| 编号 | 中文名称 | 英文名称 |
|---|
| ANSI B93.95M-1987
| 液压气动用容积式泵、马达、整体传输.稳态性能的测量
| Hydraulic Fluid Power - Positive Displacement Pumps, Motors, and Integral Transmissions - Determination of Steady-State Performance
|
| ANSI Z21.40.1-1996
| 燃气、热激活空气调节和热泵设施
| Gas-Fired, Heat Activated Air Conditioning and Heat Pump Appliances
|
| ANSI Z21.40.1a-1997
| 燃气激活空气调节和热泵器具的安全性和结构
| Safety and Construction of Gas-Fired, Heat Activated Air-Conditioning and Heat Pump Appliances
|
| ANSI Z21.40.2-1996
| 燃气、工作激活空气调节和热泵器具（内然）
| Gas-Fired, Work Activated Air-Conditioning and Heat Pump Appliances (Internal Combustion)
|
| ANSI Z21.40.2a-1997
| 燃气、工作激活空气调节和热泵器具(同 CGA 2.92a)
| Gas-Fired, Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2.92a)
|
| ANSI Z21.40.4-1996
| 燃气、空气调节和热泵器具的性能试验和额定值
| Performance Testing and Rating of Gas-Fired, Air Conditioning and Heat Pump Appliances
|
| ANSI Z21.40.4a-1997
| 燃气、空气调节和热泵器具的性能试验和额定值(同 CGA 2.94a)
| Performance Testing and Rating of Gas-Fired, Air-Conditioning and Heat Pump Appliances (same as CGA 2.94a)
|
| ANSI/AAMI ID26-2004
| 医疗电气设备.第2部分:注液泵和控制器安全的特殊要求
| Medical Electrical Equipment - Part 2: Particular Requirements for the Safety of Infusion Pumps and Controllers
|
| ANSI/API 610-2002
| 一般精炼设备用离心泵
| Centrifugal Pumps for General Refinery Services
|
| ANSI/API 682-2004
| 泵.离心泵和回转泵的轴密封装置
| Pumps - Shaft Sealing Systems for Centrifugal and Rotary Pumps
|
| ANSI/API 685-1999
| 用于石油、重型化工和燃气行业的非密封离心泵
| Sealless Centrifugal Pumps for Petroleum, Heavy Duty Chemical and Gas Industry Services
|
| ANSI/API RP-11S1-1998
| 电潜水泵拆卸报告
| Electrical Submersible Pump Teardown Report
|
| ANSI/API RP11S 1-1987
| 电动潜水泵拆卸报告
| Electrical Submersible Pump Teardown Report
|
| ANSI/ARI 310/380-1993
| 组装终端的空气调节装置与蒸汽泵
| Packaged Terminal Air-Conditioners and Heat Pumps
|
| ANSI/ARI 330-1993
| 地热源闭合循环热泵
| Ground Source Closed-Loop Heat Pumps
|
| ANSI/ARI 340/360-2000
| 商用和工业用统一空气调节和热泵设备
| Commercial and Industrial Unitary Air-Conditioning and Heat Pump Equipment
|
| ANSI/ARI 500-2001
| 空气调节和热泵设施用不同容积的容积式冷冻剂压缩机和压缩机部件
| Variable Capacity Positive Displacement Refrigerant Compressors and Compressor Units for Air-Conditioning and Heat Pump Applications
|
| ANSI/ARI 870-2001
| 直接土工交换热泵
| Direct GeoExchange Heat Pumps
|
| ANSI/ARI/ASHRAE/ISO 13256-1-1998
| 水源热力泵.性能试验和额定值测量.第1部分:水-空气和盐水-空气热力泵
| Water-Source Heat Pumps - Testing and Rating for Performance: Part 1 - Water-to-Air and Brine-to-Air Heat Pumps
|
| ANSI/ARI/ASHRAE/ISO 13256-2-1998
| 水源热力泵.性能试验和额定值测量.第2部分:水-水和盐水-水热力泵
| Water-Source Heat Pumps - Testing and Rating for Performance: Part 2 - Water-to-Water and Brine-to-Water Heat Pumps
|
| ANSI/ASHRAE 116-1995
| 单体空调和热泵季节热效率的试验方法
| Seasonal Efficiency of Unitary Air Conditioners and Heat Pumps, Methods of Testing for
|
| ANSI/ASHRAE 37-2005
| 电动整体空调和热泵设备的额定值试验方法
| Methods of Testing for Rating Electrically Driven Unitary Air-Conditioning and Heat Pump Equipment
|
| ANSI/ASHRAE Standard116-1995
| 单式空调器和热泵的季节效应试验方法
| Seasonal Efficiency of Unitary Air Conditioners and Heat Pumps, Methods of Testing for
|
| ANSI/ASME A112.18.3-2002
| 泵固定件接头中防回流装置和系统的性能要求
| Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings
|
| ANSI/ASME B73.1M-2001
| 化工用卧式端吸离心泵规范
| Horizontal End Suction Centrifugal Pumps for Chemical Process, Specifications for
|
| ANSI/ASME B73.2M-2003
| 化工用立式直列式离心泵规范
| Vertical In-Line Centrifugal Pumps for Chemical Process, Specifications for
|
| ANSI/ASME B73.5M-1995
| 化工用热塑性和热固性聚合材料卧式端吸离心泵规范
| Specification for Thermoplastic and Thermoset Polymer Material Horizontal End Suction Centrifugal Pumps for Chemical Process
|
| ANSI/ASME PTC18-2002
| 水轮机和泵.涡轮机
| Hydraulic Turbines and Pump - Turbines
|
| ANSI/ASTM D2809-1999
| 发动机冷却剂对铝泵的气蚀和侵蚀特性测试方法
| Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps with Engine Coolants
|
| ANSI/ASTM D3829-2002
| 发动机油的边界泵抽温度的预测试验(05.02)
| Predicting the Borderline Pumping Temperature of Engine Oil, Test for (05.02)
|
| ANSI/ASTM D6813a-2002
| 活塞泵的液压流体性能的评定指南
| Guide for the Performance Evaluation of Hydraulic Fluids for Piston Pumps
|
| ANSI/ASTM D6898-2003
| 用喷油泵装置评价柴油润滑性的试验方法
| Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig
|
| ANSI/ASTM D6973-2005
| 高压定容叶轮泵中石油液压液耐磨特性指示的试验方法
| Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
|
| ANSI/ASTM D7043a-2004
| 固定容量离心泵中石油和非石油液压液磨损特性指示的试验方法
| Test Method for Indicating Wear Characteristics of Petroleum and Non-petroleum Hydraulic Fluids in a Constant Volume Vane Pump
|
| ANSI/ASTM F1510-2001
| 商用船只旋转式正排量泵规范
| Specification for Rotary Positive Displacement Pumps, Commercial Ships Use
|
| ANSI/ASTM F1718-2001
| 旋转式正排量燃料泵规范
| Specification for Rotary Positive Displacement Fuel Pumps
|
| ANSI/ASTM F998-2004
| 船用离心泵规范
| Specification for Centrifugal Pump, Shipboard Use
|
| ANSI/HI 1.1-1.2-2000
| 离心泵.术语、定义、应用和操作
| Centrifugal Pumps - Nomenclature, Definitions, Application and Operation
|
| ANSI/HI 1.3-2000
| 离心泵.水平基板设计
| Centrifugal Pumps - Horizontal Baseplate Design
|
| ANSI/HI 1.4-2000
| 离心泵.命名、定义、应用和操作
| Centrifugal Pumps - Nomenclature, Definitions, Application and Operation
|
| ANSI/HI 1.6-2000
| 离心泵测试
| Centrifugal Pump Test
|
| ANSI/HI 10.1-10.5-2004
| 风动泵的名称、定义、应用和操作
| Air-Operated Pumps for Nomenclature, Definitions, Application, and Operation
|
| ANSI/HI 10.6-2004
| 风动泵的试验
| Air-Operated Pump Tests
|
| ANSI/HI 11.6-2001
| 潜水泵测试
| Submersible Pump Tests
|
| ANSI/HI 12.1-12.6-2005
| 离心式淤浆泵的名词定义、应用和操作
| Rotodynamic Centrifugal Slurry Pumps For Nomenclature Definitions, Applications and Operation-2005
|
| ANSI/HI 2.1-2.2-2000
| 立式泵的命名和定义
| Vertical Pumps for Nomenclature and Definitions
|
| ANSI/HI 2.3-2000
| 立式泵的设计和应用
| Vertical Pumps for Design and Application
|
| ANSI/HI 2.4-2000
| 立式泵.术语、定义、应用和操作
| Vertical Pumps for Nomenclature, Definitions, Application and Operation
|
| ANSI/HI 2.6-2000
| 立式泵测试
| Vertical Pump Test
|
| ANSI/HI 3.1-3.5-2000
| 旋转式泵.术语、定义、应用和操作
| Rotary Pump Standards for Nomenclature, Definitions, Applications and Operation
|
| ANSI/HI 3.6-2000
| 旋转式泵测试
| Rotary Pump Test
|
| ANSI/HI 4.1-4.6-2000
| 无密封旋转式泵.术语、定义、应用、操作和测试
| Sealless Rotary Pumps - Nomenclature, Definitions, Applications, Operation and Test
|
| ANSI/HI 5.1-5.6-2000
| 无密封离心泵.术语、定义、应用、操作和测试
| Sealless Centrifugal Pumps for Nomenclature, Definitions, Application, Operation and Test
|
| ANSI/HI 6.1-6.5-2000
| 循环泵.术语、定义、应用和操作
| Reciprocating Power Pump Standards for Nomenclature, Definitions, Application, and Operation
|
| ANSI/HI 6.6-2000
| 循环泵测试
| Reciprocating Pump Test
|
| ANSI/HI 8.1-8.5-2000
| 蒸汽直动活塞泵.术语、定义、应用和操作
| Direct Acting Steam Pumps for Nomenclature, Definitions, Application, and Operation
|
| ANSI/HI 9.1-9.5-2000
| 泵通用标准.类型、定义、应用和声测量
| General Pump Standards for Types, Definitions, Application, and Sound Measurements
|
| ANSI/HI 9.3.3-1997
| 泵:聚合材料选择
| Pumps: Polymer Material Selection
|
| ANSI/HI 9.6.2-2001
| 离心泵和立式泵.最大喷嘴负荷
| Centrifugal and Vertical Pumps for Allowable Nozzle Loads
|
| ANSI/HI 9.6.3-1997
| 泵.允许操作范围
| Pumps - Allowable Operating Region
|
| ANSI/HI 9.6.4-2000
| 离心泵和立式泵.振动测量和容许值
| Centrifugal and Vertical Pumps for Vibration Measurement and Allowable Values
|
| ANSI/HI 9.6.5-2000
| 离心泵和立式泵.状况监测
| Centrifugal and Vertical Pumps for Condition Monitoring
|
| ANSI/HI 9.6.7-2004
| 液体粘度对旋转动态(离心和立式)泵性能的影响
| Effects of Liquid Viscosity on Rotodynamic (Centrifugal and Vertical) Pump Performance
|
| ANSI/HI 9.8-1998
| 泵入口设计
| Pump Intake Design
|
| ANSI/IEEE 1017-2004
| 潜水电泵电缆的现场试验推荐规范
| Recommended Practice for Field Testing Electric Submersible Pump Cable
|
| ANSI/IEEE 1018-2004
| 规定潜水电泵电缆用推荐规程.乙烯-丙烯橡胶绝缘
| Recommended Practice for Specifying Electric Submersible Pump Cable - Ethylene-Propylene Rubber Insulation
|
| ANSI/IEEE 1019-2004
| 规定潜水电泵电缆用推荐规程.聚丙烯绝缘
| Recommended Practice for Specifying Electric Submersible Pump Cable - Polypropylene Insulation
|
| ANSI/NFPA 1911-2002
| 消防部门的泵吸装置的试验
| Testing Fire Department Pumping Apparatus
|
| ANSI/SAE J1668-1993
| 柴油机燃油喷射泵的试验
| Diesel Engines-Fuel Injection Pump Testing
|
| ANSI/SAE J626-1998
| 柴油喷射.燃料喷射泵用端头安装法兰
| Diesel Fuel Injection - End Mounting Flanges for Fuel Injection Pumps
|
| ANSI/TIA-455-212-2000
| FOTP212.IEC 61290-6-1.光纤放大器.基础规范.第6-1部分:泵泄漏参数的测试方法.光学多路分解器
| FOTP212 - IEC 61290-6-1 - Optical Fibre Amplifiers - Basic Specification Part 6-1: Test Methods for Pump Leakage Parameters- Optical Demultiplexer
|
| ANSI/TIA/EIA 455-212-2000
| FOTP212-IEC 61290-6-1-光纤放大器. 基本规范.第6-1部分:泵泄漏参数测试方法.光多路分配器
| FOTP212 - IEC 61290-6-1 - Optical Fibre Amplifiers - Basic Specification Part 6-1: Test Methods for Pump Leakage Parameters- Optical Demultiplexer
|
| ANSI/UL 1247-2004
| 驱动离心消防泵用柴油发动机
| Diesel Engines for Driving Centrifugal Fire Pumps
|
| ANSI/UL 1450-2005
| 电动空气压缩机、真空泵和涂漆设备的安全标准
| Standard for Safety for Motor-Operated Air Compressors, Vacuum Pumps, and Painting Equipment
|
| ANSI/UL 1453-2004
| 水加热器、电增压泵和商用贮水箱
| Water Heaters, Electric Booster and Commercial Storage Tank
|
| ANSI/UL 1478-2004
| 消防水泵减压阀
| Fire Pump Relief Valves
|
| ANSI/UL 218-2005
| 消防泵控制器的安全标准
| Standard for Safety for Fire Pump Controllers
|
| ANSI/UL 218A-2004
| 柴油发动机驱动的离心消防泵用蓄电池接触器
| Battery Contactors for Use in Diesel Engines Driving Centrifugal Fire Pumps
|
| ANSI/UL 448-2004
| 消防泵
| Pumps for Fire Protection Service
|
| ANSI/UL 51-1999
| 用于液化石油气和无水氨的动力操作泵
| Power-Operated Pumps for Anhydrous Ammonia and LP-Gas
|
| ASME B5.28-1971
| 机床润滑和冷却泵的装配尺寸
| (Mounting dimensions of lubricating and coolant pumps for machine tools)
|
| ASME B73.1-2001
| 化工用卧式端吸离心泵规范
| (Specification for horizontal end suction centrifugal pumps for chemical process)
|
| ASME B73.2M-1991
| 化工用立式直列式离心泵规范
| (Specification for vertical in-line centrifugal pumps for chemical process)
|
| ASME B73.5M-1995
| 化工处理用热塑和热固性聚合材料制水平端头吸入式离心泵规范
| (Specification for thermoplastic and thermoset polymer material horizontal end suction centrifugal pumps for chemical process)
|
| ASME PTC 7-1949
| 往复式蒸汽驱动活塞泵
| (Reciprocating steam-driven displacement pumps)
|
| ASME PTC 7.1-1962
| 活塞泵
| (Displacement pumps)
|
| ASME PTC 8.2-1990
| 离心泵
| (Centrifugal pumps)
|
| ASME PTC 9 Erratum-1972
| 容积式压缩机,真空泵和鼓风机.正误表
| (Displacement compressors, vacuum pumps, and blowers; Erratum)
|
| ASME PTC 9-1970
| 容积式压缩机,真空泵和鼓风机
| (Displacement compressors, vacuum pumps, and blowers)
|
| ASME Y14.40.9-2002
| 图示用图形符号.第9部分:泵、压缩机和风扇
| (Graphical symbols for diagrams - Part 9: Pumps, compressors and fans)
|
| ASTM D 2809-2004
| 带有发动机冷却剂的铝泵的气蚀和侵蚀特性的标准试验方法
| Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
|
| ASTM D 3245-2003
| 工业燃油的泵抽油能力标准试验方法
| Standard Test Method for Pumpability of Industrial Fuel Oils
|
| ASTM D 3829-2002
| 预测发动机油边界泵送温度的标准试验方法
| Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil
|
| ASTM D 3890-2005
| 起动机械泵计量器的行程数的标准试验方法
| Standard Test Method for Number of Strokes to Prime a Mechanical Pump Dispenser
|
| ASTM D 4041-2005
| 测定手动泵分配器喷射模式的标准试验方法
| Standard Test Method for Determining Spray Patterns of Manually Operated Pump Dispensers
|
| ASTM D 4133-1982
| 用泵取样可繁殖海洋浮游生物的标准实施规程
| Standard Practice for Sampling Phytoplankton with Pumps
|
| ASTM D 4333-2005
| 机械泵计量器元件不兼容性的标准试验方法
| Test Method for the Compatibility Resistance of Mechanical Pump Dispenser Components
|
| ASTM D 4334-2005
| 测定机械泵计量器浸入管保持力的标准试验方法
| Standard Test Method for the Determination of the Dip Tube Retention of a Mechanical Pump Dispenser
|
| ASTM D 4335-1999
| 机械泵加注器元件保持力测定的标准试验方法
| Standard Test Method for Determination of Component Retention of a Mechanical Pump Dispenser
|
| ASTM D 4336-2005
| 测定机械泵计量器每行程输出功率的标准试验方法
| Standard Test Methods for Determination of the Output Per Stroke of a Mechanical Pump Dispenser
|
| ASTM D 5337-2004
| 小型取样泵校正用流率的标准规程
| Standard Practice for Flow Rate for Calibration of Personal Sampling Pumps
|
| ASTM D 6034-1996
| 通过一连续比率的泵试验对限制性含水层内生产井效率测定的标准试验方法
| Standard Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test
|
| ASTM D 6534-2005
| 测定机械泵分配器最大推动力的标准试验方法
| Standard Test Method for Determining the Peak Force-to-Actuate a Mechanical Pump Dispenser
|
| ASTM D 6535-2005
| 测定机械泵计量器浸入管长度的标准试验方法
| Standard Test Method for Determining the Dip Tube Length of a Mechanical Pump Dispenser
|
| ASTM D 6536-2000
| 测定机械泵计量器浸入管长度的标准试验方法
| Standard Test Method for Measuring the Dip Tube Length of a Mechanical Pump Dispenser
|
| ASTM D 6633-2005
| 机械泵分配器的基本功能稳定性的标准试验方法
| Standard Test Method for Basic Functional Stability of a Mechanical Pump Dispenser
|
| ASTM D 6654-2005
| 机械泵分配器基本储存稳定性的标准试验方法
| Standard Test Method for Basic Storage Stability of a Mechanical Pump Dispenser
|
| ASTM D 6655-2001
| 与机械泵分配器有关的标准术语
| Standard Terminology Relating to Mechanical Pump Dispensers
|
| ASTM D 6813a-2002
| 活塞泵的液压液性能评定的标准指南
| Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps
|
| ASTM D 6834-2002
| 测定有机械泵分配器的包装的产品泄漏率的标准试验方法
| Standard Test Method for Determining Product Leakage from a Package with a Mechanical Pump Dispenser
|
| ASTM D 6898-2003
| 用喷油泵装置评价柴油润滑性的标准试验方法
| Standard Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig |
| ASTM D 6973-2005
| 高压定容叶轮泵中石油液压液磨损特性指示的标准试验方法
| Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
|
| ASTM D 7043a-2004
| 定容叶轮泵中石油和非石油液压液的磨损特性指示的标准试验方法
| Standard Test Method for Indicating Wear Characteristics of Petroleum and Non-Petroleum Hydraulic Fluids in a Constant Volume Vane Pump
|
| ASTM E 1198-1987
| 用泵对浮游生物取样的标准实施规程
| Standard Practice for Sampling Zooplankton with Pumps
|
| ASTM E 295-1982
| 测量油扩散泵速度的试验方法
| Standard Test Method for Measured Speed of Oil Diffusion Pumps
|
| ASTM F 1510-2001
| 商业船用旋转式正排量泵标准规范
| Standard Specification for Rotary Positive Displacement Pumps, Commercial Ships Use
|
| ASTM F 1607-1995
| 漏油响应泵试验性能数据报告的标准指南
| Standard Guide for Reporting of Test Performance Data for Oil Spill Response Pumps
|
| ASTM F 1718-2001
| 旋转式正排量蒸馏燃油泵标准规范
| Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
|
| ASTM F 1830-1997
| 评价玻璃试管内血泵用血液的选择的标准操作规程
| Standard Practice for Selection of Blood for In Vitro Evaluation of Blood Pumps
|
| ASTM F 1841-1997
| 连续流动血泵里溶血评定的标准操作规程
| Standard Practice for Assessment of Hemolysis in Continuous Flow Blood Pumps
|
| ASTM F 998-2004
| 船用离心泵标准规范
| Standard Specification for Centrifugal Pump, Shipboard Use
|
| UL 1004A-2001
| 消防泵电动机
| (Fire pump motors )
|
| UL 1113-2004
| 船舶不可燃液体用电动泵
| (Electrically operated pumps for nonflammable liquids, marine )
|
| UL 1130-1999
| 船用机械和电子控制燃油泵
| (Mechanically and electrically operated fuel pumps for marine use )
|
| UL 1207-2001
| 危险场所用污水泵
| (Sewage pumps for use in hazardous (classified) locations )
|
| UL 1247-1995
| 防火离心泵驱动用柴油机
| (Diesel engines for driving centrifugal fire pumps )
|
| UL 1450-2003
| 电动空气压缩机、真空泵和喷漆设备
| (Motor-operated air compressors, vacuum pumps, and painting equipment)
|
| UL 1478-1995
| 消防泵减压阀
| (Fire pumps relief valves )
|
| UL 218-1996
| 防火泵控制器
| (Fire pump controllers )
|
| UL 218A-2004
| 柴油机中驱动离心点火泵用电池接头标准
| (Standard for battery contactors for use in diesel engines driving centrifugal fire pumps )
|
| UL 343-1997
| 燃油设备用泵
| (Pumps for oil-burning appliances )
|
| UL 448-1994
| 消防装置用泵
| (Pumps for fire-protection service )
|
| UL 51-2002
| 使用无水液氨和液化石油气的动力操纵泵
| (Power-operated pumps for anhydrous ammonia and LP-gas )
|
| UL 778-2002
| 电动水泵
| (Motor-operated water pumps )
|
| UL 79-1996
| 石油产品输送系统用动力泵
| (Power-operated pumps for petroleum dispensing products )
|
| 编号 | 中文名称 | 英文名称 |
|---|