英国焊接标准(BS welding standards)

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF |  DIC
编号 中文名称 英文名称
BS 1722-10-2006 栅栏.链节和焊接筛网的防盗栅栏用规范 Fences - Specification for anti-intruder fences in chain link and welded mesh
BS 1894-1992 焊接结构的电热锅炉的设计和制造规范 Specification for design and manufacture of electric boilers of welded construction
BS 2790-1992 焊接结构的壳式锅炉的设计和制造规范 Specification for design and manufacture of shell boilers of welded construction
BS 2S 510-1970 碳钢薄板和带材规范(430/540 MPa)(适用于焊接) Specification for carbon steel sheet and strip (430/540 MPa) (suitable for welding)
BS 2S 511-1970 深拉碳钢薄钢板和带材的规范(280/400 MPa)(适用于焊接) Specification for deep drawing carbon steel sheet and strip (280/400 MPa) (suitable for welding)
BS 2S 514-1969 碳锰钢薄板和带材规范(淬火和回火条件:77/100MPa)(适用于焊接) Specification for carbon-manganese steel sheet and strip (for use in the hardened and tempered condition: 770/1000 MPa) (suitable for welding)
BS 2S 515-1969 碳锰钢薄板和带材规范(退火的)(退火条件:46/59MPa)(适用于焊接) Specification for carbon-manganese steel sheet and strip (softened) (for use in the softened condition: 460/600 MPa) (suitable for welding)
BS 2S 92-1964 飞机材料规范.碳锰钢(适用于焊接)(40/55吨力/平方英寸;限定等圆断面4英寸) Specification for aircraft material - Carbon-manganese steel (suitable for welding) (40/55 tonf/sq in: limiting ruling section 4 in)
BS 2T 66-1980 19/10铬-镍耐腐蚀钢管材规范(铌稳定的:550MPa)(可焊接) Specification for 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 550 MPa) (weldable)
BS 2T 68-1980 冷拉18/10铬-镍耐腐蚀钢管材规范(铌稳定的:800MPa)(可焊接) Specification for cold drawn 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 800 MPa) (weldable)
BS 3604-2-1991 承压钢管.具有规定高温特性的铁合金钢.第2部分:纵向电弧焊接管规范 Steel pipes and tubes for pressure purposes: ferritic alloy steel with specified elevated temperature properties - Specification for longitudinally arc welded tubes
BS 3799-1974 石油工业用钢管配件、螺旋管接头和套管焊接规范 Specification for steel pipe fittings, screwed and socket-welding for the petroleum industry
BS 3T 53-1980 铬-钼钢管材规范(700MPa)(管外径不小于12.5mm)(可焊接) Specification for chromium-molybdenum steel tube (700 MPa) (outside diameter not less than 12.5 mm) (weldable)
BS 4129-1990 板材钢电阻焊用焊接底剂、焊透密封剂、粘合剂和蜡规范 Specification for welding primers and weld-through sealants, adhesives and waxes for resistance welding of sheet steel
BS 4449-2005+A2-2009 混凝土增强钢.可焊接增强钢.棒材、卷材和拆卷产品.规范 Steel for the reinforcement of concrete - Weldable reinforcing steel - Bar, coil and decoiled product - Specification
BS 4515-1-2009 陆地和近海钢管焊接规范.碳和碳锰钢管 Specification for welding ofsteel pipelines on land andoffshorePart 1: Carbon and carbon manganesesteel pipelines
BS 4515-2-1999 陆地和近海铺设的钢管焊接规范.双联法不锈钢管道 Specification for welding of steel pipelines on land and offshore - Duplex stainless steel pipelines
BS 4871-3-1985 按认可焊接工艺操作的焊工鉴定考试规范.第3部分:金属管与管板接头间电弧焊 Specification for approval testing of welders working to approved welding procedures - Arc welding of tube to tube-plate joints in metallic materials
BS 4872-1-1982 不要求批准焊接程序的焊工考试规范.第1部分:钢熔焊 Specification for approval testing of welders when welding procedure approval is not required - Fusion welding of steel
BS 4872-2-1976 不要求批准焊接工艺时焊工的鉴定考试规范.第2部分:铝及铝合金钨极惰性气体保护电弧焊或熔化极惰性气体保护 Specification for approval testing of welders when welding procedure approval is not required - TIG or MIG welding of aluminium and its alloys
BS 499-1 Supplement-1992 焊接术语与符号.补充.电焊设备的定义 Welding terms and symbols - Supplement - Definitions for electric welding equipment
BS 499-1-2009 焊接术语和符号.焊接、钎焊和热切割用术语表 Welding terms and symbolsPart 1: Glossary for welding, brazing andthermal cutting
BS 499-2C-1999 焊接术语与符号.图表形式的的欧洲电弧焊符号 Welding terms and symbols - European arc welding symbols in chart form
BS 4T 45-1972 碳-锰钢管材规格(700 N/mm<上标2>)(管外径大于或等于12.5mm)(可焊接) Specification for carbon-manganese steel tube (700 N/mm2) (tube 12.5 mm outside diameter and greater) (weldable)
BS 5950-2-2001 建筑物中结构用的钢制件.材料、制造和装配规范.轧制及焊接型材 Structural use of steelwork in building - Specification for materials, fabrication and erection - Rolled and welded sections
BS 5S 21-1964 飞机材料规范.20号碳钢(适用于焊接)(25/35吨力/平方英寸:最大直径或最小断面尺寸6英寸) Specification for aircraft material - '20' carbon steel (suitable for welding) (25/35 tonf/sq in: maximum size 6 inches diameter or minor sectional dimension)
BS 638-4-1996 电弧焊电源、设备和附件.第4部分:焊接电缆规范 Arc welding power sources, equipment and accessories - Specification for welding cables
BS 6942-2-1989 氧燃料气体焊接和相关工艺用成套小型工具的设计和建造.第2部分:使用可充氧气和燃气容器的成套工具规范 Design and construction of small kits for oxy-fuel gas welding and allied processes - Specification for kits using refillable gas containers for oxygen and fuel gas
BS 6990-1989 含有工艺流体或其残留物的钢管焊接实用规程 Code of practice for welding on steel pipes containing process fluids or their residuals
BS 7122-1989 液化气体道路运输用的焊接钢槽车规范 Specification for welded steel tanks for the road transport of liquefiable gases
BS 7363-1990 焊接用受控热强度试验和叠珠焊缝板试验方法 Method for bead-on-plate (BOP) test for welds
BS 7372-3-1993 工业金属丝筛网和金属丝编织布孔径和丝径组合选择指南.第3部分:预压接或压力焊接金属丝筛网的优选组合 Guide to the choice of aperture size and wire diameter combinations for industrial wire screens and woven wire cloth - Preferred combinations for pre-crimped or pressure-welded wire screens
BS 7448-2-1997 断裂机械韧性试验.第2部分:金属材料焊接的KDOWNIDOWNc值、临界CTOD值和临界J值的测定方法 Fracture mechanics toughness tests - Method for determination of KIc, critical CTOD and critical J values of welds in metallic materials
BS 7655-2.4-2000 电缆用绝缘和铠装材料规范.横向耦合弹性铠装化合物.焊接电缆包敷物 Specification for insulating and sheathing materials for cables - Cross-linked elastomeric sheathing compounds - Welding cable covering
BS 7670-2-1997 电阻凸焊的钢螺母和螺栓.焊接螺母和螺栓的焊接规范 Steel nuts and bolts for resistance projection welding - Specification for welding of weld nuts and weld bolts
BS 8451-2004 气焊切割和相关工艺用橡胶软管.高度耐扭结重型焊接软管(H型).规范 Rubber hoses for gas welding, cutting and allied processes - High kink-resistant heavy duty welding hose (type H) - Specification
BS 855-1990 集中供热和间接热水供应用焊接钢锅炉(额定输出44KW至3MW)规范 Specification for welded steel boilers for central heating and indirect hot water supply (rated output 44 kW to 3 MW)
BS 91-1998 电缆焊接插座.规范 Electric cable soldering sockets - Specification
BS 9210 N0009-1-1978 射频连接器(SMC系列)详细规范.不密封、焊接、静态接触、50Ω、螺纹连接.全面评定级 Detail specification for radio frequency connectors (series SMC) - Unsealed, soldered, captive contact, 50 $2I, screw coupling - Full assessment level
BS 9210 N0009-2-1978 射频连接器(SMA系列)详细规范.不密封、焊接、静态接触、50Ω、螺纹连接.控制图.配合面详图和测量数据 Detail specification for radio frequency connectors (series SMC) - Unsealed, soldered, captive contact, 50 ohms, screw coupling - Control drawings - Mating face details and gauge information
BS 9210 N001-1-1975 射频连接器(BNC型)的详细规范.50Ω的密封、焊接、静态接触.全面评定级 Detail specification for radio frequency connectors (type BNC) - Sealed, soldered, captive contact, 50 ohms - Full assessment level
BS 9210 N007-1-1976 射频连接器(SMB型)的详细规范.不密封、焊接、静态接触、50Ω、插入式连接.全面评定级 Detail specification for radio frequency connectors (type SMB) - Unsealed, soldered, captive contact, 50 $2I, snap-on couplings - Full assessment level
BS 9210 N007-2-1976 射频连接器(SMB型)的详细规范.不密封、焊接、静态接触、50Ω、连接扣.控制图.配合面详图和测量数据 Detail specification for radio frequency connectors (type SMB) - Unsealed, soldered, captive contact, 50 ohms, snap-on couplings - Control drawings - Mating face details and gauge information
BS 9612 N016-1979 振荡器用电阻焊接密封石英晶体元件用详细规范.DN、DZ、DQ和DP外壳、0.8~20MHz和3.0~30MHz频率范围.宽温范 Detail specification for resistance welded seal quartz crystal units for oscillator applications - DN, DZ, DQ and DP enclosures, 0. 8 to 20 MHz and 3.0 to 30 MHz frequency ranges - Fundamental thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled) - Full assessment level
BS 9612 N017-1979 振荡器用电阻焊接密封石英晶体元件用详细规范.DN、DZ、DQ和DP外壳、0.8~20MHz和3.0~30MHz频率范围.窄温范 Detail specification for resistance welded seal quartz crystal units for oscillator applications - DN, DZ, DQ and DP enclosures, 0. 8 to 20 MHz and 3.0 to 30 MHz frequency ranges - Fundamental thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled) - Full assessment level
BS DD CEN ISO/TS 15011-5-2006 焊接和相关工艺的卫生和安全.烟尘和气体取样的试验室方法.通过完全或部分有机材料组成的产品焊接或切割时所 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials
BS DD CEN ISO/TS 17845-2004 焊接和相关程序.缺陷的名称与符号系统 Welding and allied processes - Designation system for imperfections
BS DD CEN/TS 14751-2004 焊接.焊接检验用飞行时间衍射技术(TOFD)的使用 Welding - Use of time-of-flight diffraction technique (TOFD) for examination of welds
BS DD ENV 10080-1996 混凝土加强筋用钢.可焊肋状钢筋 B500.棒材、卷材和焊接钢筋网的交付技术状态 Steel for the reinforcement of concrete - Weldable ribbed reinforcing steel B500 - Technical delivery conditions for bars, coils and welded fabric
BS EN 10025-3-2004 结构钢热轧制品.正火/正火热机轧制的可焊接细粒结构钢的交货技术条件 Hot rolled products of structural steels - Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
BS EN 10025-4-2004 结构钢热轧制品.热机轧制的可焊接细粒结构钢的交货技术条件 Hot rolled products of structural steels - Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
BS EN 10028-6-2009 压力容器用钢制扁平产品.可焊接淬火和回火细粒钢 Flat products made of steels for pressure purposes - Part 6:Weldable fine grain steels, quenched and tempered
BS EN 10080-2005 混凝土增强用钢.可焊接增强钢.总则 Steel for the reinforcement of concrete - Weldable reinforcing steel - General
BS EN 1011-1-2009 焊接.金属材料焊接用推荐规程.弧焊用一般指南 Welding - Recommendations for welding of metallic materials - General guidance for arc welding
BS EN 1011-2-2001 焊接.金属材料焊接的推荐规范.铁素体钢的电弧焊接 Welding - Recommendations for welding of metallic materials - Arc welding of ferritic steels
BS EN 1011-3-2000 焊接.金属材料焊接的推荐规范.不锈钢的电弧焊接 Welding - Recommendations for welding of metallic materials - Arc welding of stainless steels
BS EN 1011-4-2000 焊接.金属材料焊接的推荐规范.铝及铝合金的电弧焊接 Welding - Recommendations for welding of metallic materials - Arc welding of aluminium and aluminium alloys
BS EN 1011-5-2003 焊接.金属材料焊接的推荐规程.覆层钢的焊接 Welding - Recommendations for welding of metallic materials - Welding of clad steel
BS EN 1011-6-2005 焊接.金属材料焊接的建议.第6部分:激光束焊接 Welding - Recommendations for welding of metallic materials - Part 6: Laser beam welding
BS EN 1011-7-2004 焊接.金属材料焊接的推荐规范.电子束焊 Welding - Recommendations for welding of metallic materials - Electron beam welding
BS EN 1011-8-2004 焊接.金属材料焊接的推荐规范.铸铁的焊接 Welding - Recommendations for welding of metallic materials - Welding of cast irons
BS EN 10120-2008 焊接的储气瓶用钢薄板材和带材 Steel sheet and strip for welded gas cylinders
BS EN 10217-1-2002 承压用焊接钢管.交付技术状态.规定室温特性的非合金钢管 Welded steel tubes for pressure purposes - Technical delivery conditions - Non-alloy steel tubes with specified room temperature properties
BS EN 10217-2-2002 承压用的焊接钢管.交付技术状态.规定了高温特性的非合金和合金电焊钢管 Welded steel tubes for pressure purposes - Technical delivery conditions - Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
BS EN 10217-3-2002 承压用的焊接钢管.交付技术状态.合金细晶粒钢管 Welded steel tubes for pressure purposes - Technical delivery conditions - Alloy fine grain steel tubes
BS EN 10217-4-2002 承压用的焊接钢管.交付技术状态.规定了低温特性的非合金和合金电焊钢管 Welded steel tubes for pressure purposes - Technical delivery conditions - Electric welded non-alloy steel tubes with specified low temperature properties
BS EN 10217-5-2002 承压用的焊接钢管.交付技术状态.规定了高温特性的非合金和合金埋弧焊接钢管 Welded steel tubes for pressure purposes - Technical delivery conditions - Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
BS EN 10217-6-2002 承压用的焊接钢管.交付技术条件.规定了低温特性的非合金埋弧焊接钢管 Welded steel tubes for pressure purposes - Technical delivery conditions - Submerged arc welded non-alloy steel tubes with specified low temperature properties
BS EN 10217-7-2005 压力用途焊接钢管.交货技术条件.不锈钢管 Welded steel tubes for pressure purposes - Technical delivery conditions - Stainless steel tubes
BS EN 10219-1-2006 非合金和细晶结构钢的冷成形焊接结构空心型材.交货技术要求 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Technical delivery requirements
BS EN 10219-2-2006 非合金和细晶结构钢的冷成形焊接结构空心型材.公差、尺寸和局部特性 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Tolerances, dimensions and sectional properties
BS EN 10220-2002 无缝和焊接钢管.尺寸和每单位长度的质量 Seamless and welded steel tubes - Dimensions and masses per unit length
BS EN 10222-4-1999 压力容器用钢锻件.具有高验收强度的可焊接细晶粒钢 Steel forgings for pressure purposes - Weldable fine-grain steels with high proof strength
BS EN 10223-4-1998 栅栏用钢丝和钢丝制品.钢丝焊接网式栅栏 Steel wire and wire products for fences - Steel wire welded mesh fencing
BS EN 10223-7-2002 栏栅用钢丝和金属丝制品.栏栅用钢丝焊接网板 Steel wire and wire products for fences - Steel wire welded panels - For fencing
BS EN 10225-2009 固定近海结构的可焊接结构钢.技术提交条件 Weldable structural steels for fixed offshore structures - Technical delivery conditions
BS EN 10246-1-1996 钢管的无损检验.证明液压系统密封性用无缝和焊接铁磁钢管(埋弧焊除外)的自动电磁检验 Non-destructive testing of steel tubes - Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness
BS EN 10246-11-2000 钢管的无损检验.对无缝和焊接钢管进行液体渗透试验以检测其表面缺陷 Non-destructive testing of steel tubes - Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections
BS EN 10246-12-2000 钢管的无损检验.对无缝和焊接铁磁钢管进行磁粉检验以检测其表面缺陷 Non-destructive testing of steel tubes - Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
BS EN 10246-13-2000 钢管的无损检验.无缝和焊接钢管(埋弧焊除外)的全外围自动超声波厚度检测 Non-destructive testing of steel tubes - Automatic full peripheral ultrasonic thickness testing for seamless and welded (except submerged arc welded) steel tubes
BS EN 10246-14-2000 钢管的无损检验.层状缺陷探测用无缝和焊接(埋弧焊接除外)钢管的自动超声波检验 Non-destructive testing of steel tubes - Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections
BS EN 10246-15-2000 钢管的无损检验.无缝和焊接钢管(埋弧焊除外)的全外围自动超声波厚度检测 Non-destructive testing of steel tubes - Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections
BS EN 10246-16-2000 钢管的无损检验.对焊接钢管焊缝临近区域进行自动超声波检验以检测其层状缺陷 Non-destructive testing of steel tubes - Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections
BS EN 10246-17-2000 钢管的无损检验.对无缝和焊接钢管管端部进行超声波检验以检测其层状缺陷 Non-destructive testing of steel tubes - Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections
BS EN 10246-18-2000 钢管的无损检验.对无缝和焊接铁磁钢管管端部进行磁粉检验以检测其层状缺陷 Non-destructive testing of steel tubes - Magnetic particle inspection of tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections
BS EN 10246-2-2000 钢管的无损检验.验证水密封性能用的无缝和焊接的(埋弧焊除外)奥氏体铁素体钢管的自动涡流试验 Non-destructive testing of steel tubes - Automatic eddy current testing of seamless and welded (except submerged arc welded) austenitic and austenitic-ferritic steel tubes for verification of hydraulic leak-tightness
BS EN 10246-3-2000 钢管的无损检验.缺陷探测用无缝和焊接(埋弧焊除外)钢管的自动涡流检验 Non-destructive testing of steel tubes - Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
BS EN 10246-5-2000 钢管的无损检验.纵向缺陷探测用无缝和焊接(埋弧焊除外)的铁磁性钢管的自动全周界磁力换能器/磁力线渗漏检验 Non-destructive testing of steel tubes - Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal imperfections
BS EN 10246-7-2005 钢管的无损检验.纵向缺陷探测用无缝焊接钢管(埋弧焊除外)的自动全周界超声波检验 Non-destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) tubes for the detection of longitudinal imperfections
BS EN 10246-9-2000 钢管的无损检验.检测纵向或横向缺陷用的焊接和埋弧焊钢管的自动超声波试验 Non-destructive testing of steel tubes - Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections
BS EN 10255-2004 焊接或加螺纹的非合金钢管.交货技术条件 Non-alloy steel tubes suitable for welding and threading - Technical delivery conditions
BS EN 10296-1-2003 机械和一般工程用焊接圆钢管.技术交货条件.非合金和合金钢管 Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Non-alloy and alloy steel tubes
BS EN 10296-2-2005 机械和一般工程用焊接圆钢管.技术交货条件.不锈钢 Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Stainless steel
BS EN 10305-2-2010 精密仪器用钢管.交货技术条件.焊接冷拔钢管 Steel tubes for precision applications - Technical delivery conditions - Welded cold drawn tubes
BS EN 10305-3-2010 精密仪器用钢管.交货技术条件.焊接冷精加工钢管 Steel tubes for precision applications - Technical delivery conditions - Welded cold sized tubes
BS EN 10305-5-2010 精密设备用钢管.交货技术条件.焊接和冷精加工的方形及矩形钢管 Steel tubes for precision applications - Technical delivery conditions - Welded and cold sized square and rectangular tubes
BS EN 10305-6-2005 精密仪器用钢管.交货技术条件.第6部分:液压和气动动力系统用焊接冷拉管材 Steel tubes forprecisionapplications —Technical deliveryconditions —Part 6: Welded cold drawn tubes forhydraulic and pneumatic powersystems
BS EN 10312-2003 包括人生活用水在内的水成液输送用焊接不锈钢管.交货技术条件 Welded stainless steel tubes for the conveyance of aqueous liquids inclu ding water for human consumption - Technical delivery conditions
BS EN 1043-1-1996 金属材料焊接的破坏试验.硬度试验.第1部分:电弧焊接的硬度试验 Destructive tests on welds in metallic materials - Hardness testing - Hardness test on arc welded joints
BS EN 1043-2-1997 金属材料焊接点的破坏试验.第2部分:焊接连接件的显微硬度试验 Destructive tests on welds in metallic materials - Hardness testing - Micro hardness testing on welded joints
BS EN 1123-1-1999 污水系统用插接管的纵向焊接热浸镀锌钢管及配件.要求、试验和质量控制 Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Requirements, testing, quality control
BS EN 1123-2-2006+A1-2007 废水系统用带套管和座孔的径向焊接热浸镀锌钢管的管道和配件.第2部分:尺寸 Pipes and fittings of longitudinally welded hot-dip galvanized steel tube with spigot and socket for waste water systems - Part 2: Dimensions
BS EN 1123-3-2004 污水系统用带插接套的纵向焊接热浸镀锌钢管及配件.真空排水系统以及造船用排水系统的尺寸和特殊要求 Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building
BS EN 1124-1-1999 污水系统用带套管和孔座的纵向焊接不锈钢管和配件.要求、测试和质量控制 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Requirements, testing, quality control
BS EN 1124-2-2007 废水系统用带套筒的纵向焊接不锈钢管道和配件.第2部分:S系统.尺寸 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - System S; dimensions
BS EN 1124-3-2008 污水系统用带套管和孔座的纵向焊接不锈钢管和配件.X.设备尺寸 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 3:System X. Dimensions
BS EN 1124-4-2005 污水系统用带套管和孔座的纵向焊接不锈钢管和配件.第4部分:真空排水系统和船用排水系统的部件 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems — Part 4: Components for vacuum drainage systems and for drainage systems on ships
BS EN 12074-2000 焊接用料.焊接和相关工艺用消耗品的生产、供应和配送质量要求 Welding consumables - Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes
BS EN 12493-2008 液化石油气(LPG)设备和附件.LPG用焊接钢罐.油槽汽车的设计和制造 (LPG) —Road tankers designand manufacture
BS EN 12517-1-2006 焊缝的无损检验.用放射线照相术评定钢、镍、钛及其合金的焊接接缝.验收等级 Non-destructive testing of welds - Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography - Acceptance levels
BS EN 12517-2-2008 焊缝的无损检验.通过射线照相术评估铝及铝合金的焊接接头.验收等级 Non-destructive testing of welds - Part 2: Evaluation of welded joints in aluminium and its alloys by radiography - Acceptance levels
BS EN 12542-2002 安装在地面上的储存容量不超过13M<上标3>的成系列生产的液化石油气储存用固定焊接圆柱形气罐.设计与制造 Static welded cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) having a volume not greater than 13 m3 and for installation above ground - Design and manufacture
BS EN 1256-2006 气焊设备.焊接、切割和相关工艺用软管组件规范 Gas welding equipment - Specification for hose assemblies for equipment for welding, cutting and allied processes
BS EN 12573-1-2000 焊接非静压热塑罐.一般原理 Welded static non-pressurized thermoplastic tanks - General principles
BS EN 12573-2-2000 焊接非静压热塑罐.立式圆柱形罐的计算 Welded static non-pressurized thermoplastic tanks - Calculation of vertical cylindrical tanks
BS EN 12573-3-2000 焊接非静压热塑罐.单层矩形罐的设计和计算 Welded static non-pressurized thermoplastic tanks - Design and calculation for single skin rectangular tanks
BS EN 12573-4-2000 焊接非静压热塑罐.法兰接头的设计和计算 Welded static non-pressurized thermoplastic tanks - Design and calculation of flanged joints
BS EN 12627-1999 工业阀门.钢阀门的对接焊接端 Industrial valves - Butt welding ends for steel valves
BS EN 12732-2000 供气系统.焊接钢管.功能要求 Gas supply systems - Welding steel pipework - Functional requirements
BS EN 12760-1999 阀门.钢阀门的套节焊接端 Valves - Socket welding ends for steel valves
BS EN 12797-2000 铜焊.铜焊接头破坏试验 Brazing - Destructive tests of brazed joints
BS EN 12799-2000 铜焊.铜焊接头无损检验 Brazing - Non-destructive examination of brazed joints
BS EN 12814-1-2000 热塑性半成品焊接接头试验.弯曲试验 Testing of welded joints of thermoplastics semi-finished products - Bend test
BS EN 12814-2-2000 热塑半成品焊接接头试验.拉伸试验 Testing of welded joints of thermoplastics semi-finished products - Tensile test
BS EN 12814-3-2000 热塑半成品焊接接头试验.拉伸蠕变试验 Testing of welded joints of thermoplastics semi-finished products - Tensile creep test
BS EN 12814-4-2001 热塑半成品焊接接头试验.剥离试验 Testing of welded joints of thermoplastics semi-finished products - Peel test
BS EN 12814-5-2000 热塑半成品焊接接头试验.宏观检查 Testing of welded joints of thermoplastics semi-finished products - Macroscopic examination
BS EN 12814-6-2000 热塑半成品焊接接头试验.低温拉伸试验 Testing of welded joints of thermoplastics semi-finished products - Low temperature tensile test
BS EN 12814-7-2002 热塑性半成品的焊接接头的试验.腰形试验样品的拉伸试验 Testing of welded joints of thermoplastics semi-finished products - Tensile test with waisted test specimens
BS EN 12814-8-2001 热塑半成品焊接接头试验.要求 Testing of welded joints of thermoplastic semi-finished products -. Requirements
BS EN 12862-2000 可运输气瓶.可反复灌装可运输焊接铝合金气瓶的设计和制造规范 Transportable gas cylinders - Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders
BS EN 13067-2003 塑料焊接人员.焊工的资格检验.热塑塑料焊接组件 Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies
BS EN 13100-1-2000 热塑性半成品焊接接头无损检验.目视检查 Non destructive testing of welded joints of thermoplastics semi-finished products - Visual examination
BS EN 13100-2-2004 热塑性半成品焊接接头的无损检验.X射线照相检验 Non destrictive testing of welded joints of thermoplastics semi-finished products - X-ray radiographic testing
BS EN 13100-3-2004 热塑性半成品焊接接头的无损检验.超声检验 Non-destructive testing of welded joints in thermoplastics semi-finished products - Ultrasonic testing
BS EN 13110-2002 液化石油气用可运输、可再充气的焊接铝瓶.设计和制造 Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction
BS EN 1320-1997 金属材料焊接点的破坏试验.断裂试验 Destructive tests on welds in metallic materials - Fracture tests
BS EN 1321-1997 金属材料焊接点的破坏试验.焊接点的宏观和微观检验 Destructive test on welds in metallic materials - Macroscopic and microscopic examination of welds
BS EN 1326-1996 气焊设备.气体硬钎焊和焊接用小型设备箱 Gas welding equipment - Small kits for gas brazing and welding
BS EN 1327-1996 气焊设备.焊接和类似工艺用热固性软管 Gas welding equipment - Thermoplastic hoses for welding and allied processes
BS EN 13322-1-2003+A1-2006 可运输的气瓶.可再充填的焊接钢瓶.设计和制造.碳钢 Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Carbon steel
BS EN 13322-2-2003 可运输的气瓶.可再充填的焊接钢瓶.设计和制造.不锈钢 Transportable gascylinders — Refillablewelded steel gascylinders — Design andconstruction —Part 2: Stainless steel
BS EN 13347-2002 铜和铜合金.焊接和钎焊用杆材和线材 Copper and copper alloys - Rod and wire for welding and braze welding
BS EN 13479-2004 焊接消耗品.金属材料熔焊用填充金属和焊剂的一般产品标准 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
BS EN 13622-2002 气体焊接设备.术语.气体焊接使用的术语 Gas welding equipment - Terminology - Terms used for gas welding equipment
BS EN 13705-2004 热塑焊接.热气焊机械和设备(包括挤焊) Welding of thermoplastics - Machines and equipment for hot gas welding (including extrusion welding)
BS EN 14015-2005 在室温和高于室温下液体储存用现场建造的立式、圆柱形、平底、地上用焊接钢罐的设计和制造规范 Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above
BS EN 14075-2002 地下设备用和石油液化气储气容量不大于13 mUP3的静止焊接系列园柱型钢罐.设计和制造 Static welded steel cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) having a volume not greater than 13 m3 and for installation underground - Design and manufacture
BS EN 14140-2003 液化石油气(LPG)用可移动可重填焊接钢瓶.备选方案设计和建造 Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) - Alternative design and construction
BS EN 14163-2001 石油和天然气工业.管道运输系统.管道焊接 Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines
BS EN 1418-1998 焊接操作人员.金属材料全机械化焊接和自动焊接用的熔焊和电阻焊定位器的焊接操作人员的批准试验 Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials
BS EN 14208-2004 可移动式储气瓶.气体运输用容量最高达1000升的焊接的压力桶规范.设计和建造 Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction
BS EN 14286-2008 铝和铝合金.危险品的存储和运输槽罐用可焊接轧制产品 Aluminium andaluminium alloys— Weldable rolledproducts for tanksfor the storage andtransportation ofdangerous goods
BS EN 14324-2004 铜焊.铜焊接合的应用指南 Brazing - Guidance on the application of brazed joints
BS EN 1435-1997 焊缝的无损检验.焊接接头的放射性检验 Non-destructive examination of welds - Radiographic examination of welded joints
BS EN 1442-2006+A1-2008 液化石油气(LPG)设备和附件.LPG用可运输、再填充焊接钢瓶.设计和结构 LPG equipment andaccessories —Transportablerefillable welded steelcylinders for LPG —Design andconstruction
BS EN 14532-1-2004 焊接消耗品.试验方法和质量要求.钢、镍和镍合金消耗品的基本方法和合格评定 Welding consumables - Test methods and quality requirements - Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys
BS EN 14532-2-2004 焊接消耗品.试验方法和质量要求.钢、镍和镍合金耗材的补充方法和合格评定 Welding consumables - Test methods and quality requirements - Supplementary mekthods and conformity assessment of consumables for steel, nickel and nickel alloys
BS EN 14532-3-2005 焊接消耗品.试验方法和质量要求.铝合金焊接用焊丝电极、焊丝和焊棒的合格评定 Welding consumables - Test methods and quality requirements - Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys
BS EN 14587-2-2009 铁路设施.轨道.铁轨的闪光对焊.第2部分:在除固定车间外的场所使用移动式电焊机焊接的新型R220,R260,R260Mn Railway applications - Track - Flash butt welding of rails - Part 2: New R220, R260, R260Mn andR350HT grade rails by mobile weldingmachines at sites other than a fixedplant
BS EN 14610-2004 焊接和相关工艺.金属焊接工艺的定义 Welding and allied processes - Definitions of metal welding processes
BS EN 14638-1-2006 可运输的气瓶.容量<150升的可再充气焊接插座.用实验方法证明设计制成的焊接奥氏体不锈钢气瓶 Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Welded austenitic stainless steel cylinders made to a design justified by experimental methods
BS EN 14700-2005 焊接消耗品.镀硬面法用焊接消耗品 Welding consumables - Welding consumables for hard-facing
BS EN 14717-2005 焊接和相关工艺.环境检查表 Welding and allied processes - Environmental check list
BS EN 14728-2005 热塑焊接中的缺陷.分类 Imperfections in thermoplastic welds - Classification
BS EN 14730-1-2006 道路设施.轨道.铁轨的铝热剂焊接.焊接过程的验收 Railway applications - Track - Aluminothermic welding of rails - Approval of welding processes
BS EN 14730-2-2006 道路设施.轨道.铁轨的铝热剂焊接.铝热焊接工资格、合同认可和焊缝的验收 Railway applications - Track - Aluminothermic welding of rails - Qualifications of aluminothermic welders, approval of contractors and acceptance of welds
BS EN 14876-2007 可运输储气瓶.定期检验和焊接钢压力桶试验 Transportable gas cylinders - Periodic inspection and testing of welded steel pressure drums
BS EN 14893-2006 液化石油气设备和附件.容量为150升~1000升可运输液化石油气(LPG)的焊接钢压力桶 LPG equipment and accessories - Transportable liquefied petroleum gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1000 litres
BS EN 14913-2005 液化石油气(LPG)设备和附件.液化石油气(LPG)用可移动可再装填焊接钢瓶.替代方案设计和制造.装填前、中、后 LPG equipment and accessories - Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) - Alternative design and construction - Procedure for checking before, during and after filling
BS EN 14914-2005 液化石油气(LPG)设备和附件.液化石油气(LPG)用可移动可再装填焊接钢瓶.替代方案设计和制造.周期性检验 LPG equipment and accessories - Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) - Alternative design and construction - Periodic inspection
BS EN 15085-1-2007 铁路设施.铁路车辆和部件的焊接法.总则 Railway applications - Welding of railway vehicles and components - General
BS EN 15085-2-2007 铁路设施.铁路车辆和组件的焊接.焊接厂商的质量要求和合格证 Railway applications - Welding of railway vehicles and components - Quality requirements and certification of welding manufacturer
BS EN 15085-3-2007 铁路设施.铁路车辆和组件的焊接.设计要求 Railway applications - Welding of railway vehicles and components - Design requirements
BS EN 15085-4-2007 铁路设施.铁路车辆和组件的焊接.生产要求 Railway applications - Welding of railway vehicles and components - Production requirements
BS EN 15085-5-2007 铁路设施.铁路车辆和组件的焊接.检验、测试和文献 Railway applications - Welding of railway vehicles and components - Inspection, testing and documentation
BS EN 15385-2007 包装.柔性叠层管.测定头部焊接强度的试验方法 Packaging - Flexible laminate tubes - Test methods to determine the strength of the head welding
BS EN 15594-2009 铁路设施.轨道,铁轨的电弧焊接修复 Railway applications - Track - Restoration of rails by electric arc welding
BS EN 15617-2009 焊接接头的无损检验.飞行时间衍射技术(TOFD).接受等级 Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels
BS EN 1598-1998 焊接和类似工艺的卫生和安全.电弧焊工艺用透明焊接屏板,屏带和遮光罩 Health and safety in welding and allied processes - Transparent welding curtains, strips and screens for arc welding processes
BS EN 1600-1997 焊接用料.不锈钢和耐热钢手工金属弧焊用的涂覆电极.分类 Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat resisting steels - Classification
BS EN 169-2002 眼睛保护.焊接和有关工艺用的滤波镜.透射率要求和推荐使用方法 Personal eye-protection - Filters for welding and related techniques - Transmittance requirements and recommended use
BS EN 1708-1-2010 焊接.钢件基本焊接连接部件.受压的组件 Welding - Basic welded joint details in steel - Pressurized components
BS EN 1708-2-2000 焊接.钢焊接时的基本连接件.无内压组件 Welding - Basic weld joint details in steel - Non-internal pressurized components
BS EN 1711-2000 焊接的无损检验.通过综合平面分析检验焊接的边缘电流 Non-destructive examination of welds - Eddy current examination of welds by complex plane analysis
BS EN 1712-1997 焊接无损检验.焊点超声检测.验收水平 Non-destructive examination of welds - Ultrasonic examination of welded joints - Acceptance levels
BS EN 1715-3-2008 铝和铝合金.拉制坯料.机械用途(不包括焊接)特殊要求 Aluminium and aluminium alloys - Drawing stock - Part 3:Specific requirements for mechanical uses (excluding welding)
BS EN 1715-4-2008 铝和铝合金.线坯.第4部分:焊接应用的特殊要求 Aluminium and aluminium alloys - Drawing stock - Part 4:Specific requirements for welding applications
BS EN 175-1997 个人防护.焊接和相关工艺中眼睛和面部的防护设备 Personal protection - Equipment for eye and face protection during welding and allied processes
BS EN 1778-2000 焊接热塑结构特征值.热塑设备的设计模和允许应力测定 Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastics equipment
BS EN 1792-2003 焊接.焊接和相关工艺术语的多语种对照表 Welding - Multilingual list of terms for welding and related processes
BS EN 1803-2002 可运输储气瓶.焊接炭素钢储气瓶的周期性检验和测试 Transportable gas cylinders - Periodic inspection and testing of welded carbon steel gas cylinders
BS EN 22553-1995 焊接、铜焊和软钎焊连接件.制图符号标注 Welded, brazed and soldered joints - Symbolic representation on drawings
BS EN 2574-1990 焊接规范.图纸上的数据 Specification for welds - Information on drawings
BS EN 2591-514-2002 电气和光学连接元件.试验方法.自带焊料和助熔剂的焊接点的可焊接性 Elements of electrical and optical connection - Test methods - Solderability of contacts with self-contained solder and flux
BS EN 2656-2001 航空航天系列.管连接件.焊接的连接件端头.几何布局 Aerospace series - Pipe coupling - Coupling end, welded - Geometric configuration
BS EN 288-9-1999 金属材料焊接程序的规范和批准.传输管道的陆地和海岸现场对焊管道的焊接程序试验 Specification and approval of welding procedures for metallic materials - Welding procedure test for pipeline welding on land and offshore site butt welding of transmission pipelines
BS EN 2997-007-2006 航空航天系列.连续工作温度为-65℃~175℃、持续到200℃、极端温度为260℃时耐火或不耐火的由螺纹环连接的 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Hermetic receptacle with round flange attached by welding or brazing - Product standard
BS EN 3081-2001 航空航天系列.钛合金管连接件8°30'.带动梁密封端头的修理用焊接箍 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Ferrules welded, with dynamic beam seal end, for repair
BS EN 3082-2001 航空航天系列.钛合金管连接件8°30'.修理用闷头焊接活接头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead welded, for repair
BS EN 3083-2001 航空航天系列.钛合金管连接件8°30'.修理用闷头长焊接端头活接头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead, long welded end, for repair
BS EN 3084-2001 航空航天系列.钛合金管连接件8°30'.修理用焊接端头螺纹活接头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, welded end threaded for repair
BS EN 3155-012-2006 航空航天系列.用于连接部件的电连接器.R级、焊接、D型、尺寸8、三轴插头电连接器.产品标准 Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, triaxial, size 8, male, type D, solder, class R. Product standard
BS EN 3155-013-2006 航空航天系列.用于连接元件的电触点.R级、焊接、D型、尺寸为8的插座三轴电触点.产品标准 Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, triaxial, size 8, female, type D, solder, class R. Product standard
BS EN 3155-039-2007 航空航天系列.用于连接部件的电触点.R级、焊接、D型、阴性、尺寸16、同轴电触点产品标准 Aerospace series —Electrical contacts usedin elements ofconnection —Part 039: Contacts, electrical, coaxial,size 16, female, type D, solder, class R —Product standard
BS EN 3155-040-2007 航空航天系列.用于连接部件的电触点.R级、焊接、D型、阳性、尺寸12、同轴电触点产品标准 Aerospace series —Electrical contacts usedin elements ofconnection —Part 040: Contacts, electrical, coaxial,size 12, male, type D, solder, class R —Product standard
BS EN 3155-041-2007 航空航天系列.用于连接部件的电触点.R级、焊接、D型、阴性、尺寸12、同轴电触点产品标准 Aerospace series —Electrical contacts usedin elements ofconnection —Part 041: Contacts, electrical, coaxial,size 12, female, type D, solder, class R —Product standard
BS EN 3155-042-2006 航空航天系列.连接部件用电触点.P级、焊接、D型、042插头、尺寸为08的三轴电触点.产品标准 Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, triaxial, size 08, male 042, type D, solder, class P. Product standard
BS EN 3155-043-2006 航空航天系列.连接部件中用电连接器.第043部分:P级、焊接、D型、043插座、尺寸08mm三轴电连接器.产品标准 Aerospace series - Electrical contacts used in elements of connection - Part 043: Contacts, electrical, triaxial, size 08, female 043, type D, solder, class P - Product standard
BS EN 3155-058-2006 航空航天系列.用于连接部件的电接触器.R级、焊接、D型、尺寸为16、同轴电接触器插头的产品标准 Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, coaxial, size 16, male, type D, solder, class R. Product standard
BS EN 3155-061-2006 航空航天系列.连接元件用电连接器.R级、焊接、D型、插座、尺寸12、屏蔽、同轴、电连接器.产品标准 Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, coaxial, shielded, size 12, female, type D, solder, class R. Product standard
BS EN 3155-067-2009 航空航天系列.连接元件用电连接器.R级焊接D型尺寸为8的同轴插头电连接器产品标准 Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, coaxial, size 08, male, type D, solder, class R. Product standard
BS EN 3155-068-2009 航空航天系列.连接元件中使用的电触点.R级、D型、尺寸为08的焊接插头同轴电气触点产品标准 Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, coaxial, size 08, female, type D, solder, class R. Product standard
BS EN 3155-069-2009 航空航天系列.连接元件用电连接器.P级焊接D型尺寸为16的同轴插座电连接器产品标准 Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, coaxial, size 16, female, type D, solder, class P. Product standard
BS EN 3218-005-2006 航空航天系列.带金属壳和螺钉锁紧的矩形连接器.带非移动式尺寸为22的焊接触点的插头.产品标准 Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Plug with non-removable size 22 solder contacts - Product standard
BS EN 3218-006-2006 航空航天系列.金属壳和螺钉锁紧的矩形连接器.带非抽取式尺寸为22焊接连接器的插座.产品标准 Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Receptacle with non-removable size 22 solder contacts - Product standard
BS EN 3243-2001 航空航天系列.钛合金8°30'管连接件.带动力横梁密封端头的焊接环箍 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Ferrule, welded, with dynamic beam seal end
BS EN 3247-2001 航空航天系列.钛合金8°30'管连接件.闷头焊接端活接头、 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead welded end
BS EN 3272-2001 航空航天系列.8°30'钛合金管连接件.动态横梁密封端头的焊接箍.几何配置 Aerospace series - Pipe coupling 8 °30' - Dynamic beam seal end for ferrule, welded - Geometric configuration
BS EN 3372-005-2007 航空航天系列.工作温度在-65℃~175℃或连续工作温度为200℃、带卡口连接的、防碰擦、中和高接触密度、圆形 Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Receptacle, hermetic, round flange, solder mounting - Product standard
BS EN 3475-509-2002 航空航天系列.飞行器用电缆.试验方法.可焊接性 Aerospace series - Cables, electrical, aircraft use - Test methods - Solderability
BS EN 3561-2001 航空航天系列.钛合金管连接件8°30'.在管端焊接和变径的带动力横梁密封端头的环箍 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Ferrules with dynamic beam seal end, welded and reduced at pipe end
BS EN 3635-2008 航空航天系列.焊接边缘.几何构造 Aerospace series - Weld lip - Geometrical configuration
BS EN 3646-007-2006 航空航天系列.连续工作温度为175℃或200℃、圆形卡口耦合的电连接器.定位焊接或铜焊安装的圆形法兰密封插座 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Receptacle, hermetic, round flange, welding or brazing mounting - Product standard
BS EN 3688-2001 航空航天系列.焊接管用钛合金制T环形填充物.14000kPa公称压力 Aerospace series - T-ring fillers in titanium alloy for welded pipes - 14000 kPa nominal pressure
BS EN 3689-2001 航空航天系列.焊接管用钛合金制T环形填充物.28000kPa公称压力 Aerospace series - T-ring fillers in titanium alloy for welding pipes - 28000 kPa nominal pressure
BS EN 3691-2001 航空航天系列.钛合金8°30'管连接件.长焊接的闷头活接头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead, long welded
BS EN 3716-004-2006 航空航天系列.数字数据传输用三级接口的单路连接器.焊接插头.产品标准 Aerospace series - Connectors, single-way with triaxial interface, for transmission of digital data - Solder plug - Product standard
BS EN 379-2003+A1-2009 个人护眼装置.自动焊接滤光镜 Personal eye-protection - Automatic welding filters
BS EN 3852-2002 航空航天系列.TI-P64001型钛合金制、球形、60度管连接器.直螺纹式焊接接头 Aerospace series - Pipe couplings, 60 °, spherical, in titanium alloy TI-P64001 - Straight unions, welded, threaded
BS EN 3854-2002 航空航天系列.TI-P64001型钛合金制、球形、60度管连接器.焊接箍 Aerospace series - Pipe couplings, 60 °, spherical, in titanium alloy TI-P64001 - Ferrules, welded
BS EN 3857-2002 航空航天系列.TI-P64001型钛合金制、球形、60度管连接器.焊接90度弯头 Aerospace series - Pipe couplings, 60 °, spherical, in titanium alloy TI-P64001 - Elbows 90 °, welded
BS EN 3868-2005 航空航天系列.管连接件、松套法兰和密封件.钛合金TI-P64001焊接法兰连接件 Aerospace series - Pipe couplings, loose flanges and seals - Flange connectors, welded, in titanium alloy TI-P64001
BS EN 3882-2001 航空航天系列.耐热合金NI-WH1801(NiCr20Co18Ti3Al2).焊接用填充金属丝 Aerospace series - Heat resisting alloy NI-WH1801 (NiCr20Co18Ti3Al2) - Filler wire for welding
BS EN 3883-2001 航空航天系列.耐热合金NI-WH2301(NiCr22Fe19Mo9Co2).焊接用填充金属 Aerospace series - Heat resisting alloy NI-WH2301 (NiCr22Fe19Mo9Co2) - Filler metal for welding
BS EN 3884-2001 航空航天系列.耐热合金NI-WH2601(NiCr19Nb5Mo3Ti).焊接用填充金属 Aerospace series - Heat resisting alloy NI-WH2601 (NiCr19Nb5Mo3Ti) - Filler metal for welding
BS EN 3885-2001 航空航天系列.耐热合金NI-WH3601(NiCr22Mo9Nb4).焊接用填充金属 Aerospace series - Heat resisting alloy NI-WH3601 (NiCr22Mo9Nb4) - Filler metal for welding
BS EN 3886-2001 航空航天系列.耐热合金NI-WH1303(NiCo20Cr20Mo5Ti2Al).焊接用填充金属 Aerospace series - Heat resisting alloy NI-WH1303 (NiCo20Cr20Mo5Ti2Al) - Filler metal for welding
BS EN 3887-2001 航空航天系列.耐热合金钢CO-WH4101(CoCr20W15Ni).焊接填充金属 Aerospace series - Heat resisting alloy CO-WH4101 (CoCr20W15Ni) - Filler metal for welding
BS EN 3888-2001 航空航天系列.耐热合金CO-WH1402(CoCr22Ni22W15).焊接用填充金属 Aerospace series - Heat resisting alloy CO-WH1402 (CoCr22Ni22W15) - Filler metal for welding
BS EN 3889-2002 航空航天系列.FE-WM3801(X5CrNiCu17-4)钢.焊接用填充金属 Aerospace series - Steel FE-WM3801 (X5CrNiCu17-4) - Filler metal for welding
BS EN 3890-2002 航空航天系列.钢FE-WM1502(X11CrNiMoVN12-3).焊接用填充金属 Aerospace series - Steel FE-WM1502 (X11CrNiMoVN12-3) - Filler metal for welding
BS EN 3892-2001 航空航天系列.钛合金TI-W64001.焊接填充金属 Aerospace series - Titanium alloy TI-W64001 - Filler metal for welding
BS EN 3893-2001 航空航天系列.钛合金TI-W19001.焊接用填充金属 Aerospace series - Titanium alloy TI-W19001 - Filler metal for welding
BS EN 3894-2001 航空航天系列.耐热合金NI-WD3201(NiMo25Fe6Cr5).焊接填充金属 Aerospace series - Heat resisting alloy NI-WD3201 (NiMo25Fe6Cr5) - Filler metal for welding
BS EN 3895-2001 航空航天系列,耐热合金NI-WH3901(NiCr16Mo15).焊接填充金属 Aerospace series - Heat resisting alloy NI-WH3901 (NiCr16Mo15) - Filler metal for welding
BS EN 3896-2002 航空航天系列.钢FE-WM1501(X13CrNiMoCo12-3-2-2).焊接用填充金属 Aerospace series - Steel FE-WM1501 (X13CrNiMoCo12-3-2-2. Filler metal for welding
BS EN 3897-2002 航空航天系列.钢FE-WA4801(X6CrNiMnNb18-10).焊接用填充金属 Aerospace series - Steel FE-WA4801 (X6CrNiMnNb18-10) - Filler metal for welding
BS EN 4019-2001 航空航天系列.钛合金管连接件8°30'.焊接的90°弯头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 90 °, welded
BS EN 4020-2009 航空航天系列.钛合金管连接 8°30'.带推进线螺母焊接端90°弯头 Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 90°, welded end with thrust wire nut
BS EN 4022-2001 航空航天系列.钛合金管连接件8°30'.闷头、90°弯头焊接端头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 90 °, bulkhead, welded end
BS EN 4024-2009 航空航天系列.钛合金管连接8°30'.带推进线螺母的45°弯头焊接端 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 45 ° welded end with thrust wire nut
BS EN 4031-2001 航空航天系列.钛合金管连接件8°30'.焊接活接头用螺母 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Nut for welded union
BS EN 4058-2001 航空航天系列.钛和钛合金制的焊接用填充杆材和填充金属丝.直径为0.5mm 5.0mm.尺寸 Aerospace series - Filler rods and filler wires for welding in titanium and titanium alloys - Diameter 0,5 mm D 5,0 mm - Dimensions
BS EN 4059-2001 航空航天系列.钢焊接填充线和填充棒.直径0.5mm和5.0mm.尺寸 Aerospace series - Filler rods and filler wire for welding in steel - Diameter 0,5 mm D 5,0 mm - Dimensions
BS EN 4060-2001 航空航天系列.钛和钛合金制的焊接用填充杆材和填充金属丝.直径为0.5mm 5.0mm.尺寸 Aerospace series - Filler rods and filler wires for welding in heat resisting alloys - Diameter 0,5 mm D 5,0 mm - Dimensions
BS EN 4183-2001 航空航天系列.钛合金管连接件8°30'.90°弯头焊接端头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 90 ° welded ends
BS EN 4184-2001 航空航天系列.钛合金管连接件8°30'.45°弯头双焊接端头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 45 ° double, welded ends
BS EN 4188-2001 航空航天系列.钛合金管连接件8°30'.90°弯头长闷头焊接端头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 90 ° bulkhead, long, welded end
BS EN 4233-2001 航空航天系列.钛合金管连接件8°30'.带螺纹的焊接活接头 Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, welded, threaded
BS EN 4324-2002 航空航天系列.AL-W42201铝合金.焊接用填充金属.焊条 Aerospace series - Aluminium alloy AL-W42201 - Filler metal for welding - Rod
BS EN 4325-2001 航空航天系列.耐热合金NI-WH1302(NiCr20Co13Mo4Ti3Ai).焊接填充金属.金属丝和焊条 Aerospace series - Heat resisting alloy NI-WH1302 (NiCr20Co13Mo4Ti3AI) - Filler metal for welding - Wire and rod
BS EN 4328-2002 航空航天系列.FE-WM1601钢 (X18CrWNi13-3-2).焊接用填充金属.焊丝和焊条 Aerospace series - Steel FE-WM1601 (X18CrWNi13-3-2) - Filler metal for welding - Wire and rod
BS EN 4329-2001 航空航天系列.耐热合金NI-WH0001(NiCr20).焊接填充金属.金属丝和焊条 Aerospace series - Heat resisting alloy NI-WH0001 (NiCr20) - Filler metal for welding - Wire and rod
BS EN 4330-2002 航空航天系列.FE-WA4802钢 (X8CrNiMn27-22-2).焊接用填充金属.焊丝和焊条 Aerospace series - Steel FE-WA4802 (X8CrNiMn27-22-2) - Filler metal for welding - Wire and rod
BS EN 4331-2002 航空航天系列.FE-WL1804钢 (25CrMnMo4-2-2).焊接用填充金属.焊丝和焊条 Aerospace series - Steel FE-WL1804 (25CrMnMo4-2-2) - Filler metal for welding - Wire and rod
BS EN 4332-2002 航空航天系列.FE-WL1805钢 (8CrMnMo12-4-9). 焊接用填充金属.焊丝和焊条 Aerospace series - Steel FE-WL1805 (8CrMnMo12-4-9) - Filler metal for welding - Wire and rod
BS EN 4333-2002 航空航天系列.FE-WA4902钢 (X5CrNiCoMoWMn21-20-20-3-3-2). 焊接用填充金属.焊丝和焊条 Aerospace series - Steel FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2) - Filler metal for welding - Wire and rod
BS EN 4334-2002 航空航天系列.FE-WL1806钢 (15CrMnMoV5-4-9-3). 焊接用填充金属.焊丝和焊条 Aerospace series - Steel FE-WL1806 (15CrMnMoV5-4-9-3) - Filler metal for welding - Wire and rod
BS EN 4335-2002 航空航天系列.FE-WA2602钢 (X4NiCrTiMoV26-15). 焊接用填充金属.焊丝和焊条 Aerospace series - Steel FE-WA2602 (X4NiCrTiMoV26-15) - Filler metal for welding - Wire and rod
BS EN 4336-2002 航空航天系列.FE-WA3801钢 (X4CrNiMn20-10-2). 焊接用填充金属.焊丝和焊条 Aerospace series - Steel FE-WA3801 (X4CrNiMn20-10-2) - Filler metal for welding - Wire and rod
BS EN 4340-2002 航空航天系列.MG-W68001镁合金钢. 焊接用填充金属.焊丝和焊条 Aerospace series - Magnesium alloy MG-W68001 - Filler metal for welding - Wire and rod
BS EN 4341-2001 航空航天系列.铝合金AL-W46431.焊接填充金属.金属丝和焊条 Aerospace series - Aluminium alloy AL-W46431 - Filler metal for welding - Wire and rod
BS EN 4342-2001 航空航天系列.钛Ti-W99001.焊接填充金属.金属丝和焊条 Aerospace series - Titanium TI-W99001 - Filler metal for welding - Wire and rod
BS EN 4343-2002 航空航天系列.FE-WM1001 ( X13Cr12 )钢. 焊接用填充金属.焊丝和焊条 Aerospace series - Steel FE-WM1001 (X13Cr12) - Filler metal for welding - Wire and rod
BS EN 4549-2003 航空航天系列.耐热钢或耐热镍合金管连接件.焊接连接端.设计造型.英制 Aerospace series - Pipe coupling, in heat resisting steel or in heat resisting nickel alloy - Coupling end, welded - Design configuration - Inch series
BS EN 4552-2003 航空航天系列.耐热钢制球面37 管联接器.端部焊接的直管接头.英制 Aerospace series - Pipe coupling 37 °, spherical, in heat resisting steel - Straight nipples, welded end - Inch series
BS EN 4553-2003 航空航天系列.耐热钢制球面37 管联接器.端部焊接的90 弯头管接头.英制 Aerospace series - Pipe coupling 37 °, spherical, in heat resisting steel - Elbow 90 ° nipples, welded end - Inch series
BS EN 4555-2003 航空航天系列.耐热钢制37 管联接器.端部焊接的金属箍.英制 Aerospace series - Pipe coupling 37 °, in heat resisting steel - Ferrules, welded end - Inch series
BS EN 4557-2003 航空航天系列.耐热钢制球面37 管联接器.端部焊接的T形管接头.英制 Aerospace series - Pipe coupling 37 °, spherical, in heat resisting steel - Tees nipples, welded end - Inch series
BS EN 4561-2003 航空航天系列.耐热钢制焊接管联接器.90 弯头.英制 Aerospace series - Pipe coupling, welded, in heat resisting steel - Elbow 90 °. Inch series
BS EN 4562-2003 航空航天系列.耐热钢制焊接管联接器.变径管.英制 Aerospace series - Pipe coupling, welded, in heat resisting steel - Reductors - Inch series
BS EN 4563-2003 航空航天系列.耐热钢制焊接管联接器.三通管.英制 Aerospace series - Pipe coupling, welded, in heat resisting steel - Tees - Inch series
BS EN 4632-001-2008 航空航天系列.航空航天结构用焊接及铜焊组件.材料的可焊接性和可铜焊接性的一般要求 Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - General requirements
BS EN 4632-002-2008 航空航天系列.航空航天结构用焊接及铜焊组件.材料的可焊接性和可铜焊接性.均质铝及铝合金组件 Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 002: Homogeneous assembliesaluminium and aluminium alloys
BS EN 4632-005-2009 航空航天系列.航空航天结构用材料的可焊接性和可铜焊性.耐热Ni 或Co基合金的类似组件 Aerospace series - Weldability and brazeability of materials in aerospace constructions - Homogeneous assemblies of heat resisting Ni or Co base alloys
BS EN 50069-1991+A1-1993 充气式高压开关装置和控制器用铸造和锻造铝合金的焊接复合封闭物用规范 Specification for welded composite enclosures of cast and wrought aluminium alloys for gas-filled high- voltage switchgear and controlgear
BS EN 50445-2008 能够证明符合人体暴露于(0HZ-300GHZ)电磁场基本限制的电阻焊接、电弧焊及其相关工艺设备的产品系列标准 Product family standard to demonstrate compliance of equipment for resistance welding, arc welding and allied processes with the basic restrictions related to human exposure to electromagnetic fields (0 Hz - 300 GHz)
BS EN 560-2005 气焊设备.焊接、切割和相关工艺用设备的软管连接件 Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes
BS EN 561-2002 气焊设备.焊接、切割和类似加工工艺用断路阀门快速连接器 Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes
BS EN 60068-2-58-2004 环境试验.试验.试验Td.表面安装设备(SMD)的可焊性、耐金属化溶融和耐焊接热试验方法 Environmental testing - Tests - Test Td - Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
BS EN 60317-19-1996 特种绕组线规范.涂覆聚酰胺的可焊接聚氨基甲酸乙酯漆包圆铜线.130级 Specifications for particular types of winding wires - Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 130
BS EN 60317-2-1993 特种绕组线规范.130级带粘合层的可焊接聚氨酯漆包圆铜线 Specifications for particular types of winding wires - Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer
BS EN 60317-20-1993 特种绕线规范.155级可焊接聚氨酯漆包圆铜线 Specifications for particular types of winding wires - Solderable polyurethane enamelled round copper wire, class 155
BS EN 60317-23-1993 特种绕线规范.180级可焊接聚酰胺酯漆包圆铜线 Specifications for particular types of winding wires - Solderable polyesterimide enamelled round copper wire, class 180
BS EN 60317-35-1993 特种绕线规范.155级带粘结层的可焊接聚氨酯漆包圆铜线 Specifications for particular types of winding wires - Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer
BS EN 60317-36-1993 特种绕组线规范.180级带粘结层的可焊接聚酰胺酯漆包圆铜线 Specifications for particular types of winding wires - Solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer
BS EN 60317-4-1993 特种绕线规范.130级可焊接聚氨酯漆包圆铜线 Specifications for particular types of winding wires - Solderable polyurethane enamelled round copper wire, class 130
BS EN 60317-51-2001 特种绕组线规范.可焊接的聚氨酯漆包圆铜线.180级 Specifications for particular types of winding wires - Solderable polyurethane enamelled round copper wire, class 180
BS EN 60512-12-1-2006 电子设备连接器.试验和测量.焊接试验.试验12a.金属熔化浴法测量可焊性 Connectors for electronic equipment - Tests and measurements - Soldering tests - Test 12a - Solderability, wetting, solder bath method
BS EN 60512-12-4-2006 电子设备用连接器.试验和测量.焊接试验.试验12d:焊料湿浴法测量焊接加热阻力 Connectors for electronic equipment - Tests and measurements - Soldering tests - Test 12d - Resistance to soldering heat, solder bath method
BS EN 60512-12-5-2006 电子设备用连接器.试验和测量.焊接试验.试验12e:铁锡焊法测量锡焊加热阻力 Connectors for electronic equipment - Tests and measurements - Soldering tests - Test 12e - Resistance to soldering heat, soldering iron method
BS EN 60512-12-6-1997 电子设备用机电元件.基本试验规程和测量方法.钎焊性试验. 试验12f:机械钎焊焊接过程中溶剂和清洗剂密封性 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Soldering tests - Test 12f - Sealing against flux and cleaning solvents in machine soldering
BS EN 60512-16-20-1997 电子设备用机电元件.基本试验规程和测量方法.第16部分:触点和接线端机械试验.第20节:第16项试验:机械强度( Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Mechanical tests on contacts and terminations - Test 16t - Mechanical strength (wired termination of solderless connections)
BS EN 60519-8-2005 电热装置安全性.第8部分:电渣焊接熔炉的特殊要求 Safety in electroheat installations - Part 8: Particular requirements for electroslag remelting furnaces
BS EN 60534-3-3-1998 工业过程控制阀.尺寸.对接焊接,两向,球型,垂直模式控制阀端对端尺寸 Industrial-process control valves - Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves
BS EN 60749-20-1-2009 半导体器件.机械和气候试验方法.对潮湿和焊接热综合效应敏感元器件的操作包装,标志和运输 Semiconductor devices - Mechanical and climatic test methods - Part 20-1:Handling, packing, labelling and shipping of surface-mount devices sensitive to the combined effect of moisture and soldering heat
BS EN 60779-2005 工业电热设备.电渣焊接重熔炉用试验方法 Industrial electroheat equipment - Test methods for electroslag remelting furnaces
BS EN 60974-1-2005 电弧焊设备.焊接电源 Arc welding equipment - Welding power sources
BS EN 60974-12-2005 电弧焊接设备.焊接电缆耦合器 Arc welding equipment - Coupling devices for welding cables
BS EN 60974-7-2005 电弧焊接设备.焊炬 Arc welding equipment - Torches
BS EN 60974-8-2009 弧焊设备.焊接和等离子切割设备用气体控制台 Arc welding equipment —Part 8: Gas consoles for welding and plasmacutting systems
BS EN 61076-4-107-2001 电子设备用连接器.印制板连接器.基本网格为2.0mm、固定部分有印制板用焊接终端和压入终端、活动部分有不可 Connectors for electronic equipment - Printed board connectors with assessed quality - Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations
BS EN 61188-5-2-2003 印制板及其组件.设计和使用.焊接(焊接区/接缝)的考虑.分立元件 Printed boards and assemblies - Design and use - Attachment (land/joint) considerations - Discrete components
BS EN 61188-5-3-2007 印制电路板和印制电路板组件.设计和使用.第5-3部分:焊接(焊接区/焊缝)考虑.两面带有翅形引线的部件 Printed boards and printed board assemblies - Design and use - Attachment (land/joint) considerations - Components with gull- wing leads on two sides
BS EN 61188-5-4-2007 印制电路板和印制电路板组件.设计和使用.第5-4部分:焊接(焊接区/焊缝)考虑.两面带有J形引线的部件 Printed boards and printed board assemblies - Design and use - Attachments (land/joint) considerations - Components with J leads on two sides
BS EN 61188-5-5-2007 印制电路板和印制电路板组件.设计和使用.第5-5部分:焊接(焊接区/焊缝)考虑.四面带有翅形引线的部件 Printed boards and printed board assemblies - Design and use - Attachment (land/joint) considerations - Components with gull- wing leads on four sides
BS EN 61188-5-8-2008 印制电路板和印制电路板组件.设计和使用.焊接(焊接区/焊缝)要求.区域阵列组件(BGA、FBGA、CGA、LGA) Printed boards andprinted boardassemblies — Designand use —Part 5-8: Attachment (land/joint)considerations — Area arraycomponents (BGA, FBGA, CGA, LGA)
BS EN 61191-1-1999 印制电路板组件.通用规范.使用表面安装和相关装配技术的焊接电气和电子组件要求 Printed board assemblies - Generic specification - Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies
BS EN 61191-2-1999 印制电路板组件.分规范.表面安装焊接组件要求 Printed board assemblies - Sectional specification - Requirements for surface mount soldered assemblies
BS EN 61191-3-1999 印制电路板组件.分规范.通孔安装焊接组件要求 Printed board assemblies - Sectional specification - Requirements for through-hole mount soldered assemblies
BS EN 61191-4-1999 印制电路板组件.分规范.端点焊接组件要求 Printed board assemblies - Sectional specification - Requirements for terminal soldered assemblies
BS EN 62135-2-2008 电阻焊接设备.电磁兼容性(EMC)要求 Resistance welding equipment - Electromagnetic compatibility (EMC) requirements
BS EN 62137-1-1-2007 表面安装技术.表面安装焊接接缝的环境和耐久性试验方法.第1-1部分:拉拔强度试验 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Pull strength test
BS EN 62137-1-2-2007 表面安装技术.表面安装焊接接缝的环境和耐久性试验方法.第1-2部分:剪切强度试验 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Shear strength test
BS EN 62137-1-5-2009 表面安装技术.表面安装焊接点的环境承受试验方法.机械剪切疲劳试验 Surface mounting technology - Environmental and endurance test methods for surface mount solder joints - Part 1-5:Mechanical shear fatigue test
BS EN 756-2004 焊接消耗品.非合金和细粒钢埋弧焊用实芯焊丝、实芯焊丝和药芯焊丝混合助熔剂.分类 Welding consumables - Solid wires, solid wire-flux and tubular cored electrode-flux combinations for submerged arc welding of non alloy and fine grain steels - Classification
BS EN 757-1997 焊接用料.高强度钢手工金属弧焊用的涂药焊条的分类 Welding consumables - Covered electrodes for manual metal arc welding of high strength steels - Classification
BS EN 760-1996 焊接用料 .埋弧焊用焊剂.分类 Welding consumables - Fluxes for submerged arc welding - Classification
BS EN 875-1995 金属材料焊接的破坏试验.冲击试验.试样定位、槽口取向和检验 Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination
BS EN 876-1995 金属材料焊接的破坏试验.熔焊接点中焊接金属的纵向拉伸试验 Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints
BS EN 895-1995 金属材料焊接的破坏试验.横向抗拉试验 Destructive tests on welds in metallic materials - Transverse tensile test
BS EN IS0 22825-2006 焊接的无损试验.超声波试验.奥氏体钢和镍合金焊接试验 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys
BS EN ISO 10042-2006 焊接.铝和铝合金弧焊接头.缺陷质量分级 Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections
BS EN ISO 10447-2007 电阻焊接.电阻点焊和凸焊的剥离和凿剥离测试 Resistance welding - Peel and chisel testing of resistance spot and projection welds
BS EN ISO 1071-2003 焊接耗材.铸铁熔焊用药皮(涂料)电焊条、焊丝、焊棒和管状焊条.分类 Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification
BS EN ISO 10882-1-2001 焊接和有关过程的卫生和安全.操作者呼吸区域的空气悬浮颗粒和气体的取样.空气悬浮颗粒取样 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Sampling of airborne particles
BS EN ISO 10882-2-2000 焊接及相关工艺的卫生与安全.操作人员呼吸区域内空气中悬浮颗粒及气体的抽样.气体的抽样 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Sampling of gases
BS EN ISO 11611-2008 焊接和类似工艺用防护服装 Protective clothing for use in welding and allied processes
BS EN ISO 11970-2007 钢铸件产品焊接用焊接程序的规范和验收 Specification and approval of welding procedures for production welding of steel castings
BS EN ISO 13916-1997 焊接.预热温度、层间温度和预加热的维持温度测量的导则 Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
BS EN ISO 13918-2008 焊接.弧螺栓焊用螺栓和陶瓷箍套 Welding - Studs and ceramic ferrules for arc stud welding
BS EN ISO 13919-1-1997 焊接.电子和激光束焊接接头.缺陷的质量级别导则.钢 Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Steel
BS EN ISO 13919-2-2001 焊接.电子和激光束焊接接头.缺陷的质量分级指南.铝及其可焊合金 Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Aluminium and its weldable alloys
BS EN ISO 13920-1997 焊接.焊接结构的通用公差.长度和角度尺寸.形状和位置 Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position
BS EN ISO 14114-1999 气焊设备.焊接,切割和有关加工工艺用的乙炔导管系统.一般要求 Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - General requirements
BS EN ISO 14172-2008 焊接消耗品.镍和镍合金的手工金属弧焊用涂敷焊条.分类 Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification
BS EN ISO 14175-2008 焊接消耗品.氧炔焊及有关工艺用气体和混合气体 Welding consumables - Gases and gas mixtures for fusion welding and allied processes
BS EN ISO 14270-2001 电阻点焊、滚焊和浮凸焊接机械剥离试验的程序和样品尺寸 Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds
BS EN ISO 14271-2001 电阻点焊、凸焊和滚焊的焊接点维氏硬度试验(低荷载和超微硬度) Vickers hardness testing of resistance spot, projection and seam welds (low load and microhardness)
BS EN ISO 14272-2001 电阻点焊和浮凸焊的焊接点十字形抗拉试验的试样尺寸和程序 Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds
BS EN ISO 14273-2001 电阻点焊、缝焊和浮凸焊接的焊接点剪切试验的试样尺寸和程序 Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds
BS EN ISO 14323-2006 电阻点焊和凸焊.焊接破坏试验.影响剪切试验和剪切试验的样本尺寸和程序 Resistance spot welding and projection welds - Destructive testing of welds - Specimen dimensions and procedure for impact shear test and cross-tension testing
BS EN ISO 14324-2003 电阻点焊.焊接有损试验.点焊接头的疲劳试验方法 Resistance spot welding - Destructive tests of welds - Method for the fatigue testing of spot welded joints
BS EN ISO 14327-2004 电阻焊接.电阻点焊、凸焊和缝焊用可焊性瓣轮的测定规程 Resistance welding - Procedures for determining the weldability lobe for resistance spot, projection and seam welding
BS EN ISO 14329-2003 电阻点焊.焊接有损试验.电阻点焊、缝焊和凸焊的故障类型和几何测量 Resistance welding - Destructive tests of welds - Failure types and geometric measurements for resistance spot, seam and projection welds
BS EN ISO 14341-2008 焊接消耗品.非合金钢和细粒钢金属气体保护焊用焊丝和溶敷金属.分类 Welding consumables - Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification
BS EN ISO 14343-2009 焊接材料.不锈钢和耐热钢电弧焊用焊丝电极、焊丝和焊条.分类 Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification
BS EN ISO 14372-2001 焊接耗材.通过测量扩散氢方法测定手工电弧焊焊条的抗湿性 Welding consumables - Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen
BS EN ISO 14373-2007 电阻焊接.无涂层和有涂层低碳钢的点焊程序 Resistance welding - Procedure for spot welding of uncoated and coated low carbon steels
BS EN ISO 14554-1-2001 焊接的质量要求.金属材料的电阻焊接.全面质量要求 Quality requirements for welding - Resistance welding of metallic materials - Comprehensive quality requirements
BS EN ISO 14554-2-2001 焊接的质量要求.金属材料的电阻焊接.基本质量要求 Quality requirements for welding - Resistance welding of metallic materials - Elementary quality requirements
BS EN ISO 14555-2006 焊接.金属材料的电弧螺栓焊 Welding - Arc stud welding of metallic materials
BS EN ISO 14731-2006 焊接协调.任务和责任 Welding coordination - Tasks and responsibilities
BS EN ISO 14744-1-2008 焊接.电子束焊接机器的验收检验.原则和验收条件 Welding - Acceptance inspection of electron beam welding machines - Principles and acceptance conditions
BS EN ISO 14744-2-2001 焊接.电子束焊接机的验收检验.加速电压特性测量 Welding - Acceptance inspection of electron beam welding machines - Measurement of accelerating voltage characteristics
BS EN ISO 14744-3-2001 焊接.电子束焊接机的验收检验.电子束电流特性的测量 Welding - Acceptance inspection of electron beam welding machines - Measurement of beam current characteristics
BS EN ISO 14744-4-2001 焊接.电子束焊接机的验收检验.焊接速度的测量 Welding - Acceptance inspection of electron beam welding machines - Measurement of welding speed
BS EN ISO 14744-5-2001 焊接.电子束焊接机的验收检验.偏转精度的测量 Welding - Acceptance inspection of electron beam welding machines - Measurement of run-out accuracy
BS EN ISO 14744-6-2001 焊接.电子束焊接机的验收检验.电焊位置稳定性的测量 Welding - Acceptance inspection of electron beam welding machines - Measurement of stability of spot position
BS EN ISO 15011-1-2009 焊接和相关工艺中的健康和安全.烟尘和气体的实验室取样方法.电弧焊产生的烟尘排放率测定和烟尘采集分析 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Determination of fume emission rate during arc welding and collection of fume for analysis
BS EN ISO 15011-2-2009 焊接和相关工艺中的健康和安全.对电弧焊产生的烟尘和气体取样的实验室方法.在电弧焊、切削加工和刨削槽时, Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Determination of the emission rates of carbon monoxide (CO), carbon dioxide (CO2), nitrogen monoxide (NO) and nitrogen dioxide (NO2) during arc welding, cutting and gouging
BS EN ISO 15011-3-2009 焊接和相关工艺的健康和安全.烟和气体取样的实验室法.电弧焊时臭氧排放率的测定 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Determination of ozone emission rate during arc welding
BS EN ISO 15011-4-2006+A1-2008 焊接和相关工艺的卫生和安全.烟,气取样用实验室法.第4部分:烟数据单 Health and safety inwelding and alliedprocesses — Laboratorymethod for samplingfume and gases —Part 4: Fume data sheets
BS EN ISO 15012-1-2005 焊接和相关工艺中的健康和安全.空气过滤用设备的试验和标记要求.焊接烟尘分离效率的试验 Health and safety in welding and allied processes - Requirements testing and marking of equipment for air filtration - Testing of the separation efficiency for welding fume
BS EN ISO 15012-2-2008 焊接和相关工艺中的卫生和安全.空气过滤设备的要求、测试和标记.采集罩和喷嘴的最小空气体积流率的测定 Health and safety in welding and allied processes - Requirements, testing and marking of equipment for air filtration - Determination of the minimum air volume flow rate of captor hoods and nozzles
BS EN ISO 15607-2003 金属材料焊接程序规范和合格鉴定.总则 Specification and qualification of welding procedures for metallic materials - General rules
BS EN ISO 15609-1-2004 金属材料的焊接程序规范和合格鉴定.焊接程序规范.电弧焊 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Arc welding
BS EN ISO 15609-2-2001 金属焊接程序的规范和合格评定.焊接程序规范.气焊 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Gas welding
BS EN ISO 15609-3-2004 金属材料焊接程序的规范和合格评定.焊接程序规范.电子束焊 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Electron beam welding
BS EN ISO 15609-4-2009 金属材料焊接工艺的规则和限定.焊接工艺规范.激光束焊接 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding (ISO 15609-4:2009)
BS EN ISO 15609-5-2004 金属材料的焊接程序规范和合格鉴定.焊接程序规范.电阻焊接 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Resistance welding
BS EN ISO 15610-2003 金属材料焊接程序的规范和认可.基于试验消耗品的认可 Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables
BS EN ISO 15611-2003 金属材料焊接程序规范和合格鉴定.根据已有焊接经验进行合格鉴定 Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience
BS EN ISO 15612-2004 金属材料焊接程序的规范和合格鉴定.标准焊接程序采用的合格鉴定 Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure
BS EN ISO 15613-2004 金属材料的焊接程序的鉴定和规范.基于预生产焊接试验的合格鉴定 Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test
BS EN ISO 15614-1-2004+A1-2008 金属材料焊接工艺规范和鉴定.焊接工艺试验.钢弧焊和气焊、镍及镍合金的弧焊 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Arc and gas welding of steels and arc welding of nickel and nickel alloys
BS EN ISO 15614-10-2005 金属材料焊接程序的规范和鉴定.焊接程序试验.高压干焊 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Hyperbaric dry welding
BS EN ISO 15614-11-2002 金属材料焊接程序的规范和合格鉴定.焊接程序试验.电子和激光束焊接 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Electron and laser beam welding
BS EN ISO 15614-12-2004 金属材料焊接程序的规范和合格鉴定.焊接程序试验.点焊、缝焊和凸焊 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Spot, seam and projection welding
BS EN ISO 15614-13-2005 金属材料焊接程序的规范和鉴定.焊接程序试验.电阻对接焊和电弧对接焊 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Resistance butt and flash welding
BS EN ISO 15614-2-2005 金属材料焊接过程的规范和鉴定.焊接过程试验.铝及其合金的电弧焊 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Arc welding of aluminium and its alloys
BS EN ISO 15614-3-2008 金属材料用焊接程序的规范和鉴定.焊接程序试验.非合金和低合金铸铁的氧炔焊 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Fusion welding of non-alloyed and low-alloyed cast irons
BS EN ISO 15614-4-2005 金属材料焊接过程的规范和鉴定.焊接过程试验.铝铸件的精焊接 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Finishing welding of aluminium castings
BS EN ISO 15614-5-2004 金属材料焊接程序的规范和鉴定.焊接程序试验.钛、锆及其合金电弧焊 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Arc welding of titanium, zirconium and their alloys
BS EN ISO 15614-6-2006 金属材料焊接程序的规范和合格鉴定.焊接程序试验.铜及其合金的弧焊和气焊 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Arc and gas welding of copper and its alloys
BS EN ISO 15614-7-2007 金属材料焊接程序规范和鉴定.焊接程序试验.覆盖焊接 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Overlay welding
BS EN ISO 15614-8-2002 金属材料焊接程序的规范和合格鉴定.焊接程序试验.管对管焊接. 平板接合 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Welding of tubes to tube-plate joints
BS EN ISO 15615-2002 气焊设备.焊接,切割和有关加工工艺用的乙炔气支管系统.高压装置的安全性要求 Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - Safety requirements in high-pressure devices
BS EN ISO 15616-1-2003 高质量焊接和切割用CO2激光束机的验收试验.通用原则和验收条件 Acceptance tests for CO2- laser beam machines for high quality welding and cutting - General principles, acceptance conditions
BS EN ISO 15616-2-2003 高质量焊接和切割用CO2激光束机的验收试验.静态和动态精确度的测定 Acceptance tests for CO2- laser beam machines for high quality welding and cutting - Measurement of static and dynamic accuracy
BS EN ISO 15616-3-2003 高质量焊接和切割用CO2激光束机的验收试验.气体流量和压力测量仪的校正 Acceptance tests for CO2- laser beam machines for high quality welding and cutting - Calibration of instruments for measurement of gas flow and pressure
BS EN ISO 15618-1-2002 水下焊接焊工的资格鉴定测试.高压湿法焊接的潜水焊工 Qualification testing of welders for under-water welding - Diver-welders for hyperbaric wet welding
BS EN ISO 15618-2-2002 水下焊接焊工的资格鉴定测试.潜水焊工和高压干法焊工 Qualification testing of welders for under-water welding - Diver-welders and welding operators for hyperbaric dry welding
BS EN ISO 15620-2000 焊接.金属材料摩擦焊接 Welding - Friction welding of metallic materials
BS EN ISO 15630-2-2002 混凝土的钢筋和预应力用钢.试验方法.焊接纤维 Steel for the reinforcement and prestressing of concrete - Test methods - Welded fabric
BS EN ISO 15792-1-2008 焊接消耗品.试验方法.钢、镍和镍合金全焊金属试样的试验方法 Welding consumables - Test methods - Test methods for all-weld metal test specimens in steel, nickel and nickel alloys
BS EN ISO 15792-2-2008 焊接消耗品.试验方法.钢的单道焊和双道焊技术试样的制备 Welding consumables - Test methods - Preparation of single-run and two-run technique test specimens in steel
BS EN ISO 15792-3-2008 焊接消耗品.试验方法.角焊中焊接消耗品的填位能力和根部焊透力的分类测试 Welding consumables - Test methods - Classification testing of positional capacity and root penetration of welding consumables in a fillet weld
BS EN ISO 16432-2006 电阻焊接.用压纹凸焊法对无覆层和有覆层低碳钢的凸焊规程 Resistance welding - Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s)
BS EN ISO 16433-2006 电阻焊接.无涂覆和涂覆的低碳钢密封焊接用程序 Resistance welding - Procedure for seam welding of uncoated and coated low carbon steels
BS EN ISO 16834-2007 焊接消耗品.高强度钢气体保护电弧焊用焊丝电极、焊丝、焊条和沉积金属.分类 Welding consumables - Wire electrodes, wires, rods and deposits for gas-shielded arc welding of high strength steels - Classification
BS EN ISO 17632-2008 焊接消耗品.非合金和细晶粒钢的气体保护和无气体保护金属弧焊用管状芯焊条.分类 Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification
BS EN ISO 17633-2006 焊接消耗品.不锈钢和耐热钢的气体保护和非气体保护金属弧焊用药芯电极和焊条.分类 Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification
BS EN ISO 17634-2006 焊接消耗品.抗蠕变钢的气体保护金属极电弧焊用药芯焊条.分类 Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels - Classification
BS EN ISO 17641-1-2004 金属材料焊接的有损试验.焊件的热裂试验.弧焊过程.概要 Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - General
BS EN ISO 17641-2-2005 金属材料焊接的有损试验.焊接的热裂试验.弧焊工艺.自束试验 Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Self-restraint tests
BS EN ISO 17642-1-2004 金属材料中焊接的有损检验.焊接的冷裂试验.弧焊工艺.总则 Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - General
BS EN ISO 17642-2-2005 金属材料焊接的有损试验.焊接的冷裂试验.弧焊工艺.自束试验 Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Self-restraint tests
BS EN ISO 17642-3-2005 金属材料焊接的有损检验.焊接的冷裂试验.弧焊工艺.外部载荷试验 Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Externally loaded tests
BS EN ISO 17652-1-2003 焊接.有关焊接和相关工艺的工厂底漆的试验.一般要求 Welding - Test for shop primers in relation to welding and allied processes - General requirements
BS EN ISO 17652-2-2003 焊接.有关焊接和相关工艺有关的工厂底漆的试验.工厂底漆的焊接特性 Welding - Test for shop primers in relation to welding and allied processes - Welding properties of shop primers
BS EN ISO 17652-3-2003 焊接.有关焊接和相关工艺有关的工厂底漆的试验.热切割 Welding - Test for shop primers in relation to welding and allied processes - Thermal cutting
BS EN ISO 17652-4-2003 焊接.有关焊接和相关工艺有关的工厂底漆的试验.烟气排放 Welding - Test for shop primers in relation to welding and allied processes - Emission of fumes and gases
BS EN ISO 17654-2003 金属材料焊缝的有损试验.电阻焊接.电阻缝焊的压力试验 Destructive tests on welds in metallic materials - Resistance welding - Pressure test on resistance seam welds
BS EN ISO 17657-1-2006 电阻焊接.电阻焊接用焊接电流测量.测量指南 Resistance welding - Welding current measurement for resistance welding - Guidelines for measurement
BS EN ISO 17657-2-2006 电阻焊接.电阻焊接用焊接电流测量.带电流感应线圈的焊接电流计 Resistance welding - Welding current measurement for resistance welding - Welding current meter with current sensing coil
BS EN ISO 17657-3-2006 电阻焊接.电阻焊接用焊接电流测量.电流感应线圈 Resistance welding - Welding current measurement for resistance welding - Current sensing coil
BS EN ISO 17657-4-2006 电阻焊接.电阻焊接用焊接电流测量.校验系统 Resistance welding - Welding current measurement for resistance welding - Calibration system
BS EN ISO 17657-5-2006 电阻焊接.电阻焊接用焊接电流测量.焊接电流测量系统的验证 Resistance welding - Welding current measurement for resistance welding - Verification of welding current measuring system
BS EN ISO 17659-2004 焊接.带图解的焊接接头的多语种术语 Welding - Multilingual terms for welded joints with illustrations
BS EN ISO 17660-1-2006 焊接.钢筋焊接.承载焊接接缝 Welding - Welding of reinforcing steel - Part 1: Load-bearingwelded joints
BS EN ISO 17660-2-2006 焊接.钢筋焊接.非承载焊接接缝 Welding - Welding of reinforcing steel - Part 2: Non load-bearingwelded joints
BS EN ISO 17662-2005 焊接.包含辅助工作的焊接用设备的校正、鉴定和效验 Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities
BS EN ISO 17663-2009 焊接.与焊接和相关工艺过程有关的热处理质量要求 Welding - Quality requirements for heat treatment in connection with welding and allied processes(ISO17663:2009)
BS EN ISO 17677-1-2009 电阻焊接.词汇表.点焊,凸焊和缝焊 Resistance welding - Vocabulary - Part 1: Spot, projection and seamwelding (ISO 17677-1:2009)
BS EN ISO 18273-2004 焊接消耗品.铝和铝合金焊接用丝状电极、焊丝和焊条.分类 Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification
BS EN ISO 18274-2004 焊接消耗品.镍和镍合金熔焊用丝状和杆状电极、焊丝和焊条.分类 Welding consumables - Wire and strip electrodes, wires and rods for fusion welding of nickel and nickel alloys - Classification
BS EN ISO 18279-2004 钎焊.钎焊接缝的缺陷 Brazing - Imperfections in brazed joints
BS EN ISO 18592-2009 电阻焊接.焊接破坏性试验.多点疲劳试验方法.焊接样本 Resistance welding - Destructive testing of welds - Method for the fatigue testing of multispot- welded specimens
BS EN ISO 18594-2007 电阻点焊、凸焊和缝隙焊接.测定铝和钢材料跃迁电阻的方法 Resistance spot-, projection- and seam-welding - Method for determining the transition resistance on aluminium and steel material
BS EN ISO 18595-2007 电阻焊接.铝和铝合金的点焊.可焊性、焊接和测试 Resistance welding - Spot welding of aluminium and aluminium alloys - Weldability, welding and testing
BS EN ISO 21670-2003 法兰六角焊接螺母 Hexagon weld nuts with flange
BS EN ISO 21952-2007 焊接消耗品.抗蠕变钢的气体保护电弧焊用丝状电极、焊丝、焊条和沉渍物. 分类 Welding consumables - Wire electrodes, wires, rods and deposits for gas-shielded arc welding of creep-resisting steel - Classification
BS EN ISO 22827-1-2006 Nd:YAG激光束焊接机器的验收试验.带光纤送的机器.激光装配 Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Laser assembly
BS EN ISO 22827-2-2006 Nd:YAG激光束焊接机器的验收试验.带光纤传送的机器.移动机理 Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Moving mechanism
BS EN ISO 22829-2007 电阻焊接.带组合变压器焊接枪用变压器整流器.工作在1000 Hz频率的变压器整流器 Resistance welding - Transformer-rectifier for welding guns with integrated transformers - Transformer- rectifier units operating at 1000 Hz frequency
BS EN ISO 23278-2009 焊接点无损检测.焊接点磁粒试验.验收标准 Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance levels
BS EN ISO 24034-2005+A1-2008 焊接消耗品.钛和钛合金的熔焊用焊丝和焊条.分类 Welding consumables - Solid wires and rods for fusion welding of titanium and titanium alloys - Classification
BS EN ISO 24373-2009 焊接消耗品.铜和铜合金熔焊用实心焊丝和焊条.分类 Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification
BS EN ISO 24598-2007 焊接消耗品.耐蠕变钢潜弧焊用实心焊丝、管状芯焊条和焊条/焊剂组合件.分类 Welding consumables - Solid wire electrodes, tubular coredelectrodes and electrode/flux combinations for submerged arcwelding of creep-resisting steels - Classification
BS EN ISO 2503-2009 气体焊接设备.在压力为300巴(30兆帕)以下条件下在焊接,切割和相关工艺中用于气体钢瓶中的压力调节器和带有 Gas welding equipment - Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa)
BS EN ISO 2560-2009 焊接材料.非合金钢和细粒钢的手工金属电弧焊用涂敷焊条.分类 Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification
BS EN ISO 26304-2009 焊接消耗品.高强度钢埋弧焊用线状和管状芯电极及焊条熔剂化合物.分类 Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification
BS EN ISO 3580-2008 焊接消耗品.抗蠕变钢的手工金属电弧焊用药皮电焊条.规范 Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels - Classification
BS EN ISO 3690-2001 焊接和相关处理.铁素体钢弧焊金属氢含量的测定 Welding and allied processes - Determination of hydrogen content in ferritic steel arc weld metal
BS EN ISO 4063-2009 焊接及相关工艺过程.工艺过程的名称和参考编号 Welding and allied processes - Nomenclature of processes and reference numbers
BS EN ISO 5182-2009 焊接.电阻焊条和辅助设备材料 Resistance welding - Materials for electrodes and ancillary equipment(ISO 5182:2008)
BS EN ISO 5183-1-2001 电阻焊接设备.外锥度1:10的电极适配器.锥度1:10的圆锥形固定件 Resistance welding equipment - Electrode adaptors, male taper 1: 10 - Conical fixing, taper 1:10
BS EN ISO 5183-2-2001 电阻焊接设备.外锥度1:10电极适配器.端推力电极用平行杆固定件 Resistance welding equipment - Electrode adaptors, male taper 1: 10 - Parallel shank fixing for end-thrust electrodes
BS EN ISO 544-2003 焊接消耗品.焊接填充金属的交货技术条件.产品的类型、尺寸、公差和标记 Welding consumables - Technical delivery conditions for welding filler metals - Type of product, dimensions, tolerances and markings
BS EN ISO 5817-2007 焊接.钢、镍、钛和其合金的熔焊接头(束焊除外).缺陷的质量等级 Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections
BS EN ISO 636-2008 焊接消耗品.非合金钢和细粒钢的钨惰性气体焊用焊条、焊丝和溶敷金属.分类 Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification
BS EN ISO 6520-1-2007 焊接和相关工艺.金属材料中几何缺陷的分类.熔焊 Welding and allied processes - Classification of geometric imperfections in metallic materials - Fusion welding
BS EN ISO 6520-2-2002 焊接及相关工艺.金属材料中几何缺陷的分类.压力焊 Welding and allied processes - Classification of geometric imperfections in metallic materials - Welding with pressure
BS EN ISO 6847-2001 焊接消耗品.化学分析用的焊接金属块的沉积 Welding consumables - Deposition of a weld metal pad for chemical analysis
BS EN ISO 6947-1997 焊接.工作位置.倾角和转动的定义 Welds - Working positions - Definitions of angles of slope and rotation
BS EN ISO 7291-2001 气焊设备.300bar以下的焊接、切削及相关工艺用汇流系统用压力调节器 Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 300 bar
BS EN ISO 8205-3-1997 电阻焊接水冷次级线圈连接电缆.试验要求 Water-cooled secondary connection cables for resistance welding - Test requirements
BS EN ISO 8249-2000 焊接.奥氏体和双重铁氧体奥氏体镍不锈钢焊接金属中铁素体数的测定 Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals
BS EN ISO 8501-3-2006 涂料和相关产品使用前钢衬底的处理.表面清洁度的目测评定.:焊接、切边和其它表面缺陷区域的处理等级 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Preparation grades of welds, edges and other areas with surface imperfections
BS EN ISO 9018-2003 金属材料焊接的破坏试验.十字形接缝和搭接缝的抗拉试验 Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints
BS EN ISO 9539-2010 气焊设备.用于气体焊接、切割和相关工艺过程设备的材料 Gas welding equipment - Materials for equipment used in gas welding, cutting and allied processes
BS EN ISO 9692-1-2003 焊接和相关工艺.接缝制备的建议.钢的手动金属电弧焊、气体保护金属电弧焊、气焊、TIG焊接和束焊 Welding and allied processes - Recommendations for joint preparation - Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels
BS EN ISO 9692-2-1998 焊接和相关工艺.接头的预处理.钢的埋弧焊 Welding and allied processes - Joint preparation - Submerged arc welding of steels
BS EN ISO 9692-3-2001 焊接和相关工艺.接头的准备.铝及其合金的金属极惰性气体保护焊和钨极惰性气体保护焊 Welding and allied processes - Joint preparation - Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys
BS EN ISO 9692-4-2003 焊接和相关工艺.接头制备.包钢 Welding and allied processes - Joint preparation - Clad steels
BS ISO 13953-2001 聚乙烯管道和配件.根据对焊接头对试样的抗拉强度和断裂模式的测定 Polyethelene (PE) pipes and fittings - Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
BS ISO 14347-2008 疲劳.焊接中空部件连接件用设计程序.建议 Fatigue - Design procedure for welded hollow-section joints - Recommendations
BS ISO 17657-1-2006 电阻焊.电阻焊的焊接电流测量.测量指南 Resistance welding - Welding current measurement for resistance welding - Guidelines for measurement
BS ISO 17657-2-2006 电阻焊.电阻焊的焊接电流测量.带电流感应线圈的焊接电流表 Resistance welding - Welding current measurement for resistance welding - Welding current meter with current sensing coil
BS ISO 17657-3-2006 电阻焊.电阻焊的焊接电流测量.电流感应线圈 Resistance welding - Welding current measurement for resistance welding - Current sensing coil
BS ISO 17657-4-2006 电阻焊.电阻焊的焊接电流测量.校对系统 Resistance welding - Welding current measurement for resistance welding - Calibration system
BS ISO 17657-5-2006 电阻焊.电阻焊的焊接电流测量.验证焊接电流测量系统 Resistance welding - Welding current measurement for resistance welding - Verification of welding current measuring system
BS ISO 18172-1-2007 储气瓶.可再充装的焊接不锈钢气瓶.试验压力≤6MPa Gas cylinders - Refillable welded stainless steel cylinders - Test pressure 6 MPa and below
BS ISO 18172-2-2007 储气瓶.可再充装的焊接不锈钢气瓶.试验压力≥6MPa Gas cylinders - Refillable welded stainless steel cylinders - Test pressure greater than 6 MPa
BS ISO 18207-2006 道路车辆.3.5吨以下拖车在疲劳试验后联轴节球体用焊接牵引支撑架的控制 Road vehicles - Trailers up to 3,5 t. Control of welded towing brackets for coupling ball after fatigue testing
BS ISO 20703-2007 储气瓶.可再填充的焊接铝合金气瓶.设计、结构和试验 Gas cylinders - Refillable welded aluminium-alloy cylinders - Design, construction and testing
BS ISO 22829-2007 电阻焊接.带组合变压器焊接枪用变压器整流器.1000Hz频率工作的变压器整流器 Resistance welding - Transformer-rectifier for welding guns with integrated transformers - Transformer-rectifier units operating at 1000 Hz frequency
BS ISO 24394-2008 航空航天设备的焊接.焊接工和焊接操作工认证试验.金属部件的熔焊 Welding for aerospace applications - Qualification test for welders and welding operators - Fusion welding of metallic components
BS ISO 24497-3-2007 无损检验.金属磁存储器.焊接接头的检验 Non-destructive testing - Metal magnetic memory - Inspection of welded joints
BS ISO 4706-2008 气瓶.可再填充焊接钢瓶.试验压力≤60ba Gas cylinders - Refillable welded steel cylinders - Test pressure 60 bar and below
BS ISO 6971-2002 焊接结构用弯板拉曳链、附件和链轮 Cranked-link drag chains of welded construction, attachments and sprockets
BS ISO 6972-2002 焊接结构工程用弯板链、附件和链轮 Cranked-link mill chains of welded construction, attachments and sprockets
BS ISO 857-2-2006 焊接和相关工艺.词汇.软钎焊和铜焊工艺及相关术语 Welding and allied processes - Vocabulary - Soldering and brazing processes and related terms
BS L 112-1971 铝-镁(0.8)-硅(1)-锰(0.7)合金锻坯和锻件规范(溶液处理和沉淀处理)(适用于焊接) Specification for forging stock and forgings of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
BS L 113-1971 铝-镁(0.8)-硅(1)-锰(0.7)合金薄板材和带材规范(溶液处理和沉淀处理)(适用于焊接) Specification for sheet and strip of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
BS L 114-1971 铝-镁(0.8)硅(1)-锰(0.7)合金管规范(溶液处理和沉淀处理)(壁厚度小于10mm)(适用于焊接) Specification for tube of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (not exceeding 10 mm wall thickness) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
BS L 115-1971 铝-镁(0.8)硅(1)-锰(0.7)合金板规范(溶液处理,拉伸控制及沉淀处理)(厚度小于25mm)(适用于焊接) Specification for plate of aluminium-magnesium-silicon-manganese alloy (solution treated, controlled stretched and precipitation treated) (not exceeding 25 mm thickness) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
BS S 164-2002 航空航天系列.1%铬-钼钢坯,棒材,锻件和部件(1150对1300MPa:限制截面部分为16mm)(适用于焊接) 1 % Chromium-molybdenum steel billets, bars, forgings and parts - (1150 to 1300 MPa: Limiting ruling section 16 mm) (Suitable for welding)
BS S 534-1969 铬-钼钢薄板材和带材规范(880/1080MPa)(适用于焊接) Specification for chromium-molybdenum steel sheet and strip (880/1080 MPa (suitable for welding)
BS S 535-1969 铬-钼钢薄板材和带材规范(1150/1300MPa)(适用于焊接) Specification for chromium-molybdenum steel sheet and strip (1150/1300 Mpa) (suitable for welding)
BS T 64-1972 碳-锰钢管材规范(550 N/mm<上标2>)(管外径小于12.5mm)(可焊接) Specification for carbon-manganese steel tube (550 N/mm2) (tube less than 12.5 mm outside diameter) (weldable)
BS T 67-1972 18/10铬-镍耐腐蚀钢管材规范(钛稳定的:550 N/mm<上标2>)(可焊接) Specification for 18/10 chromium-nickel corrosion-resisting steel tube (titanium stabilized: 550 N/mm2) (weldable)
BS T 69-1972 冷拉18/10铬-镍耐腐蚀钢管材规范(钛稳定的:800 N/mm<上标2>)(可焊接) Specification for cold drawn 18/10 chromium-nickel corrosion-resisting steel tube (titanium stabilized: 800 N/mm2) (weldable)
BS T 76-1978 铬-钼钢管规范(770MPa)(可焊接) Specification for chromium-molybdenum steel tube (770 MPa) (weldable)
BS T 77-1980 铬-钼钢管材规范(900MPa)(可焊接) Specification for chromium-molybdenum steel tube (900 MPa) (weldable)
DD ENV 10080-1996 混凝土加固用钢材.可焊接的混凝土加强钢筋B500.棒,环盘,已焊过的钢筋网的交货技术状态 Steel for the reinforcement of concrete. Weldable ribbed reinforcing steel B500. Technical delivery conditions for bars, coils and welded fabric
DD ENV 10220-1994 无缝钢管和焊接钢管.尺寸及单位长度质量 Seamless and welded steel tubes. Dimensions and masses per unit length
PD ISO/TR 17663-2001 焊接.与焊接和相关工艺有关的热处理的质量要求导则 Welding. Guidelines for quality requirements for heat treatment in connection with welding and allied processes
编号 中文名称 英文名称

返回