| 编号 | 中文名称 | 英文名称 |
|---|
| IEC/PAS 61169-4-2006
| 无线电频率连接器.第4部分:分规范.具有螺钉锁定的外部导体内径为16mm(0.63in)的射频同轴连接器.特性阻抗为5
| Radio-frequency connectors - Part 4: Sectional specification - Radio-frequency coaxial connectors with inner diameter of outer conductor 16 mm (0,63 in) with screw lock - Characteristic impedance 50 (type 7-16)
|
| ISO 10045-1991
| 高山雪橇 捆绑安装区 试验螺钉的要求
| Alpine skis; binding mounting area; requirements for test screws
|
| ISO 10102-2001
| 螺钉和螺母用装配工具 双头呆扳手 扳手长度和头部厚度
| Assembly tools for screws and nuts - Double headed open-ended engineers' wrenches - Length of wrenches and thickness of the heads
|
| ISO 10103-2001
| 螺钉和螺母用装配工具 双头直颈和弯颈梅花扳手 扳手长度和头部厚度
| Assembly tools for screws and nuts - Double-headed, flat and offset, box wrenches - Length of wrenches and thickness of the heads
|
| ISO 10104-2001
| 螺钉和螺母用装配工具 双头高颈和矮颈梅花扳手 扳手长度和头部厚度
| Assembly tools for screws and nuts - Double-headed, deep offset and modified offset, box wrenches - Length of wrenches and thickness of the heads
|
| ISO 10228-1991
| 越野雪橇 捆绑安装区 试验螺钉的要求
| Cross-country skis; binding mounting area; requirements for test screws
|
| ISO 10509-1992
| 六角法兰面自攻螺钉
| Hexagon flange head tapping screws
|
| ISO 10510-1999
| 自攻螺钉和平垫圈组合件
| Tapping screw and washer assemblies with plain washers
|
| ISO 10642-2004
| 内六角孔沉头螺钉
| Hexagon socket countersunk head screws
|
| ISO 10644-1998
| 螺钉和平垫圈组合件 垫圈硬度等级200HV和300HV
| Screw and washer assemblies with plain washers - Washer hardness classes 200 HV and 300 HV
|
| ISO 10664-2005
| 螺栓和螺钉用内板拧的六角花形
| Hexalobular internal driving feature for bolts and screws
|
| ISO 10666-1999
| 自钻自攻螺钉 机械和功能性能
| Drilling screws with tapping screw thread - Mechanical and functional properties
|
| ISO 10669-1999
| 自攻螺钉和垫圈组合件用平垫圈 标准和大系列 产品等级A级
| Plain washers for tapping screw and washer assemblies - Normal and large series - Product grade A
|
| ISO 10673-1998
| 螺钉和垫圈组合件用平垫圈 小、标准和大系列 产品等级A级
| Plain washers for screw and washer assemblies - Small, normal and large series - Product grade A
|
| ISO 1085-1999
| 螺钉和螺母用装配工具 双头扳手 对边尺寸组配
| Assembly tools for screws and nuts - Double-ended wrenches - Size pairing
|
| ISO 10914-1996
| 螺钉和螺母用装配工具 花键传动套筒扳手
| Assembly tools for screws and nuts - Sockets and wrenches for spline drive
|
| ISO 1173-2001
| 螺钉和螺母用装配工具 手动和机动旋转头的传动端及连接部件 尺寸，转矩试验
| Assembly tools for screws and nuts - Drive ends for hand- and machine-operated screwdriver bits and connecting parts - Dimensions, torque testing
|
| ISO 1174-1-1996
| 螺钉和螺母用装配工具 传动方头 第1部分:手动套筒板手的传动方头
| Assembly tools for screws and nuts - Driving squares - Part 1: Driving squares for hand socket tools
|
| ISO 1174-2-1996
| 螺钉和螺母用装配工具 传动方头 第2部分:机动套筒扳手工具的传动方头
| Assembly tools for screws and nuts - Driving squares - Part 2: Driving squares for power socket tools
|
| ISO 1207-1992
| 开槽圆柱头螺钉 产品等级A级
| Slotted cheese head screws; product grade A
|
| ISO 12260-1996
| 航空航天 强度等级小于或等于1100MPa、金属材料制成、有涂覆或未涂覆、短的或中等长度MJ螺纹,阶梯杆型、内
| Aerospace - Screws, pan head, internal offset cruciform ribbed or unripped drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| ISO 12261-1996
| 航空航天 强度等级小于或等于1100MPa、金属材料制成、有涂覆或未涂覆、长长度MJ螺纹、中径杆型、内偏高扭矩
| Aerospace - Screws, pan head, internal offset cruciform ribbed or unripped drive, pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| ISO 13921-1996
| 航空航天.金属材料制涂覆或未涂覆的、强度等级小于或等于1100 MPa、具有大径杆型、短的和中等长度MJ螺纹、
| Aerospace - Screws, 100° reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| ISO 14579-2001
| 内六角头螺钉
| Hexalobular socket head cap screws
|
| ISO 14580 Technical Corrigendum 1-2004
| 内六角圆头螺钉.技术勘误1
| Hexalobular socket cheese head screws; Technical Corrigendum 1
|
| ISO 14580-2001
| 内六角圆头螺钉
| Hexalobular socket cheese head screws
|
| ISO 14583 Technical Corrigendum 1-2004
| 内六角盘头螺钉.技术勘误1
| Hexalobular socket pan head screws; Technical Corrigendum 1 |
| ISO 14583-2001
| 内六角大柱头螺钉
| Hexalobular socket pan head screws
|
| ISO 14584-2001
| 内六角半沉头螺钉
| Hexalobular socket raised countersunk head screws
|
| ISO 14585 Technical Corrigendum 1-2004
| 六角内孔平头攻丝螺钉;技术勘误1
| Hexalobular socket pan head tapping screws; Technical Corrigendum 1
|
| ISO 14585-2001
| 内六角大柱头自攻螺钉
| Hexalobular socket pan head tapping screws
|
| ISO 14586-2001
| 内六角沉头自攻螺钉
| Hexalobular socket countersunk head tapping screws
|
| ISO 14587-2001
| 内六角半沉头（椭圆头）自攻螺钉
| Hexalobular socket raised countersunk (oval) head tapping screws
|
| ISO 1478-1999
| 自攻螺钉用螺纹
| Tapping screws thread
|
| ISO 1479-1983
| 六角头自攻螺钉
| Hexagon head tapping screws
|
| ISO 1481-1983
| 开槽盘头自攻螺钉
| Slotted pan head tapping screws
|
| ISO 1482-1983
| 开槽沉头自攻螺钉(通用头型)
| Slotted countersunk (flat) head tapping screws (common head style)
|
| ISO 1483-1983
| 开槽半沉头自攻螺钉(通用头型)
| Slotted raised countersunk (oval) head tapping screws (common head style)
|
| ISO 15065-2005
| 头部外形符合ISO 7721的沉头螺钉用沉头
| Countersinks for countersunk head screws with head configuration in accordance with ISO 7721
|
| ISO 15480-1999
| 六角凸缘头自钻自攻螺钉
| Hexagon washer head drilling screws with tapping screw thread
|
| ISO 15481-1999
| 十字槽盘头自钻自攻螺钉
| Cross recessed pan head drilling screws with tapping screw thread
|
| ISO 15482-1999
| 十字槽沉头自钻自攻螺钉
| Cross recessed countersunk head drilling screws with tapping screw thread
|
| ISO 15483-1999
| 十字槽半沉头自钻自攻螺钉
| Cross recessed raised countersunk head drilling screws with tapping screw thread
|
| ISO 1580-1994
| 开槽盘头螺钉 产品等级A级
| Slotted pan head screws; product grade A
|
| ISO 1703-2005
| 螺钉和螺母用装配工具.命名和术语
| Assembly tools for screws and nuts - Designation and nomenclature
|
| ISO 1711-1-2007
| 螺钉和螺母用装配工具.技术规范.第1部分:手动扳手和套筒
| Assembly tools for screws and nuts - Technical specifications - Part 1: Hand-operated wrenches and sockets
|
| ISO 1711-2-2005
| 螺钉和螺母用装配工具.技术规范 第2部分:机动套筒(扳手)
| Assembly tools for screws and nuts - Technical specifications - Part 2: Machine-operated sockets ("impact")
|
| ISO 1891-1979
| 螺栓、螺钉、螺母和附件 名词和术语 三种语言版
| Bolts, screws, nuts and accessories; terminology and nomenclature trilingual edition
|
| ISO 2009-1994
| 开槽沉头螺钉(通用头型) 产品等级A级
| Slotted countersunk head screws (common head style); product grade A
|
| ISO 2010-1994
| 开槽半沉头螺钉(通用头型) 产品等级A级
| Countersunk slotted raised head screws (common head style); product grade A
|
| ISO 2236-1991
| 螺钉和螺母用装配工具 锻制的和管状套筒板手 头部最大外形尺寸
| Assembly tools for srews and nuts; forged and tubular socket wrenches; maximum outside head dimensions
|
| ISO 225-1983
| 紧固件 螺栓、螺钉、螺柱和螺母 尺寸代号和标注 三种语言版
| Fasteners; Bolts, screws, studs and nuts; Symbols and designations of dimensions Trilingual edition
|
| ISO 2342-2003
| 有柄开槽无头螺钉
| Slotted headless screws with shank
|
| ISO 2351-1-2007
| 螺钉和螺母用装配工具.机动旋具头.第1部分:一字槽头螺钉用旋具头
| Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 1: Screwdriver bits for slotted head screws
|
| ISO 2351-2-2002
| 螺钉和螺母用装配工具.机动旋具头.第2部分:十字凹头螺钉用旋具头
| Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 2: Screwdriver bits for cross-recessed head screws
|
| ISO 2351-3-2002
| 螺钉和螺母用装配工具.机动旋具头.第3部分:六角凹头螺钉用旋具头
| Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 3: Screwdriver bits for hexagon socket screws
|
| ISO 2380-1-2004
| 螺钉和螺母用装配工具.一字槽螺钉的旋具.第1部分:手动或者机动旋具工作部
| Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 1: Tips for hand- and machine-operated screwdrivers
|
| ISO 2380-2-2004
| 螺钉和螺母用装配工具.一字槽螺钉的旋具.第2部分:手动旋具的一般要求、旋杆长度和标志
| Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers
|
| ISO 2568-1988
| 手用和机用圆螺丝板牙和手用板牙架
| Hand- and machine-operated circular screwing dies and hand-operated die stocks
|
| ISO 262-1998
| ISO一般用途米制螺纹 螺钉、螺栓和螺母的选用尺寸
| ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts
|
| ISO 263-1973
| ISO英制螺纹 直径与螺距系列及螺钉、螺栓和螺母的选用系列 直径范围0.06英寸～6英寸
| ISO inch screw threads; General plan and selection for screws, bolts and nuts; Diameter range 0,06 to 6 in
|
| ISO 2702-1992
| 热处理钢自攻螺钉 机械性能
| Heat-treated steel tapping screws; mechanical properties
|
| ISO 2725-1-2007
| 螺钉和螺母用装配工具.第1部分:手动扳手
| Assembly tools for screws and nuts - Square drive sockets - Part 1: Hand-operated sockets
|
| ISO 2725-2-2007
| 螺钉和螺母用装配工具.方头钻动扳手.第2部分:机动扳手尺寸
| Assembly tools for screws and nuts - Square drive sockets - Part 2: Machine-operated sockets ("impact")
|
| ISO 2725-3-2001
| 螺钉和螺母用装配工具 方头传动套筒 第3部分：机动套筒（非撞击） 尺寸
| Assembly tools for screws and nuts - Square drive sockets - Part 3: Machine-operated sockets ("non impact"); Dimensions
|
| ISO 273-1979
| 紧固件 螺栓和螺钉用通孔
| Fasteners; Clearance holes for bolts and screws
|
| ISO 2936-2001
| 螺钉和螺母用装配工具 内六角扳手
| Assembly tools for screws and nuts - Hexagon socket screw keys
|
| ISO 3202-1997
| 航空航天 强度等级小于或等于1100 MPa、有涂层或无涂层、金属材料制成、带内偏高扭矩十字槽或不打滑扳动结
| Aerospace - Screws, pan head, internal offset cruciform ribbed or unribbed drive, threaded to head, MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| ISO 3266-1984
| 一般起重用的吊环螺钉
| Eyebolts for general lifting purposes
|
| ISO 3315-1996
| 螺钉和螺母用装配工具 手动方榫传动套筒扳手传动件 尺寸和试验
| Assembly tools for screws and nuts - Driving parts for hand-operated square drive socket wrenches - Dimensions and tests
|
| ISO 3316-1996
| 螺钉和螺母用装配工具 手动方榫传动套筒扳手附件 尺寸和试验
| Assembly tools for screws and nuts - Attachments for hand-operated square drive socket wrenches - Dimensions and tests
|
| ISO 3317-1974
| 螺钉和螺母用装配工具 机动工具的六角传动端
| Assembly tools for screws and nuts; Square drive extension hexagon insert, for power socket wrenches
|
| ISO 3318-1990
| 螺钉和螺母用装配工具 双头呆扳手、双头梅花扳手和两用扳手 头部外形最大宽度
| Assembly tools for screws and nuts; double-headed open-ended wrenches, double-headed ring wrenches and combination wrenches; maximum widths of heads
|
| ISO 3506-1-1997
| 耐腐蚀不锈钢紧固件的机械性能 第1部分:螺栓、螺钉和螺柱
| Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 1: Bolts, screws and studs
|
| ISO 3506-3-1997
| 耐腐蚀不锈钢紧固件的机械性能 第3部分:紧定螺钉及类似的不受拉应力的螺纹紧固件
| Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress
|
| ISO 3506-4-2003
| 耐腐蚀不锈钢紧固件的机械特性.第4部分:攻丝螺钉
| Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 4: Tapping screws
|
| ISO 4017-1999
| 六角头螺钉 产品等级A和B级
| Hexagon head screws - Product grades A and B
|
| ISO 4018-1999
| 六角头螺钉 产品等级C级
| Hexagon head screws - Product grade C
|
| ISO 4026-2003
| 内六角平端定位螺钉
| Hexagon socket set screws with flat point
|
| ISO 4027-2003
| 内六角锥头定位螺钉
| Hexagon socket set screws with cone point
|
| ISO 4028-2003
| 内六角制动端定位螺钉
| Hexagon socket set screws with dog point
|
| ISO 4029-2003
| 内六角圆端定位螺钉
| Hexagon socket set screws with cup point
|
| ISO 4229-1977
| 螺钉和螺母用装配工具 开口为50mm～120mm的单头扳手
| Assembly tools for screws and nuts; Single-head engineer's wrenches; Gaps from 50 to 120 mm
|
| ISO 4757-1983
| 螺钉用十字槽
| Cross recesses for screws
|
| ISO 4759-1-2000
| 紧固件公差 第1部分:螺栓、螺钉、螺栓和螺母 产品等级A、B和C级
| Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts - Product grades A, B and C
|
| ISO 4759-3-2000
| 紧固件公差 第3部分:螺栓、螺钉和螺母用平垫圈 产品等级为A和C级
| Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts - Product grades A and C
|
| ISO 4762-2004
| 内六角螺钉
| Hexagon socket head cap screws
|
| ISO 4766-1983
| 开槽平端紧定螺钉
| Slotted set screws with flat point
|
| ISO 5414-1-2002
| 扁方柄刀具用螺钉压紧刀具夹(立铣刀刀夹).第1部分:刀柄驱动系统的尺寸
| Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools - Part 1: Dimensions of the driving system of tool shanks
|
| ISO 5414-2-2002
| 扁方柄刀具用螺钉压紧刀具夹(立铣刀刀夹).第2部分:夹头的连接尺寸和名称与符号
| Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools - Part 2: Connecting dimensions of chucks and designation
|
| ISO 5415-1977
| 带7/24外圆锥和莫氏内圆锥缩径套筒和连接螺钉
| Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw
|
| ISO 5835-1991
| 外科植入物 不对称螺纹、六角头、球形下表面金属骨螺钉 尺寸
| Implants for surgery; metal bone screws with hexagonal drive connection, spherical under-surface of head, asymmetrical thread; dimensions
|
| ISO 5836-1988
| 外科植入物 金属接骨板 与不对称螺纹、球形下表面螺钉对应的孔
| Implants for surgery; metal bone plates; holes corresponding to screws with asymmetrical thread and spherical under-surface
|
| ISO 5856-1991
| 航空航天 强度等级小于或等于1100 MPa、金属材料制成、有涂层或无涂层、带有中或短长度MJ螺纹、大径杆型及
| Aerospace; screws, 100 normal countersunk head, internal offset cruciform ribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions
|
| ISO 6004-1991
| 高山雪橇 雪橇紧固螺钉 要求
| Alpine skis; ski binding screws; requirements
|
| ISO 6005-1991
| 高山雪橇 雪橇紧定螺钉 试验方法
| Alpine skis; ski binding screws; test methods
|
| ISO 6157-1-1988
| 紧固件 表面缺陷 第1部分:螺栓、螺钉和螺柱特殊要求
| Fasteners surface discontinuities; part 1: bolts, screws and studs for general requirements
|
| ISO 6157-3-1988
| 紧固件 表面缺陷 第3部分:螺栓、螺钉和螺柱特殊要求
| Fasteners; surface discontinuities; part 3: bolts, screws and studs for special requirements
|
| ISO 6410-1-1993
| 技术制图 螺钉和螺纹部件 第1部分:通用规范
| Technical drawings; screw threads and threaded parts; part 1: general conventions
|
| ISO 6410-2-1993
| 技术制图 螺钉和螺纹部件 第2部分:螺纹嵌镶件
| Technical drawings; screw threads and threaded parts; part 2: screw thread inserts
|
| ISO 6410-3-1993
| 技术制图 螺钉和螺纹部件 第3部分:简化表示
| Technical drawings; screw threads and threaded parts; part 3: simplified representation
|
| ISO 6475-1989
| 外科植入物 不对称螺纹和球形下表面的金属接骨螺钉 机械性能要求和试验方法
| Implants for surgery; metal bone screws with asymmetrical thread and spherical under-surface; mechanical requirements and test methods
|
| ISO 6787-2001
| 螺钉和螺母用装配工具 活扳手
| Assembly tools for screws and nuts - Adjustable wrenches
|
| ISO 6788-1997
| 螺钉和螺母用装配工具 十字柄套筒扳手 尺寸和扭矩试验
| Assembly tools for screws and nuts - Four-way socket wrenches - Dimensions and torque test
|
| ISO 6789-2003
| 螺钉和螺母用装配工具.手动转矩工具.设计一致性试验、质量一致性试验和重新校准程序的要求和试验方法
| Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure
|
| ISO 691-2005
| 螺钉和螺母用装配工具.扳手和套筒扳手的开口.常用公差
| Assembly tools for screws and nuts - Wrench and socket openings - Tolerances for general use
|
| ISO 7045-1994
| H型或Z型十字槽盘头螺钉 产品等级A级
| Pan head screws with type H or type Z cross recess; product grade A
|
| ISO 7046-1-1994
| H型或Z型十字槽沉头(通用头型)螺钉 产品等级A级 第1部分:性能等级 钢4.8级
| Countersunk flat head screws (common head style) with type H or type Z cross recess; product grade A; part 1: steel of property class 4.8
|
| ISO 7046-2-1990
| 十字槽沉头(通用头型)螺钉 产品等级A级 第2部分:性能等级钢8.8级、不锈钢和有色金属
| Cross recessed countersunk flat head screws (common head style); grade A; part 2: steel of property class 8.8, stainless steel and non-ferrous metals
|
| ISO 7047-1994
| H型或Z型十字槽半沉头(通用头型)螺钉 产品等级A级
| Countersunk raised head screws (common head style) with type H or type Z cross recess; product grade A
|
| ISO 7048-1998
| 十字槽圆柱头螺钉
| Cross recessed cheese head screws
|
| ISO 7049-1983
| 十字槽盘头自攻螺钉
| Cross recessed pan head tapping screws
|
| ISO 7050-1983
| 十字槽沉头(通用头型)自攻螺钉
| Cross recessed countersunk (flat) head tapping screws (common head style)
|
| ISO 7051-1983
| 十字槽半沉头(通用头型)自攻螺钉
| Cross recessed raised countersunk (oval) head tapping screws
|
| ISO 7053-1992
| 六角凸缘自攻螺钉
| Hexagon washer head tapping screws
|
| ISO 7085-1999
| 表面淬硬并回火的米制自挤螺钉机械和工作性能要求
| Mechanical and performance requirements of case hardened and tempered metric thread rolling screws
|
| ISO 7378-1983
| 紧固件 螺栓、螺钉和螺柱 开口销孔和金属丝孔
| Fasteners; Bolts, screws and studs; Split pin holes and wire holes
|
| ISO 7379-1983
| 内六角圆柱头轴肩螺钉
| Hexagon socket head shoulder screws
|
| ISO 7380-2004
| 内六角平圆头螺钉
| Hexagon socket button head screws
|
| ISO 7434-1983
| 开槽锥端紧定螺钉
| Slotted set screws with cone point
|
| ISO 7435-1983
| 开槽长圆柱端紧定螺钉
| Slotted set screws with long dog point
|
| ISO 7436-1983
| 开槽凹端紧定螺钉
| Slotted set screws with cup point
|
| ISO 7721-1983
| 沉头螺钉 头部形状和测量
| Countersunk head screws; Head configuration and gauging
|
| ISO 7721-2-1990
| 沉头螺钉 第2部分:十字槽插入深度
| Countersunk flat head screws; part 2: penetration depth of cross recesses
|
| ISO 7738-2001
| 螺钉和螺母用装配工具 两用扳手 扳手长度和头部最小厚度
| Assembly tools for screws and nuts - Combination wrenches - Lengths of wrenches and maximum thickness of heads
|
| ISO 7794-1991
| 越野雪橇 雪橇紧固螺钉 要求
| Cross-country skis; ski binding screws; requirements
|
| ISO 7795-1994
| 越野雪橇 雪橇紧固螺钉 试验方法
| Cross-country skis - Ski-binding screws - Test methods
|
| ISO 7913-1994
| 航空航天 米制螺栓和螺钉的形状和位置公差
| Aerospace - Bolts and screws, metric - Tolerances of form and position
|
| ISO 8319-1-1996
| 矫形外科器械 扳动连接件 第1部分:内六角螺钉用扳手
| Orthopaedic instruments - Drive connections - Part 1: Keys for use with screws with hexagon socket heads
|
| ISO 8319-2-1986
| 矫形外科器械 扳动连接件 第2部分:一字槽头、十字槽和十字槽头螺钉的旋凿
| Orthopaedic instruments; Drive connections; Part 2 : Screwdrivers for single slot head screws, screws with cruciate slot and cross-recessed head screws
|
| ISO 8662-7-1997
| 便携式手提动力工具 手柄振动测量 第7部分:具有冲击、脉冲或棘轮作用力的扳手、螺丝刀和拧螺母机
| Hand-held portable power tools - Measurement of vibrations at the handle - Part 7: Wrenches, srewdrivers and nut runners with impact, impulse or ratched action
|
| ISO 8676-1999
| 米制细牙六角头螺钉 产品等级A和B级
| Hexagon head screws with metric fine pitch thread - Product grades A and B
|
| ISO 8764-1-2004
| 螺钉和螺母用装配工具.十字槽头螺钉用旋具.第1部分:驱动头
| Assembly tools for screws and nuts - Screwdrivers for cross-recessed head screws - Part 1: Driver tips
|
| ISO 8764-2-2004
| 螺钉和螺母用装配工具.十字槽头螺钉用旋具.第2部分:手动旋具刀身长度和标记的一般要求
| Assembly tools for screws and nuts - Screwdrivers for cross-recessed head screws - Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers
|
| ISO 8839-1986
| 紧固件机械性能 有色金属制造的螺栓、螺钉、螺柱和螺母
| Mechanical properties of fasteners; Bolts, screws, studs and nuts made of non-ferrous metals
|
| ISO 885-2000
| 普通螺栓和螺钉 米制系列 头下圆角半径
| General purpose bolts and screws - Metric series - Radii under the head
|
| ISO 887 Technical Corrigendum 1-2006
| 通用米制螺栓、螺钉和螺母用普通垫圈.一般示意图.技术勘误1
| Plain washers for metric bolts, screws and nuts for general purposes - General plan; Technical Corrigendum 1
|
| ISO 887-2000
| 米制普通螺栓、螺钉和螺母用平垫圈 总方案
| Plain washers for metric bolts, screws and nuts for general purposes - General plan
|
| ISO 888-1976
| 螺栓、螺钉和螺柱 普通螺栓的公称长度及螺纹长度
| Bolts, screws and studs; Nominal lengths, and thread lengths for general purpose bolts
|
| ISO 898-1-1999
| 碳钢和铸钢制造的紧固件机械性能 第1部分:螺栓、螺钉和螺柱
| Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs
|
| ISO 898-5-1998
| 碳钢和铸钢制造的紧固件机械性能 第5部分:紧定螺钉及类似的不受拉应力的螺纹紧固件
| Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners not under tensile stresses
|
| ISO 898-7-1992
| 紧固件机械性能 第7部分:螺栓与螺钉的扭矩试验和最小扭矩公称直径1mm～10mm
| Mechanical properties of fasteners; part 7: torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
|
| ISO 8992-2005
| 紧固件.螺栓、螺钉、螺柱和螺母通用技术条件
| Fasteners - General requirements for bolts, screws, studs and nuts
|
| ISO 9087-1998
| 木材 轴向荷载作用下钉子和螺钉固着力的确定
| Wood - Determination of nail and screw holding power under axial load application
|
| ISO 9268-1988
| 外科植入物 具有锥形下表面头部的金属接骨螺钉 尺寸
| Implants for surgery; metal bone screws with conical under-surface of head; dimensions
|
| ISO 9269-1988
| 外科植入物 金属接骨板 与锥形下表面螺钉对应的孔和槽
| Implants for surgery; metal bone plates; holes and slots corresponding to screws with conical under-surface
|
| 编号 | 中文名称 | 英文名称 |
|---|