| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| BB/T 0025-2004 | 聚三氟氯乙烯塑料衬里截止阀 | () |
| BB/T 0043-2007 | 塑料物流周转箱 | () |
| BB/T 0044-2007 | 包装容器 塑料农药瓶 | () |
| CP 312-1-1973 | 塑料管道(热塑材料)实用规程.第1部分:一般原理和材料选择 | Code of practice for plastics pipework (thermoplastics material). General principles and choice of material |
| CP 312-2-1973 | 塑料管道(热塑材料)实用规程.第2部分:压力液体输送用非增塑PVC管 | Code of practice for plastics pipework (thermoplastics material). Unplasticized PVC pipework for the conveyance of liquids under pressure |
| DD ENV 1401-2-2001 | 非压力地下废水排放和污水系统的塑料管道系统.非增塑聚氯乙烯.符合性评定指南 | Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinylchloride) (PVC-U). Guidance for assessment of conformity |
| DD ENV 1452-6-2002 | 供水用塑料管道系统.未增塑聚氯乙烯(PVC-U).安装指南 | Plastics piping systems for water supply. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for installation |
| DL/T 622-1997(2005) | 立式水轮发电机弹性金属塑料推力轴瓦技术条件 | () |
| DL/T 742-2001 | 冷却塔塑料部件技术条件 | () |
| DL/T 802.2-2007 | 电力电缆用导管技术条件 第2部分：玻璃纤维增强塑料电缆导管 | Technical requirements for electric cable conduits Part 2:Cable conduits of fiberglass reinforced plastics |
| DL/T 802.3-2007 | 电力电缆用导管技术条件 第3部分：氯化聚氯乙烯及硬聚氯乙烯塑料电缆导管 | Technical requirements for electric cable conduits Part 3:Cable conduits of chlorinated polyvinyl chloride and unplasticized polyvinyl chloride |
| DL/T 802.4-2007 | 电力电缆用导管技术条件 第4部分：氯化聚氯乙烯及硬聚氯乙烯塑料双壁波纹电缆导管 | Technical requirements for electric cable conduits Part 4:Double wall corrugated cable conduits of chlorinated polyvinyl chloride and unplasticized polyvinyl chloride |
| FZ 93004-1991 | 纺纱和捻线用塑料钩 | () |
| FZ 93010-1991 | 换梭式梭子用塑料纬纱管 | () |
| FZ/T 90003.1-1991 | 塑料经纱管和纬纱管试验方法静弯曲 | () |
| FZ/T 90003.2-1991 | 塑料经纱管和纬纱管试验方法冲击功 | () |
| FZ/T 90003.3-1991 | 塑料经纱管和纬纱管试验方法振幅 | () |
| FZ/T 90080.1-1995 | 纺织用塑料投梭结试验方法 球压痕硬度 | () |
| FZ/T 90080.2-1995 | 织机用塑料投梭结试验方法 冲击强度 | () |
| FZ/T 92044-1995 | 酚醛塑料槽筒 | () |
| FZ/T 93004-2002(2009) | 纺纱和捻线用塑料钩 | () |
| FZ/T 93008-2002(2009) | 环锭细沙机用塑料经纱管 | () |
| FZ/T 93010-2002(2009) | 换梭式梭子用塑料纬纱管 | () |
| FZ/T 93029-1994 | 塑料粗纱管 | () |
| FZ/T 94017-1994 | 长丝络并捻用塑料双边筒管 | () |
| FZ/T 94030-1995 | 棉织机用塑料投梭结 | () |
| FZ/T 94031-1995 | 毛织机用塑料投梭结 | () |
| FZ/T 94032-1995 | 麻织机用塑料投梭结 | () |
| FZ/T 94033-1995 | 多梭箱丝织机用塑料投梭结 | () |
| FZ/T 96014-1993 | 帘子线捻线用塑料双边筒管 | () |
| GB 10457-2009 | 食品用塑料自粘保鲜膜 | Plastic cling wrap film for keeping fresh of food |
| GB 13454-1992 | 氨基模塑料 | Plastics--Aminoplastic moulding materials--Specification |
| GB 1404.3-2008 | 塑料 粉状酚醛模塑料 第3部分：选定模塑料的要求 | Plastics - Phenolic powder moulding compounds - Part 3: Requirements for selectes moulding compounds |
| GB 14232.1-2004 | 人体血液及血液成分袋式塑料容器第1部分:传统型血袋 | Plastics collapsible containers for human blood and blood components--Part1:Conventional containers |
| GB 15593-1995 | 输血(液)器具用软聚氯乙烯塑料 | Plasticized polyvinyl chloride (PVC) compounds for transfusion (infusion) equipment |
| GB 16487.12-2005 | 进口可用作原料的固体废物环境保护控制标准废塑料 | Environmental protection control standard for imported solid wastes as raw materials -- Waste and scrap of plastics |
| GB 18006.1-2009 | 塑料一次性餐饮具通用技术要求 | General requirement of plastic disposable tableware |
| GB 18072-2000 | 塑料厂卫生防护距离标准 | Health protection zone standard for plastics plant |
| GB 18191-2008 | 包装容器 危险品包装用塑料桶 | Packing containers - Plastic drum for packages of dangerous goods |
| GB 19160-2008 | 包装容器 危险品包装用塑料罐 | Packing containers - Plastic jerrican for packages of dangerous goods |
| GB 19434.8-2004 | 危险货物刚性塑料中型散装容器检验安全规范性能检验 | Safety code for theinspection of rigid plastics IBCs for dangerous goods--Performance tests |
| GB 19741-2005 | 液体食品包装用塑料复合膜、袋 | The plastics laminated films and bags using for packaging of liquid food |
| GB 20265-2006 | 耐化学品的工业用模压塑料靴 | Moulded plastics industrial boots with chemical resistance |
| GB 21660-2008 | 塑料购物袋的环保、安全和标识通用技术要求 | The general requirement for environmental protection, safety, identification and marking of plastic shopping bags |
| GB 22530-2008 | 橡胶塑料注射成型机安全要求 | Safety requirements of injection moulding machines for rubber and plastics |
| GB/T 10004-2008 | 包装用塑料复合膜、袋 干法复合、挤出复合 | Plastic laminated films & pouches for packaging dry lamination & extrusion lamination |
| GB/T 10006-1988 | 塑料薄膜和薄片摩擦系数测定方法 | Plastics--Film and sheeting--Determination of the coefficients of friction |
| GB/T 10007-2008 | 硬质泡沫塑料 剪切强度试验方法 | Rigid cellular plastics - Determination of shear strength |
| GB/T 10009-1988 | 丙烯腈-丁二烯-苯乙烯(ABS)塑料挤出板材 | Acrylenitrile-butadiene-styrene (ABS) plastics extrusion plates |
| GB/T 1033.1-2008 | 塑料 非泡沫塑料密度的测定 第1部分：浸渍法、液体比重瓶法和滴定法 | Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method |
| GB/T 1034-2008 | 塑料 吸水性的测定 | Plastics - Determination of water absorption |
| GB/T 1036-2008 | 塑料 -30℃～30℃线膨胀系数的测定 石英膨胀计法 | Test method for coefficient of linear thermal expansion of plastics between -30℃ and 30℃ with a vitreous silica dilatometer |
| GB/T 1037-1988 | 塑料薄膜和片材透水蒸气性试验方法杯式法 | Test method for water vapor transmission of plastic film and sheet--Cup method |
| GB/T 1038-2000 | 塑料薄膜和薄片气体透过性试验方法压差法 | Plastics--Film and sheeting--Determination of gas transmission--Differential-pressure method |
| GB/T 1040.1-2006 | 塑料拉伸性能的测定第1部分：总则 | Plastics - Determination of tensile properties - Part 1: General principles |
| GB/T 1040.2-2006 | 塑料拉伸性能的测定第2部分：模塑和挤塑塑料的试验条件 | Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics |
| GB/T 1040.3-2006 | 塑料拉伸性能的测定第3部分：薄膜和薄片的试验条件 | Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets |
| GB/T 1040.4-2006 | 塑料拉伸性能的测定第4部分：各向同性和正交各向异性纤维增强复合材料的试验条件 | Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites |
| GB/T 1040.5-2008 | 塑料 拉伸性能的测定 第5部分：单向纤维增强复合材料的试验条件 | Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites |
| GB/T 1041-2008 | 塑料 压缩性能的测定 | Plastics - Detemination of compressive properties |
| GB/T 1043.1-2008 | 塑料 简支梁冲击性能的测定 第1部分：非仪器化冲击试验 | Plastics - Determination of charpy impact properties - Part 1: Non - instrumented impact test |
| GB/T 10798-2001 | 热塑性塑料管材通用壁厚表 | Thermoplastics pipes--Universal wall thickness table |
| GB/T 10799-2008 | 硬质泡沫塑料 开孔和闭孔体积百分率的测定 | Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells |
| GB/T 10801.1-2002 | 绝热用模塑聚苯乙烯泡沫塑料 | Moulded polystyrene foam board for thermal insulation |
| GB/T 10801.2-2002 | 绝热用挤塑聚苯乙烯泡沫塑料(XPS) | Rigid extruded polystyrene foam board for thermal insulation (XPS) |
| GB/T 10802-2006 | 通用软质聚醚型聚氨酯泡沫塑料 | General flexible polyether polyurethane cellular plastics |
| GB/T 11016.1-2009 | 塑料绝缘和橡皮绝缘电话软线 第1部分：一般规定 | Plastic or rubber insulated telephone cords - Part 1: General |
| GB/T 11016.2-2009 | 塑料绝缘和橡皮绝缘电话软线 第2部分：聚氯乙烯绝缘电话软线 | Plastic or rubber insulated telephone cords - Part 2: Polyvinyl chloride insulated telephone cords |
| GB/T 11016.3-2009 | 塑料绝缘和橡皮绝缘电话软线 第3部分：聚丙烯绝缘电话软线 | Plastic or rubber insulated telephone cords - Part 3: Polypropylene insulated telephone cords |
| GB/T 11016.4-2009 | 塑料绝缘和橡皮绝缘电话软线 第4部分：橡皮绝缘电话软线 | Plastic or rubber insulated telephone cords - Part 4: Rubber insulated telephone cords |
| GB/T 11546.1-2008 | 塑料 蠕变性能的测定 第1部分：拉伸蠕变 | Plastic - Determination of creep behaviour - Part 1: Tensile creep |
| GB/T 11547-2008 | 塑料 耐液体化学试剂性能的测定 | Plastic - Methods of test for the determination of the effects of immersion in liquid chemicals |
| GB/T 11548-1989 | 硬质塑料板材耐冲击性能试验方法 (落锤法) | Standard test method for impact resistance of rigid plastic sheeting by means of a tup (falling weight) |
| GB/T 11793-2008 | 未增塑聚氯乙烯（PVC-U）塑料门窗力学性能及耐候性试验方法 | Test methods on mechanical and weathering properties for unplasticized polyvinyl chloride (PVC-U) doors and windows |
| GB/T 11997-2008 | 塑料 多用途试样 | Plastic - Multipurpose test specimens |
| GB/T 11998-1989 | 塑料玻璃化温度测定方法热机械分析法 | Determination of glass transitiontemperature of plastics--Thermomechanical analysis |
| GB/T 12000-2003 | 塑料暴露于湿热、水喷雾和盐雾中影响的测定 | Determination of the effects of exposure to damp heat，water spray and salt mist for plastics |
| GB/T 12001.1-2008 | 塑料 未增塑聚氯乙烯模塑和挤出材料 第1部分：命名系统和分类基础 | Plastics - Unplasticized poly (vinyl chloride) (PVC-U) moulding and extruded materials - Part 1: Designation system and basis for specifications |
| GB/T 12001.2-2008 | 塑料 未增塑聚氯乙烯模塑和挤出材料 第2部分：试样制备和性能测定 | Plastics - Unplasticized poly (vinyl chloride) (PVC-U) moulding and extruded materials - Part 2: Preparation of test specimens and determination of properties |
| GB/T 12002-1989 | 塑料门窗用密封条 | Sealing strips for plastic doors and windows |
| GB/T 12003-2008 | 未增塑聚氯乙烯（PVC-U）塑料窗 外形尺寸的测定 | Unplasticized polyvinyl chloride(PVC-U) windows - Determination of dimensions |
| GB/T 12006.1-2009 | 塑料 聚酰胺 第1部分：黏数测定 | Plastics - Polyamides - Part 1: Determination of viscosity number |
| GB/T 12006.2-2009 | 塑料 聚酰胺 第2部分：含水量测定 | Plastics - Polyamides - Part 2: Determination of water content |
| GB/T 12008.1-2009 | 塑料 聚醚多元醇 第1部分：命名系统 | Plastics - Polyether polyols - Part 1: Designation system |
| GB/T 12008.3-2009 | 塑料 聚醚多元醇 第3部分：羟值的测定 | Plastics - Polyether polyols - Part 3: Determination of hydroxyl number |
| GB/T 12008.4-2009 | 塑料 聚醚多元醇 第4部分：钠和钾的测定 | Plastics - Polyether polyols - Part 4: Determination of sodium and potassium |
| GB/T 12009.3-2009 | 塑料 多亚甲基多苯基异氰酸酯 第3部分：黏度的测定 | Plastics - Polymethylene polyphenyl isocyanate - Part 3: Determination of viscosity |
| GB/T 12010.1-2008 | 塑料 聚乙烯醇材料（PVAL） 第1部分：命名系统和分类基础 | Plastics - Poly(vinyl alcohol)(PVAL) materials - Part 1: Designation system and basis for specifications |
| GB/T 12027-2004 | 塑料薄膜和薄片加热尺寸变化率试验方法 | Plastics--Film and sheeting--Determination of dimensional change on heating |
| GB/T 12554-2006 | 塑料注射模技术条件 | Specifiication of injection moulds for plastics |
| GB/T 12555-2006 | 塑料注射模模架 | Injection mould bases for plastics |
| GB/T 12556-2006 | 塑料注射模模架技术条件 | Specification of injection mould bases for plastics |
| GB/T 12584-2008 | 橡胶或塑料涂覆织物 低温冲击试验 | Rubber or plastics coated fabrics - Low-temperature impact test |
| GB/T 12586-2003 | 橡胶或塑料涂覆织物耐屈挠破坏性的测定 | Rubber or plastics-coated fabrics--Determination of resistance to damage by flexing |
| GB/T 12587-2003 | 橡胶或塑料涂覆织物抗压裂性的测定 | Rubber or plastics-coated fabrics--Determination of crush resistance |
| GB/T 12588-2003 | 塑料涂覆织物聚氯乙烯涂覆层融合程度快速检验法 | Plastics coated fabrics--Polyvinyl chloride coatings--Rapid method for checking fusion |
| GB/T 12600-2005 | 金属覆盖层塑料上镍+铬电镀层 | Metallic coatings Electroplated coatings of nickel plus chromium on plastics materials |
| GB/T 12722-2008 | 橡胶和塑料软管组合件 液压脉冲曲挠试验（半Ω试验） | Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test（half-omega test） |
| GB/T 12783-2000 | 橡胶塑料机械产品型号编制方法 | Editorial nominating method for the modeldesignation of rubber and plastics machinery |
| GB/T 12784-1991 | 橡胶塑料加压式捏炼机 | Dispersion mixer for rubber and plastics |
| GB/T 12811-1991 | 硬质泡沫塑料平均泡孔尺寸试验方法 | Test method for average cell size of rigid cellular plastics |
| GB/T 12812-2006 | 硬质泡沫塑料 易碎性的测定 | Rigid cellular plastics - Determination of friability |
| GB/T 12833-2006 | 橡胶和塑料撕裂强度和粘合强度测定中的多峰曲线分析 | Rubber and plastics - Analysis of multipeak traces obtained in determinations of tear strength and adhesion strength |
| GB/T 12949-1991 | 滑动轴承覆有减摩塑料层的双金属轴套 | Plain bearings--Bimetallic busheswith plastic overlay |
| GB/T 13096-2008 | 拉挤玻璃纤维增强塑料杆力学性能试验方法 | Test method for mechanical properties of pultruded glass fiber reinforced plastic rods |
| GB/T 13376-2008 | 塑料闪烁体 | Plastic scintillators |
| GB/T 13455-1992 | 氨基模塑料挥发物测定方法 | Plastics--Aminoplastic moulding materials--Determination of volatile matter |
| GB/T 13525-1992 | 塑料拉伸冲击性能试验方法 | Test method for tensile-impact property of plastics |
| GB/T 13578-1992 | 橡胶塑料压延机 | Rubber and plactics calender |
| GB/T 13947-1992 | 电子元器件塑料封装设备通用技术条件 | General specification for electronic components plastic packaging equipments |
| GB/T 1404.1-2008 | 塑料 粉状酚醛模塑料 第1部分: 命名方法和基础规范 | Plastics - Phenolic powder moulding compounds - Part 1: Designation system and basis for specifications |
| GB/T 1404.2-2008 | 塑料 粉状酚醛模塑料 第2部分: 试样制备和性能测定 | Plastics - Phenolic powder moulding compounds - Part 2: Preparation of test specimens and determination of properties |
| GB/T 14112-1993 | 半导体集成电路塑料双列封装冲制型引线框架规范 | Semiconductor integrated circuits--Specification for stamped leadframes of plastic DIP |
| GB/T 14152-2001 | 热塑性塑料管材耐外冲击性能试验方法时针旋转法 | Thermoplastics pipes--Determination of resistance to external blows--Round-the-clock method |
| GB/T 14153-1993 | 硬质塑料落锤冲击试验方法通则 | General test method for impact resistance of rigid plastics by means of falling weight |
| GB/T 14154-1993 | 塑料门垂直荷载试验方法 | Plastics doors--Vertical load test |
| GB/T 14208.1-2009 | 纺织玻璃纤维增强塑料 无捻粗纱增强树脂棒机械性能的测定 第1部分：通则和棒的制备 | Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 1: General considerations and preparation of rods |
| GB/T 14208.2-2009 | 纺织玻璃纤维增强塑料 无捻粗纱增强树脂棒机械性能的测定 第2部分：弯曲强度的测定 | Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving- reinforced resin - Part 2: Determination of flexural strength |
| GB/T 14208.3-2009 | 纺织玻璃纤维增强塑料 无捻粗纱增强树脂棒机械性能的测定 第3部分：压缩强度的测定 | Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving- reinforced resin - Part 3: Determination of compressive strength |
| GB/T 14208.4-2009 | 纺织玻璃纤维增强塑料 无捻粗纱增强树脂棒机械性能的测定 第4部分：表观层间剪切强度的测定 | Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 4: Determination of apparent interlaminar shear strength |
| GB/T 14216-2008 | 塑料 膜和片润湿张力的测定 | Plastics - Film and sheeting - Determination of wetting tension |
| GB/T 14234-1993 | 塑料件表面粗糙度 | Surface roughness for plastic parts |
| GB/T 14447-1993 | 塑料薄膜静电性测试方法半衰期法 | Test method for electrostatic properties of plastic films--Half-life method |
| GB/T 1446-2005 | 纤维增强塑料性能试验方法总则 | Fiber-reinforced plastics composites-The generals for determination of properties |
| GB/T 1447-2005 | 纤维增强塑料拉伸性能试验方法 | Fiber-reinforced plastics composites---Determination of tensile properties |
| GB/T 1448-2005 | 纤维增强塑料压缩性能试验方法 | Fiber-reinforced plastics composites-Determination of compressive properties |
| GB/T 14484-2008 | 塑料 承载强度的测定 | Plastics - Determination of bearing strength |
| GB/T 14486-2008 | 塑料模塑件尺寸公差 | Dimensional tolerances for moulded plastic parts |
| GB/T 1449-2005 | 纤维增强塑料弯曲性能试验方法 | Fibre-reinforced plastic composites-Determination of flexural properties |
| GB/T 1450.1-2005 | 纤维增强塑料层间剪切强度试验方法 | Fibre-reinforced plastic composites-Determination of interlaminar shear strength |
| GB/T 1450.2-2005 | 纤维增强塑料冲压式剪切强度试验方法 | Fibre-reinforced plastic composites-Determination of the punch-type shear strength |
| GB/T 1451-2005 | 纤维增强塑料简支梁式冲击韧性试验方法 | Fiber-reinforced plastics composites---Determination of Charpy impact properties |
| GB/T 14519-1993 | 塑料在玻璃板过滤后的日光下间接曝露试验方法 | Plastics--Method of exposure to indirect weathering using glass-filtered daylight |
| GB/T 14520-1993 | 气相色谱分析法测定不饱和聚酯树脂增强塑料中的残留苯乙烯单体含量 | Determination of residual styrene monomer content in reinforced plastics based on unsaturated polyester resins by gas chromatography |
| GB/T 14522-2008 | 机械工业产品用塑料、涂料、橡胶材料人工气候老化试验方法 荧光紫外灯 | Artificial weathering test method for plastics,coating and rubber materials used for machinery industrial products - Fluorescent UV lamps |
| GB/T 1458-2008 | 纤维缠绕增强塑料环形试样力学性能试验方法 | Test method for mechanical properties of ring of filament-winding reinforced plastics |
| GB/T 1462-2005 | 纤维增强塑料吸水性试验方法 | Test methods for water absorption of fiber reinforced plastics |
| GB/T 1463-2005 | 纤维增强塑料密度和相对密度试验方法 | Test methods for density and relative density of fiber reinforced plastics |
| GB/T 14904-1994 | 钢丝增强的橡胶、塑料软管和软管组合件屈挠液压脉冲试验 | Rubber and plastics hose and hose assemblies--Wire reinforced--Hydraulic impulse test with flexing |
| GB/T 14905-2009 | 橡胶和塑料软管 各层间粘合强度的测定 | Rubber and plastics hoses - Determination of adhesion between components |
| GB/T 15047-1994 | 塑料扭转刚性试验方法 | Test method for stiffness proporties in torsion of plastics |
| GB/T 15048-1994 | 硬质泡沫塑料压缩蠕变试验方法 | Cellular plastics，rigid--Determination of compressive creep |
| GB/T 15065-2009 | 电线电缆用黑色聚乙烯塑料 | Black polyethylene compounds for wire and cable |
| GB/T 15223-2008 | 塑料 液体树脂 用比重瓶法测定密度 | Plastics - Liquid resins - Determination of density by the pyknometer method |
| GB/T 15234-1994 | 塑料平托盘 | Plastics flat pallets |
| GB/T 15560-1995 | 流体输送用塑料管材液压瞬时爆破和耐压试验方法 | Standard test method for short-time hydraulic failure and resistance to constant internal pressure of the plastics pipes for the transport of fluids |
| GB/T 15568-2008 | 通用型片状模塑料(SMC) | Sheet molding compound(SMC) for general purposes |
| GB/T 15596-2009 | 塑料在玻璃下日光、自然气候或实验室光源暴露后颜色和性能变化的测定 | Plastics - Determination of changes in colour and variations in properties after exposure to daylight under glass，natural weathering or laboratory light sources |
| GB/T 15597.1-2009 | 塑料 聚甲基丙烯酸甲酯（PMMA）模塑和挤塑材料 第1部分：命名系统和分类基础 | Plastics - Poly(methyl methacrylate)(PMMA)moulding and extrusion materials - Part 1: Designation system and basis for specifications |
| GB/T 15662-1995 | 导电、防静电塑料体积电阻率测试方法 | Method of testing volume resistivity of conducting and antistatic plastics |
| GB/T 15738-2008 | 导电和抗静电纤维增强塑料电阻率试验方法 | Test method for resistivity of conducting and antistatic fiber reinforced plastics |
| GB/T 15876-1995 | 塑料四面引线扁平封装引线框架规范 | Specification of leadframes for plastic quad flat package |
| GB/T 15907-2008 | 橡胶和塑料软管 可燃性试验方法 | Rubber and plastics hoses - Method of test for flammability |
| GB/T 15908-2009 | 塑料软管及软管组合件 液压用织物增强型 规范 | Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification |
| GB/T 15928-2008 | 不饱和聚酯树脂基增强塑料中残留苯乙烯单体含量的测定 | Reinforced plastics based on unsaturated polyester resins - Determination of residual styrene monomer content |
| GB/T 16167-2009 | 救生艇壳体玻璃纤维增强塑料层合板技术条件 | Technical conditions of lifeboat glass fiber reinforced plastics laminate |
| GB/T 16273.5-2002 | 设备用图形符号第5部分:塑料机械通用符号 | Graphical symbols for use on equipment--Part 5:Common symbols for plastic machine |
| GB/T 16276-1996 | 塑料薄膜粘连性试验方法 | Test method for blocking of plastic film |
| GB/T 16288-2008 | 塑料制品的标志 | Marking of plastics products |
| GB/T 1630.1-2008 | 塑料 环氧树脂 第1部分：命名 | Plastics - Epoxy resins - Part 1: Designation |
| GB/T 1632.1-2008 | 塑料 使用毛细管粘度计测定聚合物稀溶液粘度 第1部分：通则 | Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part1:General principles |
| GB/T 1632.5-2008 | 塑料 使用毛细管粘度计测定聚合物稀溶液粘度 第5部分：热塑性均聚和共聚型聚酯(TP) | Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5 : Thermoplastic polyester(TP) homopolymers and copolymers |
| GB/T 1633-2000 | 热塑性塑料维卡软化温度(VST)的测定 | Plastics--Thermoplastic materials--Determination of Vicat softening temperature(VST) |
| GB/T 1634.1-2004 | 塑料负荷变形温度的测定第1部分:通用试验方法 | Plastics--Determination of temperature of deflection under load--Part 1:General test method |
| GB/T 1634.2-2004 | 塑料负荷变形温度的测定第2部分:塑料、硬橡胶和长纤维增强复合材料 | Plastics--Determination of temperature of deflection under load--Part 2:Plastics，ebonite and long-fibre-reinforced composites |
| GB/T 1634.3-2004 | 塑料负荷变形温度的测定第3部分:高强度热固性层压材料 | Plastics--Determination of temperature of deflection under load--Part 3:High-strength thermosetting laminates |
| GB/T 1636-2008 | 塑料 能从规定漏斗流出的材料表观密度的测定 | Plastics - Determination of apparent density material that can be poured from a specified funnel |
| GB/T 16422.1-2006 | 塑料实验室光源暴露试验方法第1部分：总则 | Plastics - Methods of the exposure to laboratory light sources - Part 1: General guidance |
| GB/T 16422.2-1999 | 塑料实验室光源暴露试验方法第2部分:氙弧灯 | Plastics--Methods of exposure to laboratory light sources--Part 2:Xenon-arc sources |
| GB/T 16422.3-1997 | 塑料实验室光源曝露试验方法第3部分:荧光紫外灯 | Plastics--Methods of exposure to laboratory light sources--Part 3:Fluorescent UV lamps |
| GB/T 16422.4-1996 | 塑料实验室光源曝露试验方法第4部分:开放式碳弧灯 | Plastics--Methodsof exposure to laboratory light sources--Part 4:Open flame carbon arc lamp |
| GB/T 16525-1996 | 塑料有引线片式载体封装引线框架规范 | Specification of leadframes for plastic leaded chip carrier packages |
| GB/T 16578.1-2008 | 塑料 薄膜和薄片 耐撕裂性能的测定 第1部分: 裤形撕裂法 | Plastics - Film and sheeting - Determination of tear resistance - Part 1：Trouser tear method |
| GB/T 16578.2-2009 | 塑料 薄膜和薄片 耐撕裂性能的测定 第2部分：埃莱门多夫（Elmendor）法 | Plastics - Film and sheeting - Determination of tear resistance - Part 2: Elmendorf method |
| GB/T 16582-2008 | 塑料 用毛细管法和偏光显微镜法测定部分结晶聚合物熔融行为（熔融温度或熔融范围） | Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods |
| GB/T 16613-2008 | 塑料 试验用聚氯乙烯（PVC）糊的制备 分散器法 | Plastics - Preparation of PVC pastes for test purposes - Dissolver method |
| GB/T 16778-2009 | 纤维增强塑料结构件失效分析一般程序 | General procedure of failure analysis for fiber reinforced plastic structural products |
| GB/T 16779-2008 | 纤维增强塑料层合板拉-拉疲劳性能试验方法 | Test method for tension-tension fatigue of fiber reinforced plastic laminates |
| GB/T 17037.1-1997 | 热塑性塑料材料注塑试样的制备第1部分:一般原理及多用途试样和长条试样的制备 | Injection moulding of test specimens of thermoplastic materials--Part 1:General principles and moulding of multipurpose and bar test specimens |
| GB/T 17037.3-2003 | 塑料热塑性塑料材料注塑试样的制备第3部分: 小方试片 | Plastics--Injection moulding of test specimens of thermoplastic materials--Part 3: Small plates |
| GB/T 17037.4-2003 | 塑料热塑性塑料材料注塑试样的制备第4部分: 模塑收缩率的测定 | Plastic--Injection moulding of test specimens of thermoplastic materials--Part 4: Determination of moulding shrinkage |
| GB/T 17200-2008 | 橡胶塑料拉力、压力和弯曲试验机（恒速驱动） 技术规范 | Technical specification for tensile, compression and flexural testing machines for rubber and plastics (constant rate of rtaverse) |
| GB/T 1725-2007 | 色漆、清漆和塑料 不挥发物含量的测定 | Paints,varnishes and plastics - Determination of non-volatile-matter content |
| GB/T 17603-1998 | 光解性塑料户外暴露试验方法 | Method for outdoor exposure testing of photodegradable plastics |
| GB/T 17689-2008 | 土工合成材料 塑料土工格栅 | Geosynthetics - Plastic geogrids |
| GB/T 17690-1999 | 土工合成材料塑料扁丝编织土工布 | Geosynthetics--Plastic woven film yarn geotextile |
| GB/T 17858.2-1999 | 包装术语工业包装袋热塑性塑料软质薄膜袋 | Packaging--Sacks--Vocabulary and types--Sacks made from thermoplastic flexible film |
| GB/T 17876-1999 | 包装容器塑料防盗瓶盖 | Packaging volume--Plastic pilferproof closure |
| GB/T 18022-2000 | 声学1～10 MHz频率范围内橡胶和塑料纵波声速与衰减系数的测量方法 | Acoustics--Methods for measuring the longitudinal sound speed and attenuation coefficient of rubbers and plastics in the frequency range 1 MHz to 10 MHz |
| GB/T 18042-2000 | 热塑性塑料管材蠕变比率的试验方法 | Thermoplastics pipes--Determination of creep ratio |
| GB/T 18252-2008 | 塑料管道系统 用外推法确定热塑性塑料材料以管材形式的长期静液压强度 | Plastics piping and ducting systems - Determination of the long - term hydrostatic strength of thermoplastics materials in pipe form by extrapolation |
| GB/T 1842-2008 | 塑料 聚乙烯环境应力开裂试验方法 | Plastics - Test method for environmental stress-cracking of polyethylene |
| GB/T 18422-2001 | 橡胶和塑料软管及软管组合件透气性的测定 | Rubber and plastics hoses andhose assemblies--Determination of permeability to gas |
| GB/T 18423-2001 | 橡胶和塑料软管及非增强软管液体壁透性测定 | Rubber and plastics hoses and tubing--Determination of transmission of liquids through hose and tubing walls |
| GB/T 18424-2001 | 橡胶和塑料软管氙弧灯曝晒颜色和外观变化的测定 | Rubber and plastics hoses--Exposure to a xenon arc lamp--Determination of changes in colour andappearance |
| GB/T 18426-2001 | 橡胶或塑料涂覆织物低温弯曲试验 | Rubber or plastics-coated fabrics--Low-temperature bend test |
| GB/T 1843-2008 | 塑料 悬臂梁冲击强度的测定 | Plastics - Determination of izod impact strength |
| GB/T 1844.1-2008 | 塑料 符号和缩略语 第1部分: 基础聚合物及其特征性能 | Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics |
| GB/T 1844.2-2008 | 塑料 符号和缩略语 第2部分：填充及增强材料 | Plastic-Symbols and abbreviated-Part 2: Fillers and reinforcing materials |
| GB/T 1844.3-2008 | 塑料 符号和缩略语 第3部分：增塑剂 | Plastics - Symbols and abbrebiated terms - Part 3: Plasticizers |
| GB/T 1844.4-2008 | 塑料 符号和缩略语 第4部分: 阻燃剂 | Plastics - Symbols and abbreviated terms - Part 4: Flame retardants |
| GB/T 1845.2-2006 | 塑料聚乙烯 (PE) 模塑和挤出材料第2部分: 试样制备和性能测定 | Plastics―Polyethylene(PE) moulding and extrusion materials―Part 2: Preparation of test specimens and determination of properties |
| GB/T 18475-2001 | 热塑性塑料压力管材和管件用材料分级和命名总体使用(设计)系数 | Thermoplastics materials for pipes and fittings for pressure applications classification and designation--Overall service(design) coefficient |
| GB/T 18689-2009 | 农业灌溉设备 小型手动塑料阀 | Agricultural irrigation equipment－ Manually operated small plastics valves |
| GB/T 18743-2002 | 流体输送用热塑性塑料管材简支梁冲击试验方法 | Thermoplastics pipes for the transport of fluids--Determination of impact by the charpy method |
| GB/T 18744-2002 | 土工合成材料塑料三维土工网垫 | Geosynthetics--Plastic three dimensional erosion control mat |
| GB/T 18943-2008 | 多孔橡胶与塑料 动态缓冲性能测定 | Cellular rubbers and plastics - Determination of dynamic cushioning performance |
| GB/T 18949-2003 | 橡胶和塑料软管动态条件下耐臭氧性能的评定 | Rubber and plastics hoses--Assessment of ozone resistance under dynamic conditions |
| GB/T 18950-2003 | 橡胶和塑料软管静态下耐紫外线性能测定 | Rubber and plastics hoses--Determination of ultra-violet resistance under static conditions |
| GB/T 18964.1-2008 | 塑料 抗冲击聚苯乙烯(PS-I)模塑和挤出材料 第1部分：命名系统和分类基础 | Plastics － Impact-resistant Polystyrene (PS-I) moulding and extrusion materials －Part 1: Designation system and basis for specifications |
| GB/T 18964.2-2003 | 塑料抗冲击聚苯乙烯(PS-I)模塑和挤出材料第2部分: 试样制备和性能测定 | Plastics--Impact-resistant polystyrene(PS-I) moulding and extrusion materials--Part 2: Preparation of test specimens and determination of properties |
| GB/T 18991-2003 | 冷热水系统用热塑性塑料管材和管件 | Thermoplastics pipes and fittings forhot and cold water systems |
| GB/T 19089-2003 | 橡胶或塑料涂覆织物耐磨性的测定马丁代尔法 | Rubber-or plastics-coated fabrics--Determination of abrasion resistance--Martindale method |
| GB/T 19274-2003 | 土工合成材料塑料土工格室 | Geosynthetics--Plastic geocell |
| GB/T 19278-2003 | 热塑性塑料管材、管件及阀门通用术语及其定义 | General terms and their definitions of thermoplastic pipes，fittings and valves |
| GB/T 19280-2003 | 流体输送用热塑性塑料管材耐快速裂纹扩展(RCP)的测定小尺寸稳态试验(S4试验) | Thermoplastics pipes for the conveyance of fluids--Determination of resistance to rapid crack propagation (RCP)--Small-scale steady-state test(S4 test) |
| GB/T 19314.1-2003 | 小艇艇体结构和构件尺寸第1部分:材料:热固性树脂、玻璃纤维增强塑料、基准层合板 | Small craft--Hull construction and scantlings--Part 1: Materials: Thermosetting resins，glass-fibre reinforcement，reference laminate |
| GB/T 19466.1-2004 | 塑料差示扫描量热法(DSC)第1部分:通则 | Plastics--Differential scanning calorimetry(DSC)--Part 1:General principles |
| GB/T 19466.2-2004 | 塑料差示扫描量热法(DSC)第2部分:玻璃化转变温度的测定 | Plastics--Differential scanning calorimetry(DSC)--Part 2:Determination of glass transition temperature |
| GB/T 19466.3-2004 | 塑料差示扫描量热法(DSC)第3部分:熔融和结晶温度及热焓的测定 | Plastics--Differential scanning calorimetry(DSC)--Part 3:Determination of temperatureand enthalpy of melting and crystallization |
| GB/T 19466.6-2009 | 塑料 差示扫描量热法（DSC）第6部分：氧化诱导时间(等温OIT)和氧化诱导温度（动态OIT）的测定 | Plastics - Differential scanning calorimetry（DSC）- Part 6: Determination of oxidation induction time（isothermal OIT）and oxidation induction temperature（dynamic OIT） |
| GB/T 19467.1-2004 | 塑料可比单点数据的获得和表示第1部分:模塑材料 | Plastics--Acquisition and presentation of comparable single-point data--Part 1:Moulding materials |
| GB/T 19467.2-2004 | 塑料可比单点数据的获得和表示第2部分:长纤维增强材料 | Plastics--Acquisition and presentation of comparable single-point data--Part 2:Long-fibre-reinforced plastics |
| GB/T 19470-2004 | 土工合成材料塑料土工网 | Geosythetics--Plastic geonet |
| GB/T 19471.1-2004 | 塑料管道系统硬聚氯乙烯(PVC-U)管材弹性密封圈式承口接头偏角密封试验方法 | Plastics piping systems--Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride)(PVC-U)pipes--Test method forleaktighness under internal pressure and angular deflection |
| GB/T 19471.2-2004 | 塑料管道系统硬聚氯乙烯(PVC-U)管材弹性密封圈式承口接头负压密封试验方法 | Plastics piping systems--Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride)(PVC-U)for use with PVC-U pipes--Test method for leaktightness under negative pressure |
| GB/T 19532-2004 | 包装材料气相防锈塑料薄膜 | Packaging material--Volatile corrosion inhibiting film |
| GB/T 19603-2004 | 塑料无滴薄膜无滴性能试验方法 | Test method for drop-proof properties ofdrop-proof plastic films |
| GB/T 19647-2005 | 农田排水用塑料单壁波纹管 | Single wall corrugated plastics pipes for agricultural drainage |
| GB/T 19687-2005 | 闭孔塑料长期热阻变化的测定实验室加速测试方法 | Determination of the long-term change in thermal resistance of closed-cell plastics(accelerated laboratory test methods) |
| GB/T 19701.2-2005 | 外科植入物超高分子量聚乙烯第2部分:模塑料 | Implants for surgery Ultra-high molecular weight polyethylene-part 2:Moulded forms |
| GB/T 19712-2005 | 塑料管材和管件聚乙烯(PE)鞍形旁通抗冲击试验方法 | Plastics pipes and fittingsPolyethylene(PE) tapping tees Test method for impact resistance |
| GB/T 19789-2005 | 包装材料塑料薄膜和薄片氧气透过性试验库仑计检测法 | Packaging Material Standard Test Method for Oxygen Gas Permeability Characteristics of Plastic Film and Sheeting Using a Coulometric Sensor |
| GB/T 19796-2005 | 农业灌溉设备聚乙烯承压管用塑料鞍座 | Agricultural irrigation equipment-Plastics saddles for polyethylene pressure pipes |
| GB/T 19806-2005 | 塑料管材和管件聚乙烯电熔组件的挤压剥离试验 | Plastics pipes and fittings Crushing decohesion test for polyethylene(PE)electrofusion assemblies |
| GB/T 19807-2005 | 塑料管材和管件聚乙烯管材和电熔管件组合试件的制备 | Plastics pipes and fittings Preparation of test piece assemblies between a polyethylene(PE)pipe and an electrofusion fitting |
| GB/T 19808-2005 | 塑料管材和管件公称外径大于或等于90mm的聚乙烯电熔组件的拉伸剥离试验 | Plastics pipes and fittings Peel decohesion test for polyethylene(PE)electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm |
| GB/T 19809-2005 | 塑料管材和管件聚乙烯(PE)管材/管材或管材/管件热熔对接组件的制备 | Plastics pipes and fittings-Preparation of polyethylene(PE)pipe/pipe or pipe/fitting test piece assemblies by butt fusion |
| GB/T 19811-2005 | 在定义堆肥化中试条件下塑料材料崩解程度的测定 | Plastics-Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test |
| GB/T 19812.1-2005 | 塑料节水灌溉器材单翼迷宫式滴灌带 | Plastic equipment for water saving irrigation-drip tape with labyrinth on one side |
| GB/T 19812.2-2005 | 塑料节水灌溉器材压力补偿式滴头及滴灌管 | Plastic equipment for water saving irrigation-Pressure compensating emitter and emitting pipe |
| GB/T 19812.3-2008 | 塑料节水灌溉器材 内镶式滴灌管、带 | Plastic equipment for water saving irrigation - Drip pipe and tape inlaid with emitters inside |
| GB/T 19993-2005 | 冷热水用热塑性塑料管道系统 管材管件组合系统热循环试验方法 | Thermoplastics piping systems for hot and cold water supply-Test method for the resiance of pipes and fittings mounted assemblies to thermal cycling |
| GB/T 20022-2005 | 塑料氯乙烯均聚和共聚树脂表观密度的测定 | Plastics -- Homopolymer and Copolymer resins of vinyl chloride Determination of apparent density |
| GB/T 20023-2005 | 无气喷涂用橡胶和/或塑料软管及软管组合件 | Rubber and/or plastics hoses and hoses assemblies for airless paint spraying |
| GB/T 20024-2005 | 内燃机用橡胶和塑料燃油软管可燃性试验方法 | Rubber and Plastics hoses for fuels for internal-combustion engines -- Method of test for flammability |
| GB/T 20025.2-2005 | 汽车空调用橡胶和塑料软管及软管组合件耐制冷剂134a | Rubber and plastics hoses and hose assemblise for automotive air conditioning -- Refrigerant 134a |
| GB/T 20026-2005 | 橡胶和塑料软管内衬层耐磨性测定 | Rubber and plastics hose -- Determination of abrasion of lining |
| GB/T 20027-2005 | 橡胶或塑料涂覆织物破裂强度的测定 | Rubber-or plastics-coated fabrics -- Determiation of bursting strength |
| GB/T 20197-2006 | 降解塑料的定义、分类、标识和降解性能要求 | Define, classify, marking and degradability requirement of degradable plastic |
| GB/T 20219-2006 | 喷涂硬质聚氨酯泡沫塑料 | Cellular plastics, rigid - Spray-applied polyurethane foam for thermal insulation of buildings - Specification |
| GB/T 20220-2006 | 塑料薄膜和薄片样品平均厚度，卷平均厚度及单位质量面积的测定称量法（称量厚度） | Plastics - Film and sheeting - Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness) |
| GB/T 2035-2008 | 塑料术语及其定义 | Terms and definitions for plastics |
| GB/T 20417.1-2008 | 塑料 丙烯腈-丁二烯-苯乙烯(ABS)模塑和挤出材料 第1部分：命名系统和分类基础 | Plastics － Acrylonitrile-butadiene-Styrene(ABS) moulding and extrusion materials － Part 1: Designation system and basis for specifications |
| GB/T 20417.2-2006 | 塑料丙烯腈-丁二烯-苯乙烯 (ABS) 模塑和挤出材料第2部分:试样制备和性能测定 | Plastics―Acrylonitrile-butadiene-styrene(ABS)moulding and extrusion materials―Part 2: Preparation of test specimens and determination of properties |
| GB/T 20463.1-2006 | 防水用橡胶或塑料涂覆织物 第1部分：聚氯乙烯涂覆织物 | Rubber or plastics-coated fabrics for water resistant clothing―Part 1: PVC-coated fabrics |
| GB/T 20463.2-2006 | 防水用橡胶或塑料涂覆织物 第2部分：防水透湿聚氨酯涂覆织物 | Rubber or plastics-coated fabrics for water-resistant clothing―Part 2: Waterproof and moisture penetrable polyurethane-coated fabric |
| GB/T 20672-2006 | 硬质泡沫塑料 在规定负荷和温度条件下压缩蠕变的测定 | Cellular plastics, rigid - Determination of compressive creep under specified load and temperature conditions |
| GB/T 20673-2006 | 硬质泡沫塑料 低于环境温度的线膨胀系数的测定 | Cellular plastics - Determination of the coefficient of linear thermal expansion of rigid materials at sub-ambient temperatures |
| GB/T 20674.1-2006 | 塑料管材和管件 聚乙烯系统熔接设备 第1部分：热熔对接 | Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 1：Butt fusion |
| GB/T 20674.2-2006 | 塑料管材和管件 聚乙烯系统熔接设备 第2部分：电熔连接 | Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 2: Electrofusion |
| GB/T 20875.1-2007 | 电气绝缘材料水解稳定性的试验方法 第1部分：塑料薄膜 | Method of test the hydrolytic stability of electrical insulating materials - Part 1: Plastic films |
| GB/T 21059-2007 | 塑料 液态或乳液态或分散体系聚合物/树脂 用旋转黏度计在规定剪切速率下黏度的测定 | Plastics - polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate |
| GB/T 21060-2007 | 塑料 流动性的测定 | Plastics - Determination of pourability |
| GB/T 21189-2007 | 塑料简支梁、悬臂梁和拉伸冲击试验用摆锤冲击试验机的检验 | Verification of pendulum impact-testing machines used for Charpy, lzod and tensile impact-testing of plastics |
| GB/T 21238-2007 | 玻璃纤维增强塑料夹砂管 | Glass fiber reinforced plastics mortar pipes |
| GB/T 21239-2007 | 纤维增强塑料层合板冲击后压缩性能试验方法 | Test method for compression after impact properties of fiber reinforced plastic laminates |
| GB/T 21300-2007 | 塑料管材和管件 不透光性的测定 | Plastics pipes and fittings - Determination of opacity |
| GB/T 21332-2008 | 硬质泡沫塑料 水蒸气透过性能的测定 | Rigid cellular plastics - Determination of water vapour transmission properties |
| GB/T 21333-2008 | 硬质泡沫塑料 自结皮高密度材料试验方法 | Cellular plastics,rigid - Test methods for self-skinned,high-density materials |
| GB/T 21460.1-2008 | 塑料 苯乙烯-丙烯腈(SAN)模塑和挤出材料 第1部分：命名系统和分类基础 | Plastics － Styrene-acrylonitrile (SAN) moulding and extrusion materials － Part 1: Designation system and basis for specifications |
| GB/T 21460.2-2008 | 塑料 苯乙烯-丙烯腈(SAN)模塑和挤出材料 第2部分: 试样制备和性能测定 | Plastics - Styrene/acrylonitrile(SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties |
| GB/T 21461.1-2008 | 塑料 超高分子量聚乙烯（PE-UHMW）模塑和挤出材料 第1部分：命名系统和分类基础 | Plastics - Ultra-high-molecular-weight polyethylene(PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications |
| GB/T 21461.2-2008 | 塑料 超高分子量聚乙烯(PE-UHMW)模塑和挤出材料 第2部分: 试样制备和性能测定 | Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties |
| GB/T 21492-2008 | 玻璃纤维增强塑料顶管 | Glass fiber reinforced plastics jacking pipe |
| GB/T 21526-2008 | 结构胶粘剂 粘接前金属和塑料表面处理导则 | Structural adhesives - Guidelines for the surface preparation of metals and plastics prior to adhesive bonding |
| GB/T 21529-2008 | 塑料薄膜和薄片水蒸气透过率的测定 电解传感器法 | Determination of water vapour transmission rate for plastic film and sheeting - Electrolytic detection sensor method |
| GB/T 21558-2008 | 建筑绝热用硬质聚氨酯泡沫塑料 | Rigid polyurethane cellular plastics used in the thermal insulation of building |
| GB/T 21661-2008 | 塑料购物袋 | Plastic shopping bags |
| GB/T 21662-2008 | 塑料购物袋的快速检测方法与评价 | The puick testing method and evaluation for plastic shopping bags |
| GB/T 21783-2008 | 塑料 毛细管法和偏光显微镜法测定部分结晶聚合物的熔融行为(烯融温度或熔融范围) | Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods |
| GB/T 21843-2008 | 塑料 氯乙烯均聚和共聚树脂 用机械筛测定粒径 | Plastics - Vinyl chloride homopolymer and copolymer resins - Particle size determination by mechanical sieving |
| GB/T 21928-2008 | 食品塑料包装材料中邻苯二甲酸酯的测定 | Determination of phthalate esters in food plastic packaging materials |
| GB/T 21988-2008 | 塑料 氯乙烯均聚和共聚树脂 水中筛分析 | Plastics-Vinyl chloride homopolymer and copolymer resins-Sieve analysis in water |
| GB/T 21989-2008 | 塑料 聚氯乙烯糊 用Severs流变仪测定表观黏度 | Plastics - Poly(vinyl chloride)pastes - Determination of apparent viscosity using the severs rheometer |
| GB/T 21991-2008 | 塑料 试验用聚氯乙烯（PVC）糊的制备 行星混合器法 | Plastics - Preparation of PVC paste for test purpose - Planetary-mixer method |
| GB/T 22040-2008 | 公路沿线设施塑料制品耐候性要求及测试方法 | Technical requirements and determination of weathering quality for plastics of highway furnatures |
| GB/T 22047-2008 | 土壤中塑料材料最终需氧生物分解能力的测定 采用测定密闭呼吸计中需氧量或测定释放的二氧化碳的方法 | Plastics - Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved |
| GB/T 22048-2008 | 玩具及儿童用品 聚氯乙烯塑料中邻苯二甲酸酯增塑剂的测定 | Toys and children’s products - Determination of phthalate plasticizers in polyvinyl chloride plastic |
| GB/T 22236-2008 | 塑料的检验 检验用塑料制品的粉碎 | Testing of plastics Size reduction of plastic products for test purposes |
| GB/T 22271.1-2008 | 塑料 聚甲醛（POM）模塑和挤塑材料 第1部分：命名系统和分类基础 | Plastics - Polyoxymethylene(POM) moulding and extrusion materials - Part 1: Designation system and basis for specifications |
| GB/T 22271.2-2008 | 塑料 聚甲醛（POM）模塑和挤塑材料 第2部分：试样制备和性能测定 | Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties |
| GB/T 22312-2008 | 塑料 聚丙烯酰胺 残留丙烯酰胺含量测定方法 | Plastics - Polyacrylamide - Determination for residual acrylamide |
| GB/T 22313-2008 | 塑料 用于聚氨酯生产的多元醇 水含量的测定 | Plastics - Polyols for use in the production of polyurethan - Determination of water content |
| GB/T 22314-2008 | 塑料 环氧树脂 黏度测定方法 | Plastics - Epoxide resins - Determination of viscosity |
| GB/T 22410-2008 | 包装 危险货物运输包装 塑料相容性试验 | Packaging - Transport packaging for dangerous goods - Plastics compatibility testing |
| GB/T 22411-2008 | 危险货物塑料编织包装抗老化试验方法 | Test method of antiaging for plastic woven packaging of dangerous goods |
| GB/T 22470-2008 | 电气用环保型模塑料通用要求 | General requirements for environmentally friendly moulding compounds for electrical purpose |
| GB/T 22472-2008 | 仪表和设备部件用塑料的燃烧性测定 | Tests for flammability of plastic materials for parts in devices and appliances |
| GB/T 22776-2008 | 计时仪器用公差与配合 塑料件公差 | () |
| GB/T 22936-2008 | 花卉用酚醛泡沫塑料 | Phenolic floral foam |
| GB/T 23241-2009 | 灌溉用塑料管材和管件基本参数及技术条件 | Plastics pipes and fittings used for irrigation basic parameters and technical requirements |
| GB/T 23296.1-2009 | 食品接触材料 塑料中受限物质 塑料中物质向食品及食品模拟物特定迁移试验和含量测定方法以及食品模拟物暴露 | Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Guide to test methods for the specific migration of substances from plastics to foods and food simulants and the determination of substances in plastics and the selection of conditions of exposure to food simulants |
| GB/T 23296.11-2009 | 食品接触材料 塑料中环氧乙烷和环氧丙烷含量的测定 气相色谱法 | Food contact materials - Determination of ethylene oxide and propylene oxide in plastics - Gas chromatography |
| GB/T 23296.13-2009 | 食品接触材料 塑料中氯乙烯单体的测定 气相色谱法 | Food contact materials - Determination of vinyl chloride monomer in plastics - Gas chromatography |
| GB/T 23296.22-2009 | 食品接触材料 塑料中异氰酸酯含量的测定 高效液相色谱法 | Food contact materials - Determination of isocyanates in plastics - High performance liquid chromatography |
| GB/T 23296.3-2009 | 食品接触材料 塑料中1,3-丁二烯含量的测定 气相色谱法 | Food contact materials - Determination of 1,3-butadiene in plastics - Gas chromatography |
| GB/T 23296.7-2009 | 食品接触材料 塑料中表氯醇含量的测定 高效液相色谱法 | Food contact materials - Determination of epichlorohydrin in plastics - High performance liquid chromatography |
| GB/T 23641-2009 | 电气用纤维增强不饱和聚酯模塑料(SMC/BMC) | Fiber reinforced unsaturated polyester moulding-compounds（SMC and BMC）for electrical purposes |
| GB/T 23652-2009 | 塑料 氯乙烯均聚和共聚树脂 振实表观密度的测定 | Plastics - PVC resins - Determination of compacted apparent bulk density |
| GB/T 23653-2009 | 塑料 通用型聚氯乙烯树脂 热增塑剂吸收量的测定 | Plastics - PVC resins for general use - Determination of hot plasticizer absorption |
| GB/T 23711.1-2009 | 氟塑料衬里压力容器 电火花试验方法 | Spark test method for pressure vessels lined with fluoroplastics |
| GB/T 23711.2-2009 | 氟塑料衬里压力容器 耐低温试验方法 | Low temperature test method for pressure vessels lined with fluoroplastics |
| GB/T 23711.3-2009 | 氟塑料衬里压力容器 耐高温试验方法 | High temperature test method for pressure vessels lined with fluoroplastics |
| GB/T 23711.4-2009 | 氟塑料衬里压力容器 耐真空试验方法 | Vacuum test method for pressure vessels lined with fluoroplastics |
| GB/T 23711.5-2009 | 氟塑料衬里压力容器 热胀冷缩试验方法 | Expansion and contraction test method for pressure vessels lined with fluoroplastics |
| GB/T 23711.6-2009 | 氟塑料衬里压力容器 压力试验方法 | Hydrostatic pressure test method for pressure vessels lined with fluoroplastics |
| GB/T 23913.5-2009 | 复合岩棉板耐火舱室 第5部分：塑料装饰件 | Fire-resisting compartment of composite rock wool panel - Part 5: Plastic decoration parts |
| GB/T 2406.1-2008 | 塑料 用氧指数法测定燃烧行为 第1部分：导则 | Plastics - Determination of burning behaviour by oxygen index - Part 1: Guidance |
| GB/T 2406.2-2009 | 塑料 用氧指数法测定燃烧行为 第2部分：室温试验 | Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test |
| GB/T 2407-2008 | 塑料 硬质塑料小试样与炽热棒接触时燃烧特性的测定 | Plastics - Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod |
| GB/T 2408-2008 | 塑料 燃烧性能的测定 水平法和垂直法 | Plastics - Determination of burning characteristics - Horizontal and vertical test |
| GB/T 2410-2008 | 透明塑料透光率和雾度的测定 | Determination of the luminous transmittance and haze of transparent plastics |
| GB/T 2411-2008 | 塑料和硬橡胶 使用硬度计测定压痕硬度（邵氏硬度） | Plastics and ebonite - Determination of indentation hardness by means of a duronmeter(shore hardness) |
| GB/T 24113.1-2009 | 机械电气设备 塑料机械计算机控制系统 第1部分：通用技术条件 | Electrical equipment of machines - Computer control systems for plastics machinery - Part 1: General requirements |
| GB/T 2412-2008 | 塑料 聚丙烯(PP)和丙烯共聚物热塑性塑料等规指数的测定 | Plastics - Polypropylene(PP) and propylene copolymer thermoplastics - Determination of isotactic index |
| GB/T 24126-2009 | 橡胶和塑料软管及软管组合件 采购者、组装者、安装者和操作者使用指南 | Rubber and plastics hoses and hose assemblies - Guide for use by purchasers, assemblers, installers and operating personnel |
| GB/T 24127-2009 | 塑料抗藻性能试验方法 | Testing method for determining algal resistance of plastics |
| GB/T 24128-2009 | 塑料防霉性能试验方法 | Method for testing resistance of plastics to mold |
| GB/T 24132.1-2009 | 室内装饰用塑料涂覆织物 第1部分：PVC涂覆针织物规范 | Plastics-coated fabrics for upholstery - Part 1: Specification for PVC-coated knitted fabrics |
| GB/T 24132.2-2009 | 室内装饰用塑料涂覆织物 第2部分：聚氯乙烯涂覆编织织物规范 | Plastics-coated fabrics for upholstery - Part 2: Specification for PVC-coated woven fabrics |
| GB/T 24132.3-2009 | 室内装饰用塑料涂覆织物 第3部分：聚氨酯涂覆编织织物规范 | Plastics-coated fabrics for upholstery - Part 3: Specification for polyurethane-coated woven fabrics |
| GB/T 24133-2009 | 橡胶或塑料涂覆织物 调节和试验的标准环境 | Rubber-or plastics-coated fabrics - Standard atmospheres for conditioning and testing |
| GB/T 24134-2009 | 橡胶和塑料软管 静态条件下耐臭氧性能的评价 | Rubber and plastics hoses - Assessment of ozone resistance under static conditions |
| GB/T 24135-2009 | 橡胶或塑料涂覆织物 加速老化试验 | Rubber or plastics coated fabrics - Accelerated ageing tests |
| GB/T 24136-2009 | 橡胶或塑料涂覆织物 耐液体性能的测定 | Rubber-or plastics-coated fabrics - Detetmination of resistance to liquids |
| GB/T 24144-2009 | 消防软管 橡胶和塑料吸引软管和软管组合件 | Fire-fighting hoses - Rubber and plastics suction hoses and hose assemblies |
| GB/T 24148.1-2009 | 塑料 不饱和聚酯树脂（UP-R） 第1部分：命名系统 | Plastics - Unsaturated-polyester resins (UP-R) - Part 1: Designation system |
| GB/T 24148.2-2009 | 塑料 不饱和聚酯树脂（UP-R） 第2部分：试样制备和性能测定 | Plastics - Unsaturated-polyester resins (UP-R) - Part 2: Preparation of test specimens and determination of properties |
| GB/T 24148.4-2009 | 塑料 不饱和聚酯树脂(UP-R) 第4部分：粘度的测定 | Plastics - Unsaturated polyester resin - Part 4: Determination of viscosity |
| GB/T 24148.6-2009 | 塑料 不饱和聚酯树脂 (UP-R) 第6部分：130℃反应活性测定 | Plastics - Unsaturated-polyester resins - Part 6: Determination of reactivity at 130℃ |
| GB/T 24149.1-2009 | 塑料 汽车用聚丙烯（PP）专用料 第1部分：保险杠 | Plastics - Polypropylene(PP) compound for automobile - Part 1: Bumper |
| GB/T 24150-2009 | 塑料 阻燃抗冲击聚苯乙烯专用料 | Plastics - Flame retardant impact-resistant polystyrene compound |
| GB/T 24151-2009 | 塑料 玻璃纤维增强阻燃聚对苯二甲酸丁二醇酯专用料 | Plastics - Glass fiber reinforced and flame retardant poly(butylenes terephthalate) compound |
| GB/T 24282-2009 | 塑料 聚丙烯中二甲苯可溶物含量的测定 | Plastics - Determination of xylene-soluble matter in polypropylene |
| GB/T 24451-2009 | 慢回弹软质聚氨酯泡沫塑料 | Low resilience flexible polyether polyurethane cellular plastics |
| GB/T 24453-2009 | 酒店客房用易耗塑料制品 | Plastic products used in guestroom of hotel |
| GB/T 24454-2009 | 塑料垃圾袋 | Plastic refuse sack |
| GB/T 24721.1-2009 | 公路用玻璃纤维增强塑料产品 第1部分：通则 | Glass fiber reinforced plastic product for highway - Part 1: General rule |
| GB/T 24721.2-2009 | 公路用玻璃纤维增强塑料产品 第2部分：管箱 | Glass fiber reinforced plastic product for highway - Part 2: Trunk |
| GB/T 24721.3-2009 | 公路用玻璃纤维增强塑料产品 第3部分：管道 | Glass fiber reinforced plastic product for highway - Part 3: Duct |
| GB/T 24721.4-2009 | 公路用玻璃纤维增强塑料产品 第4部分：非承压通信井盖 | Glass fiber reinforced plastic product for highway - Part 4: Non-pressure communications well lid |
| GB/T 24721.5-2009 | 公路用玻璃纤维增强塑料产品 第5部分：标志底板 | Glass fiber reinforced plastic product for highway - Part 5: Sign base panel |
| GB/T 2546.1-2006 | 塑料聚丙烯（PP〕模塑和挤出材料第1部分：命名系统和分类基础 | Plastics―Polypropylene(PP) moulding and extrusion materials―Part 1: Designation system and basis for specifications |
| GB/T 2546.2-2003 | 塑料聚丙烯(PP)模塑和挤出材料第2部分: 试样制备和性能测定 | Plastics--Polypropylene(PP) moulding and extrusion materials--Part 2: Preparation of test specimens and determination of properties |
| GB/T 2547-2008 | 塑料 取样方法 | Plastic resins - Sampling |
| GB/T 2572-2005 | 纤维增强塑料平均线膨胀系数试验方法 | Fiber-reiforced plastics composites-Determination for mean coefficient of linear expansion |
| GB/T 2573-2008 | 玻璃纤维增强塑料老化性能试验方法 | Test method for aging properties of glass fiber reinforced plastics |
| GB/T 2576-2005 | 纤维增强塑料树脂不可溶分含量试验方法 | Test method for insoluble matter content of resin rsed in fiber reinforced plastics |
| GB/T 2577-2005 | 玻璃纤维增强塑料树脂含量试验方法 | Test method for resin content of glass fiber reinforced plastics |
| GB/T 2895-2008 | 塑料 聚酯树脂 部分酸值和总酸值的测定 | Plastics polyester resin - Determination of partial acid value and total acid value |
| GB/T 2913-1982 | 塑料白度试验方法 | Test for whiteness of plastics |
| GB/T 2914-2008 | 塑料 氯乙烯均聚和共聚树脂 挥发物(包括水)的测定 | Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of volatile matter (including water) |
| GB/T 2916-2007 | 塑料 氯乙烯均聚和共聚树脂 用空气喷射筛装置的筛分析 | Plastic - Vinyl chloride homopolymer and copolymer resins - Sieve analysis using air-jet sieve apparatus |
| GB/T 2918-1998 | 塑料试样状态调节和试验的标准环境 | Plastics--Standard atmospheres for conditioning and testing |
| GB/T 3139-2005 | 纤维增强塑料导热系数试验方法 | Fiber-reinforced plastics composites-Determination of thermal conductivity |
| GB/T 3140-2005 | 纤维增强塑料平均比热容试验方法 | Fiber-reinforced plastics composites-Determination of mean specific heat capacity |
| GB/T 3354-1999 | 定向纤维增强塑料拉伸性能试验方法 | Test method for tensile properties oforiented fiber reinforced plastics |
| GB/T 3355-2005 | 纤维增强塑料纵横剪切试验方法 | Test method for longitudinal transverse shear(L-T shear)properties of fiber reinforced plastics |
| GB/T 3356-1999 | 单向纤维增强塑料弯曲性能试验方法 | Test method for flexural properties of unidirectional fiber reinforced plastics |
| GB/T 3365-2008 | 碳纤维增强塑料孔隙含量和纤维体积含量试验方法 | Carbon fiber reinforced plastics - Determination of void content and fiber volume content |
| GB/T 3398.1-2008 | 塑料 硬度测定 第1部分：球压痕法 | Plastics - Determination of hardness - Part 1: Ball indentation method |
| GB/T 3398.2-2008 | 塑料 硬度测定 第2部分：洛氏硬度 | Plastics - Determination of hardness - Part 2:Rockwell hardness |
| GB/T 3399-1982 | 塑料导热系数试验方法护热平板法 | Test method for thermal conductivity of plastics by means of the guarded hot plate |
| GB/T 3400-2002 | 塑料通用型氯乙烯均聚和共聚树脂室温下增塑剂吸收量的测定 | Plastics--Homopolymer and copolymer resins of vinyl chloeride for general use--Determination of plasticizer absorption at room temperature |
| GB/T 3402.1-2005 | 塑料氯乙烯均聚和共聚树脂第1部分：命名体系和规范基础 | Plastics Homopolymer and copolymer resins of vinyl chloride -- Part 1: Designation system and basis for specifiations |
| GB/T 3403.1-2008 | 塑料 粉状脲-甲醛和脲/三聚氰胺-甲醛模塑料（UF-和UF/MF-PMCs） 第1部分： 命名系统和分类基础 | Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds（UF-and UF/MF-PMCs）- Part 1: Designation system and basis for specifications |
| GB/T 3681-2000 | 塑料大气暴露试验方法 | Plastics--Test method of exposure to weathering |
| GB/T 3682-2000 | 热塑性塑料熔体质量流动速率和熔体体积流动速率的测定 | Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
| GB/T 3807-1994 | 聚氯乙烯微孔塑料拖鞋 | Polyvinyl chloride cellular plastic slippers |
| GB/T 3854-2005 | 增强塑料巴柯尔硬度试验方法 | Test method for hardness of reinforced plastics by means of a Barcol impresser |
| GB/T 3855-2005 | 碳纤维增强塑料树脂含量试验方法 | Test method for resin content of carbon fiber reinforced plastics |
| GB/T 3856-2005 | 单向纤维增强塑料平板压缩性能试验方法 | Test method for compression properties of unidirectional fiber reinforced plastics |
| GB/T 3857-2005 | 玻璃纤维增强热固性塑料耐化学介质性能试验方法 | Test method for chemical resistance of glass fiber reinforced thermosetting plastics |
| GB/T 3960-1983 | 塑料滑动摩擦磨损试验方法 | Test method for friction and wear of plasticsby sliding |
| GB/T 3961-2009 | 纤维增强塑料术语 | Terms for fibre reinforced plastics |
| GB/T 4169.1-2006 | 塑料注射模零件 第1部分：推杆 | Components of injection moulds for plastics - Part 1: Ejector pin |
| GB/T 4169.10-2006 | 塑料注射模零件 第10部分：支承柱 | Components of injection moulds for plastics - Part 10: Support pillar |
| GB/T 4169.11-2006 | 塑料注射模零件 第11部分：圆形定位元件 | Components of injection moulds for plastics - Part 11: Round locating element |
| GB/T 4169.12-2006 | 塑料注射模零件 第12部分：推板导套 | Components of injection moulds for plastics - Part 12: Ejector guide bush |
| GB/T 4169.13-2006 | 塑料注射模零件 第13部分：复位杆 | Components of injection moulds for plastics ― Part 13: Return pin |
| GB/T 4169.14-2006 | 塑料注射模零件 第14部分：推板导柱 | Components of injection moulds for plastics - Part 14: Ejector guide pillar |
| GB/T 4169.15-2006 | 塑料注射模零件 第15部分: 扁推杆 | Components of injection moulds for plastics - Part 15: Flat ejector pin |
| GB/T 4169.16-2006 | 塑料注射模零件 第16部分: 带肩推杆 | Components of injection moulds for plastics - Part 16: Shouldered ejector pin |
| GB/T 4169.17-2006 | 塑料注射模零件 第17部分: 推管 | Components of injection moulds for plastics - Part 17: Ejector sleeve |
| GB/T 4169.18-2006 | 塑料注射模零件 第18部分: 定位圈 | Components of injection moulds for plastics - Part 18: Locating ring |
| GB/T 4169.19-2006 | 塑料注射模零件 第19部分: 浇口套 | Components of injection moulds for plastics - Part 19: Sprue bush |
| GB/T 4169.2-2006 | 塑料注射模零件 第2部分：直导套 | Components of injection moulds for plastics - Part 2: Straight guide bush |
| GB/T 4169.20-2006 | 塑料注射模零件 第20部分: 拉杆导柱 | Components of injection moulds for plastics - Part 20: Limit pin |
| GB/T 4169.21-2006 | 塑料注射模零件 第21部分: 矩形定位元件 | Components of injection moulds for plastics - Part 21: Rectangular locating element |
| GB/T 4169.22-2006 | 塑料注射模零件 第22部分: 圆形拉模扣 | Components of injection moulds for plastics - Part 22: Round mould opening delayer |
| GB/T 4169.23-2006 | 塑料注射模零件 第23部分: 矩形拉模扣 | Components of injection moulds for plastics - Part 23: Rectangular mould opening delayer |
| GB/T 4169.3-2006 | 塑料注射模零件 第3部分：带头导套 | Components of injection moulds for plastics - Part 3: Headed guide bush |
| GB/T 4169.4-2006 | 塑料注射模零件 第4部分：带头导柱 | Components of injection moulds for plastics - Part 4: Headed guide pillar |
| GB/T 4169.5-2006 | 塑料注射模零件 第5部分：带肩导柱 | Components of injection moulds for plastics - Part 5: Shouldered guide pillar |
| GB/T 4169.6-2006 | 塑料注射模零件 第6部分：垫块 | Components of injection moulds for plastics - Part 6: Spacer block |
| GB/T 4169.7-2006 | 塑料注射模零件 第7部分：推板 | Components of injection moulds for plastics - Part 7: Ejector plate |
| GB/T 4169.8-2006 | 塑料注射模零件 第8部分：模板 | Components of injection moulds for plastics ― Part 8:Mould plate |
| GB/T 4169.9-2006 | 塑料注射模零件 第9部分：限位钉 | Components of injection moulds for plastics - Part 9: Stop pin |
| GB/T 4170-2006 | 塑料注射模零件技术条件 | Specification of components of injection moulds for plastics |
| GB/T 4217-2008 | 流体输送用热塑性塑料管材 公称外径和公称压力 | Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures |
| GB/T 4550-2005 | 试验用单向纤维增强塑料平板的制备 | Preparation of unidirection or ientated fiber reinforced plastic plates for test purposes |
| GB/T 4610-2008 | 塑料 热空气炉法点着温度的测定 | Plastics - Determination of ignition temperature using a hot-air furnace |
| GB/T 4612-2008 | 塑料 环氧化合物 环氧当量的测定 | Plastics - Epoxy compounds - Determination of epoxy equivalent |
| GB/T 4616-2008 | 塑料 酚醛模塑料 丙酮可溶物（未模塑态材料的表观树脂含量）测定 | Plastics - Phenolic moulding materials - Determination of acetone-soluble matter（apparent resin content of material in the unmoulded state） |
| GB/T 4617-2009 | 塑料 酚醛模塑制品 丙酮可溶物的测定 | Plastics - Phenolic mouldings - Determination of acetone-soluble matter |
| GB/T 4618.1-2008 | 塑料 环氧树脂氯含量的测定 第1部分：无机氯 | Plastics - Epoxy resins - Determination of chlorine content - Part 1: Inorganic chlorine |
| GB/T 4618.2-2008 | 塑料 环氧树脂氯含量的测定 第2部分：易皂化氯 | Plastics - Epoxy resins - Determination of chlorine content - Part 2: Easily saponifiabLe chlorine |
| GB/T 4944-2005 | 玻璃纤维增强塑料层合板层间拉伸强度试验方法 | Test method for interlaminar tensile strength of glass fiber reinforced plastic laminates |
| GB/T 5258-2008 | 纤维增强塑料面内压缩性能试验方法 | Fiber-reinforced plastic composites - Determination of compressive properties in the in-plane direction |
| GB/T 5349-2005 | 纤维增强热固性塑料管轴向拉伸性能试验方法 | Fiber-reinforced thermosetting plastic composites pipe-Determination of longitudinal tensile properties |
| GB/T 5350-2005 | 纤维增强热固性塑料管轴向压缩性能试验方法 | Fiber-reinforced thermosetting plastic composites pipe-Determination for longitudinal compressive properties |
| GB/T 5351-2005 | 纤维增强热固性塑料管短时水压失效压力试验方法 | Fiber-reinforced thermosetting plastic composites pipe-Determination of short-time hydraulic failure pressure |
| GB/T 5352-2005 | 纤维增强热固性塑料管平行板外载性能试验方法 | Fiber-reinforced thermosetting plastic composites pipe-Determination for external loading properties by parallel-plate loading |
| GB/T 5470-2008 | 塑料 冲击法脆化温度的测定 | Plastics - Determination of the brittleness temperature by impact |
| GB/T 5471-2008 | 塑料 热固性塑料试样的压塑 | Plastics - Compression moulding of test specimens of thermosetting materials |
| GB/T 5478-2008 | 塑料 滚动磨损试验方法 | Plastics - Test method for wear by rolling |
| GB/T 5563-2006 | 橡胶和塑料软管及软管组合件 静液压试验方法 | Rubber and plastics hoses and hose assemblies - Hydrostatic testing |
| GB/T 5564-2006 | 橡胶及塑料软管 低温曲挠试验 | Rubber and plastics hoses - Subambient temperature flexibility tests |
| GB/T 5565-2006 | 橡胶或塑料增强软管和非增强软管 弯曲试验 | Rubber or plastics hoses tubing - Bending tests |
| GB/T 5566-2003 | 橡胶或塑料软管耐压扁试验方法 | Rubber or plastics hoses--Test method for crush resistance |
| GB/T 5567-2006 | 橡胶和塑料软管及软管组合件 耐吸扁性能的测定 | Rubber and plastics hoses and hose assemblies - Determination of suction resistance |
| GB/T 5568-2006 | 橡胶或塑料软管及软管组合件 无挠曲液压脉冲试验 | Rubber or plastics hoses and hose assemblies - Hydraulic impulse test without flexing |
| GB/T 5737-1995 | 食品塑料周转箱 | Plastic container for food |
| GB/T 5738-1995 | 瓶装酒、饮料塑料周转箱 | Plastic crates for beverage bottled |
| GB/T 6011-2005 | 纤维增强塑料燃烧性能试验方法炽热棒法 | Test method for flammability characteristics of fiber-reinforced plastics-Incandescent rod method |
| GB/T 6111-2003 | 流体输送用热塑性塑料管材耐内压试验方法 | Thermoplastics pipes for the conveyance of fluids--Resistance to internal pressure--Test method |
| GB/T 6342-1996 | 泡沫塑料与橡胶线性尺寸的测定 | Cellular plastics and rubbers--Determination of linear dimensions |
| GB/T 6343-2009 | 泡沫塑料及橡胶 表观密度的测定 | Cellular plastics and rubbers - Determination of apparent density |
| GB/T 6594.2-2003 | 塑料聚苯乙烯(PS)模塑和挤出材料第2部分: 试样制备和性能测定 | Plastics--Polystyrene(PS) moulding and extrusion materials--Part 2: Preparation of testspecimens and determination of properties |
| GB/T 6671-2001 | 热塑性塑料管材纵向回缩率的测定 | Thermoplastics pipes--Determination of longitudinal reversion |
| GB/T 6672-2001 | 塑料薄膜和薄片厚度测定机械测量法 | Plastics film and sheeting--Determination of thickness by mechanical scanning |
| GB/T 6673-2001 | 塑料薄膜和薄片长度和宽度的测定 | Plastics film and sheeting--Determination of length and width |
| GB/T 6743-2008 | 塑料用聚酯树脂、色漆和清漆用漆基 部分酸值和总酸值的测定 | Plastics(polyester resins) and paints and varnishes(binders) - Determination of partial acid value and total acid value |
| GB/T 7129-2001 | 橡胶或塑料软管容积膨胀的测定 | Rubber or plastics hoses--Determinationof volumetric expansion |
| GB/T 7139-2002 | 塑料氯乙烯均聚物和共聚物氯含量的测定 | Plastics--Vinyl chloride homopolymers and copolymers--Determination of chlorine content |
| GB/T 7141-2008 | 塑料热老化试验方法 | Plastics - Methods of heat aging |
| GB/T 7142-2002 | 塑料长期热暴露后时间-温度极限的测定 | Determination of time-temperature limits for plastics after prolonged exposure to heat |
| GB/T 7190.1-2008 | 玻璃纤维增强塑料冷却塔 第1部分: 中小型玻璃纤维增强塑料冷却塔 | Glass fiber reinforced plastic cooling tower - Part 1: Middle and small glass fiber reinforced plastic cooling tower |
| GB/T 7190.2-2008 | 玻璃纤维增强塑料冷却塔 第2部分: 大型玻璃纤维增强塑料冷却塔 | Glass fiber reinforced plastic cooling tower - Part 2: Large glass fiber reinforced plastic cooling tower |
| GB/T 7528-2002 | 橡胶和塑料软管及软管组合件术语 | Rubber and plastics hoses and hose assemblies--Vocabulary |
| GB/T 7530-1998 | 橡胶或塑料涂覆织物术语 | Rubber or plastics-coated fabrics--Glossary of terms |
| GB/T 7559-2005 | 纤维增强塑料层合板螺栓连接挤压强度试验方法 | Test method for bearing strength by bolted joints of fiber reinforced plastics laminates |
| GB/T 7948-1987 | 塑料轴承极限PV试验方法 | Test method for PV limit of plastics bearings |
| GB/T 7984-2001 | 输送带具有橡胶或塑料覆盖层的普通用途织物芯输送带 | Conveyor belts--Specification for rubber or plastics covered conveyor belts of textile constructionfor general use |
| GB/T 8237-2005 | 纤维增强塑料用液体不饱和聚酯树脂 | Liquid unsaturated polyester resin for fiber reinforced plastics |
| GB/T 8323.1-2008 | 塑料 烟生成 第1部分：烟密度试验方法导则 | Plastic - Smoke generation - Part 1: Guidance on optical-density testing |
| GB/T 8323.2-2008 | 塑料 烟生成 第2部分：单室法测定烟密度试验方法 | Plastic - Smoke generation - Part 2: Determination of optical density by a single-chamber test |
| GB/T 8324-2008 | 塑料 模塑材料体积系数的测定 | Plastics - Determination of bulk factor of moulding materials |
| GB/T 8332-2008 | 泡沫塑料燃烧性能试验方法 水平燃烧法 | Test method for flammability of cellular plastic - Horizonal burning method |
| GB/T 8333-2008 | 硬质泡沫塑料燃烧性能试验方法 垂直燃烧法 | Test method for flammability of rigid cellular plastic - Virtical burning method |
| GB/T 840-1988 | 塑料滚花头螺钉 | Plastic diamond knurlhead screws |
| GB/T 8661-2008 | 塑料 苯乙烯-丙烯腈共聚物残留丙烯腈单体含量的测定 气相色谱法 | Plastics - Styrene/acrylonitrile copolymers - Determination of residual acrylonitrile monomer content - Gas chromatography method |
| GB/T 8802-2001 | 热塑性塑料管材、管件维卡软化温度的测定 | Thermoplastics pipes and fitting--Determination of vicat softening temperature |
| GB/T 8804.1-2003 | 热塑性塑料管材拉伸性能测定第1部分:试验方法总则 | Thermoplastic pipes--Determination of tensile properties--Part 1: General test method |
| GB/T 8804.2-2003 | 热塑性塑料管材拉伸性能测定第2部分: 硬聚氯乙烯(PVC-U)、氯化聚氯乙烯(PVC-C)和高抗冲聚氯乙烯(PVC-HI)管 | Thermoplastic pipes--Determination of tensile properties--Part 2: Pipes made of unplasticized poly(vinyl chloride)(PVC-U)，chlorinated poly(vinyl chloride)(PVC-C)and high-impact poly(vinyl chloride)(PVC-HI) |
| GB/T 8804.3-2003 | 热塑性塑料管材拉伸性能测定第3部分: 聚烯烃管材 | Thermoplastic pipes--Determination of tensile properties--Part 3: Polyolefin pipes |
| GB/T 8806-2008 | 塑料管道系统 塑料部件尺寸的测定 | Plastics piping systems - Plastics components - Determination of dimensions |
| GB/T 8807-1988 | 塑料镜面光泽试验方法 | Test method for specular gloss of plastics |
| GB/T 8808-1988 | 软质复合塑料材料剥离试验方法 | Test method for peel force of flexible laminated plastics |
| GB/T 8809-1988 | 塑料薄膜抗摆锤冲击试验方法 | Test method for pendulum impact resistance of plastic films |
| GB/T 8810-2005 | 硬质泡沫塑料吸水率的测定 | Determination of water absorption of rigid cellular plastics |
| GB/T 8811-2008 | 硬质泡沫塑料 尺寸稳定性试验方法 | Test method for dimensional stability of rigid cellular plastics |
| GB/T 8812.1-2007 | 硬质泡沫塑料 弯曲性能的测定 第1部分：基本弯曲试验 | Rigid cellular plastics - Determination of flexural properties - Part 1: Basic bending test |
| GB/T 8812.2-2007 | 硬质泡沫塑料 弯曲性能的测定 第2部分: 弯曲强度和表观弯曲弹性模量的测定 | Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity |
| GB/T 8813-2008 | 硬质泡沫塑料压缩性能的测定 | Rigid cellular plastics - Determination of compression properties |
| GB/T 8815-2008 | 电线电缆用软聚氯乙烯塑料 | Plasticized polyvinyl chloride （PVC）compounds for wire and cable |
| GB/T 8846-2005 | 塑料成型模术语 | Terminology of moulds for plastics |
| GB/T 8924-2005 | 纤维增强塑料燃烧性能试验方法氧指数法 | Test method for flammability characteristics of fiber reinforced plastics-Oxygen index method |
| GB/T 8946-1998 | 塑料编织袋 | Plastic woven sack |
| GB/T 8947-1998 | 复合塑料编织袋 | Composite plastic woven sack |
| GB/T 9267-2008 | 涂料用乳液和涂料、塑料用聚合物分散体 白点温度和最低成膜温度的测定 | Emulsions for coatings and polymer dispersions for coatings and plastics - Determination of white point temperature and minimum film-forming temperature |
| GB/T 9330.1-2008 | 塑料绝缘控制电缆 第1部分：一般规定 | Plastic insulated control cables - Part 1: General requirements |
| GB/T 9330.2-2008 | 塑料绝缘控制电缆 第2部分：聚氯乙烯绝缘和护套控制电缆 | Plastic insulated control cables - Part 2：Polyvinyl chloride insulated and sheathed control cables |
| GB/T 9330.3-2008 | 塑料绝缘控制电缆 第3部分：交联聚乙烯绝缘控制电缆 | Plastic insulated control cables - Part 3: Cross-linked polyethylene insulated control cables |
| GB/T 9341-2008 | 塑料 弯曲性能的测定 | Plastics - Determination of flexural properties |
| GB/T 9343-2008 | 塑料燃烧性能试验方法 闪燃温度和自燃温度的测定 | Test method for flammability of plastics - Determination of flash-ignition temperature and self-ignition temperature |
| GB/T 9345.1-2008 | 塑料 灰分的测定 第1部分：通用方法 | Plastics - Determination of ash - Part 1: General methods |
| GB/T 9345.2-2008 | 塑料 灰分的测定 第2部分：聚对苯二甲酸烷撑酯 | Plastics - Determination of ash - Part 2: Poly(alkylend terephthalate)materials |
| GB/T 9345.4-2008 | 塑料 灰分的测定 第4部分：聚酰胺 | Plastics - Determination of ash - Part 4: Polyamides |
| GB/T 9348-2008 | 塑料 聚氯乙烯树脂 杂质与外来粒子数的测定 | Plastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign particles |
| GB/T 9350-2003 | 塑料氯乙烯均聚和共聚树脂水萃取液pH值的测定 | Plastics--Homopolymer andcopolymer resins of vinyl chloride--Determination of pH of aqueous extract |
| GB/T 9352-2008 | 塑料 热塑性塑料材料试样的压塑 | Plastic - Compression moulding of test specimens of thermoplastic materials |
| GB/T 9572-2001 | 橡胶和塑料软管及软管组合件电阻的测定 | Rubber and plastics hoses and hose assemblies--Determination of electrical resistance |
| GB/T 9573-2003 | 橡胶、塑料软管及软管组合件尺寸测量方法 | Rubber and plastics hose and hose assemblies--Methods of measurement of dimensions |
| GB/T 9574-2001 | 橡胶和塑料软管及软管组合件试验压力、爆破压力与设计工作压力的比率 | Rubber and plastics hoses and hose assemblies--Ratios of proof and burst pressure to design working pressure |
| GB/T 9575-2003 | 工业通用橡胶和塑料软管内径尺寸及公差和长度公差 | Rubber and plastics hoses for general-purpose industrial applications--Bore diameters and tolerances，and tolerances on length |
| GB/T 9576-2001 | 橡胶和塑料软管及软管组合件选择、贮存、使用和维护指南 | Rubber and plastics hose and hose assemblies--Guide to selection，use，and maintenance |
| GB/T 9577-2001 | 橡胶和塑料软管及软管组合件标志、包装和运输规则 | Rubber and plastics hose and hose assemblies--Rules for marking，package and transportation |
| GB/T 9639.1-2008 | 塑料薄膜和薄片 抗冲击性能试验方法 自由落镖法 第1部分：梯级法 | Plastics film and sheeting - Determination of impact resistance by the free-falling dart methord - Part 1: Staircase methords |
| GB/T 9641-1988 | 硬质泡沫塑料拉伸性能试验方法 | Test method for tensile properties of rigid cellular plastics |
| GB/T 9647-2003 | 热塑性塑料管材环刚度的测定 | Thermoplastics pipes--Determination of ringstiffness |
| GB/T 9900-2008 | 橡胶或塑料涂覆织物 导风筒 | Rubber - or plastics-coated fabrics - Ventilation ducting |
| GB/T 9979-2005 | 纤维增强塑料高低温力学性能试验准则 | Guide rule of test for mechanical properties of fiber-reinforced plastics at elevated and reduced temperatures |
| GB/Z 22074-2008 | 塑料外壳式断路器可靠性试验方法 | Reliability test method for moulded case circuit-breakers |
| HD 21.1 S4-2002 | 额定电压为450/750V及以下的热塑性塑料绝的电缆 第1部分：一般要求 | Cables of rated voltages up to and including 450/750 V and having thermoplastic insulation - Part 1: General requirements |
| HD 21.14 S1-2003 | 额定电压450/750V及以下的热塑性塑料绝的电缆 第14部分：非卤素热塑性塑料化合物的绝缘和包覆的软电缆(软 | Cables of rated voltages up to and including 450/750 V and having thermoplastic insulation - Part 14: Flexible cables (cords), insulated and sheathed with halogen-free thermoplastic compounds |
| HG 2-162-1965 | 塑料低温冲击压缩试验方法 | () |
| HG 2-163-1965 | 塑料薄膜低温伸长试验方法 | () |
| HG/T 2-163-1965(1982) | 塑料低温伸长试验方法 | () |
| HG/T 20640-1997(2009) | 塑料设备 | () |
| HG/T 2106-1991 | 耐酸酚醛塑料 耐酸度的测量 | () |
| HG/T 2107-1991 | 耐酸酚醛塑料 丙酮可溶物的测定 | () |
| HG/T 2128-2009 | 改性酚醛玻璃纤维增强塑料管技术条件 | Specifications for pipe of modified phenolic glass fiber reinforced plastics |
| HG/T 2129-1991 | 耐酸酚醛塑料制化工设备零部件 | () |
| HG/T 2129-2009 | 改性酚醛玻璃纤维增强塑料管件技术条件 | Specifications for pipe fitting of modified phenolic glass fiber reinforced plastics |
| HG/T 2150-2009 | 橡胶塑料压延机检测方法 | Measuring method of rubber calenders & plastics calenders |
| HG/T 21557.3-2006 | 塑料阶梯环填料 | Plastic cascade ring packing |
| HG/T 2232-1991 | 改性聚苯醚工程塑料 | () |
| HG/T 22807-1997 | 化工矿山塑料管道工程设计规范 | () |
| HG/T 2300-1992 | 织物增强可折叠式通用输水塑料软管 | () |
| HG/T 2301-2008 | 压缩空气用织物增强热塑性塑料软管 | () |
| HG/T 2437-2006 | 塑料衬里复合钢管和管件 | Steel pipes and fitting lined with plastic |
| HG/T 2440-1993 | 橡胶或塑料涂覆织物屈挠磨损试验机技术条件 | () |
| HG/T 2577-2006 | 橡胶或塑料提升带 | Rubber and plastics belting for use on bucket elevators |
| HG/T 2580-2008 | 橡胶或塑料涂覆织物 拉伸强度和拉断伸长率的测定 | () |
| HG/T 2581.1-2009 | 橡胶或塑料涂覆织物 耐撕裂性能的测定 第1部分：恒速撕裂法 | Rubber-or plastics-coated fabrics-Determination of tear resistance-Part 1:constant rate of tear methods |
| HG/T 2581.2-2009 | 橡胶或塑料涂覆织物 耐撕裂性能的测定 第2部分：冲击摆锤法 | Rubber-or plastics-coated fabrics-Determination of tear resistance-Part 2:Ballistic pendulum method |
| HG/T 2582-2008 | 橡胶或塑料涂覆织物 耐水渗透性能的测定 | () |
| HG/T 2715-1995(2009) | 橡胶或塑料涂覆织物 抗粘合性的测定 | () |
| HG/T 2716-2008 | 橡胶或塑料涂覆织物 静态耐臭氧龟裂性能的测定 | () |
| HG/T 2718-1995(2009) | 汽车空调用橡胶和塑料软管及软管组合件 | () |
| HG/T 2799-1996 | 吸引和低压排输石油液体用塑料软管 | () |
| HG/T 2867-1997(2009) | 橡胶或塑料涂覆织物调节和试验的标准环境 | () |
| HG/T 2869-1997(2009) | 橡胶和塑料软管 静态条件下耐臭氧性能的评价 | () |
| HG/T 3037-2008 | 计量分配燃油用橡胶和塑料软管及软管组合件 | () |
| HG/T 3045-2008 | 排吸用螺旋线增强的热塑性塑料软管 | () |
| HG/T 3047-2004 | 橡胶或塑料涂覆织物 透气性的测定 | () |
| HG/T 3048-2009 | 橡胶或塑料涂覆织物 耐组合剪切曲挠和磨擦性能的测定 | Rubber-or plastics-coated fabrics-Determination of resistance to combined shear flexing and rubbing |
| HG/T 3049-1999(2009) | 橡胶或塑料涂覆织物 加速老化试验 | () |
| HG/T 3050.1-2001(2009) | 橡胶或塑料涂覆织物整卷特性的测定 第一部分：测定长度、宽度和净质量的方法 | () |
| HG/T 3050.2-2001(2009) | 橡胶或塑料涂覆织物整卷特性的测定 第二部分：测定单位面积的总质量、单位面积的涂覆质量和单位面积底布质 | () |
| HG/T 3050.3-2001(2009) | 橡胶或塑料涂覆织物整卷特性的测定 第三部分：测定厚度的方法 | () |
| HG/T 3052-2008 | 橡胶或塑料涂覆织物 涂覆层粘合强度的测定 | () |
| HG/T 3053-1999(2009) | 橡胶或塑料涂覆织物 柔软性的测定 扁环法 | () |
| HG/T 3077-1999(2009) | 橡胶、塑料辊硬度要求 | () |
| HG/T 3078-2001(2009) | 橡胶、塑料辊 表面特性 | () |
| HG/T 3079-1999(2009) | 橡胶、塑料辊尺寸公差 | () |
| HG/T 3120-1998(2009) | 橡胶塑料机械外观通用技术条件 | () |
| HG/T 3183-1989 | 氟塑料衬里单级单吸化工离心泵技术条件 | () |
| HG/T 3228-2001(2009) | 橡胶塑料机械涂漆通用技术条件 | () |
| HG/T 3249.3-2008 | 塑料工业用重质碳酸钙 | () |
| HG/T 3690-2001 | 工业用钢骨架聚乙稀塑料复合管 | () |
| HG/T 3691-2001 | 工业用钢骨架聚乙稀塑料复合管件 | () |
| HG/T 3704-2003(2009) | 氟塑料衬里阀门通用技术条件 | () |
| HG/T 3732-2004 | 改性酚醛玻璃纤维增强塑料球阀技术条件 | () |
| HG/T 3839-2006 | 塑料剪切强度试验方法 穿孔法 | () |
| HG/T 3840-2006 | 塑料弯曲性能小试样试验方法 | () |
| HG/T 3841-2006 | 塑料冲击性能小试样试验方法 | () |
| HG/T 3842-2006 | 消防用不可折叠型橡胶和塑料软管 第1部分:定位应急设施用轴卷半硬性软管 | () |
| HG/T 3862-2006 | 塑料黄色指数试验方法 | () |
| HG/T 3865-2006 | 热固性模塑料矩道流动固化性试验方法 | () |
| HG/T 3915-2006 | 氟塑料衬里反应釜 | Reacting caldron lined with fluoroplastics |
| HG/T 3986-2007 | 塑料塔填料技术条件 | Specification for plastic tower packing |
| HG/T 4087-2009 | 塑料合金防腐蚀复合管 | Anticorrosion plastic alloy composite pipe |
| HG/T 4088-2009 | 塑料衬里设备 通用技术条件 | General Technical Specification for equipments lined with plastics |
| HG/T 4089-2009 | 塑料衬里设备 水压试验方法 | Hydrostatic pressure test method for equipments lined with plastics |
| HG/T 4090-2009 | 塑料衬里设备 电火花试验方法 | Spark test method for equipments lined with plastics |
| HG/T 4091-2009 | 塑料衬里设备 耐温试验方法 | Temperature test method for equipments lined with plastics |
| HG/T 4092-2009 | 塑料衬里设备 热胀冷缩试验方法 | Expansion and contraction test method for equipments lined with plastics |
| HG/T 4093-2009 | 塑料衬里设备 衬里耐负压试验方法 | Vacuum test method for equipments lined with plastics |
| HG/T 4112-2009 | 塑料衬里储槽和罐式容器技术条件 | Plastic lining storage tand and pot type vessel engineering factor |
| JB/T 10180-2000 | 水轮发电机推力轴承弹性金属塑料瓦技术条件 | () |
| JB/T 10190-2010 | 滚动轴承 包装用塑料筒 | Rolling bearings-Plastic cylinders for packaging |
| JB/T 10342-2002 | 塑料挤出异型材辅机 | () |
| JB/T 10359-2002 | 空调器室外机用塑料环境技术要求 | () |
| JB/T 10464-2004 | 拉条式塑料切粒机 | () |
| JB/T 10594-2006 | 日光温室和塑料大棚结构与性能要求 | () |
| JB/T 10636-2006 | 额定电压0.6/1kV(Um = 1.2kV)铜芯塑料绝缘预制分支电缆 | Copper-conductor extruded plastic insulated cables with pre-fabricated branches for rated voltage of 0.6/1kV(Um=1.2kV) |
| JB/T 10706-2007 | 机械密封用氟塑料全包覆橡胶Ｏ形圈 | () |
| JB/T 10867-2008 | 输送用塑料平顶链和链轮 | () |
| JB/T 10898-2008 | 塑料挤出复合膜辅机 | () |
| JB/T 10899-2008 | 塑料挤出双壁波纹管辅机 | () |
| JB/T 10981-2010 | 玻璃纤维增强塑料轴流通风机 | Glass fiber reinforced plastic axial fans |
| JB/T 10994-2010 | 缠绕式矿井提升设备用塑料衬板 | Plastic lining for winding mine hoist |
| JB/T 20065.1～5-2005 | 塑料瓶瓶装联动线 | () |
| JB/T 20066-2005 | 易折塑料瓶口服液剂灌装机 | Easy-folding plastic-bottle oral liquid filling & sealing machine |
| JB/T 20095-2007 | 塑料输液瓶灌封联动机 | () |
| JB/T 2171-1999 | 额定电压450/750V及以下农用直埋铝芯塑料绝缘塑料护套电线 | () |
| JB/T 2485-1978 | 橡胶塑料机械 产品型号编制方法 | () |
| JB/T 2627-2008 | 塑料挤出硬管辅机 | () |
| JB/T 3199-1994 | 热固性塑料水润滑耐磨材料 | () |
| JB/T 3275-2001 | 圆盘真空过滤机用塑料扇形滤板 | () |
| JB/T 3820-1984 | 塑料制品液压机 精度 | () |
| JB/T 3958.1-1999 | 电气绝缘用热固性模塑料 一般要求 | () |
| JB/T 3958.2-1999 | 电气绝缘用热固性模塑料 试验方法 | () |
| JB/T 4278.1-1993 | 橡皮塑料电线电缆试验仪器设备检定方法 总则 | () |
| JB/T 4278.10-1993 | 橡皮塑料电线电缆试验仪器设备检定方法 火花试验机 | () |
| JB/T 4278.2-1993 | 橡皮塑料电线电缆试验仪器设备检定方法 低温冲击试验装置 | () |
| JB/T 4278.3-1993 | 橡皮塑料电线电缆试验仪器设备检定方法 曲挠试验装置 | () |
| JB/T 4278.4-1993 | 橡皮塑料电线电缆试验仪器设备检定方法 耐磨试验装置 | () |
| JB/T 4278.5-1993 | 橡皮塑料电线电缆试验仪器设备检定方法 单根电线电缆垂直燃烧DZ-1 法试验装置 | () |
| JB/T 4278.6-1993 | 橡皮塑料电线电缆试验仪器设备检定方法 自然通风热老化试验箱 | () |
| JB/T 4278.7-1993 | 橡皮塑料电线电缆试验仪器设备检定方法 恒温水槽 | () |
| JB/T 4278.8-1993 | 橡皮塑料电线电缆试验仪器设备检定方法 低温试验箱 | () |
| JB/T 4278.9-1993 | 橡皮塑料电线电缆试验仪器设备检定方法 氧弹、空气弹老化试验箱 | () |
| JB/T 5290-2008 | 塑料圆织机 | () |
| JB/T 5291-2007 | 塑料破碎机 | () |
| JB/T 5293-1991 | 可发性聚苯乙烯泡沫塑料成型机 | () |
| JB/T 5416-2005 | 塑料挤出干法热切造粒辅机 | () |
| JB/T 5417-2007 | 塑料排气挤出机 | () |
| JB/T 5419-2008 | 塑料挤出平膜扁丝辅机 | () |
| JB/T 5420-2001 | 通向双螺杆塑料挤出机 | () |
| JB/T 5421-1991 | 塑料薄膜回收挤出造粒机组 | () |
| JB/T 5438-2008 | 塑料机械 术语 | () |
| JB/T 5822-1991 | 电气绝缘用酚醛玻璃纤维模塑料 | () |
| JB/T 5985-1992 | 滑动轴承 水润滑热固性塑料轴承 | () |
| JB/T 6057-1992 | 塑料模具成型部分用钢及其热处理 技术条件 | () |
| JB/T 6067-1992 | 气相防锈塑料薄膜 技术条件 | () |
| JB/T 6072-1992 | 塑料耐擦伤性能试验方法 | () |
| JB/T 6162-2004 | 塑料、玻璃珠和金属银幕 通用工艺规范 | () |
| JB/T 6489-1999 | 塑料捏合机 | () |
| JB/T 6490-1992 | 塑料压力成型机 | () |
| JB/T 6491-2001 | 导向双螺杆塑料挤出机 | () |
| JB/T 6492-2001 | 锥形双螺杆塑料挤出机 | () |
| JB/T 6493-1992 | 塑料制袋机 | () |
| JB/T 6494-2002 | 料斗式塑料干燥机 | () |
| JB/T 6542-1993 | 热固性模塑料收缩率的测定 | () |
| JB/T 6543-1993 | 硬质塑料板平面弯曲疲劳特性试验方法 | () |
| JB/T 6544-1993 | 塑料拉伸和弯曲弹性模量试验方法 | () |
| JB/T 6723.2-2008 | 内燃机冷却风扇 第2部分：塑料冷却风扇 技术条件 | () |
| JB/T 6928-1993 | 塑料挤出带辅机 | () |
| JB/T 6929-1993 | 塑料挤出转盘制鞋机 | () |
| JB/T 6942-2007 | 半棚式塑料暖棚 | The plastic stall |
| JB/T 6980.1-1993 | 塑料薄膜和纸压敏粘贴标牌 技术条件 | () |
| JB/T 6980.2-1993 | 塑料薄膜和纸压敏粘贴标牌 试验方法 | () |
| JB/T 7048-2002 | 滚动轴承零件 工程塑料保持架技术条件 | () |
| JB/T 7251-1994 | 塑料挤出拉丝辅机 | () |
| JB/T 7267-2004 | 塑料注射成型机 | () |
| JB/T 7409-1994 | 塑料洛氏硬度计 技术条件 | () |
| JB/T 7410-2010 | 塑料球压痕硬度计 技术条件 | Specification for the ball indentation hardness testers of plastics |
| JB/T 7521-1994 | 塑料-青铜-钢背三层复合自润滑板材 | () |
| JB/T 7525-1994 | 聚丙烯 玻璃纤维增强塑料复合管和管件 | () |
| JB/T 7600.5-2008 | 电线电缆PNS型机用线盘 第5部分：塑料机用线盘 | () |
| JB/T 7669-2004 | 塑料混合机 | () |
| JB/T 7770-191995(2009) | 不饱和聚酯玻璃纤维增强模塑料 | () |
| JB/T 7797-1995 | 橡胶、塑料拉力试验机技术条件 | () |
| JB/T 8043.1-1999 | 机床夹具零件及部件 塑料夹具用六角头螺钉 | () |
| JB/T 8043.2-1999 | 机床夹具零件及部件 塑料夹具用内六角螺钉 | () |
| JB/T 8043.3-1999 | 机床夹具零件及部件 塑料夹具用柱塞 | () |
| JB/T 8061-1996 | 单螺杆塑料挤出机 | () |
| JB/T 8312.1-2005 | 中小型异步电机用工程塑料风扇 技术条件（机座号63～355） | () |
| JB/T 8400-1996 | 无泄漏磁力传动塑料自吸泵 | () |
| JB/T 8458-1996 | 电气设备辅件塑料制品一般要求和试验方法 | () |
| JB/T 8507-1996 | 高频塑料热合机 | () |
| JB/T 8538-1997 | 塑料机械用螺杆、机筒 | () |
| JB/T 8539-1997 | 塑料挤出吹塑中空成型机 | () |
| JB/T 8589-2006 | 玻璃纤维增强塑料复合检查井盖 | () |
| JB/T 8688-1998 | 塑料离心泵 | () |
| JB/T 8698-1998 | 热固性塑料注射成型机 | () |
| JB/T 8703-1998 | 塑料挤出吹塑薄膜辅机 | () |
| JB/T 8720-1998 | 拖拉机用热塑性塑料零件 通用技术条件 | () |
| JB/T 8744-2008 | 塑料挤出模 术语 | () |
| JB/T 8745-2008 | 塑料异型材挤出模 技术条件 | () |
| JB/T 8746.1-2008 | 塑料异型材挤出模零件 第1部分：矩形模板 | () |
| JB/T 8746.2-2008 | 塑料异型材挤出模零件 第2部分：圆形模板 | () |
| JB/T 8746.3-2008 | 塑料异型材挤出模零件 第3部分：矩形机颈 | () |
| JB/T 8746.4-2008 | 塑料异型材挤出模零件 第4部分：圆形机颈 | () |
| JB/T 8746.5-2008 | 塑料异型材挤出模零件 第5部分：定型块 | () |
| JB/T 8746.6-2008 | 塑料异型材挤出模零件 第6部分：型板 | () |
| JB/T 8746.7-2008 | 塑料异型材挤出模零件 第7部分：定位零件 | () |
| JB/T 8920-1999 | 工程塑料内链节轻型输送链 | () |
| JB/T 9086-2007 | 塑料袋热压式封口机 | Plastic bag heating sealer |
| JB/T 9447-1999 | 静电复印机用涂氟塑料定影辊 技术条件 | () |
| JC 586-1995 | 热固化玻璃纤维增强塑料食品容器 | () |
| JC/T 1010-2006 | 卫星地球接收站用片状模塑料（SMC）天线反射面 | () |
| JC/T 1027-2007 | 接触轨玻璃纤维增强塑料防护罩 | Glass fiber reinforced plastics protective cover of contact rail |
| JC/T 1092-2008 | 纤维增强塑料机械成型用不饱和聚酯树脂 | () |
| JC/T 349-1983(1996) | 玻璃纤维增强塑料平板拉-拉疲劳性能试验方法 | () |
| JC/T 490-1992 | 玻璃纤维增强热固性塑料拉挤型材的尺寸公差 | () |
| JC/T 491-1992（1996） | 增强塑料拉挤型材按组分分类的方法 | () |
| JC/T 492-1992(1996) | 火车客车用片状模塑料(SMC)窗框 | () |
| JC/T 516-1993 | 自应力钢筋混凝土输水管用塑料嵌件 | () |
| JC/T 550-2008 | 聚氯乙烯块状塑料地板胶粘剂 | () |
| JC/T 553-1994 | 玻璃纤维增强塑料离心通风机 | () |
| JC/T 587-1995 | 纤维缠绕增强塑料贮罐 | () |
| JC/T 658.1-2007 | 玻璃纤维增强塑料水箱 第1部分：SMC组合式水箱 | Glass fiber reinforced plastics water tanks Part 1:SMC sectional water tanks |
| JC/T 658.2-1997 | 玻璃纤维增强塑料水箱 第2部分：手糊成型整体式水箱 | () |
| JC/T 692-1998 | 反渗透水处理装置用玻璃纤维增强塑料压力壳体 | () |
| JC/T 717-1990(1996) | 地面用玻璃纤维增强塑料压力容器 | () |
| JC/T 764-2001 | 坐便器塑料坐圈和盖 | () |
| JC/T 773-1982(1996) | 单向纤维增强塑料层间剪切强度试验方法 | () |
| JC/T 779-2000 | 玻璃纤维增强塑料浴缸 | () |
| JC/T 782-1987(1996) | 玻璃纤维增强塑料透光率试验方法 | () |
| JC/T 783-2004 | 玻璃纤维增强改性酚醛塑料球阀 | () |
| JC/T 939-2004 | 建筑用抗菌塑料管抗细菌性能 | () |
| JC/T 941-2004 | 门窗用玻璃纤维增强塑料拉挤中空型材 | () |
| JC/T 944-2005 | 彩喷片状模塑料（SMC）瓦 | () |
| MT 141－2005 | 煤矿井下用塑料网假顶带 | () |
| MT 181-1988(2005) | 煤矿井下用塑料管安全性能检验规范 | () |
| MT 558.1－2005 | 煤矿井下用塑料管材 第1部分：聚乙烯管材 | () |
| MT 558.2－2005 | 煤矿井下用塑料管材 第2部分：聚氯乙烯管材 | () |
| MT 558.3-2006 | 煤矿井下用塑料管材 第3部分：玻璃钢管材 | () |
| MT 558.3－2005 | 煤矿井下用塑料管材 第3部分：玻璃钢管材 | () |
| MT 756-1997(2005) | 隔爆水槽用聚苯乙烯泡沫塑料阻燃性能试验方法 | () |
| MT 960-2005 | 煤矿井下假顶用塑料编织布 | () |
| MT/T 1061-2007 | 树脂锚杆 玻璃纤维增强塑料杆体及附件 | () |
| MT/T 783-1998 | 沸腾炉灰渣制橡胶塑料补强填料技术条件 | () |
| QB 1110-1991 | 聚氨酸 ,聚苯工烯 ,聚乙烯泡沫塑料生产安全技术规程 | () |
| QB 1532-1992 | 塑料制品加工企业职业安全卫生设计规定 | () |
| QB 1999-1994(2009) | 密胺塑料餐具 | () |
| QB 2495-2000 | 聚氯乙烯塑料生产防尘防毒技术规程 | () |
| QB/T 1046-2003 | 凹版塑料薄膜表印油墨 | () |
| QB/T 1124-1991(2009) | 聚氯乙烯塑料鞋底 | () |
| QB/T 1129-1991(2009) | 塑料门窗-硬物撞击试验方法 | () |
| QB/T 1130-1991(2009) | 塑料直角撕裂性能试验方法 | () |
| QB/T 1232-1991(2009) | 软质聚氨脂泡沫塑料复合材料 | () |
| QB/T 1235-1991(2009) | 塑料门窗合叶(铰链) | () |
| QB/T 1434-1992(2009) | 塑料挤出拉伸网 | () |
| QB/T 1647-1992(2009) | 无基材聚氯乙烯塑料卷材地板 | () |
| QB/T 1649-1992(2009) | 聚苯乙烯泡沫塑料包装材料 | () |
| QB/T 1651-1992(2009) | 聚乙烯塑料中空板 | () |
| QB/T 1653-1992(2009) | 聚氯乙烯塑料凉鞋、拖鞋 | () |
| QB/T 1870-1993(2009) | 塑料菜板 | () |
| QB/T 2000-1994(2009) | 塑料遮阳(光)网 | () |
| QB/T 2024-1994 | 凹版复合塑料薄膜油墨 | () |
| QB/T 2080-2010 | 高回弹软质聚氨酯泡沫塑料 | Flexible cellular polymeric materials-high-resilience polyurethane foam |
| QB/T 2081-1995(2009) | 冰箱、冰柜用硬质聚氨酯泡沫塑料 | () |
| QB/T 2309-1997(2009) | 塑料铅笔擦 | () |
| QB/T 2358-1998(2009) | 塑料薄膜包装袋热合强度试验方法 | () |
| QB/T 2411-1998(2009) | 硬质泡沫塑料水蒸气透过性能的测定 | () |
| QB/T 2462.1-1999(2009) | 电线电缆用辐照交联聚烯烃塑料额定电压0～10KV聚乙烯绝缘料 | () |
| QB/T 2568-2002(2009) | 硬聚氯乙烯(PVCU)塑料管道系统用溶液剂型胶粘剂 | () |
| QB/T 2591-2003(2009) | 抗菌塑料-抗菌性能试验方法和抗菌效果 | () |
| QB/T 2667.1-2004 | 埋地通信用多孔一体塑料管材 第1部分：硬聚氯乙烯（PVC-U）多孔一体管材 | () |
| QB/T 2667.2-2004 | 埋地通信用多孔一体塑料管材 第2部分：聚乙烯（PE）多孔一体管材 | () |
| QB/T 2669-2004 | 泡沫塑料吸水性试验方法 | () |
| QB/T 2670-2004 | 降解塑料片材定义、分类、标志和降解性能要求 | () |
| QB/T 2671-2004 | 生物分解塑料片材定义、标志和生物分解性能要求 | () |
| QB/T 2672-2004 | 可堆肥塑料片材定义、标志和可堆肥性能要求 | () |
| QB/T 2803－2006 | 硬质塑料管材弯曲度测量方法 | () |
| QB/T 2854-2007 | 塑料土工格栅蠕变试验和评价方法 | Creep testing and evaluating method on plastic georids |
| QB/T 2904-2007 | 自结皮硬质聚氨酯泡沫塑料 | Rigid self-skinned polyurethane cellular plastics |
| QB/T 2957-2008 | 淀粉基塑料中淀粉含量的测定 热重法(TG) | Determination of starch content of starch based plastics |
| QB/T 3631-1999(2009) | 聚氯乙烯塑料波纹电线管 | () |
| QB/T 3650-1999 | 甲基丙烯酸甲酯共聚模塑料 | () |
| QB/T 3677-1999 | 塑料压延设备劳动安全技术规程 | () |
| QB/T 3808-1999(2009) | 复合塑料编织布 | () |
| QB/T 3810-1999(2009) | 塑料网眼袋 | () |
| QB/T 3811-1999 | 塑料打包带 | () |
| QB/T 4012-2010 | 淀粉基塑料 | Starch-based Plastics |
| QB/T 4049-2010 | 塑料饮水口杯 | Plastic cup for drinking |
| QB/T 6808-1999 | 复合塑料编织布 | () |
| QC/T 15-1992(2005) | 汽车塑料制品通用试验方法 | () |
| QC/T 29017-1991(2009) | 汽车模制塑料零件未注公差尺寸的极限偏差 | () |
| QC/T 346-1999(2009) | 塑料堵塞 | () |
| QC/T 349-1999(2005) | 塑料紧箍带 | () |
| QC/T 350-1999(2009) | 塑料开尾销钉 | () |
| QC/T 438-1999(2005) | 汽车点火系高压塑料件技术条件 | () |
| QC/T 614-1999(2009) | 塑料真空成型机 | () |
| QC/T 617-1999(2009) | 端封式嵌装塑料螺母 | () |
| QC/T 618-1999(2009) | 嵌装塑料螺母 技术条件 | () |
| QC/T 641-2005 | 汽车用塑料密封条 | Plastic weatherstrips for automobile |
| QC/T 713-2004 | 塑料（尼龙）用自攻螺钉螺纹 | () |
| QC/T 797-2008 | 汽车塑料件、橡胶件和热塑性弹性体件的材料标识和标记 | Material identification & marking of automotive plastic,rubber & thermoplastic elastomer parts |
| QC/T 798-2008 | 汽车用多层塑料燃油管 | Multi-layers plastic tubing for automotive fuel system |
| SB/T 10179-1993 | 塑料类商品储藏技术 | () |
| SH/T 1541-2006 | 热塑性塑料颗粒外观试验方法 | () |
| SY/T 0415-1996 | 埋地钢质管道硬质聚氨酯泡沫塑料防腐保温层技术标准 | () |
| SY/T 0603-2005 | 玻璃纤维增强塑料储罐规范 | () |
| SY/T 415-1996 | 埋地钢质管道硬质聚氨酯泡沫塑料防腐保温层技术标准 | () |
| SY/T 5736-1995 | 增强塑料抽油杆 | () |
| SY/T 5860-1993 | 塑料球投球器 | () |
| SY/T 6123-1995 | 双层预充填塑料防砂筛管 | () |
| Tapping screws thread for plastic(nylon) | 塑料文具盒 | () |
| YB/T 094-1997(2006年确认) | 塑料模具用扁钢 | () |
| YB/T 107-1997(2006年确认) | 塑料模具用热轧厚钢板 | () |
| YB/T 129-1997(2006年确认) | 塑料模具钢模块技术条件 | () |
| YB/T 4132-2005 | 循环流化床锅炉用耐磨耐火可塑料 | () |
| YB/T 5115-1993 | 粘土质和高铝质耐火可塑料 | () |
| YB/T 5116-1993(2005) | 粘土质和高铝质耐火可塑料试样制备方法 | () |
| YB/T 5117-1993(2005) | 粘土质和高铝质耐火可塑料线变化率试验方法 | () |
| YB/T 5118-1993(2005) | 粘土质和高铝质耐火可塑料强度试验方法 | () |
| YB/T 5119-1993(2005) | 粘土质和高铝质耐火可塑料可塑性指数试验方法 | () |
| 编号 | 中文名称 | 英文名称 |