金硅的标准规范 Standard Specification for Ferrochrome-Silicon
ASTM A 483-2004 硅锰合金标准规范 Standard Specification for Silicomanganese
ASTM A 49-2001 热处理碳素钢连接棒材、微合金连接棒材和法兰连接棒材的标准规范 Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars
ASTM A 490-2006 最小抗拉强度为150ksi的热处理合金钢结构螺栓标准规范 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
ASTM A 494/A 494M-2007 镍和镍合金铸件的标准规范 Standard Specification for Castings, Nickel and Nickel Alloy
ASTM A 495-2006 硅钙合金的标准规范 Standard Specification for Calcium-Silicon Alloys
ASTM A 505-2000 热轧和冷轧合金钢薄板与带材一般要求的标准规范 Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
ASTM A 506-2005 热轧和冷轧合金钢和结构合金钢薄板材与带材的标准规范 Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
ASTM A 507-2006 热轧和冷轧拉丝合金钢片材和带材的标准规范 Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
ASTM A 508/A 508Mb-2005 压力容器用经淬火和回火真空处理的碳素钢与合金钢锻件的标准规范 Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels
ASTM A 513-2007 电阻焊碳素钢与合金钢机械钢管的标准规范 Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
ASTM A 514/A 514M-2005 焊接用经淬火与回火的高屈服强度合金钢板的标准规范 Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
ASTM A 517/A 517M-2006 压力容器用经回火与淬火的高强度合金钢板 Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered
ASTM A 519-2006 无缝碳钢和合金钢机械装管用标准规范 Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
ASTM A 522/A 522M-2007 低温设备用锻制或轧制含镍8%和9%的合金钢法兰、配件、阀门和零件的标准规范 Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
ASTM A 530/A 530Ma-2004 专用碳素钢和合金钢管一般要求的标准规范 Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
ASTM A 533/A 533M-1993 压力容器用经回火和淬火的锰钼及锰钼镍合金钢板 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
ASTM A 540/A 540M-2006 特殊用合金钢螺栓材料的标准规范 Standard Specification for Alloy-Steel Bolting Materials for Special Applications
ASTM A 541/A 541M-2005 压力容器部件用经淬火和回火的碳素钢及合金钢锻件的标准规范 Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components
ASTM A 542/A 542M-1999 压力容器用经回火和淬火的铬钼、铬钼钒及铬钼钒钛硼合金钢板的标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium
ASTM A 543/A 543M-1993 压力容器用经回火和淬火的镍铬钼合金钢板的标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum
ASTM A 550-2006 铌铁合金的标准规范 Standard Specification for Ferrocolumbium
ASTM A 553/A 553M-2006 压力容器用经淬火和回火的含8%和9%镍的合金钢板的标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel
ASTM A 560/A 560M-2005 铬镍合金铸件的标准规范 Standard Specification for Castings, Chromium-Nickel Alloy
ASTM A 562/A 562M-2006 玻璃或扩散金属镀层的压力容器用锰钛合金碳素钢板 Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
ASTM A 563-2007 碳和合金钢螺母标准规范 Standard Specification for Carbons and Alloy Steel Nuts
ASTM A 563M-2006 碳素钢和合金钢螺母(米制)用标准规范 Standard Specification for Carbon and Alloy Steel Nuts (Metric)
ASTM A 568/A 568M-2007 高强度、低合金、热轧和冷轧碳素薄板钢一般要求的标准规范 Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
ASTM A 572/A 572M-2007 高强度低合金钶钒结构钢标准规范 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
ASTM A 574-2004 合金钢内六角螺钉标准规范 Standard Specification for Alloy Steel Socket-Head Cap Screws
ASTM A 574M-2004 合金钢内六角螺钉(米制)标准规范 Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric]
ASTM A 579/A 579Ma-2004 超强度合金钢锻件的标准规范 Standard Specification for Superstrength Alloy Steel Forgings
ASTM A 588/A 588M-2005 4英寸(100mm)厚、最小屈服点50ksi(345MPa)的高强度低合金结构钢标准规范 Standard Specification for High-Strength Low-Alloy Structural Steel with 50 ksi [345 MPa] Minimum Yield Point to 4-in. [100-mm] Thick
ASTM A 592/A 592M-2004 压力容器用经回火和淬火的高强度低合金钢锻制配件和零件标准规范 Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Fittings and Parts for Pressure Vessels
ASTM A 595/A 595M-2006 建筑用锥形、高强度低合金或低碳钢管的标准规范 Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use
ASTM A 606-2004 改进防大气腐蚀性的热轧和冷轧高强度低合金钢薄板和带材的标准规范 Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
ASTM A 608/A 608M-2006 高温压力设备用离心铸造的铁铬镍高合金钢管标准规范 Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperature
ASTM A 609/A 609M-1991 碳素钢,低合金钢和马氏体不锈钢铸件及其超声波检验 Castings, Carbon, Low-Alloy and Martensitic Stainless Steel, Ultrasonic Examination Thereof
ASTM A 610-1979 尺寸测量用铁合金的取样和试验的标准试验方法 Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
ASTM A 618/A 618M-2004 热塑焊接和无缝高强度低合金结构钢管的标准规范 Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
ASTM A 633/A 633M-2001 正火的高强度低合金结构钢板标准规范 Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
ASTM A 635/A 635M-2007 高强度低合金和可加工性改善的高强度低合金热轧碳素结构薄板钢、带钢和重型粗卷钢一般要求的标准规范 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
ASTM A 638/A 638M-2000 高温设备用沉积硬化铁基超级合金棒、锻件及锻坯料标准规范 Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service
ASTM A 645/A 645M-2005 经特殊热处理的5%镍合金钢压力容器板的标准规范 Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated
ASTM A 646/A 646M-2006 航行器和航空器锻件用优质合金钢大方坯和坯段的标准规范 Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
ASTM A 653/A 653M-2007 用热浸处理镀锌或镀锌铁合金钢薄板的标准规范 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
ASTM A 656/A 656M-2005 具有改良可模锻性的热轧结构钢制高强度低合金板标准规范 Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
ASTM A 668/A 668M-2004 一般工业用碳素钢和合金钢锻件的标准规范 Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
ASTM A 678/A 678M-2005 淬火和回火的碳素钢和高强度低合金结构钢板的标准规范 Standard Specification for Quenched-and-Tempered Carbon and High-Strength Low-Alloy Structural Steel Plates
ASTM A 681-2007 工具钢合金的标准规范 Standard Specification for Tool Steels Alloy
ASTM A 689-1997 弹簧用碳素钢及合金钢棒的标准规范 Standard Specification for Carbon and Alloy Steel Bars for Springs
ASTM A 690/A 690M-2007 在海洋环境中使用耐大气腐蚀的高强度低镍铜合金工字形磷钢桩和薄板磷钢桩用标准规范 Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments
ASTM A 691-1998 高温下高压装置用电熔焊碳素钢和合金钢管的标准规范 Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
ASTM A 694/A 694M-2003 高压传输设备用管法兰、配件、阀门及零件用碳素钢及合金钢锻件的标准规范 Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
ASTM A 706/A 706Ma-2006 混凝土加筋用低合金异形钢筋和无节钢筋的标准规范 Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
ASTM A 707/A 707M-2002 低温设备用锻制碳素钢和合金钢法兰的标准规范 Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
ASTM A 710/A 710M-2002 沉淀硬化低碳镍-铜-铬-钼-铌合金结构钢板的标准规范 Standard Specification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates
ASTM A 712-1997 软磁性合金电阻率的标准试验方法 Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys
ASTM A 714-1999 高强度低合金焊接和无缝钢管的标准规范 Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe
ASTM A 723/A 723M-2002 高强度压力元件用合金钢锻件的标准规范 Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application
ASTM A 729/A 729M-2006 公共交通和电气铁路设施用热处理的合金钢轮轴的标准规范 Standard Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service
ASTM A 732/A 732M-2005 一般用途熔模铸造碳钢和低合金钢及高温用高强度钴合金钢铸件标准规范 Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
ASTM A 734/A 734Ma-1987 经淬火和回火的合金钢与高强度低合金钢压力容器板标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered
ASTM A 735/A 735M-2003 中温和低温压力容器用低碳锰钼钶合金钢板的标准规范 Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service
ASTM A 736/A 736M-2003 压力容器用低碳时效硬化的镍铜铬钼铌和镍铜锰钼铌合金钢板的标准规范 Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium and Nickel-Copper-Manganese-Molybdenum-Columbium Alloy Steel
ASTM A 737/A 737M-1999 高强度低合金钢压力容器板的标准规范 Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel
ASTM A 739a-1990 高温或加压部件或高温加压部件用热轧合金钢棒标准规范 Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both
ASTM A 744/A 744M-2006 严酷条件下使用的耐腐蚀镍铬铁合金铸件的标准规范 Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
ASTM A 749/A 749M-1997 热轧高强度碳素低合金钢带材的标准规范 Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for
ASTM A 752-2004 合金钢条和粗圆钢丝的标准规范 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel
ASTM A 752M-2004 合金钢条和粗圆钢丝(米制)一般要求的标准规范 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric]
ASTM A 753-2002 煅制镍铁软磁合金标准规范 Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)
ASTM A 765/A 765M-2007 符合强制韧性要求的碳素钢和低合金钢压力容器部件锻件的标准规范 Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements
ASTM A 768/A 768M-2005 涡轮机转子及轴用经真空处理的含铬12%的合金钢锻件的标准规范 Standard Specification for Vacuum-Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotors and Shafts
ASTM A 781/A 781M-2006 一般工业用钢铸件及合金铸件通用要求的标准规范 Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
ASTM A 782/A 782M-2006 经淬火和回火的锰铬钼硅锆合金钢压力容器板的标准规范 Standard Specification for Pressure-Vessel Plates, Quenched-and-Tempered, Manganese-Chromium-Molybdenum-Silicon Zirconium Alloy Steel
ASTM A 786/A 786M-2005 热轧制碳素钢、低合金钢、高强度低合金钢及合金钢楼板的标准规范 Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
ASTM A 792/A 792Ma-2006 经热浸工艺涂层55%铝锌合金铁薄板材标准规范 Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
ASTM A 800/A 800M-2001 奥氏体合金钢铸件中铁素体含量估算的标准实施规程 Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof
ASTM A 801-2004 锻造铁-钴高磁饱和合金的标准规范 Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650)
ASTM A 829/A 829M-2006 合金结构钢板的标准规范 Standard Specification for Alloy Structural Steel Plates
ASTM A 832/A 832M-2006 压力容器用铬钼钒合金钢板的标准规范 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium
ASTM A 835-1984 铁合金与附加合金的尺寸的标准规范 Standard Specification for Sizes of Ferroalloys and Alloy Additives
ASTM A 835/A 835M-1984 铁合金和合金添加剂尺寸的标准规范 Standard Specification for Sizes of Ferroalloys and Alloy Additives
ASTM A 837/A 837M-2006 渗碳用合金钢锻件标准规范 Standard Specification for Steel Forgings, Alloy, for Carburizing Applications
ASTM A 838-2002 继电器用易切铁素体不锈软磁合金棒标准规范 Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications
ASTM A 844/A 844M-2004 压力容器用直接淬火加工的含镍9%的合金钢板标准规范 Standard Specification for Steel Plates, 9 % Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process
ASTM A 847/A 847M-2005 提高耐大气腐蚀性的冷成型焊接和无缝高强度低合金结构管道用标准规范 Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
ASTM A 852/A 852M-2003 最小屈服强度为70ksi(485MPa)厚度为4英寸(100mm)的经淬火和回火的低合金结构钢板标准规范 Standard Specification for Quenched and Tempered Low-Alloy Structural Steel Plate with 70 ksi [485 MPa] Minimum Yield Strength to 4 in. [100 mm] Thick
ASTM A 855/A 855M-2003 锌-5%铝-铈合金涂覆钢丝绳的标准规范 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Wire Strand
ASTM A 856/A 856M-2003 锌-5%铝-铈合金涂覆碳素钢丝的标准规范 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
ASTM A 859/A 859M-2004 压力容器部件用时效硬化合金钢锻件的标准规范 Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components
ASTM A 860/A 860M-2000 锻制高强度低合金钢对缝焊接配件标准规范 Standard Specification for Wrought High-Strength Low-Alloy Steel Butt-Welding Fittings
ASTM A 871/A 871M-2003 耐大气腐蚀的高强度低合金结构钢板标准规范 Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
ASTM A 873/A 873M-1987 压力容器用铬钼合金钢薄板和带材 Steel Sheet and Strip, Chromium-Molybdenum Alloy for Pressure Vessels
ASTM A 875/A 875M-2006 热浸处理的镀锌-5%铝合金的钢薄板用标准规范 Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process
ASTM A 877/A 877M-2005 阀簧级铬硅合金钢丝的标准规范 Standard Specification for Steel Wire, Chromium-Silicon Alloy Valve Spring Quality
ASTM A 878/A 878M-2005 阀簧级改进的铬硅合金钢丝的标准规范 Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality
ASTM A 891/A 891M-2007 涡轮转子转盘和转轮用沉淀硬化铁基超耐热合金锻件的标准规范 Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels
ASTM A 90/A 90M-2007 带锌或锌合金涂层的钢铁制品上涂层重量(质量)用标准试验方法 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM A 901-2003 半成品型非晶形磁芯合金的标准规范 Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types
ASTM A 906/A 906M-2002 悬挂式提升设备用等级 80 和 等级100 的合金钢链式吊索的标准规范 Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting
ASTM A 909/A 909M-2006 一般工业用微量合金钢锻件用标准规范 Standard Specification for Steel Forgings, Microalloy, for General Industrial Use
ASTM A 915/A 915M-1993 化学要求同锻件类似的碳素钢和合金钢的标准规范 Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades
ASTM A 918-2006 要求标识各表面镀层重量的电解液工艺处理的涂覆锌-镍合金钢薄板材的标准规范 Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
ASTM A 920/A 920M-1997 具有机械特性,微合金,热锻,高质量钢棒的标准规范 Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties
ASTM A 920/A 920Ma-2002 具有机械特性的微合金热锻高质量钢棒标准规范 Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties
ASTM A 921/A 921M-1993 后热锻用微合金,高质量,热锻钢棒的标准规范 Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging
ASTM A 925-2003 地面架空线用锌-5%铝-铈合金涂覆钢绞线的标准规范 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand
ASTM A 940/A 940M-2006 差温热处理真空处理钢锻件、合金钢锻件的标准规范 Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors
ASTM A 941a-2006 与钢、不锈钢、相关合金和铁合金相关的术语 Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
ASTM A 945/A 945M-2006 改良可焊接性、可加工性及韧性用低碳限硫的高强度低合金结构钢板的标准规范 Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness
ASTM A 946-1995 耐腐蚀和耐热用铬,铬-镍和硅合金钢板,薄板和带的标准规范 Standard Specification for Chromium, Chromium-Nickel and Silicon Alloy Steel Plate, Sheet, and Strip for Corrosion and Heat Resisting Service
ASTM A 952/A 952M-2002 锻造等级 80 和等级100 的合金钢提升组件和焊接联接杆的标准规范 Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links
ASTM A 957/A 957M-2006 一般工业用共同要求的熔模铸造钢和合金的标准规范 Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
ASTM A 958-2000 带拉伸要求,化学要求的类似于标准铸造等级的铸钢,碳和合金的标准规范 Standard Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades
ASTM A 968/A 968M-1996 耐腐蚀和耐热设备用铬、铬镍和硅合金钢棒及型材的标准规范 Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service
ASTM A 973/A 973M-2000 100级合金钢链的标准规范 Standard Specification for Grade 100 Alloy Steel Chain
ASTM A 983/A 983M-2006 中速柴油机用连续晶粒流动锻造碳钢及合金钢曲轴的标准规范 Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
ASTM A 989/A 989M-2007 高温设备用热等静压压制的合金钢法兰、配件、阀门和部件的标准规范 Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
ASTM A 99-2003 锰铁合金标准规范 Standard Specification for Ferromanganese
ASTM A 990-2006 防腐设备承压部件用特殊控制的铁镍铬及镍合金铸件的标准规范 Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service
ASTM A 994-2005 钢、不锈钢及相关合金产品规范的编辑程序和格式的标准指南 Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys
ASTM A 999/A 999Ma-2004 合金钢及不锈钢管一般要求的标准规范 Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
ASTM B 100a-2003 桥梁和其它结构用锻制铜合金轴承和膨胀中厚板及薄板的标准规范 Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use
ASTM B 102-2000 铅和锡合金压模铸件的标准规范 Standard Specification for Lead- and Tin-Alloy Die Castings
ASTM B 105-2005 电导体用硬拉铜合金线标准规范 Standard Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors
ASTM B 107/B 107M-2007 镁合金挤压棒材、杆材、型材、管材和线材用标准规范 Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire
ASTM B 108-2006 铝合金永久模型铸造件的标准规范 Standard Specification for Aluminum-Alloy Permanent Mold Castings
ASTM B 111/B 111M-2004 铜和铜合金无缝冷凝器管和孔塞坯料的标准规范 Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock
ASTM B 122/B 122M-2006 铜镍锡合金、铜镍锌合金(镍银)和铜镍合金板材、薄板材、带材及轧制棒材的标准规范 Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar
ASTM B 124/B 124M-2006 铜和铜合金锻造杆材、棒材和型材的标准规范 Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
ASTM B 127-2005 镍铜合金(UNS N04400)板、薄板和带材的标准规范 Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip
ASTM B 131-2007 铜合金弹头火帽壳的标准规范 Standard Specification for Copper Alloy Bullet Jacket Cups
ASTM B 151/B 151M-2005 铜镍锌合金(镍银)和铜镍杆材及棒材的标准规范 Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar
ASTM B 153-2005 铜和铜合金管膨胀(针试验)的标准试验方法 Standard Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing
ASTM B 154-2005 铜合金的硝酸亚汞试验用标准试验方法 Standard Test Method for Mercurous Nitrate Test for Copper Alloys
ASTM B 163-2004 无缝镍和镍合金冷凝器及热交换器管的标准规范 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
ASTM B 164-2003 镍铜合金杆材、棒材和线材标准规范 Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire
ASTM B 165-2005 无缝镍铜合金管标准规范(UNS N04400) Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube
ASTM B 166-2006 镍铬铁合金(UNS N06600、N06601、N06603、N06690、N06693、N06025和N06045)和镍铬钴钼合金(UNS N06617)杆材 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Rod, Bar, and Wire
ASTM B 167-2006 镍-铬-铁合金(UNS N06600、N06601、N06603、N06690、N06693、N06025和N06045)和镍-铬-钴-钼合金(UNS N06617 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Seamless Pipe and Tube
ASTM B 168-2006 镍-铬-铁合金(UNS N06600、N06601、N06603、N06690、N06693、N06025和N06045)和镍-铬-钴-钼合金(UNS N06617 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Plate, Sheet, and Strip
ASTM B 171/B 171M-2004 压力容器、冷凝器和热交换器用铜合金板材和薄板材的标准规范 Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers
ASTM B 176-2004 铜合金压模铸件标准规范 Standard Specification for Copper-Alloy Die Castings
ASTM B 179-2006 全铸造工艺的铸锭和熔融成形铸件中铝合金的标准规范 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes
ASTM B 189-2005 电气用铅涂覆和铅合金涂覆软铜线的标准规范 Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes
ASTM B 19-2005 铜锌合金薄板材、带材、板材、棒材和圆盘的标准规范 Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks
ASTM B 194-1996 铜铍合金中厚板、薄板、带材和轧制棒材标准规范 Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
ASTM B 196/B 196M-2007 铜铍合金杆材和棒材的标准规范 Standard Specification for Copper-Beryllium Alloy Rod and Bar
ASTM B 197/B 197M-2007 铜-铍合金线的标准规范 Standard Specification for Copper-Beryllium Alloy Wire
ASTM B 199-2007 镁合金永久铸模铸件用标准规范 Standard Specification for Magnesium-Alloy Permanent Mold Castings
ASTM B 200-1985 钢及铁合金表面铅和铅锡合金的电解沉积镀层标准规范 Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys
ASTM B 206/B 206M-2007 铜-镍-锌(镍银)合金线和铜-镍合金线用标准规范 Standard Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire
ASTM B 208-2006 砂型铸造、硬模铸造、离心铸造和连续铸造铜合金铸件抗拉试验用试样制备的标准实施规范 Standard Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings
ASTM B 209-2007 铝和铝合金薄板材和板材的标准规范 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
ASTM B 209M-2007 铝和铝合金薄板材和板材(米制)的标准规范 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate [Metric]
ASTM B 210-2004 拉制无缝铝和铝合金管的标准规范 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
ASTM B 210M-2005 拉制铝和铝合金无缝管的标准规范(米制) Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes [Metric]
ASTM B 211-2003 铝及铝合金棒材、条材和线材标准规范 Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire
ASTM B 211M-2003 铝及铝合金棒材、条材和线材(米制)标准规范 Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire [Metric]
ASTM B 221-2006 铝和铝合金挤压棒材、杆材、金属丝、型材和管道的标准规范 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
ASTM B 221M-2007 铝和铝合金挤压棒材、杆材、线材、型材和管材用标准规范(米制) Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes [Metric]
ASTM B 23-2000 白色金属轴承合金(商品名称为"巴氏合金")的标准规范 Standard Specification for White Metal Bearing Alloys (Known Commercially as "Babbitt Metal")
ASTM B 234-2004 冷凝器及热交换器用铝和铝合金拉制无缝管的标准规范 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers
ASTM B 234M-2004 冷凝器及热交换器用铝和铝合金拉制无缝管的标准规范(米制) Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers [Metric]
ASTM B 240-2007 铸造和压模铸件用铸锭结构中锌和锌铝(ZA)合金的标准规范 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
ASTM B 241/B 241M-2002 铝及铝合金无缝管和挤制管标准规范 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
ASTM B 247a-2002 铝和铝合金压模锻件、手工锻件和轧制环形锻件的标准规范 Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
ASTM B 247Ma-2002 铝和铝合金压模锻件、手工锻件和轧制环形锻件的标准规范(米制) Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings [Metric]
ASTM B 248-2007 锻制铜和铜合金厚板、薄板、带材及轧制棒材的一般要求的标准规范 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar
ASTM B 248M-2007 锻制铜和铜合金厚板材、薄板材、带材及轧制棒材的一般要求的标准规范(米制) Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar [Metric]
ASTM B 249/B 249M-2006 锻制铜及铜合金棍材、棒材、型材和锻件一般要求的标准规范 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
ASTM B 250/B 250M-2007 可锻铜合金线一般要求的标准规范 Standard Specification for General Requirements for Wrought Copper Alloy Wire
ASTM B 251-2002 锻制无缝铜及铜合金管一般要求的标准规范 Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube
ASTM B 252-1992 电镀层和转化涂层用锌合金压模铸件的制备 Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings
ASTM B 253-1987 电镀用铝合金的制备标准指南 Standard Guide for Preparation of Aluminum Alloys for Electroplating
ASTM B 26/B 26M-2005 铝合金砂型铸件标准规范 Standard Specification for Aluminum-Alloy Sand Castings
ASTM B 265b-2006 钛及钛合金带材、薄板及板材标准规范 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
ASTM B 271-2006 铜基合金离心浇铸件用标准规范 Standard Specification for Copper-Base Alloy Centrifugal Castings
ASTM B 275-2005 铸造和锻造某些有色金属和合金的标准实施规程汇编 Standard Practice for Codification of Certain Nonferrous Metals and Alloys, Cast and Wrought
ASTM B 276-2005 硬质合金表观孔隙率的标准试验方法 Standard Test Method for Apparent Porosity in Cemented Carbides
ASTM B 281-1988 电镀层和转化镀层用铜和铜基合金的制备 Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings
ASTM B 283-2006 铜及铜合金压模锻件(热压)的标准规范 Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
ASTM B 294-1992 硬质合金硬度的测试方法 Test Method for Hardness Testing of Cemented Carbides
ASTM B 296-2003 镁合金铸件和锻件回火名称与符号的标准实施规程 Standard Practice for Temper Designations of Magnesium Alloys, Cast and Wrought
ASTM B 308/B 308M-2002 铝合金6061-T6标准结构型材标准规范 Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles
ASTM B 30a-2006 铜基合金锭的标准规范 Standard Specification for Copper Alloys in Ingot Form
ASTM B 313/B 313M-2002 铝和铝合金圆焊接管标准规范 Standard Specification for Aluminum and Aluminum-Alloy Round Welded Tubes
ASTM B 315-2006 无缝铜合金管和莞标准规范 Standard Specification for Seamless Copper Alloy Pipe and Tube
ASTM B 316/B 316M-2002 铆接和冷镦铝及铝合金线材与棒材标准规范 Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
ASTM B 317/B 317M-2007 电气用铝和铝合金挤压棒材、杆材、管和结构型材的标准规范 Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor)
ASTM B 319-1991 电镀用铅和铅合金的制备 Standard Guide for Preparation of Lead and Lead Alloys for Electroplating
ASTM B 327-2001 制作锌压模合金用铝合金硬化剂标准规范 Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys
ASTM B 333-2003 镍钼合金板、薄板和带材标准规范 Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip
ASTM B 335-2003 镍钼合金杆材标准规范 Standard Specification for Nickel-Molybdenum Alloy Rod
ASTM B 338a-2006 冷凝器和热交换器用无缝和焊接钛与钛合金管的标准规范 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
ASTM B 344-2001 电加热元件用拉制或轧制镍铬及镍铬铁合金标准规范 Standard Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements
ASTM B 345/B 345M-2002 气体和油传输和配送管道系统用铝及铝合金无缝管和无缝挤制管标准规范 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems
ASTM B 348a-2006 钛和钛合金棒材和坯锭的标准规范 Standard Specification for Titanium and Titanium Alloy Bars and Billets
ASTM B 350/B 350M-2002 核工业用锆和锆合金铸锭的标准规范 Standard Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application
ASTM B 351-1997 核用热轧和冷加工锆及锆合金棒材、杆材和线材标准规范 Standard Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application
ASTM B 351/B 351M-2007 核设备用热轧和冷加工锆和锆合金棒材、杆材和线材的标准规范 Standard Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application
ASTM B 352-1997 核用锆及锆合金板、带材和板标准规范 Standard Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear Application
ASTM B 352/B 352M-2002 核设备用锆和锆合金薄板,带和板材的标准规范 Standard Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear Application
ASTM B 353-2007 核设施(核燃料覆层除外)用锻制锆及锆合金无缝与焊接管的标准规范 Standard Specification for Wrought Zirconium and Zirconium Alloy Seamless and Welded Tubes for Nuclear Service (Except Nuclear Fuel Cladding)
ASTM B 359/B 359M-2002 具有整体散热叶片的冷凝器及热交换器用无缝铜和铜合金管标准规范 Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins
ASTM B 361-2002 工厂加工的锻制铝及铝合金焊接件的标准规范 Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings
ASTM B 363a-2006 无缝和焊接的非合金钛及钛合金焊接配件标准规范 Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings
ASTM B 364-1996 钽及钽合金铸锭标准规范 Standard Specification for Tantalum and Tantalum Alloy Ingots
ASTM B 365-1998 钽及钽合金杆材和线材标准规范 Standard Specification for Tantalum and Tantalum Alloy Rod and Wire
ASTM B 366b-2004 工厂制锻造镍和镍合金配件的标准规范 Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings
ASTM B 367-2006 钛和钛合金铸件的标准规范 Standard Specification for Titanium and Titanium Alloy Castings
ASTM B 369-2006 铜-镍合金铸件标准规范 Standard Specification for Copper-Nickel Alloy Castings
ASTM B 371/B 371M-2006 铜-锌-硅合金杆材的标准规范 Standard Specification for Copper-Zinc-Silicon Alloy Rod
ASTM B 372-1997 无缝铜及铜合金矩形波导管标准规范 Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube
ASTM B 381a-2006 钛和钛合金锻件的标准规范 Standard Specification for Titanium and Titanium Alloy Forgings
ASTM B 386-2003 钼和钼合金板、薄板、带材和箔的标准规范 Standard Specification for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip, and Foil
ASTM B 387-1990 钼及钼合金棒、条和线材 Molybdenum and Molybdenum Alloy Bar, Rod and Wire
ASTM B 390-1992 钨硬质合金表观晶粒尺寸及其分布的评定 Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides
ASTM B 392-2003 铌和铌合金棒材、杆材及线材标准规范 Standard Specification for Niobium and Niobium Alloy Bar, Rod, and Wire
ASTM B 393-2005 铌和铌合金带材、薄板及板材的标准规范 Standard Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate
ASTM B 394-2003 铌和铌合金无缝及焊接管标准规范 Standard Specification for Niobium and Niobium Alloy Seamless and Welded Tubes
ASTM B 395/B 395M-2002 U型弯曲无缝铜和铜合金热交换器和冷凝器管的标准规范 Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes
ASTM B 398/B 398M-2002 电气用铝合金6201-T81线的标准规范 Standard Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes
ASTM B 399/B 399M-2004 同心绞捻的铝合金6201-T81导线标准规范 Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors
ASTM B 403-2007 镁合金熔模铸件的标准规范 Standard Specification for Magnesium-Alloy Investment Castings
ASTM B 406-1996 硬质合金横向断裂强度的标准试验方法 Standard Test Method for Transverse Rupture Strength of Cemented Carbides
ASTM B 407-2004 镍铁铬合金无缝管的标准规范 Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
ASTM B 408-2006 镍铁铬合金杆材和棒材用标准规范 Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar
ASTM B 409-2006 镍铁铬合金厚板材、薄板材和带材用标准规范 Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip
ASTM B 411-1996 铜镍硅合金杆材和棒材标准规范 Standard Specification for Copper-Nickel-Silicon Alloy Rod and Bar
ASTM B 411/B 411M-2006 铜-镍-硅合金杆材和棒材标准规范 Standard Specification for Copper-Nickel-Silicon Alloy Rod and Bar
ASTM B 412-1995 铜镍硅合金丝标准规范 Standard Specification for Copper-Nickel-Silicon Alloy Wire
ASTM B 422-2006 铜-铝-硅-钴合金、铜-镍-硅-镁合金、铜-镍-硅合金、铜-镍-铝-镁合金和铜-镍-锡合金薄板材和带材的标准规范 Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip
ASTM B 423-2005 镍铁铬钼铜合金无缝管道标准规范(UNS N08825 and N08221) Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and N08221)* Seamless Pipe and Tube
ASTM B 424-2005 镍铁铬钼铜合金(UNS N08825和UNS N08221)板材、薄板及带材的标准规范 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221)* Plate, Sheet, and Strip
ASTM B 425-1999 镍铁铬钼铜合金(UNS N08825和UNS N08221)杆材和棒材标准规范 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221) Rod and Bar
ASTM B 427-2002 齿轮用青铜合金铸件标准规范 Standard Specification for Gear Bronze Alloy Castings
ASTM B 428-1993 矩形和正方形铜和铜合金管扭转角的标准试验方法 Standard Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube
ASTM B 429/B 429M-2006 挤压型铝合金管和管道的标准规范 Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube
ASTM B 432-2004 包铜及包铜合金钢板的标准规范 Standard Specification for Copper and Copper Alloy Clad Steel Plate
ASTM B 434-2006 镍钼铬铁合金(UNS N10003、UNS N10242)厚板材、薄板材和带材用标准规范 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, UNS N10242)* Plate, Sheet, and Strip
ASTM B 443-2000 镍铬钼铌合金(UNS N06625)和镍铬钼硅合金(UNS N06219)板、薄板和带材标准规范 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219)* Plate, Sheet, and Strip
ASTM B 444-2006 镍铬钼铌合金(UNS N06625和UNS N06852)和镍铬钼硅合金(UNS N06219)管道和管用标准规范 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube
ASTM B 446-2003 镍铬钼铌合金(UNS N06625)、镍铬钼硅合金(UNS N06219)和镍铬钼钨合金(UNS N06650)杆材和棒材标准规范 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650)* Rod and Bar
ASTM B 453/B 453M-2005 铜锌铅合金(含铅青铜)杆材、棒材和型材的标准规范 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes
ASTM B 455-2005 铜锌铅合金(加铅黄铜)挤压型材的标准规范 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes
ASTM B 462-2006 腐蚀性锻制或轧制的UNS N06030、N06022、N06035、N06200、N06059、N06686、N08020、N08024、N08026、N08367 Specification for Forged or Rolled UNS N06030,N06022,N06035,N06200,N06059,N06686,N08020,N08024,N08026,N08367,N10276,N10665, N10675,N10629, N08031,N06045, N06025, & R20033 Alloy Pipe Flanges, Forged Fitting, & Values & Parts for Corrosive
ASTM B 463-2004 UNS N08020、UNS N08026和UNS N08024合金板、薄板和带材标准规范 Standard Specification for UNS N08020, UNS N08026, and UNS N08024 Alloy Plate, Sheet, and Strip
ASTM B 464-2005 焊接的UNS NO8020、NO8024和NO8026合金管的标准规范 Standard Specification for Welded UNS N08020, N08024, and N08026 Alloy Pipe
ASTM B 465-2004 铜铁合金板、薄板、带材和轧制棒材标准规范 Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
ASTM B 466-1998 无缝铜镍合金管 Seamless Copper-Nickel Pipe and Tube
ASTM B 468-2004 焊接的UNS N08020、N08024和N08026合金管标准规范 Standard Specification for Welded UNS N08020, N08024, and N08026 Alloy Tubes
ASTM B 469-1994 压力设备用无缝铜合金管 Seamless Copper Alloy Tubes for Pressure Applications
ASTM B 471-1993 UNS NO8020、UNS NO8026和UNS NO8024镍合金弹簧丝 UNS N08020, UNS N08026 and UNS N08024 Nickel Alloy Spring Wire
ASTM B 472a-2004 镍合金坯锭和再锻用棒材的标准规范 Standard Specification for Nickel Alloy Billets and Bars for Reforging
ASTM B 473-2007 UNS N08020、UNS N08024和UNS N08026镍合金棒材和线材的标准规范 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire
ASTM B 475-2007 UNS N08020、UNS N08024和UNS N08026镍合金圆编织线的标准规范 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Round Weaving Wire
ASTM B 477-1997 金银镍电触点合金标准规范 Standard Specification for Gold-Silver-Nickel Electrical Contact Alloy
ASTM B 479-2006 与食品接触的和其它用途的挠性包装材料用退火铝及铝合金箔标准规范 Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications
ASTM B 480-1988 电镀用镁和镁合金制备的标准指南 Standard Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating
ASTM B 481-1968 电镀用钛和钛合金的制备 Preparation of Titanium and Titanium Alloys for Electroplating
ASTM B 482-1985 电镀用钨和钨合金的制备 Preparation of Tungsten and Tungsten Alloys for Electroplating
ASTM B 483-1995 普通拉制铝及铝合金管 Aluminum and Aluminum-Alloy Drawn Tubes for General Purpose Applications
ASTM B 483/B 483M-2003 通用铝和铝合金拉制管的标准规范 Standard Specification for Aluminum and Aluminum-Alloy Drawn Tubes for General Purpose Applications
ASTM B 491/B 491M-2006 通用铝和铝合金挤制圆管的标准规范 Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications
ASTM B 493-1983 锆及锆合金锻件 Zirconium and Zirconium Alloy Forgings
ASTM B 495-2005 锆及锆合金铸锭的标准规范 Standard Specification for Zirconium and Zirconium Alloy Ingots
ASTM B 505/B 505M-2007 铜合金连续浇铸件的标准规范 Standard Specification for Copper Alloy Continuous Castings
ASTM B 511-2001 镍铁铬硅合金棒和型材标准规范 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes
ASTM B 512-2004 镍铬硅合金坯料和棒材标准规范 Standard Specification for Nickel-Chromium-Silicon Alloy (UNS N08330) Billets and Bars
ASTM B 514-2005 焊接的镍铁铬合金管标准规范 Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe
ASTM B 515-1995 焊接的UNS N08120、UNS NO8800、UNS N08810和UNS NO8811合金管标准规范 Standard Specification for Welded UNS N08120, UNS N08800, UNS N08810, and UNS N08811 Alloy Tubes
ASTM B 516-2003 焊接的镍铬铁合金(UNS N06600、UNS N06603、UNS N06025和UNS N06045)管标准规范 Standard Specification for Welded Nickel-Chromium-Iron Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045 Tubes)
ASTM B 517-2005 焊接镍铬铁合金(UNS N06600、UNS N06603、UNS N06025和UNS N06045)管的标准规范 Standard Specification for Welded Nickel-Chromium-Iron-Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045) Pipe
ASTM B 521-1998 钽和钽合金无缝和焊接管标准规范 Standard Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes
ASTM B 522-2001 金银铂电接触合金标准规范 Standard Specification for Gold-Silver-Platinum Electrical Contact Alloy
ASTM B 523/B 523M-2007 无缝和焊接锆及锆合金管的标准规范 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes
ASTM B 524/B 524M-1999 铝合金芯加强的同心绞捻铝导线标准规范 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201)
ASTM B 535-2006 镍铁铬硅合金(UNS N08330和N08332)无缝管道和管用标准规范 Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube
ASTM B 536-2007 镍-铁-铬-硅合金(UNS N08330和N08332)厚板材、薄板材和带材的标准规范 Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip
ASTM B 540-1997 电触点用钯合金标准规范 Standard Specification for Palladium Electrical Contact Alloy
ASTM B 541-2001 电接触用金合金标准规范 Standard Specification for Gold Electrical Contact Alloy
ASTM B 546-2004 电熔焊接镍铬钴钼合金(UNS N06617)、镍铁铬硅合金(UNS N08330和UNS N08332)、镍铬铁铝合金(UNS N06603)、镍 Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe
ASTM B 547/B 547M-2002 成形的和电弧焊接的铝及铝合金圆管标准规范 Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube
ASTM B 548-2003 压力容器用铝合金板的超声波检验的标准试验方法 Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels
ASTM B 550/B 550M-2007 锆和锆合金棒材及线材的标准规范 Standard Specification for Zirconium and Zirconium Alloy Bar and Wire
ASTM B 551/B 551M-2007 锆和锆合金带材、薄板材和厚板材的标准规范 Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate
ASTM B 557-2006 锻造和铸造的铝及镁合金制品的抗拉试验的标准试验方法 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
ASTM B 557M-2007 锻造和铸造铝合金和镁合金制品的抗拉测试的标准试验方法(米制) Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products [Metric]
ASTM B 558-1979 电镀用镍合金的制备 Preparation of Nickel Alloys for Electroplating
ASTM B 560-2000 新的锡铅合金的标准规范 Standard Specification for Modern Pewter Alloys
ASTM B 563-2001 电接触用钯银铜合金标准规范 Standard Specification for Palladium-Silver-Copper Electrical Contact Alloy
ASTM B 564a-2006 镍合金锻件用标准规范 Standard Specification for Nickel Alloy Forgings
ASTM B 565-2004 铝和铝合金铆钉及冷镦头丝与棒材的剪切试验的标准试验方法 Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
ASTM B 570-2006 (UNS Nos. C17000和C17200)铜-铍合金锻件和挤压件的标准规范 Standard Specification for Copper-Beryllium Alloy (UNS Nos. C17000 and C17200) Forgings and Extrusions
ASTM B 573-2006 镍钼铬铁合金(UNS N10003、N10242)棒材标准规范 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242)* Rod
ASTM B 574-2006 低碳镍钼铬、低碳镍铬钼、低碳镍钼铬钽、低碳镍铬钼铜和低碳镍铬钼钨合金杆标准规范 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod
ASTM B 575-2006 低碳镍铬钼、低碳镍铬钼铜、低碳镍铬钼钽和低碳镍铬钼钨合金板、薄板及带材的标准规范 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Plate, Sheet, and Strip
ASTM B 579-1973 锡铅合金的电解沉积镀层(焊接板) Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate)
ASTM B 581-2002 镍铬铁钼铜合金棒标准规范 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod
ASTM B 582-2002 镍铬铁钼铜合金板、薄板及带材标准规范 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip
ASTM B 584a-2006 一般用途铜合金砂型铸造件的标准规范 Standard Specification for Copper Alloy Sand Castings for General Applications
ASTM B 591-2004 铜锌锡和铜锌锡铁镍合金板、薄板、带材及轧制的棒材标准规范 Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar
ASTM B 592-2001 铜锌铝钴合金、铜锌锡铁板、薄板、带材及轧制的棒材标准规范 Standard Specification for Copper-Zinc-aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
ASTM B 593-1996 铜合金弹簧材料弯曲疲劳试验的标准试验方法 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM B 594-2006 航空设备用铝合金锻制品超声波检验的标准实施规程 Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications
ASTM B 596-1989 金铜合金电接触材料标准规范 Standard Specification for Gold-Copper Alloy Electrical Contact Material
ASTM B 598-1998 抗拉试验中确定铜合金偏置屈服强度的标准实施规程 Standard Practice for Determining Offset Yield Strength in Tension for Copper Alloys
ASTM B 599-1992 镍铁铬钼钶稳定合金板、薄板及带材标准规范 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip
ASTM B 600-1991 钛及钛合金表面的去垢和清洗 Descaling and Cleaning Titanium and Titanium Alloy Surfaces
ASTM B 601-2007 铜和铜合金用回火标志的标准分类.锻造和铸造 Standard Classification for Temper Designations for Copper and Copper Alloys - Wrought and Cast
ASTM B 603-2007 电热元件用拉制或轧制铁-铬-铝合金的标准规范 Standard Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements
ASTM B 605a-1995 锡镍合金电解沉积镀层标准规范 Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy
ASTM B 606-2002 钢芯铝和铝合金导线用高强度镀锌(电镀)钢芯线的标准规范 Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced
ASTM B 611-1985 硬质合金的耐磨性的试验方法 Test Method for Abrasive Wear Resistance of Cemented Carbides
ASTM B 614-2005 锆及锆合金表面的除垢和清洗的标准实施规程 Standard Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces
ASTM B 617-1998 电触点货币银合金标准规范 Standard Specification for Coin Silver Electrical Contact Alloy
ASTM B 619-2006 焊接的镍和镍钴合金管的标准规范 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe
ASTM B 620-2003 镍铁铬钼合金板、薄板及带材标准规范 Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate, Sheet, and Strip
ASTM B 621-2002 镍铁铬钼合金棒材标准规范 Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod
ASTM B 622-2006 无缝镍和镍钴合金管的标准规范 Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube
ASTM B 624-2007 电子用高强度高传导率铜合金线的标准规范 Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application
ASTM B 626-2006 焊接镍和镍钴合金管标准规范 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube
ASTM B 628-1998 银铜低共熔电触头合金标准规范 Standard Specification for Silver-Copper Eutectic Electrical Contact Alloy
ASTM B 629-1977 电镀用钼和钼合金的制备 Preparation of Molybdenum and Molybdenum Alloys for Electroplating
ASTM B 632/B 632M-2002 铝合金轧制支撑板标准规范 Standard Specification for Aluminum-Alloy Rolled Tread Plate
ASTM B 637-2006 高温设备用淀积硬化镍合金棒材、锻件和锻坯的标准规范 Standard Specification for Precipitation-Hardening Nickel Alloy Bars, Forgings, and Forging Stock for High-Temperature Service
ASTM B 639-2002 高温用沉积硬化钴(UNS R30155 和 UNS R30816)合金条材、棒材、锻件和锻造坯定的标准规范 Standard Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service
ASTM B 643-2000 铜铍合金无缝管标准规范 Standard Specification for Copper-Beryllium Alloy Seamless Tube
ASTM B 644-2005 铜合金添加剂的标准规范 Standard Specification for Copper Alloy Addition Agents
ASTM B 645-2007 铝合金线性弹性平面应变断裂韧性测试的标准实施规程 Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys
ASTM B 646a-2006 铝合金断裂韧性试验的标准实施规程 Standard Practice for Fracture Toughness Testing of Aluminum Alloys
ASTM B 647-1984 用维氏硬度仪测定铝合金压痕硬度的试验方法 Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
ASTM B 648-1978 用巴氏压痕仪测定铝合金压痕硬度的标准试验方法 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM B 649-2006 镍铁铬钼铜氮低碳合金(UNS N08925、UNS N08031、UNS N08354和UNS N08926)、铬镍铁氮低碳合金(UNS R20033)棒 Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire
ASTM B 652/B 652M-2004 铌铪合金铸锭标准规范 Standard Specification for Niobium-Hafnium Alloy Ingots
ASTM B 653/B 653M-2006 无缝和焊接锆和锆合金焊接配件的标准规范 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings
ASTM B 654/B 654M-2004 铌铪合金箔、薄板材、带材和板材的标准规范 Standard Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate
ASTM B 655/B 655M-2004 铌铪合金棒材、杆材和线材标准规范 Standard Specification for Niobium-Hafnium Alloy Bar, Rod, and Wire
ASTM B 657-2005 硬质合金中微观结构金相鉴定指南 Guide for Metallographic Identification of Microstructure in Cemented Carbides
ASTM B 658/B 658M-2006 无缝和焊接锆和锆合金管标准规范 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe
ASTM B 661-2006 镁合金的热处理标准实施规范 Standard Practice for Heat Treatment of Magnesium Alloys
ASTM B 663-1994 银钨硬质合金电触点材料标准规范 Standard Specification for Silver-Tungsten Carbide Electrical Contact Material
ASTM B 670-2002 高温设备用沉淀淬火镍合金(UNS N07718) 厚板、薄板及带材的标准规范 Standard Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service
ASTM B 672-2002 镍铁铬钼铌稳定合金(UNS N08700)棒材及线材的标准规范 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire
ASTM B 690-2002 铁镍铬钼合金无缝管标准规范 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube
ASTM B 691-2002 铁镍铬钼合金杆材、棒材及线材标准规范 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod, Bar, and Wire
ASTM B 694-2003 电缆护套用铜、铜合金、包铜青铜和包铜不锈钢薄板和带材标准规范 Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding
ASTM B 698-2002 无缝铜和铜合金管和管道的标准分类 Standard Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube
ASTM B 704-2003 焊接UNS N06625、UNS N06219和UNS N08825合金管标准规范 Standard Specification for Welded UNS N06625, UNS N06219 and UNS N08825 Alloy Tubes
ASTM B 705-2005 镍合金(UNS N06625、N06219和N08825)焊接管的标准规范 Standard Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe
ASTM B 706-2000 无缝铜合金管标准规范 Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube
ASTM B 708-2005 钽和钽合金板、薄板和带材标准规范 Standard Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip
ASTM B 709-2004 铁镍铬钼合金板、薄板和带材标准规范 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028)* Plate, Sheet, and Strip
ASTM B 710-2004 镍铁铬硅合金焊接管标准规范 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Pipe
ASTM B 711-2005 同心绞捻铝合金钢芯导线(AACSR)(6201)的标准规范 Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors, Steel Reinforced (AACSR) (6201)
ASTM B 718-2000 镍铬钼钴钨铁硅合金板,薄板和带材的标准规范 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip
ASTM B 719-2000 镍铬钼钴钨铁硅合金(UNS N06333)棒标准规范 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar
ASTM B 722-2006 镍-铬-钼-钴-钨-铁硅合金(UNS N06333)无缝管道和管标准规范 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube
ASTM B 723-2000 镍铬钼钴钨铁硅合金焊接管的标准规范 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Pipe
ASTM B 724-2000 用新式轻便非卡尺型仪器测量铝合金压痕硬度的标准试验方法 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, Non-Caliper-Type Instrument
ASTM B 725-2005 镍(UNS N02200/UNS N02201)和镍合金(UNS N04400)焊接管的标准规范 Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Pipe
ASTM B 726-2002 镍铬钼钴钨铁硅合金(UNS N06333)焊接管的标准规范 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube
ASTM B 729-2005 无缝UNS N08020、UNS NO8026和UNS NO8024镍合金管的标准规范 Standard Specification for Seamless UNS N08020, UNS N08026, and UNS N08024 Nickel-Alloy Pipe and Tube
ASTM B 736-2000 铝、铝合金和铝包层钢电缆屏蔽材料标准规范 Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock
ASTM B 739-2003 钼铁铬硅合金焊接管标准规范 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Tube
ASTM B 740-2002 铜镍锡旋节合金带材的标准规范 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Strip
ASTM B 744/B 744M-2005 波纹铝管用铝合金薄板的标准规范 Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe
ASTM B 746/B 746M-2002 现场栓接管、管拱和拱用波纹铝合金结构板的标准规范 Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
ASTM B 749-2003 铅和铅合金带材、薄板和板材产品标准规范 Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products
ASTM B 750-2007 热浸涂层用锭铁模型中GALFAN(锌-5%铝-含铈稀土)合金的标准规范 Standard Specification for GALFAN (Zinc-5 % Aluminum-Mischmetal) Alloy in Ingot Form for Hot-Dip Coatings
ASTM B 751-2003 镍和镍合金焊接管一般要求的标准规范 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube
ASTM B 753-2007 恒温器组件合金的标准规范 Standard Specification for Thermostat Component Alloys
ASTM B 754-1989 铜及铜合金带材平面偏差的测量和记录的测试方法 Standard Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip
ASTM B 755-2000 镍铬钼钨合金板、薄板和带材标准规范 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip
ASTM B 756-2000 镍铬钼钨合金(UNS N06110)棒材和杆材标准规范 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06110) Rod and Bar
ASTM B 757-2000 镍铬钼钨合金焊接管标准规范 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe
ASTM B 758-2000 镍铬钼钨合金焊接管标准规范 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube
ASTM B 759-2000 镍铬钼钨合金管标准规范 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube
ASTM B 76-1990 电加热用镍铬和镍铬铁合金的加速寿命的试验方法 Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating
ASTM B 763-2004 阀门用铜合金砂型铸件标准规范 Standard Specification for Copper Alloy Sand Castings for Valve Applications
ASTM B 768-1999 铜钴铍合金和铜镍铍合金带材和板材标准规范 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet
ASTM B 769-2007 铝合金的剪切测试用标准试验方法 Standard Test Method for Shear Testing of Aluminum Alloys
ASTM B 77-2007 电阻合金的热电功率用标准试验方法 Standard Test Method for Thermoelectric Power of Electrical-Resistance Alloys
ASTM B 770-2005 通用铜铍合金砂型铸件的标准规范 Standard Specification for Copper-Beryllium Alloy Sand Castings for General Applications
ASTM B 771-1987 硬质合金短杆断裂韧度的试验方法 Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides
ASTM B 774-2000 低熔点合金的标准规范 Standard Specification for Low Melting Point Alloys
ASTM B 775-2002 镍和镍合金焊接管一般要求的标准规范 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe
ASTM B 776-2007 铪和铪合金带材、薄板材和厚板材的标准规范 Standard Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate
ASTM B 78-1990 电加热用铁铬铝合金的加速寿命的试验方法 Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
ASTM B 780-1998 含银75%、铜24.5%及镍0.5%的电触点合金标准规范 Standard Specification for 75% Silver, 24.5% Copper, 0.5% Nickel Electrical Contact Alloy
ASTM B 792-2001 空壳铸造用铸模中的锌合金锭标准规范 Standard Specification for Zinc Alloys in Ingot Form for Slush Casting
ASTM B 793-2003 薄板金属成型压模和塑料注模用锌铸造合金锭标准规范 Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
ASTM B 795-1993 确定粉末锻钢部件中合金和非合金铁杂质百分比的标准试验方法 Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (P/F) Steel Parts
ASTM B 796-2002 低合金粉末锻钢部件的非金属杂质含量的标准测试方法 Standard Test Method for Nonmetallic Inclusion Content of Powders Intended for Powder Forging (P/F) Applications
ASTM B 80-2007 镁合金沙铸件的标准规范 Standard Specification for Magnesium-Alloy Sand Castings
ASTM B 800-2005 电气用退火及中温回火8000系列铝合金线的标准规范 Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes-Annealed and Intermediate Tempers
ASTM B 802/B 802M-2002 钢芯铝导线(ASCR)用涂覆锌-5%铝-混合稀土合金钢芯线的标准规范 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)
ASTM B 803-2002 钢芯铝和铝合金导线用涂覆高强度锌-5%铝-混合稀土合金钢芯线的标准规范 Standard Specification for High-Strength Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced
ASTM B 805-2006 淀积硬化镍合金钢棒和钢丝的标准规范 Standard Specification for Precipitation Hardening Nickel Alloys Bar and Wire
ASTM B 806-2006 通用铜合金永久铸模铸件的标准规范 Standard Specification for Copper Alloy Permanent Mold Castings for General Applications
ASTM B 807/B 807M-2006 铝合金用挤压溶液热处理的标准实施规范 Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys
ASTM B 811-2002 核反应堆燃料包壳用锻制锆合金无缝管的标准规范 Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding
ASTM B 813-2000 铜和铜合金管钎焊用液体和软膏状助溶剂的标准规范 Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube
ASTM B 814-2006 镍-铬-铁-钼-钨合金(UNS N06920)厚板材、薄板材和带材标准规范 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet, and Strip
ASTM B 815-2002 钴铬镍钼钨合金杆标准规范 Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod
ASTM B 817-2003 粉末冶金(P/M)钛合金结构元件标准规范 Standard Specification for Powder Metallurgy (P/M) Titanium Alloy Structural Components
ASTM B 818-2003 钴铬镍钼钨合金板、薄板和带材标准规范 Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate, Sheet and Strip
ASTM B 820-2004 铜和铜合金带材可成型性测定用弯曲试验的标准试验方法 Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip
ASTM B 824-2004 铜合金铸件一般要求的标准规范 Standard Specification for General Requirements for Copper Alloy Castings
ASTM B 828-2002 用铜、铜合金管和配件钎焊制作毛细管接缝的标准实施规程 Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings
ASTM B 829a-2004 镍和镍合金无缝管的一般要求的标准规范 Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube
ASTM B 831-2005 薄铝合金制品剪切试验的标准试验方法 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
ASTM B 833-2006 钢材防腐蚀用热喷镀(金属化)的锌和锌合金金属丝标准规范 Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of Steel
ASTM B 834-1995 压力强化粉末冶金铁镍铬钼和镍铬钼钶(Nb)合金管法兰、管配件、阀门和零件标准规范 Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves, and Parts
ASTM B 84-2007 精密电阻器用合金丝温度电阻常数的标准试验方法 Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
ASTM B 840-1999 锌钴合金沉积物用电解镀层标准规范 Standard Specification for Electrodeposited Coatings for Zinc Cobalt Alloy Deposits
ASTM B 841-1999 锌镍合金沉积物用电解镀层标准规范 Standard Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits
ASTM B 842-1999 锌铁合金沉积物用电解镀层标准规范 Standard Specification for Electrodeposited Coatings for Zinc Iron Alloy Deposits
ASTM B 843-2007 阴极保护用镁合金阳极的标准规范 Standard Specification for Magnesium Alloy Anodes for Cathodic Protection
ASTM B 846a-2006 铜和铜合金的标准术语 Standard Terminology for Copper and Copper Alloys
ASTM B 85-2003 铝合金压模铸件标准规范 Standard Specification for Aluminum-Alloy Die Castings
ASTM B 852-2007 薄钢板热浸镀锌用连续镀锌级(CGG)锌合金的标准规范 Standard Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of Sheet Steel
ASTM B 858-2006 用氨蒸气试验测定铜合金对应力腐蚀裂纹敏感度的标准试验方法 Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys
ASTM B 86-2006 锌及锌铝(ZA)合金铸件和压铸件的标准规范 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
ASTM B 860-2007 热浸镀锌用锌主合金的标准规范 Standard Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing
ASTM B 861a-2006 钛和钛合金无缝钢管的标准规范 Standard Specification for Titanium and Titanium Alloy Seamless Pipe
ASTM B 862b-2006 钛和钛合金焊接管道的标准规范 Standard Specification for Titanium and Titanium Alloy Welded Pipe
ASTM B 863a-2006 钛和钛合金丝的标准规范 Standard Specification for Titanium and Titanium Alloy Wire
ASTM B 865-2004 沉淀硬化镍铜铝合金(UNS N05500)棒材、杆材、线材、锻件和锻坯的标准规范 Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock
ASTM B 870-2002 铜铍合金锻制和挤制合金的标准规范 Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys (UNS Nos. C17500 and C17510)
ASTM B 871-2001 铝合金产品撕裂测试的标准试验方法 Standard Test Method for Tear Testing of Aluminum Alloy Products
ASTM B 872-2006 淀积硬化镍合金金属板、薄板和带材的标准规范 Standard Specification for Precipitation-Hardening Nickel Alloys Plate, Sheet, and Strip
ASTM B 879-1997 镁和镁合金上非电解质转换涂层的标准规范 Standard Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys
ASTM B 880-2003 镍、镍合金及钴合金的化学检验分析限值一般要求的标准规范 Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys, and Cobalt Alloys
ASTM B 881-2005 铝和镁合金产品的相关标准术语 Standard Terminology Relating to Aluminum- and Magnesium- Alloy Products
ASTM B 884-2005 用于超导的铌钛合金坯料、棒材和条材的标准规范 Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications
ASTM B 888-2006 电连接器或弹簧触点生产用铜合金带材的标准规范 Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts
ASTM B 890-2007 用X射线荧光光谱法测定钨合金和钨硬金属的金属成分用标准试验方法 Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
ASTM B 891-1998 带集成散热片的无缝和焊接钛及钛合金冷凝器和热交换器管的标准规范 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes With Integral Fins
ASTM B 892-2003 压模铸造用锌铜铝合金锭标准规范 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy in Ingot Form for Die Castings
ASTM B 894-2003 锌铜铝合金压铸件标准规范 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy Die Castings
ASTM B 897-2003 锌及锌合金大铸锭和坯锭的外形标准规范 Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo and Block Ingot
ASTM B 899-2006 有色金属和合金的相关标准术语 Standard Terminology Relating to Non-ferrous Metals and Alloys
ASTM B 90/B 90M-2007 镁合金薄板材和板材的标准规范 Standard Specification for Magnesium-Alloy Sheet and Plate
ASTM B 900-2004 美国政府机构用铜和铜合金轧制品包装的标准实施规程 Standard Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies
ASTM B 906-2002 压延镍和镍合金板材、薄板和带材的一般要求的标准规范 Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip
ASTM B 908-2003 锌合金铸锭的色码使用的标准规程 Standard Practice for the Use of Color Codes for Zinc Casting Alloy Ingot
ASTM B 91-2007 镁合金锻件的标准规范 Standard Specification for Magnesium-Alloy Forgings
ASTM B 914-2003 钢的热浸镀锌中使用的锌及锌合金锭色码的标准规程 Standard Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel
ASTM B 917/B 917M-2007 整个工艺用铝合金铸件热处理的标准实施规程 Standard Practice for Heat Treatment of Aluminum-Alloy Castings from All Processes
ASTM B 918-2001 锻造铝合金的热处理的标准实施规程 Standard Practice for Heat Treatment of Wrought Aluminum Alloys
ASTM B 92/B 92M-2007 再熔炼用非合金镁锭和镁棒的标准规范 Standard Specification for Unalloyed Magnesium Ingot and Stick For Remelting
ASTM B 920-2001 用次氯酸钠液的蒸气测定金属衬底上金和钯合金覆层孔隙度的标准实施规范 Standard Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors of Sodium Hypochlorite Solution
ASTM B 921-2002 铝和铝合金上覆盖的非六价铬层的标准规范 Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys
ASTM B 924-2002 具有整体散热叶片的冷凝器及热交换器用无缝及焊接镍合金管标准规范 Standard Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins
ASTM B 926-2003 用灯标表测定铝及铝合金平箔中气泡的标准方法 Standard Method for Pinhole Determination in Aluminum and Aluminum Alloy Plain Foil by Means of a Light Table
ASTM B 928/B 928M-2007 海上服务和类似环境用高镁铝合金薄板材和板材的标准规范 Standard Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service and Similar Environments
ASTM B 929-2005 铜镍锡旋节合金棒材和杆材的标准规范 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar
ASTM B 93/B 93M-2007 砂型铸件、硬模铸件和压模铸件铸锭用镁合金的标准规范 Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings
ASTM B 930-2003 确定烧结碳化钨(硬质合金)中不规则大颗粒的频度和粒径额定值的标准试验方法 Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM B 932-2004 低碳镍、铬、钼、钆合金板、薄板材和带材的标准规范 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum-Gadolinium Alloy Plate, Sheet, and Strip
ASTM B 936-2004 铜铬铁钛合金板、薄板、带材和轧制棒材的标准规范 Standard Specification for Copper-Chromium-Iron-Titanium Alloy Plate, Sheet, Strip and Rolled Bar
ASTM B 938-2004 铜铍合金锻件和挤制件的标准规范 Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions (UNS Nos. C17500 and C17510)
ASTM B 94-2007 镁合金压模铸件的标准规范 Standard Specification for Magnesium-Alloy Die Castings
ASTM B 941-2005 电工用耐热铝锆合金丝的标准规范 Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes
ASTM B 943-2005 电子设备热喷涂用锌和锌合金线的标准规范 Standard Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications
ASTM B 945-2006 T1、T2、T5、和T10型回火产品的梯度温度成形加工的冷挤压铝合金的标准规范 Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10-Type Tempers
ASTM B 947-2006 铝合金厚板用热轧钢机溶解热处理的标准实施规范 Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate
ASTM B 949-2006 锌和锌合金产品一般要求的标准规范 Standard Specification for General Requirements for Zinc and Zinc Alloy Products
ASTM B 950-2006 铜和铜合金产品规范的编辑程序和格式的标准指南 Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys
ASTM B 951-2007 铸造和锻造非合金镁及镁合金的代码化用标准实施规程 Standard Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and Wrought
ASTM B 952-2007 旋转铸造用锭状锌合金的标准规范 Standard Specification for Zinc Alloys in Ingot Form for Spin Casting
ASTM B 953-2007 光谱化学分析用镁和镁合金取样的标准实施规程 Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis
ASTM B 954-2007 用原子发射光谱法分析镁和镁合金的标准试验方法 Standard Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission Spectrometry
ASTM B 96/B 96M-2006 一般用途和压力容器用铜硅合金板材、薄板、带材和轧制棒材的标准规范 Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels
ASTM B 99/B 99M-2006 一般用途的硅铜合金线材的标准规范 Standard Specification for Copper-Silicon Alloy Wire for General Applications
ASTM C 752-2003 核纯级的银铟镉合金标准规范 Standard Specification for Nuclear-Grade Silver-Indium-Cadmium Alloy
ASTM C 760-1990 核纯级银铟镉合金的化学及光谱化学分析方法 Test Methods for Chemical and Spectrochemical Analysis of Nuclear-Grade Silver-Indium-Cadmium Alloys
ASTM D 1730-2003 涂漆用铝和铝合金表面预处理标准实施规范 Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
ASTM D 1732-2003 涂漆用镁合金表面预处理的标准实施规范 Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting
ASTM D 2201-1999 试验涂料及相关镀覆产品用镀锌和镀锌合金钢板的制备的标准操作规程 Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products
ASTM D 3115-1995 高剪切应力下润滑剂与航空用合金爆炸反应性的标准试验方法 Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear
ASTM D 3185-2006 包括混合物和油的SBR(苯乙烯合金橡胶)的橡胶评估的标准试验方法 Standard Test Methods for Rubber-Evaluation of SBR (Styrene-Butadiene Rubber) Including Mixtures With Oil
ASTM D 4340-1996 在排热条件下发动机冷却剂对铸造铝合金腐蚀性的标准试验方法 Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions
ASTM D 4673-2002 丙烯腈-丁二烯-苯乙烯(ABS)塑料及合金模压和挤压材料的标准分类系统 Standard Classification System for Acrylonitrile-Butadiene-Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials
ASTM D 6208-2007 用恒电流测量铝及其合金的再钝化电位的标准试验方法 Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement
ASTM D 6492-1999 锌及锌/铝合金涂覆钢上六价铬检测的标准实施规程 Standard Practice for Detection of Hexavalent Chromium On Zinc and Zinc/Aluminum Alloy Coated Steel
ASTM D 6865-2004 丙烯氰-苯乙烯-丙烯酸盐和丙烯氰-EPDM-苯乙烯塑料和合金模制和挤压材料的标准分类系统 Standard Classification System for Acrylonitrile-Styrene-Acrylate (ASA) and Acrylonitrile-EPDM-Styrene (AES) Plastics and Alloys Molding and Extrusion Materials
ASTM E 1009-1995 分析碳和低合金钢用光辐射真空分光仪的评估 Standard Practice for Evaluating an Optical Emission Vacuum Spectrometer to Analyze Carbon and Low-Alloy Steel
ASTM E 101-1991 用点对面技术做铝和铝合金光谱分析的试验方法 Test Method for Spectrographic Analysis of Aluminum and Aluminum Alloys by the Point-to-Plane Technique
ASTM E 1019-2003 钢、铁、镍和钴合金中碳、硫、氮和氧含量测定的标准试验方法 Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys
ASTM E 106-1983 铜铍合金的化学分析标准试验方法 Standard Test Methods for Chemical Analysis of Copper-Beryllium Alloys
ASTM E 1158-2004 金属和金属合金生产材料的脉冲纵波超声检验用的标准块的材料选择与制造的标准指南 Standard Guide for Material Selection and Fabrication of Reference Blocks for the Pulsed Longitudinal Wave Ultrasonic Examination of Metal and Metal Alloy Production Material
ASTM E 1159-1998 热电偶材料的标准规范.铂-铑合金和铂 Standard Specification for Thermocouple Materials, Platinum-Rhodium Alloys, and Platinum
ASTM E 118-1989 铜铬合金的化学分析试验方法 Test Methods for Chemical Analysis of Copper-Chromium Alloys
ASTM E 121-1983 铜碲合金的化学分析标准试验方法 Standard Test Methods for Chemical Analysis of Copper-Tellurium Alloys
ASTM E 1251-2007 用原子发射光谱法分析铝和铝合金的标准试验方法 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Atomic Emission Spectrometry
ASTM E 127-2006 超声波标准参考铝合金块的制造及检验标准实施规程 Standard Practice for Fabricating and Checking Aluminum Alloy Ultrasonic Standard Reference Blocks
ASTM E 1277-2002 用ICP发射光谱测定法对锌-5%铝-铈合金作化学分析的标准试验方法 Standard Test Method for Chemical Analysis of Zinc-5% Aluminum-Mischmetal Alloys by ICP Emission Spectrometry
ASTM E 1282-1998 规定金属及其合金的化学成分并选择取样的实际操作与定量分析方法 Standard Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials
ASTM E 129-1974 用粉末技术做热离子镍合金光谱分析的试验方法 Test Method for Spectrographic Analysis of Thermionic Nickel Alloys by the Powder Technique
ASTM E 1306-2007 测定化学成分用电弧溶化法制备金属及合金式样的标准实施规程 Standard Practice for Preparation of Metal and Alloy Samples by Electric Arc Remelting for the Determination of Chemical Composition
ASTM E 1338-1997 计算机化材料特性数据库的金属和合金的识别 Guide for Identification of Metals and Alloys in Computerized Material Property Databases
ASTM E 1339-1990 计算机管理材料性能数据库中铝合金和零件的识别 Identification of Aluminum Alloys and Parts in Computerized Material Property Databases
ASTM E 1409-2005 用惰性气体熔解技术测定钛及钛合金中氧和氮的标准试验方法 Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique
ASTM E 1447-2005 惰性气体熔解热传导/红外检测法测定钛和钛合金中氢的标准试验方法 Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method
ASTM E 1450-2003 液氦中结构合金抗拉试验的标准试验方法 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
ASTM E 1473-2003 镍、钴和耐高温合金化学分析用标准试验方法 Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys
ASTM E 1497-2005 水混合金属加工液的安全使用的标准实施规程 Standard Practice for Safe Use of Water-Miscible Metal Removal Fluids
ASTM E 1552-1993 使用氢等离子体光谱计测定锆和锆合金中铪的标准试验方法 Standard Test Method for Determining Hafnium in Zirconium and Zirconium Alloys Using the D-C Argon Plasma Spectrometer
ASTM E 1615-2005 使用锌铁合金法测定微量铁的标准试验方法 Standard Test Method for Iron in Trace Quantities Using the FerroZine Method
ASTM E 1659-2005 电镀镍锌合金薄钢板的涂层重量和化学分析的标准试验方法 Standard Test Methods Coating Weight and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet
ASTM E 1793-2005 连入泡沫和梁型可移动遮蔽物的铝合金制备的标准实施规程 Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters
ASTM E 1826-2005 铝合金粘结用低挥发性有机化合物耐腐蚀粘合底漆的标准规范 Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded
ASTM E 1834-1996 电热原子吸收光谱法测定镍合金中铅的标准试验方法 Standard Test Method for Determination of Lead in Nickel Alloys by Electrothermal Atomic Absorption Spectrometric Method
ASTM E 1835-1996 火焰原子吸收光谱法分析镍合金的标准试验方法 Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry
ASTM E 1852-1996 用电热原子吸收光谱测定法测定碳和低合金钢中锑低含量的标准试验方法 Standard Test Method for Determination of Low Levels of Antimony in Carbon and Low-Alloy Steel by Electrothermal Atomic Absorption Spectrometry
ASTM E 1916-1997 混合金属的识别和/或分离标准指南 Standard Guide for Identification and/or Segregation of Mixed Lots of Metals
ASTM E 1917-2002 用双氧钒磷钼酸盐分子吸收光谱测定法测定镍、镍铁和镍合金中磷含量的标准试验方法 Standard Test Method for Determination of Phosphorous in Nickel, Ferronickel, and Nickel Alloys by the Phosphovanadomolybdate Molecular Absorption Spectrometric Method
ASTM E 1938-2002 用二安替比林甲烷分子吸收光谱测定法测定镍合金中钛含量的标准试验方法 Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Molecular Absorption Spectrometric Method
ASTM E 1941-2004 高熔点和活性金属及其合金中碳含量测定的标准试验方法 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys
ASTM E 212-1966 用杆对杆技术对碳素钢及低合金钢做光谱分析的方法 Method for Spectrographic Analysis of Carbon and Low-Alloy Steel by the Rod-to-Rod Technique
ASTM E 215-1998 无缝铝合金管的电磁检验用的标准化设备 Standardizing Equipment for Electromagnetic Examination of Seamless Aluminum-Alloy Tube
ASTM E 2371-2004 用原子辐射等离子体光谱测定法分析钛和钛合金的标准试验方法 Standard Test Method for Analysis of Titanium and Titanium Alloys by Atomic Emission Plasma Spectrometry
ASTM E 243-1997 铜及铜合金管的电磁(涡流)检验 Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper and Copper-Alloy Tubes
ASTM E 2465-2006 用X射线荧光光谱测定法分析不锈钢和合金钢的标准试验方法 Standard Test Method for Analysis of Ni-Base Alloys by X-ray Fluorescence Spectrometry
ASTM E 255-2002 化学成分测定用铜和铜合金取样的标准实施规范 Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition
ASTM E 272-1999 高强度铜基和镍铜合金铸件用参考射线照片 Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings
ASTM E 293-1968 用溶解技术测定低合金钢中酸溶性铝的光谱分析试验法 Method for Spectrographic Determination of Acid-Soluble Aluminum in Low-Alloy Steel by the Solution Technique
ASTM E 32-1986 测定化学成分用铁合金及钢添加剂的取样 Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition
ASTM E 322-1996 低合金钢和铸铁的X射线发射光谱测定分析法 Standard Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels and Cast Irons
ASTM E 34-1994 铝和铝基合金化学分析的标准试验方法 Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
ASTM E 340-2000 金属和合金宏观腐蚀的标准试验方法 Standard Test Method for Macroetching Metals and Alloys
ASTM E 35-1988 镁和镁合金的化学分析试验方法 Standard Test Methods for Chemical Analysis of Magnesium and Magnesium Alloys
ASTM E 350-1995 碳素钢、低合金钢、硅电工钢、铁铸锭和熟铁化学分析的标准试验方法 Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron
ASTM E 352-1993 工具钢及其它类似中合金钢和高合金钢化学分析的标准试验方法 Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels
ASTM E 353-1993 不锈钢、耐热钢、马氏体钢和其它类似的铬镍铁合金化学分析的标准试验方法 Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
ASTM E 354-1993 高温钢、电工钢、磁钢和其它类似的铁、镍和钴合金化学分析的标准试验方法 Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys
ASTM E 363-1983 铬和铬铁合金化学分析的标准试验方法 Standard Test Methods for Chemical Analysis of Chromium and Ferrochromium
ASTM E 367-2003 铌铁合金的化学分析标准方法 Standard Methods for Chemical Analysis of Ferroniobium
ASTM E 372-2001 镁硅铁合金中钙和镁的测定用标准试验方法 Standard Test Method for Determination of Calcium and Magnesium in Magnesium Ferrosilicon
ASTM E 407-2007 微蚀金属和合金的标准实施规程 Standard Practice for Microetching Metals and Alloys
ASTM E 415a-1999 碳和低合金钢光辐射真空光谱测定分析的标准试验方法 Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Carbon and Low-Alloy Steel
ASTM E 426-1998 无缝焊接管形产品、奥氏体不锈钢的类似合金的电磁(涡电流)检验 Standard Practice for Electromagnetic (Eddy-Current) Examination of Seamless and Welded Tubular Products, Austenitic Stainless Steel and Similar Alloys
ASTM E 47-1993 锌压铸合金的化学分析试验方法 Test Methods for Chemical Analysis of Zinc Die-Casting Alloys
ASTM E 478-2003 铜合金化学分析的标准试验方法 Standard Test Methods for Chemical Analysis of Copper Alloys
ASTM E 527-2007 统一编号系统(UNS)中金属和合金编号的标准实施规程 Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
ASTM E 53-2002 用重量分析法测定非合金铜中铜含量的标准试验方法 Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry
ASTM E 536-2005 锌和锌合金化学分析的标准试验方法 Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys
ASTM E 539-2007 6铝4钒钛合金的X射线荧光光谱测定分析用标准试验方法 Standard Test Method for X-Ray Fluorescence Spectrometric Analysis of 6Al-4V Titanium Alloy
ASTM E 55-1991 测定化学成分用锻制有色金属及其合金铸件的取样 Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition
ASTM E 571-1998 镍及镍合金管形制品的电磁(涡电流)检验 Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products
ASTM E 572a-2002 用X射线荧光光谱测定法分析不锈钢和合金钢的标准试验方法 Standard Test Method for Analysis of Stainless and Alloy Steels by X-ray Fluorescence Spectrometry
ASTM E 581-2004 锰铜合金化学分析的标准试验方法 Standard Test Methods for Chemical Analysis of Manganese-Copper Alloys
ASTM E 62-1989 铜和铜合金的化学分析标准试验方法(光度测定法) Standard Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods)
ASTM E 634-2005 光发射光谱测定分析用锌和锌合金取样的标准实施规程 Standard Practice for Sampling of Zinc and Zinc Alloys for Optical Emission Spectrometric Analysis
ASTM E 693-2001 根据每个原子(DPA)、E706(ID)位移辨别铁和低合金钢中子照射特性的标准实施规程 Standard Practice for Characterizing Neutron Exposures in Iron and Low Alloy Steels in Terms of Displacements Per Atom (DPA), E 706(ID)
ASTM E 696-2007 钨-铼合金热电偶丝的标准规范 Standard Specification for Tungsten-Rhenium Alloy Thermocouple Wire
ASTM E 716-1994 光谱化学分析用铝和铝合金取样 Standard Practices for Sampling Aluminum and Aluminum Alloys for Spectrochemical Analysis
ASTM E 75-1976 铜镍及铜镍锌合金的化学分析试验方法 Test Methods for Chemical Analysis of Copper-Nickel and Copper-Nickel-Zinc Alloys
ASTM E 864-2003 蜂窝状保护板中要用粘合剂粘结的铝合金表面准备的标准实施规范 Standard Practice for Surface Preparation of Aluminum Alloys to be Adhesively Bonded in Honeycomb Shelter Panels
ASTM E 866-2005 蜂窝状保护板中粘结铝合金用耐腐蚀粘合底漆的标准规范 Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
ASTM E 88-1991 测定化学成分用有色金属及其合金铸件的取样 Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition
ASTM E 963-1995 用盐酸甲烷电解质从镍和镍铁积超热合金中进行相位的电解提取 Standard Practice for Electrolytic Extraction of Phases from Ni and Ni-Fe Base Superalloys Using a Hydrochloric-Methanol Electrolyte
ASTM F 1058-1997 外科植入物用煅制钴-铬-镍-钼-铁合金 Standard Specification for Wrought Cobalt-Chromium-Nickel-Molybdenum-Iron Alloy for Surgical Implant Applications
ASTM F 1108-2004 外科植入物用Ti6Al4V合金铸件的标准规范 Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406)
ASTM F 1108a-1997 外科移植用Ti6Al4V合金铸件(UNS R56406)标准规范 Standard Specification for Ti6Al4V Alloy Castings for Surgical Implants (UNS R56406)
ASTM F 1182-1990 阳极,镀锌合金 Standard Specification for Anodes, Sacrificial Zinc Alloy
ASTM F 1183-1996 铝合金链环栅栏结构 Standard Specification for Aluminum Alloy Chain Link Fence Fabric
ASTM F 1295-2005 外科植入设备用锻制钛-6铝-7铌合金的标准规范 Standard Specification for Wrought Titanium-6 Aluminum-7 Niobium Alloy for Surgical Implant Applications (UNS R56700)
ASTM F 1345-1996 锌-5%铝-铈合金涂覆钢连接链环栏栅结构 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric
ASTM F 136a-2002 外科植入设备用锻制钛6和铝4钒特低杂质合金的标准规范(UNS R56401) Standard Specification for Wrought Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401)
ASTM F 1466-1999 金属与陶瓷密封用铁镍钴合金的标准规范 Standard Specification for Iron-Nickel-Cobalt Alloys for Metal-to-Ceramic Sealing Applications
ASTM F 1472a-2002 外科植入设备用锻制钛6铝4钒合金的标准规范(UNS R56400) Standard Specification for Wrought Titanium -6Aluminum -4Vanadium Alloy for Surgical Implant Applications (UNS R56400)
ASTM F 15-2004 铁-镍-钴密封合金的标准规范 Standard Specification for Iron-Nickel-Cobalt Sealing Alloy
ASTM F 1513-1999 电子薄膜器件用纯铝(非合金)原材料标准规范 Standard Specification for Pure Aluminum (Unalloyed) Source Material for Electronic Thin Film Applications
ASTM F 1537-2007 外科植入物用钴-28铬-6钼合金的标准规范(UNS R31537、UNS R31538和UNS R31539) Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539)
ASTM F 1545-1997 有塑料内衬的铁合金管、配件和法兰的标准规范 Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges
ASTM F 1580-2001 外科植入物涂敷用钛及钛-6铝-4钒合金粉末的标准规范 Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants
ASTM F 1684-2006 低热膨胀用铁-镍和铁-镍-钴合金的标准规范 Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications
ASTM F 1713-2003 外科植入物用锻制钛-13铌-13锆合金的标准规范 Standard Specification for Wrought Titanium-13Niobium-13Zirconium Alloy for Surgical Implant Applications
ASTM F 1813-2006 外科植入物用锻压的钛-12钼-6锆-2铁合金(UNS R58120)的标准规范 Standard Specification for Wrought Titanium-12 Molybdenum-6 Zirconium-2 Iron Alloy for Surgical Implant (UNS R58120)
ASTM F 2004-2005 用热分析法测定镍-钛合金转变温度的标准试验方法 Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis
ASTM F 2005-2005 镍-钛型记忆合金的标准术语 Standard Terminology for Nickel-Titanium Shape Memory Alloys
ASTM F 2063-2005 医疗器械和外科植入物用锻造镍钛形状记忆合金标准规范 Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants
ASTM F 2066-2007 外科植入物用锻制钛-15钼合金的标准规范(UNS R58150) Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150)
ASTM F 2082-2006 通过弯曲和自由回复试验测定镍钛形状记忆合金转变温度的标准试验方法 Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery
ASTM F 2146-2007 外科移植物用锻造钛-3铝-2.5钒合金无缝管的标准规范(UNS R56320) Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320)
ASTM F 2229-2007 外科植入物用锻制氮增强23锰-21铬-1钼低镍不锈钢合金棒材和线材的标准规范(UNS S29108) Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108)
ASTM F 2281-2004 耐热及高温设备用不锈钢和镍合金螺栓、六角头螺钉和螺柱的标准规范 Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications
ASTM F 2282-2003 机械紧固件用碳钢和合金钢丝、杆材、棒材的质量保证要求的标准规范 Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners
ASTM F 2329-2005 碳钢和合金钢螺栓、螺钉、垫圈、螺母和特殊螺纹紧固件用热浸镀锌覆层的标准规范 Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners
ASTM F 2384-2005 用于外科植入物的锻造锆-2.5铌合金的标准规范 Standard Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901)
ASTM F 2437-2006 与螺旋帽、螺栓、锚和螺柱用碳和合金钢可压缩垫圈式直读张力指示器的标准规范 Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs
ASTM F 2527-2005 外科植入物用锻造无缝和焊接及拉制的钴合金小直径管的标准规范(UNS R30003、 UNS R30008、 UNS R30035、 U Standard Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing for Surgical Implants (UNS R30003, UNS R30008, UNS R30035, UNS R30605, and UNS R31537)
ASTM F 256-2005 含有18%或26%铬的铬铁焊接用合金的标准规范 Standard Specification for Chromium-Iron Sealing Alloys with 18 or 28 Percent Chromium
ASTM F 2581-2007 外科植入物用锻制氮增强的11锰-17铬-3钼低镍不锈钢合金棒材和金属丝的标准规范 Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225)
ASTM F 2633-2007 医疗设备和外科植入物用可锻无缝镍钛形状记忆合金管标准规范 Standard Specification for Wrought Seamless Nickel-Titanium Shape Memory Alloy Tube for Medical Devices and Surgical Implants
ASTM F 30-1996 铁镍密封合金标准规范 Standard Specification for Iron-Nickel Sealing Alloys
ASTM F 31-2005 42%镍6%铬铁焊接用合金的标准规范 Standard Specification for 42% Nickel-6% Chromium-Iron Sealing Alloy
ASTM F 541-2004 合金钢有眼螺栓的标准规范 Standard Specification for Alloy Steel Eyebolts
ASTM F 560-2007 外科植入物用非合金钽的标准规范(UNS R05200、UNS R05400) Standard Specification for Unalloyed Tantalum for Surgical Implant Applications (UNS R05200, UNS R05400)
ASTM F 562-2007 外科植入用锻制35钴-35镍-20铬-10钼合金标准规范(UNS R30035) Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035)
ASTM F 568M-2004 碳素和合金钢外螺纹米制紧固件标准规范 Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners
ASTM F 620-2006 外科植入用α加β钛合金锻件的标准规范 Standard Specification for Alpha Plus Beta Titanium Alloy Forgings for Surgical Implants
ASTM F 67-2006 外科植入用非合金钛(UNS R50250、UNS R50400、UNS R50550、UNS R50700)标准规范 Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700)
ASTM F 688-2005 外科植入物用锻制钴35镍20铬10钼合金板、薄板及箔标准规范 Standard Specification for Wrought Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Plate, Sheet, and Foil for Surgical Implants (UNS R30035)
ASTM F 73-1996 电子器件及灯泡用钨铼合金丝 Standard Specification for Tungsten-Rhenium Alloy Wire for Electron Devices and Lamps
ASTM F 75-2007 外科植入术用钴28铬6钼铸件和铸造合金的标准规范 Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075)
ASTM F 799-2006 外科移植物用钴28铬6钼合金锻件(UNS R31537、R31538、R31539)标准规范 Standard Specification for Cobalt-28Chromium-6Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539)
ASTM F 835-2004 合金钢凹半圆头及平顶沉头六角螺钉的标准规范 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws
ASTM F 835M-2004 合金钢凹半圆头及平顶沉头六角螺钉(米制)标准规范 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws [Metric]
ASTM F 90-2007 外科植入物用锻造钴-20铬-15钨-10镍合金的标准规范 Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605)
ASTM F 912-2004 合金钢凹头定位螺钉的标准规范 Standard Specification for Alloy Steel Socket Set Screws
ASTM F 912M-2004 合金钢凹头定位螺钉(米制)的标准规范 Standard Specification for Alloy Steel Socket Set Screws [Metric]
ASTM F 945-2006 航空发动机清洗材料对钛合金的应力腐蚀标准试验方法 Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials
ASTM F 96-1977 锻制的铜和镍电子级合金 Electronic Grade Alloys of Copper and Nickel in Wrought Forms
ASTM F 961-2003 外科植入物用钴镍铬钼合金锻件标准规范 Standard Specification for Cobalt-35 Nickel-20 Chromium-10 Molybdenum Alloy Forgings for Surgical Implants [UNS R30035]
ASTM G 101-2004 低合金钢耐大气腐蚀评估的标准指南 Standard Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels
ASTM G 103-1997 在6%沸腾的氯化钠溶液中进行铝锌镁低铜合金的应力腐蚀断裂试验的标准实施规程 Standard Practice for Evaluating Stress-Corrosion Cracking Resistance of Low Copper 7XXX Series Al-Zn-Mg-Cu Alloys in Boiling 6% Sodium Chloride Solution
ASTM G 110-1992 将铝合金浸入氯化钠和过氧化氢溶液中进行热处理时抗晶粒间腐蚀的评定 Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution
ASTM G 112-1992 进行铝合金的剥离腐蚀试验 Conducting Exfoliation Corrosion Tests in Aluminum Alloys
ASTM G 123-2000 沸腾酸化氯化钠溶液中不同镍合量不锈钢合金应力腐蚀裂纹评定的标准试验方法 Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution
ASTM G 139-2005 用破坏载荷法测定可热处理铝合金制品的抗应力腐蚀开裂特性的标准试验方法 Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method
ASTM G 146-2001 高压、高温精炼氢设备中使用的双金属不锈合金/钢板材非连接性评定的标准实施规程 Standard Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure, High-Temperature Refinery Hydrogen Service
ASTM G 157-1998 评价化学加工工业用煅铁和镍基抗腐蚀合金腐蚀特性的标准指南 Standard Guide for Evaluating the Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for the Chemical Process Industries
ASTM G 186-2005 测定气漏检测器液体溶剂是否能引起黄铜合金应力腐蚀断裂的标准试验方法 Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys
ASTM G 188-2005 黄铜和其他铜合金用检漏仪溶液的标准规范 Standard Specification for Leak Detector Solutions Intended for Use on Brasses and Other Copper Alloys
ASTM G 2/G 2M-2006 在750°F蒸汽中或在680°F水中锆、铪及其合金产品的腐蚀测试的标准试验方法 Standard Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at 680°F [360°C]or in Steam at 750°F [400°C]
ASTM G 28-2002 煅制富镍铬轴承合金晶间腐蚀敏感性的探测用标准试验方法 Standard Test Methods of Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys
ASTM G 34-2001 2XXX和7XXX系列铝合金剥落腐蚀敏感性的试验方法(EXCO 试验) Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test)
ASTM G 35-1998 不锈钢及有关镍铬铁合金在连多硫酸中应力腐蚀断裂灵敏性测定的标准实施规程 Standard Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress-Corrosion Cracking in Polythionic Acids
ASTM G 36-1994 评定在沸腾的氯化镁溶液中金属及其合金的抗应力腐蚀断裂 Standard Practice for Evaluating Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling Magnesium Chloride Solution
ASTM G 37-1998 用pH值为7.2的玛特松(mattsson's)溶液评价铜锌合金的应力腐蚀断裂灵敏性 Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress- Corrosion Cracking Susceptibility of Copper-Zinc Alloys
ASTM G 44-1999 在3.5%氯化钠中性溶液中用交替浸渍法的金属及合金暴露的标准实施规程 Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5% Sodium Chloride Solution
ASTM G 47-1998 测定高强度铝合金制品应力腐蚀断裂敏感性的标准试验方法 Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products
ASTM G 48-2003 用氯化铁溶液测定不锈钢及有关合金耐点腐蚀和缝隙腐蚀的标准试验方法 Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
ASTM G 52-2000 金属及合金在海水表面暴露与评定的标准实施规范 Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater
ASTM G 61-1986 铁镍钴基合金的局部腐蚀敏感性的循环动电势极化强度的试验方法 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys
ASTM G 64-1999 热处理铝合金抗应力腐蚀断裂性的标准分类 Standard Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys
ASTM G 66-1999 5XXX系列铝合金的剥落腐蚀敏感性的外观评定的试验方法(ASSET试验) Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test)
ASTM G 67-2004 用接触硝酸环境之后的重量损失来测定5XXX系列铝合金晶间腐蚀敏感性的标准试验方法(NAMLT 试验) Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test)
ASTM G 69-1997 测定铝合金潜在腐蚀性 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
ASTM G 78-2001 海水及其它含氯化物的水环境中铁基和镍基不锈合金的裂隙腐蚀试验的标准指南 Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments
编号 中文名称 英文名称

返回