| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| ISO 10664-2005 | 螺栓和螺钉用内板拧的六角花形 | Hexalobular internal driving feature for bolts and screws |
| ISO 11926-2-1995 | 通用和液压传动用联接件 带ISO 725螺纹和O形圈密封的油口和螺纹端头 第2部分:重型(S 系列)螺栓端头 | Connections for general use and fluid power - Ports and stud ends with ISO 725 threads and O-ring sealing - Part 2: Heavy-duty (S series) stud ends |
| ISO 11926-3-1995 | 通用和液压传动用联接件 带ISO 725螺纹和O形圈密封的油口和螺纹端头 第3部分:轻型(L 系列)螺栓端头 | Connections for general use and fluid power - Ports and stud ends with ISO 725 threads and O-ring sealing - Part 3: Light-duty (L series) stud ends |
| ISO 12149-1999 | 螺栓连接阀盖的通用钢制截止阀 | Bolted bonnet steel globe valves for general-purpose applications |
| ISO 12258-1998 | 航空航天 强度等级小于或等于1275MPa、金属材料制成、有涂覆或未涂覆、具有长MJ螺纹及大径或中径杆型的双六 | Aerospace - Bolts, reduced bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1275 MPa - Dimensions |
| ISO 13918-1998 | 焊接 电弧螺栓焊用螺栓和陶瓷箍套 | Welding - Studs and ceramic ferrules for arc stud welding |
| ISO 14555-2006 | 焊接.金属材料的电弧螺栓焊 | Welding - Arc stud welding of metallic materials |
| ISO 15071 Technical Corrigendum 1-2006 | 六角法兰面螺栓.小型系列.产品等级A级.技术勘误1 | Hexagon bolts with flange - Small series - Product grade A; Technical Corrigendum 1 |
| ISO 15071-1999 | 六角法兰面螺栓 小系列 产品等级A级 | Hexagon bolts with flange - Small series - Product grade A |
| ISO 15072 Technical Corrigendum 1-2006 | 米制细牙螺纹六角法兰面螺栓.小型系列.产品等级A级.技术勘误1 | Hexagon bolts with flange with metric fine pitch thread - Small series - Product grade A; Technical Corrigendum 1 |
| ISO 15072-1999 | 米制细牙螺纹六角法兰面螺栓 小系列 产品等级A级 | Hexagon bolts with flange with metric fine pitch thread - Small series - Product grade A |
| ISO 16030 AMD 1-2005 | 气压传动.连接.气口和双头螺栓端.修改件1 | Pneumatic fluid power - Connections - Ports and stud ends; Amendment 1 |
| ISO 16030-2001 | 气压传动 连接 气口和双头螺栓端 | Pmeumatic fluid power - Connections - Portsand and stud ends |
| ISO 1891-1979 | 螺栓、螺钉、螺母和附件 名词和术语 三种语言版 | Bolts, screws, nuts and accessories; terminology and nomenclature trilingual edition |
| ISO 2184-1972 | 工业用脚轮.顶板尺寸.第1部分:有4个螺栓孔的长形顶板 | Industrial castors; Dimensions of top plates; Part I : Oblong top-plates with 4 bolt holes |
| ISO 225-1983 | 紧固件 螺栓、螺钉、螺柱和螺母 尺寸代号和标注 三种语言版 | Fasteners; Bolts, screws, studs and nuts; Symbols and designations of dimensions Trilingual edition |
| ISO 262-1998 | ISO一般用途米制螺纹 螺钉、螺栓和螺母的选用尺寸 | ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts |
| ISO 263-1973 | ISO英制螺纹 直径与螺距系列及螺钉、螺栓和螺母的选用系列 直径范围0.06英寸～6英寸 | ISO inch screw threads; General plan and selection for screws, bolts and nuts; Diameter range 0,06 to 6 in |
| ISO 273-1979 | 紧固件 螺栓和螺钉用通孔 | Fasteners; Clearance holes for bolts and screws |
| ISO 299-1987 | 机床工作台 T形槽和相应螺栓 | Machine tool tables; T-slots and corresponding bolts |
| ISO 3185-1993 | 航空航天 强度等级小于或等于1100MPa、有涂层或无涂层、金属材料制成、短的或中等长度MJ螺纹、大径杆型的普 | Aerospace; bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions |
| ISO 3186-1994 | 航空航天 强度等级1250 MPa～1800 MPa、有涂层或无涂层、金属材料制成的标准柄、短或中等长度MJ螺纹、大径 | Aerospace - Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1250 MPa to 1800 MPa - Dimensions |
| ISO 3193 Technical Corrigendum 1-1992 | 航空航天 强度等级小于或等于1100 MPa、有涂层或无涂层、金属材料制成、短的或中等长度MJ螺纹、大径杆型普 | Aerospace; bolts, normal hexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPA; dimensions; technical corrigendum 1 |
| ISO 3193-1991 | 航空航天 强度等级小于或等于1100 MPa、有涂层或无涂层、金属材料制成、短的或中等长度MJ螺纹、大径杆型普 | Aerospace; bolts, normal hexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions |
| ISO 3203-1993 | 航空航天.强度等级小于或等于1100MPa、有涂层或无涂层、金属材料制成的标准直径或中径柄、长MJ螺纹、普通双 | Aerospace; bolts, normal bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions |
| ISO 3506-1-1997 | 耐腐蚀不锈钢紧固件的机械性能 第1部分:螺栓、螺钉和螺柱 | Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 1: Bolts, screws and studs |
| ISO 4014-1999 | 六角头螺栓 产品等级A和B级 | Hexagon head bolts - Product grades A and B |
| ISO 4015-1979 | 六角头螺栓 产品等级B级 细杆:(杆径近似等于中径) | Hexagon head bolts; Product grade B; Reduced shank (Shank diameter = pitch diameter) |
| ISO 4016-1999 | 六角头螺栓 产品等级C级 | Hexagon head bolts - Product grade C |
| ISO 4162-1990 | 六角法兰面螺栓 小系列 | Hexagon flange bolts; small series |
| ISO 4759-1-2000 | 紧固件公差 第1部分:螺栓、螺钉、螺栓和螺母 产品等级A、B和C级 | Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts - Product grades A, B and C |
| ISO 4759-3-2000 | 紧固件公差 第3部分:螺栓、螺钉和螺母用平垫圈 产品等级为A和C级 | Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts - Product grades A and C |
| ISO 5713-1990 | 土壤耕作设备 土壤耕作部件的固定螺栓 | Equipment for working the soil; fixing bolts for soil working elements |
| ISO 5843-3-1997 | 航空航天 同义术语表 第3部分:航空航天用螺栓和螺母 三种语言版 | Aerospace - List of equivalent terms - Part 3: Aerospace bolts and nuts |
| ISO 5855-2-1999 | 航空航天 MJ螺纹 第2部分:螺栓和螺母螺纹的极限尺寸 | Aerospace - MJ threads - Part 2: Limit dimensions for bolts and nuts |
| ISO 5857-1988 | 航空航天 强度等级1250 MPa带有MJ螺纹的合金钢凸头螺栓 采购规范 | Aerospace; alloy steel protruding head bolts with strength classification 1250 MPa and MJ threads; procurement specification |
| ISO 5894-1999 | 船舶与海上技术 盖子用螺栓固定的人孔 | Ships and marine technology - Manholes with bolted covers |
| ISO 6002-1992 | 用螺栓连接阀盖的钢制闸阀 | Bolted bonnet steel gate valves |
| ISO 6157-1-1988 | 紧固件 表面缺陷 第1部分:螺栓、螺钉和螺柱特殊要求 | Fasteners surface discontinuities; part 1: bolts, screws and studs for general requirements |
| ISO 6157-3-1988 | 紧固件 表面缺陷 第3部分:螺栓、螺钉和螺柱特殊要求 | Fasteners; surface discontinuities; part 3: bolts, screws and studs for special requirements |
| ISO 6164-1994 | 液压传动.25MPa和40MPa(250 bar和400 bar)压力下使用的四螺栓整体方法兰 | Hydraulic fluid power; four-srew, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar) |
| ISO 6305-4-1985 | 铁道部件 交货技术条件 第4部分:鱼尾板和紧固件用的非处理钢螺母和螺栓及高强度螺母和螺栓 | Railway components; technical delivery requirements; part 4: untreated steel nuts and bolts and high-strength nuts and bolts for fish-plates and fastenings |
| ISO 7378-1983 | 紧固件 螺栓、螺钉和螺柱 开口销孔和金属丝孔 | Fasteners; Bolts, screws and studs; Split pin holes and wire holes |
| ISO 7689-1988 | 航空航天 强度等级1100 MPa、带MJ螺纹的合金钢螺栓 采购规范 | Aerospace; alloy steel bolts with strength classification 1100 MPa and MJ threads; procurement specification |
| ISO 7852-1983 | 土方机械 防松螺栓头 形状和尺寸(螺纹尺寸除外) | Earth-moving machinery; Plough bolt heads; Shapes and dimensions (excluding thread dimensions) |
| ISO 7913-1994 | 航空航天 米制螺栓和螺钉的形状和位置公差 | Aerospace - Bolts and screws, metric - Tolerances of form and position |
| ISO 7961-1994 | 航空航天 螺栓 试验方法 | Aerospace; bolts; test methods |
| ISO 8168-1988 | 航空航天 强度等级为1100 MPa、带MJ螺纹的耐腐蚀和耐热钢制螺栓 采购规范 | Aerospace; corrosion- and heat-resisting steel bolts with strength classification 1100 MPa and MJ threads; procurement specification |
| ISO 8678-1988 | 小半圆头低方颈螺栓B级 | Cup head square neck bolts with small head and short neck; product grade B |
| ISO 8765-1999 | 米制细牙六角头螺栓 产品等级A和B级 | Hexagon head bolts with metric fine pitch thread - Product grades A and B |
| ISO 8820-4-2002 | 道路车辆.熔断器.第4部分:阴性接触(类型A)、螺栓接触(类型B) 及其试验夹具熔断器 | Road vehicles - Fuse links - Part 4: Fuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures |
| ISO 8820-6-2007 | 道路车辆.熔断器.第6部分:单螺栓连接熔断器 | Road vehicles - Fuse-links - Part 6: Single-bolt fuse-links |
| ISO 8839-1986 | 紧固件机械性能 有色金属制造的螺栓、螺钉、螺柱和螺母 | Mechanical properties of fasteners; Bolts, screws, studs and nuts made of non-ferrous metals |
| ISO 885-2000 | 普通螺栓和螺钉 米制系列 头下圆角半径 | General purpose bolts and screws - Metric series - Radii under the head |
| ISO 887 Technical Corrigendum 1-2006 | 通用米制螺栓、螺钉和螺母用普通垫圈.一般示意图.技术勘误1 | Plain washers for metric bolts, screws and nuts for general purposes - General plan; Technical Corrigendum 1 |
| ISO 887-2000 | 米制普通螺栓、螺钉和螺母用平垫圈 总方案 | Plain washers for metric bolts, screws and nuts for general purposes - General plan |
| ISO 888-1976 | 螺栓、螺钉和螺柱 普通螺栓的公称长度及螺纹长度 | Bolts, screws and studs; Nominal lengths, and thread lengths for general purpose bolts |
| ISO 898-1-1999 | 碳钢和铸钢制造的紧固件机械性能 第1部分:螺栓、螺钉和螺柱 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs |
| ISO 898-7-1992 | 紧固件机械性能 第7部分:螺栓与螺钉的扭矩试验和最小扭矩公称直径1mm～10mm | Mechanical properties of fasteners; part 7: torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm,ISO 9974-1:2000 |
| ISO 8992-2005 | 紧固件.螺栓、螺钉、螺柱和螺母通用技术条件 | Fasteners - General requirements for bolts, screws, studs and nuts |
| ISO 9152-1998 | 航空航天 强度等级为1100 MPa的钛合金MJ螺纹螺栓 采购规范 | Aerospace - Bolts, with MJ threads, in titanium alloys, strength class 1100 MPa - Procurement specification |
| ISO 9154-1999 | 航空航天 由强度等级为1550 MPa的耐热镍基合金制成的带MJ螺纹的螺栓 采购规范 | Aerospace - Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1550 MPa - Procurement specification |
| ISO 9219-2002 | 航空航天.滑轮用合金钢和镀镉或钛合金钢、MoS<下标2>润滑或耐腐蚀钢和钝化的紧公差柄、短螺纹薄六角头螺栓. | Aerospace - Bolts, thin hexagonal head, for pulleys, close tolerance shank, short thread, in alloy steel and cadmium-plated or in titanium alloy steel, MoS<(Index)2> lubricated or in corrosion-resistant steel and passivated - Dimensions and masses |
| ISO 9254-1993 | 航空航天.强度等级小于或等于1100MPa、有涂层或无涂层、金属材料制成的标准直径或中径柄、长MJ螺纹、普通在 | Aerospace; bolts, normal spline head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions |
| ISO 9255-1993 | 航空航天.强度等级小于或等于1100MPa、有涂层或无涂层、金属材料制成的标准柄、短或中等长度MJ螺纹、普通在 | Aerospace; bolts, normal spline head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions |
| ISO 9256-1993 | 航空航天.强度等级小于或等于1100MPa、有涂层或无涂层、金属材料制成的标准直径或中径柄、长MJ螺纹、大六角 | Aerospace; bolts, large hexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions |
| ISO 9749-2000 | 航空航天 航空器操纵钢丝绳上的锻制耐腐蚀柱螺栓端 尺寸及载荷 | Aerospace - Stud-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions and loads |
| ISO 9974-1-1996 | 通用和液压传动用联接件 带ISO 261弹性螺纹或金属-金属密封的气门和双头螺栓端头 第1部分:螺纹气门 | Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports |
| ISO 9974-2-1996 | 通用和液压传动用联接件 带ISO 261弹性螺纹或金属-金属密封的气门和双头螺栓端头 第2部分:弹性密封的双头螺 | Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E) |
| ISO 9974-3-1996 | 通用和液压传动用联接件 带ISO 261弹性螺纹或金属-金属密封的气门和双头螺栓端头 第3部分:金属-金属密封的 | Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B) |
| ISO 9974-4-2006 | 通用和液压传动用联接件.带ISO 261弹性螺纹或金属-金属密封的气门和双头螺栓端头.第4部分:内外六角气门栓的 | Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs |
| 编号 | 中文名称 | 英文名称 |