| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| ANSI ATIS0100803-1998 | 电信.全球开关电话网(GSTN)多媒体终端的概述和参考 | Telecommunications - Overview and Reference for GSTN Multimedia Terminals |
| ANSI C12.9-2005 | 变压器额定仪表用测试开关 | Test Switches for Transformer-Rated Meters |
| ANSI C37.06a-1989 | 开关装置.对称电流限定的交流高压断路器.优先额定值和相应要求性能 | Switchgear - AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Preferred Ratings and Related Required Capabilities |
| ANSI C37.22-1997 | 用于金属封闭开关设备的室内交流电中压开关优选额定值和相关要求性能 | Preferred Ratings and Related Required Capabilities for Indoor AC Medium-Voltage Switches Used in Metal-Enclosed Switchgear |
| ANSI C37.32-2002 | 高压空气断路开关、断路器开关、错误初始开关、接地开关、总线支架和附件控制电压范围.优选额定值、制造指 | High-Voltage Air Disconnect Switches Interrupter Switches, Fault Initiating Switches, Grounding Switches, Bus supports and Accessories Control Voltage Ranges – Schedule of Preferred Ratings, Construction Guidelines and Specifications |
| ANSI C37.33a Supplement-1990 | 转换开关装置.高电压空气转换开关.额定控制电压及其范围：补充件 | Switchgear - High-voltage air switches - Rated control voltages and their ranges; Supplement |
| ANSI C37.50-2010 | 开关设备.封装式低压交流电力线路断路器.测试规程 | Low-Voltage AC Power Circuit Breakers Used in Enclosures - Test Procedures |
| ANSI C37.51-2003 | 金属封装低压交流电力断路器开关设备组件.合格试验规程 | Metal-Enclosed Low-Voltage AC Power-Circuit-Breaker Switchgear Assemblies - Conformance Test Procedures |
| ANSI C37.51a-2010 | 开关设备用美国国家标准.金属封装低压交流电力线路断路器的开关装置组件.一致性试验程序.修改件1：短时耐受 | "American National Standard for Switchgear - Metal-Enclosed Low-Voltage AC Power Circuit Breaker Switchgear Assemblies - Conformance Test Procedures - Amendment 1: Short-Time Withstand Current Tests". |
| ANSI C37.54-2003 | 金属封装开关组件中作为可拆除元件的室内交流高压断路器的一致性试验规程 | Conformance Test Procedures for Indoor Alternating Current High-Voltage Circuit Breakers Applied as Removable Elements in Metal-Enclosed Switchgear Assemblies |
| ANSI C37.55-2003 | 金属覆层中压开关装置组件.一致性试验规程 | Medium Voltage Metal-Clad Switchgear Assemblies -- Conformance Test Procedures |
| ANSI C37.57-2003 | 开关装置.金属封装断路器开关装置组件.一致性试验 | Switchgear – Metal-Enclosed Interrupter Switchgear Assemblies – Conformance Testing |
| ANSI C37.58-2003 | 金属封装的开关设备中使用的室内交流中压开关的一致性试验规程 | Conformance Test Procedures for Indoor AC Medium Voltage Switches for Use in Metal-Enclosed Switchgear |
| ANSI C37.85-2002 | 电力开关用交流高压电力真空断路器的X射线辐射极限 | Interrupters Used in Power Switchgear, X-Radiation Limits for AC High-Voltage Power Vacuum |
| ANSI INCITS 384-2004 | 信息技术.光纤信道.开关结构-3 (FC-SW-3) | Information Technology - Fibre Channel - Switch Fabric - 3 (FC-SW-3) |
| ANSI INCITS 418-2006 | 光纤信道开关构造-4(FC-SW-4)用信息技术 | For Information Technology ?Fibre Channel ?Switch Fabric- 4 (FC-SW-4) |
| ANSI INCITS418-2006 | 信息技术.光纤信道开关构造.4(FC-SW-4) | Information technology - Fibre Channel Switch Fabric - 4 (FC-SW-4) |
| ANSI NCITS 355-2001 | 信息技术.光纤信道开关构造.2 (FC-SW-2) | Information Technology - Fibre Channel Switch Fabric -2 (FC-SW-2) |
| ANSI T1.105.01 (R 200x)-2000 | 电信.同步光纤网络(SONET).自动保护开关 | Telecommunications - Synchronous Optical Network (SONET) - Automatic Protection Switching |
| ANSI T1.506-1997 | 网络性能.开关交换访问网络传输规范 | Network Performance – Switched Exchange Access Network Transmission Specifications |
| ANSI/ASSE 1019-2004 | 防冻自动排水型真空开关墙壁消防栓性能要求 | Performance Requirements for Vacuum Breaker Wall Hydrant, Freeze Resistant Automatic Draining Type |
| ANSI/ASTM F2071-2001 | 位置相近(非接触式)或限值(机械接触式)光纤开关规范 | Specification for Switch, Position, Proximity (Non-Contact) or Limit (Mechanical Contact), Fiber Optic |
| ANSI/EIA 446-3-1981 | 0.750方形底座，1销和2销0.001到10安培的有指示灯和无指示灯的按钮开关 | Pushbutton Switches, Illuminated and Nonilluminated, 0.750 Square Mounting, 1 and 2 Poles, 0.001 to 10 Amperes |
| ANSI/EIA 446-4-1981 | 0.625方形底座,1销和2销,1安的有指示灯和无指示灯，非灵敏按钮开关的详细规范 | Pushbutton Switches 0.625 Sq Mounting, One and Two Pole, 1.0 Ampere, Detail Specification for Illuminated and Non-Illuminated Non-Sensitive |
| ANSI/EIA 446-A-1981 | 非灵敏按钮开关 | Non-Sensitive Pushbutton Switches |
| ANSI/EIA 448-1B-1992 | 机电开关的标准试验方法(触点跳动试验) | Standard Test Method for Electromechanical Switches (Test for Contact Bounce) |
| ANSI/EIA 448-21A-2000 | 机电元件的试验标准.开关.用红外系统法确定机械焊接的交替环境效应 | Test Standard for Electromechanical Components - Switch Environmental Effects of Machine Soldering Using an Infrared System |
| ANSI/EIA 448-24-1993 | 试验方法24：固体开关转换试验 | Test Method 24 Solid State Switch Transfer Tests |
| ANSI/EIA 448-3-A-1990 | 机电开关试验方法3(色度).注.1990-04-27批准 | Electromechanical Switches, Test Method 3 (Chromaticity) / Note: Approved 1990-04-27. |
| ANSI/EIA 480-1981 | 拨动开关 | Toggle Switches |
| ANSI/EIA 498AA00-1992 | 键盘开关的空白详细规范 | Keyboard Switches, Blank Detail Specification for |
| ANSI/EIA 498AAOO-1992 | 键盘开关的空白详细规范.注:1992-02-07批准 | Keyboard Switches, Blank Detail Specification for / Note: Approved 1992-02-07. |
| ANSI/EIA 498BAOO-1989 | 键盘开关的空白详细规范.注:1989-09-18批准 | Blank Detail Specification for Keyboard Switches / Note: Approved 1989-09-18 |
| ANSI/EIA 498BOOO-1988 | 质量认证的触摸开关板分规范.注:1988-04-28批准 | Sectional Specification, Touch Stroke Switch Panels of Certified Quality / Note: Approved 1988-04-28. |
| ANSI/EIA 5200000-D-2000 | 已质量认证的专用电机开关的总规范 | Generic Specification for Special-Use Electromechanical Switches of Certified Quality |
| ANSI/EIA 520A000-A-1992 | 质量认证的按扣开关分规范 | Sectional Specification for Pushbutton Switches of Certified Quality |
| ANSI/EIA 520AAAA-A-1991 | 单极接触式非灵敏按钮开关的详细规范 | Non-Sensitive Pushbutton Switch Single-Pole Contact, Detail Specification for |
| ANSI/EIA 520AAAB-A-1991 | 瞬时接触式非灵敏按钮开关的详细规范 | Detail Specification for Non-Sensitive Pushbutton Switch Momentary Contact |
| ANSI/EIA 520AAAC-1990 | 15.88mm安装孔非灵敏按钮开关的空白详细规范.注:1989-08-21批准 | Blank Detail Specification for Switch, Non-Sensitive, Pushbutton 15.88 mm of Mounting Hole / Note: Approved 1989-08-21. |
| ANSI/EIA 520AAOO-1987 | 质量认证的专用按钮开关空白详细规范.注:1987-09-25批准 | Blank Detail Specification: Special-Use Pushbutton Switches of Certified Quality / Note: Approved 1987-09-25. |
| ANSI/EIA 520AOOO-A-1992 | 质量认证的专用按钮开关分规范.注:ANSI/EIA 520A000-1987的修订和重新编制1992-05-26批准 | Sectional Specification for Pushbutton Switches of Certified Quality / Note: revision and redesignation of ANSI/EIA 520A000-1987 * Approved 1992-05-26. |
| ANSI/EIA 520B000-1991 | 已质量认证的数字开关(指轮开关、按钮开关和杠杆开关)分规范 | Digital Switches (Thumbwheel, Pushbutton, and Lever Actuated) of Certified Quality, Sectional Specification for |
| ANSI/EIA 520BOOO-1991 | 质量认证的数字开关(指轮开关、按钮开关和杠杆开关)分规范.注:1991-12-12批准 | Digital Switches (Thumbwheel, Pushbutton, and Lever Actuated) of Certified Quality, Sectional Specification for / Note: Approved 1991-12-12. |
| ANSI/EIA 520C000-1987 | 分规范 ：已质量认证的灵敏开关 | Sectional Specification: Sensitive Switches of Certified Quality |
| ANSI/EIA 520CA00-A-1992 | 已质量认证的专用灵敏开关的空白详细规范 | Special Use Sensitive Switches of Certified Quality Blank Detail Specification for |
| ANSI/EIA 520CAAA-A-1991 | 基本尺寸单开路触点的灵敏开关的详细规范 | Sensitive Switches, Single Break Contacts, Basic Size, Detail Specification for |
| ANSI/EIA 520CAAB-A-1991 | 小尺寸单开路触点的灵敏开关的详细规范 | Sensitive Switches, Single Break Contacts, Miniature Size, Detail Specification for |
| ANSI/EIA 520CAAC-A-1992 | 超小型单断接点组灵敏开关的详细规范 | Sensitive Switches, Single-Break Contacts, Subminiature Size, Detail Specification for |
| ANSI/EIA 520CAAD-A-1992 | 超超小型7A单断接点组灵敏开关的详细规范 | Sensitive Switches, Single-Break Contacts, Sub-Subminiature Size 7A, Detail Specification for |
| ANSI/EIA 520CAOO-A-1992 | 质量认证的专用灵敏开关的空白详细规范.注:ANSI/EIA 520CA00-1987的修订和重新编制1992-04-20批准 | Special Use Sensitive Switches of Certified Quality Blank Detail Specification for / Note: revision and redesignation of ANSI/EIA 520CA00-1987 * Approved 1992-04-20. |
| ANSI/EIA 520DOOO-1987 | 质量认证的扳钮、闸板和摇臂开关分规范.注:1987-04-15批准 | Sectional Specification: Toggle, Paddle, and Rocker Switches of Certified Quality / Note: Approved 1987-04-15. |
| ANSI/EIA 520E000-A-2000 | 已质量认证的直插式开关的分规范 | Sectional Specification for In-Line Switches of Certified Quality |
| ANSI/EIA 520EAAC-1990 | 双列直插式开关详细规范 | Detail Specification for Dual-In-Line Switches |
| ANSI/EIA 520EAAD-1990 | 升降滑动驱动的双列式封装开关详细规范 | Detail Specification on Dual-In-Line Package Switches, Raised and Recessed Slide-Actuated |
| ANSI/EIA 520EAOO-1989 | 直插式开关空白详细规范.注:1989-01-23批准 | Blank Detail Specification for In-Line Switches / Note: Approved 1989-01-23. |
| ANSI/EIA 520F000-A-1996 | 已质量认证的旋转式开关分规范(2安培或以下的低电流) | Sectional Specification for Rotary Switches of Certified Quality (Low Current Capacity - 2 Amperes or Less) |
| ANSI/EIA 520FA00-1992 | 已质量认证的专用旋转式开关空白详细规范 | Blank Detail Specification for Special-Use Rotary Switches of Certified Quality |
| ANSI/EIA 520FAAA-1995 | 已质量认证的(低电流)最大12位置的旋转式开关的详细规范 | Detail Specification for Rotary Switches of Certified Quality (Low Current Rating) 12 Positions Maximum |
| ANSI/EIA 520FAAB-1995 | 已质量认证的(低电流)最大16位置的旋转式开关的详细规范 | Detail Specification for Rotary Switches of Certified Quality (Low Current Rating) 16 Positions Maximum |
| ANSI/EIA 520FAOO-1992 | 质量认证的专用旋转式开关空白详细规范.注:ANSI/EIA 520FA00-1992的再确认1997-11-06批准 | Blank Detail Specification for Special-Use Rotary Switches of Certified Quality / Note: reaffirmation of ANSI/EIA 520FA00-1992 * Approved 1997-11-06. |
| ANSI/EIA-448-21A-2000 | 机电元件-开关的试验标准.用红外系统的机械钎焊的环境影响 | Test Standard for Electromechanical Components - Switch Environmental Effects of Machine Soldering Using an Infrared System |
| ANSI/EIA-5200000-D-2000 | 经质量认证的专用电机开关的通用规范 | Generic Specification for Special-Use Electromechanical Switches of Certified Quality |
| ANSI/EIA-520E000-A-2000 | 质量认证的直插式开关的分规范 | Sectional Specification for In-Line Switches of Certified Quality |
| ANSI/IEEE 1247-2005 | 额定电压大于1000伏的交流断路开关标准 | Standard for Interrupter Switches for Alternating Current, Rated Above 1000 Volts |
| ANSI/IEEE 1291-1993 | 电力开关设备局部放电测量指南 | Guide for Partial Discharge Measurements in Power Switchgear |
| ANSI/IEEE C12.9-1993 | 变压器额定仪表用测试开关的美国国家标准 | American National Standard for Test Switches for Transformer-Rated Meters |
| ANSI/IEEE C37.012-2005 | 交流高压断路器用电容性电流开关的应用指南 | Application Guide for Capacitance Current Switching for AC High-Voltage Circuit Breakers |
| ANSI/IEEE C37.015-2009 | 并联电抗器开关操作的应用指南 | Guide for the Application of Shunt Reactor Switching |
| ANSI/IEEE C37.016-2006 | 额定电压为15.5kV-245kV的交流电流(AC)高压电路开关标准 | Standard for AC High-Voltage Circuit Switchers rated 15.5 kV through 245 kV |
| ANSI/IEEE C37.083-1999 | 交流高压断路器的合成电容电路开关试验指南 | Guide for Synthetic Capacitive Switching Tests of AC High-Voltage Circuit Breakers |
| ANSI/IEEE C37.09a-2005 | 基于对称电流的交流(AC)高压断路器标准试验程序.修改件1:电容电流开关 | Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Amendment 1: Capacitance Current Switching |
| ANSI/IEEE C37.100-1992 | 电源开关装置的定义 | Definitions for Power Switchgear |
| ANSI/IEEE C37.100.1-2007 | 1000V以上的额定高压电源开关的一般要求标准 | Standard of Common Requirements for High Voltage Power Switchgear Rated Above 1000 V |
| ANSI/IEEE C37.121-1989 | 开关装置.单元变电所.要求 | Switchgear – Unit Substations – Requirements |
| ANSI/IEEE C37.13.1-2006 | 金属封装低电压功率电力断路器专用开关设备标准 | Standard for Definite Purpose Switching Devices for Use in Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear |
| ANSI/IEEE C37.20.1-2002 | 带金属包壳的低压电力断路开关设备 | Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear |
| ANSI/IEEE C37.20.1a-2005 | 金属壳密封的低压电力线路断路器开关设备标准.修改1:短时间和短路可耐电流测试;多电缆连接的最小区域 | Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear - Amendment 1: Short-Time and Short-Circuit Withstand Current Tests; Minimum Areas for Multiple Cable Connections |
| ANSI/IEEE C37.20.1b-2006 | 金属密封的低压电力断路器开关设备标准.修改件2:直流电(DC)牵引电力开关控制和辅助电力布线的附加要求 | Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear - Amendment 2: Additional Requirements for Control and Auxiliary Power Wiring in DC Traction Power Switchgear |
| ANSI/IEEE C37.20.2-1999 | 金属壳台式组合开关设备 | Metal-Clad and Station-Type Cubicle Switchgear |
| ANSI/IEEE C37.20.3-2001 | 金属壳封闭中断开关装置的标准 | Standard for Metal-Enclosed Interrupter Switchgear |
| ANSI/IEEE C37.20.4-2001 | 金属外壳开关设备用室内交流开关(1kV-38kV)标准 | Standard for Indoor AC Switches (1 kV - 38 kV) for Use in Metal-Enclosed Switchgear |
| ANSI/IEEE C37.20.7-2007 | 内部电弧故障用压力等级小于38kV的金属外壳开关装置的测试用指南 | Guide for Testing Metal-Enclosed Switchgear Rated Up to 38kV for Internal Arcing Faults |
| ANSI/IEEE C37.24-2003 | 评价太阳辐射对室外铠装开关装置影响的指南 | Guide for Evaluating the Effect of Solar Radiation on Outdoor Metal-Enclosed Switchgear |
| ANSI/IEEE C37.40-2003 | 高压熔断器,配电封装单刀空气开关,熔断开关和附件的标准工作条件和术语定义 | Standard Service Conditions and Definitions for High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories |
| ANSI/IEEE C37.41-2008 | 交流电源盒配电系统用高压＞1000V保险丝、保险丝和断开断路器、附单极空气开关外壳的配电、保险丝断开开关 | Standard Design Tests for High-Voltage (1000 V) Fuses, Fuse and Disconnecting Cutouts, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories for Use on AC Power and Distribution Systems |
| ANSI/IEEE C37.42-2009 | 高压（1000 V）冲击式配电级熔丝、熔丝切断开关、熔丝链以及这些装置所用配件的规范标准 | Standard for Specifications for High Voltage(1000 Volts) Expulsion Type Distribution Class Fuses, Fuse and Disconnecting Cutouts, Fuse Disconnecting Switches and Fuse Links and Accessories Used with These Devices |
| ANSI/IEEE C37.45-2007 | 额定电压为1～8.3kV的高压封闭式单极空气配电开关的标准规范 | Standard Specifications for High Voltage Distribution Class Enclosed Single-Pole Air Switches with Rated Voltages from 1 through 8.3 kV |
| ANSI/IEEE C37.46-2010 | 高压( 1000 V)冲出式和电流限制功率等级保险丝和保险丝断开开关用标准规格 | Standard Specifications for High Voltage ( 1000 V) Expulsion and Current-limiting Power Class Fuses and Fuse Disconnecting Switches |
| ANSI/IEEE C37.48-2004 | 高压熔断器、配电封口单极空气开关、熔丝切断开关及附件的应用、操作和维护指南 | Guide for the Application, Operation, and Maintenance of High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories |
| ANSI/IEEE C37.59-2007 | 电源开关装置的转换用标准要求 | Standard Requirements for Conversion of Power Switchgear Equipment |
| ANSI/IEEE C37.60-2003/Cor 1-2004 | 38kV及以下交流系统用架空底座安装型、干燥地下室型和浸入式电路自动重合开关和故障断路器的要求标准 | Standard Requirements for Overhead Pad-Mounted, Dry Vault, and Submersible Automatic Circuit Reclosers and Fault Interrupters for Alternating Current Systems Up to 38 kV - Corrigendum 1 |
| ANSI/IEEE C37.66-2005 | 交流电系统(1 to 38 kV)用电容器开关的标准要求 | Standard Requirements for Capacitor Switches for Alternating-Current Systems (1 to 38 kV) |
| ANSI/IEEE C37.71-2001 | 三相交流电系统亚层负载断开开关手工操作要求 | Three Phase, Manually Operated Subsurface Load Interrupting Switches for Alternating-Current Systems, Requirements for |
| ANSI/IEEE C37.74-2003 | 38kv及以下的交流系统用地下、地下室及底座安装型负载中断开关设备和熔融中断开关设备的标准要求 | Standard Requirements for Subsurface, Vault, and Padmounted Load-Interrupter Switchgear and Fused Load-Interrupter Switchgear for Alternating Current Systems up to 38 kV |
| ANSI/IEEE C37.81-1989 | 1E类金属壳电源开关装置组件的抗震合格鉴定 | Guide for Seismic Qualification of Class 1E Metal-Enclosed Power Switchgear Assemblies |
| ANSI/IEEE C37.82-1987 | 核电站中1E级设施用开关装置组件的合格鉴定标准 | Standard for the Qualification of Switchgear Assemblies for Class 1E Applications in Nuclear Power Generating Stations |
| ANSI/NECA 430-2006 | 常压开关设备安装标准 | Standard for Installing Medium-Voltage Switchgear |
| ANSI/NEMA KS1-1991 | 封闭式和其他配电装置开关(600V) | Enclosed and Miscellaneous Distribution Equipment Switches (600 Volts) |
| ANSI/NEMA PB2.1-2007 | 额定电压600 V或以下的不露带电部分的配电开关板的适当处理,安装,操作和维修的一般说明 | General Instructions for Proper Handling, Installation, Operation, and Maintenance of Deadfront Distribution Switchboards Rated 600 Volts or Less |
| ANSI/SCTE 165-12-2009 | IPCablecom 1.5 第12部分:公用开关电话网络(PSTN)呼叫信号协议 | IPCablecom 1.5 Part 12: PSTN Gateway Call Signaling Protocol |
| ANSI/SCTE 76-2007 | 天线选择器开关 | Antenna Selector Switches |
| ANSI/TIA-464-C-1-2004 | PBX开关设备的电信多线终端设备要求,附件1 | Telecommunications Multiline Terminal Systems Requirements for PBX Switching Equipment, Addendum 1 |
| ANSI/TIA/EIA 732.1024-2001 | 蜂窝数字数据资料(CDPD).线路开关式蜂窝数字数据包 | Cellular Digital Packet Data (CDPD) - Circuit Switched Cellular Digital Packet Data |
| ANSI/UL 1008-2008 | 转换开关设备的安全标准 | Standard for Safety for Transfer Switch Equipment |
| ANSI/UL 1054-2008 | 特殊用途开关安全标准 | Standard for Safety for Special-Use Switches |
| ANSI/UL 1429-2009 | 拨动开关的安全性标准 | Standard for Safety for Pullout Switches |
| ANSI/UL 20-2010 | 一般使用按钮开关安全性标准 | Standard for Safety for General-Use Snap Switches |
| ANSI/UL 20a-2004 | 通用速动开关 | General-Use Snap Switches |
| ANSI/UL 489-2009 | 模压外壳断路器,模压外壳开关和断路器外壳的安全性标准 | Standard for Safety for Molded-Case Circuit Breakers, Molded-Case Switches, and Circuit-Breaker Enclosures |
| ANSI/UL 60947-1-2007 | 低压开关设备和控制设备的安全标准.第1部分:总则 | Standard for Safety for Low-Voltage Switchgear and Controlgear - Part 1: General Rules |
| ANSI/UL 60947-4-1-2007 | 低压开关设备和控制设备的安全标准.第4-1部分:电流接触器和电动机起动器.电机接触器和电动机起动器 | Standard for Safety for Low-Voltage Switchgear and Controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters |
| ANSI/UL 60947-5-2-2007 | 低压开关设备和控制设备的安全标准.第5-2部分:控制电路装置和开关元件.近接开关 | Standard for Safety for Low-Voltage Switchgear and Controlgear - Part 5-2: Control Circuit Devices and Switching Elements - Proximity Switches |
| ANSI/UL 61058-1-2009 | 电器开关.第1部分:一般要求 | Switches for Appliances - Part 1: General Requirements |
| ANSI/UL 634-2007 | 带有防盗警报的连接器和开关的标准 | Standard for Connectors and Switches for Use with Burglar-Alarm Systems (Proposal dated 4-13-07) |
| ANSI/UL 773A-2006 | 用于照明控制的非工业用光电开关安全性标准 | Standard for Safety for Nonindustrial Photoelectric Switches for Lighting Control |
| ASME B 16.40 Erratum-2003 | 燃气分配系统中的手动热塑性气体开关和阀门.对ASME B 16.40-2002的勘误 | (Manually operated thermoplastic gas shutoffs and valves in gas distribution systems; Erratum to ASME B16.40-2002) |
| ASTM F1578-2007 | 薄膜开关的接触闭合循环用标准试验方法 | Standard Test Method for Contact Closure Cycling of a Membrane Switch |
| ASTM F1595-2000(2005) | 薄膜开关目测检验时观测条件的标准实施规程 | Standard Practice for Viewing Conditions for Visual Inspection of Membrane Switches |
| ASTM F1596-2007 | 温度和相对湿度对薄膜开关影响的标准试验方法 | Standard Test Method for Exposure of Membrane Switches to Temperature and Relative Humidity |
| ASTM F1598-1995(2007) | 测定化学溶剂对薄膜开关图形重叠影响的标准试验方法(逐点试验法) | Standard Test Method for Determining the Effects of Chemical/Solvent Exposure to a Membrane Switch/Graphic Overlay (Spot Test Method) |
| ASTM F1661-2009 | 测定薄膜开关接触弹力的标准试验方法 | Standard Test Method for Determining the Contact Bounce Time of a Membrane Switch |
| ASTM F1662-2010 | 验证膜片开关的指定介电耐受电压和确定介电击穿电压的标准试验方法 | Standard Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch |
| ASTM F1663-2009 | 测定薄膜开关电阻的标准试验方法 | Standard Test Method for Determining the Capacitance of a Membrane Switch |
| ASTM F1680-2007a | 薄膜开关线路阻抗的测定用标准试验方法 | Standard Test Method for Determining Circuit Resistance of a Membrane Switch |
| ASTM F1681-2007a | 测定薄膜开关线路元件导体载流量的标准试验方法 | Standard Test Method for Determining Current Carrying Capacity of a Conductor as Part of a Membrane Switch Circuit |
| ASTM F1683-2009 | 薄膜开关、薄膜开关引线组件或薄膜开关元件折皱或弯曲的标准实施规程 | Standard Practice for Creasing or Bending a Membrane Switch, Membrane Switch Flex Tail Assembly or Membrane Switch Component |
| ASTM F1689-2005 | 测定薄膜开关绝缘电阻的标准试验方法 | Standard Test Method for Determining the Insulation Resistance of a Membrane Switch |
| ASTM F1762-2007 | 将薄膜开关暴露于变化的大气压下的标准实施规范 | Standard Practice for Exposing a Membrane Switch to Variation in Atmospheric Pressure |
| ASTM F1812-2009 | 测定薄膜开关ESD屏蔽有效性的标准试验方法 | Standard Test Method for Determining the Effectiveness of Membrane Switch ESD Shielding |
| ASTM F1842-2009 | 测定薄膜开关的塑料基质上油墨或涂层粘附的标准试验方法 | Standard Test Method for Determining Ink or Coating Adhesion on Plastic Substrates for Membrane Switch Applications |
| ASTM F1895-2010 | 膜片开关的浸没规程 | Practice for Submersion of a Membrane Switch |
| ASTM F1995-2000(2005) | 利用薄膜开关剪切力测定表面安装设备(SMD)粘着强度的标准试验方法 | Standard Test Method for Determining the Bond Strength for a Surface Mount Device (SMD) by Applying Shear Force on a Membrane Switch |
| ASTM F1996-2006 | 薄膜开关电路系统银迁移的标准试验方法 | Standard Test Method for Silver Migration for Membrane Switch Circuitry |
| ASTM F2071-2000(2006) | 位置近似(非接触式)或限值(机械接触式)光纤开关标准规范 | Standard Specification for Switch, Position Proximity (Noncontact) or Limit (Mechanical Contact), Fiber-Optic |
| ASTM F2072-2001(2007) | 薄膜开关软管洗涤的标准实施规程 | Standard Practice for Hosedown of a Membrane Switch |
| ASTM F2073-2001(2006) | 薄膜开关无损短路检验的标准试验方法 | Standard Test Method for Non-Destructive Short Circuit Testing of a Membrane Switch |
| ASTM F2112-2002 | 薄膜开关的标准术语 | Standard Terminology for Membrane Switches |
| ASTM F2187-2002 | 在薄膜开关或薄膜开关组合上检测射频振动影响的标准试验方法 | Standard Test Method for Determining the Effect of Random Frequency Vibration on a Membrane Switch or Membrane Switch Assembly |
| ASTM F2188-2002 | 在薄膜开关或薄膜开关组合上检测可变频振动影响的标准试验方法 | Standard Test Method for Determining the Effect of Variable Frequency Vibration on a Membrane Switch or Membrane Switch Assembly |
| ASTM F2357-2010 | 使用NORMAN工具“RCA”磨擦器测定薄膜开关上墨水和涂层耐磨性的标准试验方法 | Standard Test Method for Determining the Abrasion Resistance of Inks and Coatings on Membrane Switches Using the Norman Tool "RCA" Abrader |
| ASTM F2359-2004 | 带漫射光源的薄膜开关背面照明的颜色测定标准试验方法 | Standard Test Method for Determining Color of a Membrane Switch Backlit with Diffuse Light Source |
| ASTM F2360-2008 | 测定漫射光源用膜开关反光的亮度的标准试验方法 | Standard Test Method for Determining Luminance of a Membrane Switch Backlit with Diffuse Light Source |
| ASTM F2592-2009 | 测量薄膜开关的力位移的标准试验方法 | Standard Test Method for Measuring the Force-Displacement of a Membrane Switch |
| ASTM F2749-2009 | 测定薄膜开关或组件压痕效应的标准试验方法 | Standard Test Method for Determining the Effects of Creasing a Membrane Switch or Assembly |
| ASTM F2750-2009 | 测定薄膜开关或薄膜开关组合弯曲影响的标准试验方法 | Standard Test Method for Determining the Effects of Bending a Membrane Switch or Assembly |
| BS 5583-1978 | 工业用低压开关设备和控制装置规范.专用触点继电器用接线端标记、识别号码和识别字母 | Specification for low voltage switchgear and controlgear for industrial use - Terminal marking, distinctive number and distinctive letter for particular contactor relays |
| EN 12098-2-2001 | 供暖系统控制设备 第2部分：.热水供暖系统的最佳开关控制设备 | Controls for heating systems - Part 2: Optimum start-stop control equipment for hot water heating systems |
| IEEE 1247-1998 | 额定电压在1000V以上选择电流的断路器开关 | (Interrupter switches for alternating current, rated above 1000 volts) |
| IEEE 1291-1993 | 在电源开关中测量局部放电的指南 | (Guide for partial discharge measurement in power switchgear) |
| IEEE C 12.9-1993 | 变压系数表的测试开关 | (Test switches for transformer-rated meters) |
| IEEE C 37.015-1993 | 分路电抗器开关的应用指南 | (Application guide for shunt reactor switching) |
| IEEE C 37.04a-2003 | 基于平衡电流的交流高压断路器的额定结构.修改件1:电容电流开关 | (Rating structure for AC high-voltage circuit breakers rated on an symmetrical current basis - Amendment 1: Capacitance current switching) |
| IEEE C 37.083-1999 | 交流高压电路断路器的合成电容电路开关试验指南 | (Guide for synthetic capacitive current switching tests of AC high-voltage circuit breakers) |
| IEEE C 37.100-1992 | 电源开关设备的定义 | (Definitions for power switchgear) |
| IEEE C 37.20.1-2002 | 铠装低压电源断路器开关设备 | (Metal-enclosed low-voltage power circuit breaker switchgear) |
| IEEE C 37.20.2-1999 | 金属包覆的开关设备 | (Metal-clad switchgear) |
| IEEE C 37.20.3-2001 | 金属封装中断器开关 | (Metal-enclosed interrupter switchgear) |
| IEEE C 37.20.4-2001 | 金属封装开关装置中使用的室内交流开关(1kV--38kV) | (Indoor AC switches (1kV - 38kV) for use in metal-enclosed switchgear) |
| IEEE C 37.24-1986 | 太阳辐射户外铠装开关设备上太阳辐射影响的评定指南 | (Guide for evaluating the effect of solar radiation on outdoor metal-enclosed switchgear) |
| IEEE C 37.30-1997 | 高压开关的要求 | (Requirements for high-voltage switches) |
| IEEE C 37.34-1994 | 高压空气开关的试验规程 | (Test code for high-voltage air switches) |
| IEEE C 37.35-1995 | 高压空气断路和加载断路开关的应用、安装、操作和维修指南 | (Guide for the application, installation, operation, and maintenance of high-voltage air disconnecting and load interrupter switches) |
| IEEE C 37.36b-1990 | 角状间隙空气开关断流指南 | (Guide to current interruption with horn-gap air switches) |
| IEEE C 37.37-1996 | 交流高压空气开关加载指南(超过1000V) | (Loading guide for AC high-voltage air switches (in excess of 1000 V)) |
| IEEE C 37.38-1989 | 气体绝缘,金属盒切断,断路和接地开关 | (Gas-insulated, metal enclosed disconnecting, interrupter, and grounding switches) |
| IEEE C 37.40-1993 | 高压熔断器、封闭式单刀空气配电开关、熔断开关和附件的工作条件和定义 | (Service conditions and definitions for high-voltage fuses, distribution enclosed single-pole air switches, fuse disconnecting switches, and accessories) |
| IEEE C 37.41-2000 | 高压熔断器、封闭式单极空气配电开关、熔断开关和附件的设计试验 | (Design tests for high-voltage fuses, distribution enclosed single-pole air switches, fuse disconnecting switches, and accessories) |
| IEEE C 37.48-1997 | 高压熔断器、封闭式单极空气配电开关、熔断器切断开关和附件的应用、操作和维护指南 | (Guide for the application, operation, and maintenance of high-voltage fuses, distribution enclosed single-pole air switches, fuse disconnecting switches, and accessories) |
| IEEE C 37.59-2002 | 电源开关设备的转换要求 | (Requirements for conversion of power switchgear equipment) |
| IEEE C 37.71-2001 | 交流系统用三相手工操作的地下负载隔离开关 | (Three-phase, manually operated subsurface and vault load-interrupting switches for alternating-current systems) |
| IEEE C 37.73-1998 | 片固定熔化开关设备的要求 | (Requirements for pad-mounted fused switchgear) |
| IEEE C 37.74-2003 | 38kv及以下的交流系统用地下、地下室及底座安装型负载中断开关设备和熔融负载中断开关设备的标准要求 | (Requirements for subsurface, vault, and pad-mounted load-interrupter switchgear and fused load-interrupter switchgear for alternating current systems up to 38 kV) |
| IEEE C 37.81-1989 | 1E级金属铠装电源开关设备组件的抗地震性鉴定指南 | (Guide for seismic qualification of class 1E metal-enclosed power switchgear assemblies) |
| IEEE C 37.82-1987 | 核电站中1E级用开关设备组件的鉴定 | (Qualification of switchgear assemblies for class 1E applications in nuclear power generating stations) |
| UL 1008-1996 | 转接开关设备 | (Transfer switch equipment ) |
| UL 1054-2003 | 专用转换开关 | (Special-use switches ) |
| UL 1429-2000 | 拨动开关 | (Pullout switches ) |
| UL 1558-1999 | 有金属包壳的低压电路断路器开关设备 | (Metal-enclosed low-voltage power circuit breaker switchgear ) |
| UL 1567-1998 | 铝线用插座和开关 | (Receptacles and switches intended for use with aluminium wire ) |
| UL 1659-1997 | 塞绳装置和电源线用连接插头刀形开关 | (Attachement plug blades for use in cord sets and power-supply cords ) |
| UL 363-2000 | 闸刀开关 | (Knife switches ) |
| UL 489-2002 | 模制断路器,模制开关器和断路器外壳 | (Molded-case circuit breakers, molded-case switches, and circuit-breaker enclosures ) |
| UL 61058-1-2002 | 器具的开关 | (Switches for appliances ) |
| UL 634-2000 | 防盗报警系统用连接器和开关 | (Connectors and switches for use with burglar-alarm systems ) |
| UL 773A-1995 | 照明控制用非工业光电开关 | (Nonindustrial photoelectric switches for lighting control ) |
| UL 793-2003 | 排烟和加热用自动开关屋顶通风孔 | (Automatically operated roof vents for smoke and heat) |
| UL 894-1993 | 危险(分类的)场所用开关 | (Switches for use in hazardous (classified) locations ) |
| UL 917-1994 | 钟控开关 | (Clock-operated switches ) |
| UL 98-2004 | 包封并且正面不带电的开关 | (Enclosed and dead-front switches ) |
| UL 98A-2002 | 开放型开关 | (Open type switches ) |
| 编号 | 中文名称 | 英文名称 |