| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| EN 3212-1995 | 航空航天系列 油漆和清漆 在缓冲氯化纳溶剂中用更换浸渍试验测定耐蚀性 | Aerospace series - Paints and varnishes - Corrosion test by alternate immersion in a buffered sodium chloride solution |
| EN ISO 11124-1-1997 | 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求 第1部分：一般介绍及分类 | Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 1: General introduction and classification (ISO 11124-1:1993) |
| EN ISO 11124-2-1997 | 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求 第2部分：冷硬铸铁丸 | Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 2: Chilled-iron grit (ISO 11124-2:1993) |
| EN ISO 11124-3-1997 | 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求 第3部分：高碳铸钢丸和砂 | Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 3: High-carbon cast-steel shot and grit (ISO 11124-3:1993) |
| EN ISO 11124-4-1997 | 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求 第4部分：低碳铸钢丸 | Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4: Low-carbon cast-steel shot (ISO 11124-4:1993) |
| EN ISO 11125-1-1997 | 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法第1部分：抽样 | Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11125-1:1993) |
| EN ISO 11125-2-1997 | 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法第2部分：颗粒尺寸分布的测定 | Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11125-2:1993) |
| EN ISO 11125-3-1997 | 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法第3部分：硬度测定 | Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 3: Determination of hardness (ISO 11125-3:1993) |
| EN ISO 11125-4-1997 | 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法第4部分：表观密度测定 | Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 4: Determination of apparent density (ISO 11125-4:1993) |
| EN ISO 11125-5-1997 | 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法第5部分：缺陷颗粒的百分比和微结构的测定 | Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 5: Determination of percentage defective particles and of microstructure (ISO 11125-5:1993) |
| EN ISO 11125-6-1997 | 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法第6部分：外来杂质测定 | Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 6: Determination of foreign matter (ISO 11125-6:1993) |
| EN ISO 11125-7-1997 | 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法第7部分：含水量测定 | Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 7: Determination of moisture (ISO 11125-7:1993) |
| EN ISO 11126-1-1997 | 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求第1部分：总体介绍和分类(包括技术勘误1 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification (ISO 11126-1:1993, including Technical Corrigenda 1:1997 and 2: |
| EN ISO 11126-3-1997 | 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求第3部分：铜精炼渣 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 3: Copper refinery slag (ISO 11126-3:1993) |
| EN ISO 11126-4-1998 | 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求第4部分：煤炉渣 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 4: Coal furnace slag (ISO 11126-4:1993) |
| EN ISO 11126-5-1998 | 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求第5部分：镍精炼渣 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 5: Nickel refinery slag (ISO 11126-5:1993) |
| EN ISO 11126-6-1997 | 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求第6部分：炼铁炉渣 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron furnace slag (ISO 11126-6:1993) |
| EN ISO 11126-7-1999 | 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求第7部分：熔融氧化铝 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide (ISO 11126-7:1995) |
| EN ISO 11126-8-1997 | 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求第8部分：橄榄石砂 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine sand (ISO 11126-8:1993) |
| EN ISO 11127-1-1997 | 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第1部分：抽样 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11127-1:1993) |
| EN ISO 11127-2-1997 | 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第2部分：颗粒尺寸分布的测定 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11127-2:1993) |
| EN ISO 11127-3-1997 | 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第3部分：表观密度测定 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density (ISO 11127-3:1993) |
| EN ISO 11127-4-1997 | 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第4部分：通过玻璃载片试验评定硬度 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test (ISO 11127-4:1993) |
| EN ISO 11127-5-1997 | 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第5部分：含水量测定 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 5: Determination of moisture (ISO 11127-5:1993) |
| EN ISO 11127-6-1997 | 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第6部分：通过测量电导率测定水溶性杂质 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO 11127-6:1993) |
| EN ISO 11127-7-1997 | 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第7部分：水溶性氯化物的测定 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 7: Determination of water soluble chlorides (ISO 11127-7:1993) |
| EN ISO 21227-1-2003 | 油漆和清漆 用光学成像法评价涂漆表面的缺陷 第1部分：一般指南 | Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 1: General guidance (ISO 21227-1:2003) |
| EN ISO 8501-1 Supplement-2001 | 涂装油漆和有关产品前钢材预处理 表面清洁度的目视评定 第1部分的补充信息：用不同磨料喷砂处理时钢表面 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Informative supplement to Part 1: Representative photographic examples of the change of appearance imparted to steel when blast |
| EN ISO 8501-1-2001 | 涂装油漆和有关产品前钢材预处理 表面清洁度的目视评定 第1部分：未涂装的钢材和全面清除原有涂层后钢材 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previo |
| EN ISO 8501-2-2001 | 涂装油漆和有关产品前钢材预处理 表面清洁度的目视评定 第2部分：局部清除原有涂层后钢材的锈蚀等级 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings (ISO 8501-2:1994) |
| EN ISO 8502-2-1999 | 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第2部分：清理过的表面上的氯化物的实验室测定 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:1992) |
| EN ISO 8502-3-1999 | 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第3部分：油漆前预处理后的钢材表面上的灰尘评定 | Preparation of steel substrates before application of paint and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (ISO 8502-3:1992) |
| EN ISO 8502-4-1999 | 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第4部分：油覆前凝露可能性的评定导则 | Preparation of steel substrates before application of paint and related products - Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO 8502-4:1993) |
| EN ISO 8502-6-1999 | 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第6部分：分析用可溶性杂质的提取 Bresle法 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis - The Bresle method (ISO 8502-6:1995) |
| EN ISO 8502-9-2000 | 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第9部分：水溶性盐的现场电导测定法 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts (ISO 8502-9:1998) |
| EN ISO 8503-1-1995 | 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第1部分：磨料喷射清理表面粗糙度的ISO评 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abr |
| EN ISO 8503-2-1995 | 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第2部分：磨料喷射清理表面粗糙度的定级 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proce |
| EN ISO 8503-3-1995 | 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第3部分：ISO表面轮廓比较仪的校准方法和 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of s |
| EN ISO 8503-4-1995 | 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第4部分：ISO表面轮廓比较仪的校准方法和 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of s |
| EN ISO 8504-1-2001 | 涂装油漆和有关产品前钢材预处理 表面预处理方法 第1部分：总则 | Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles (ISO 8504-1:2000) |
| EN ISO 8504-2-2001 | 涂装油漆和有关产品前钢材预处理 表面预处理方法 第2部分：磨料喷射清理 | Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO 8504-2:2000) |
| EN ISO 8504-3-2001 | 涂装油漆和有关产品前钢材预处理 表面预处理方法 第3部分：手工和动力工具清洗 | Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 3: Hand- and power-tool cleaning (ISO 8504-3:1993) |
| ENV 12837-2000 | 涂料和油漆 采用防护漆的钢结构防蚀措施检查员的资格 | Paints and varnishes - Qualification of inspectors for corrosion protection of steel structures by protective paint systems |
| ENV ISO 8502-1-1999 | 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第1部分：可溶性铁锈现场试验 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 1: Field test for soluble iron corrosion products (ISO/TR 8502-1:1991) |
| prEN 971-2-1996 | 色漆和清漆 涂层材料的术语和定义 第2部分：与油漆特性和性能有关的特定术语 | Paints and varnishes - Terms and definitions for coating materials - Part 2: Special terms relating to paint characteristics and properties |
| prEN ISO 19840-2003 | 油漆和清漆 用防护漆对钢结构粗表面进行防腐 干膜厚度的测量及验收标准 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Measurement of and acceptance criteria for the dry-film thickness of coatings on rough surfaces (ISO/FDIS 19840:2003) |
| 编号 | 中文名称 | 英文名称 |