| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| 05/30111735 DC-2005 | ISO 4141-2:道路车辆.多芯电缆.第2部分:高性能铠装电缆的试验方法和要求 | ISO 4141-2: Road vehicles - Multi-core cables - Part 2: Test methods and requirements for high performance sheathed cables |
| IEC 60034-2 AMD 1-1995 | 旋转电机 第2部分:旋转电机损耗和效率的试验测定方法(不包括牵引车辆用电机) 修改1 | Rotating electrical machines - Part 2: Methods of determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles); Amendment 1 |
| IEC 60034-2 AMD 2-1996 | 旋转电机 第2部分:旋转电机损耗和效率的试验测定方法(不包括牵引车辆用电机) 修改2 | Rotating electrical machines - Part 2: Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles); Amendment 2 |
| IEC 60034-2-1-2007 | 旋转电机.第2-1部分:试验(不包括牵引车辆用电机)中损失和功效的测定用标准方法 | Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) |
| IEC 60034-2A-1974 | 旋转电机 第2部分:旋转电机损耗和效率的试验测定方法(不包括牵引车辆用电机) 补充1:用量热法测定损耗 | Rotating electrical machines; part 2: methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicules); first supplement: measurement of losses by the calorimetric method |
| IEC 60077-1-1999 | 铁路应用 机车车辆用电气设备 第1部分:一般运行条件和一般规则 | Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules |
| IEC 60077-2-1999 | 铁路应用 机车车辆用电气设备 第2部分:电工元件 一般规则 | Railway applications - Electric equipment for rolling stock - Part 2: Electrotechnical components - General rules |
| IEC 60077-3-2001 | 铁路应用 机车车辆用电气设备 第3部分：电工元件 直流断路器用规则 | Railway applications - Electric equipment for rolling stock - Part 3: Electrotechnical components; Rules for d.c. circuit-breakers |
| IEC 60077-4-2003 | 铁路设施.机车车辆用电气设备.第4部分:电工元件.交流断路器规则 | Railway applications - Electric equipment for rolling stock - Part 4: Electrotechnical components; Rules for AC circuit-breakers |
| IEC 60077-5-2003 | 铁路设施.机车车辆用电气设备.第5部分:电工元件.HV熔断器规则 | Railway applications - Electric equipment for rolling stock - Part 5: Electrotechnical components; Rules for HV fuses |
| IEC 60095-4 AMD 1-1996 | 铅酸起动蓄电池组 第4部分:重型卡车用的蓄电池组尺寸 修改1 | Lead-acid starter batteries - Part 4: Dimensions of batteries for heavy trucks; Amendment 1 |
| IEC 60095-4-1989 | 铅酸起动蓄电池组 第4部分:重型卡车用的蓄电池组尺寸 | Lead-acid starter batteries; part 4: dimensions of batteries for heavy trucks |
| IEC 60310-2004 | 铁路设施.铁路车辆用牵引变压器和电感器 | Railway applications - Traction transformers and inductors on board rolling stock |
| IEC 60322-2001 | 铁路应用 机车车辆的电气设备 开敞式结构电力电阻器的规则 | Railway applications - Electric equipment for rolling stock - Rules for power resistors of open construction |
| IEC 60335-2-95 AMD 1-2005 | 修改件1.家用和类似用途电器.安全.第2-95部分:住宅用垂直移动汽车库门驱动装置的特殊要求 | Amendment 1 - Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use |
| IEC 60335-2-95 Edition 2.1-2005 | 家用和类似用途电器的安全.第2-95部分:住宅用垂直移动汽车库门驱动装置的特殊要求 | Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use |
| IEC 60335-2-95-2002 | 家用和类似用途电器的安全.第2-95部分:住宅用垂直移动汽车库门驱动装置的特殊要求 | Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use |
| IEC 60349-1 AMD 1-2002 | 电力牵引.铁路与道路车辆用旋转电机.第1部分:除电子交流器供电的交流电动机之外的旋转电机.修改1 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic convertor-fed alternating current motors; Amendment 1 |
| IEC 60349-1 Edition 1.1-2002 | 电力牵引.铁路与道路车辆用旋转电机.第1部分:除电子变流器供电的交流电动机之外的旋转电机 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic convertor-fed alternating current motors |
| IEC 60349-1-1999 | 电力牵引 铁路与道路车辆用旋转电机 第1部分:除电子变流器供电的交流电动机之外的旋转电机 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic convertor-fed alternating current motors |
| IEC 60349-2-2002 | 电力牵引.铁路与道路车辆用旋转电机.第2部分:电子变流器供电的交流电动机 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 2: Electronic convertor-fed alternating current motors |
| IEC 60357 AMD 1-2006 | 卤钨灯(非车辆用).性能规范.修改件1 | Tungsten halogen lamps (non-vehicle) - Performance specifications; Amendment 1 |
| IEC 60357-2002 | 卤钨灯(非车辆用).性能规范 | Tungsten halogen lamps (non-vehicle) - Performance specifications |
| IEC 60364-7-708-2007 | 低压电气设施.第7-708部分:特殊设施或场所的要求.旅游车停车场、野营停车场和类似场所 | Low-voltage electrical installations - Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations |
| IEC 60364-7-721-2007 | 低压电气装置.第7-721部分:特殊装置或位置的要求.居住挂车和电动居住挂车的电气装置 | Low-voltage electrical installations - Part 7-721: Requirements for special installations or locations - Electrical installations in caravans and motor caravans |
| IEC 60432-3 AMD 1-2005 | 修改件1.白炽灯.安全规范.第3部分:钨卤灯(非车用) | Amendment 1 - Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) |
| IEC 60432-3 Edition 1.1-2005 | 白炽灯.安全规范.第3部分:钨卤灯(非车用) | Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) |
| IEC 60432-3-2002 | 白炽灯.安全规范.第3部分:卤钨灯(非车用) | Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) |
| IEC 60494-1-2002 | 铁路设施.机车车辆.受电弓.特征和试验.第1部分:干线车辆用受电弓 | Railway applications - Rolling stock; Pantographs; Characteristics and tests - Part 1: Pantographs for mainline vehicles |
| IEC 60494-2-2002 | 铁路设施.机车车辆.导电弓架.特性和试验.第2部分:地下铁路和轻轨车辆用导电弓架 | Railway applications - Rolling stock; Pantographs; Characteristics and tests - Part 2: Pantographs for metros and light rail vehicles |
| IEC 60571 AMD 1-2006 | 铁路机车用电子设备.修改件1 | Electronic equipment used on rail vehicles; Amendment 1 |
| IEC 60571 Edition 2.1-2006 | 用于有轨机动车上的电子设备 | Electronic equipment used on rail vehicles |
| IEC 60571-1998 | 铁路车辆用电子设备 | Electronic equipment used on rail vehicles |
| IEC 60600-1979 | 坑口品位分析和矿车中放射性矿物分类用设备 | Equipment for minehead assay and sorting radioactive ores in containers |
| IEC 60721-3-5-1997 | 环境条件分类 第3部分:环境参数组及其严酷程度的分类分级 第5节:地面车辆上的设备 | Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 5: Ground vehicle installations |
| IEC 60809 AMD 1-1996 | 道路机动车辆用钨丝灯 尺寸、电及光的要求 修改1 | Filament lamps for road vehicles - Dimensional, electrical and luminous requirements; Amendment 1 |
| IEC 60809 AMD 2-2002 | 道路车辆用灯.尺寸、电和照明要求.修改2 | Lamps for road vehicles - Dimensional, electrical and luminous requirements; Amendment 2 |
| IEC 60809 AMD 3-2004 | 道路车辆用灯.尺寸、电及光的要求.修改件3 | Lamps for road vehicles - Dimensional, electrical and luminous requirements; Amendment 3 |
| IEC 60809 Edition 2.2-2002 | 道路车辆灯.尺寸,电气和亮度要求 | Lamps for road vehicles - Dimensional, electrical and luminous requirements |
| IEC 60809 Edition 2.3-2004 | 道路车辆用灯.尺寸、电及光的要求 | Lamps for road vehicles - Dimensional, electrical and luminous requirements |
| IEC 60809-1995 | 道路车辆用白炽灯.尺寸、电气和照明要求 | Filament lamps for road vehicles - Dimensional, electrical and luminous requirements |
| IEC 60810-2003 | 道路车辆用灯.性能要求 | Lamps for road vehicles - Performance requirements |
| IEC 60839-10-1-1995 | 报警系统 第10部分:道路车辆用报警系统 第1节:客车 | Alarm systems - Part 10: Alarm systems for road vehicles - Section 1: Passenger cars |
| IEC 61133-2006 | 铁道设施.铁道车辆.车辆组装后和运行前的整车试验 | Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service |
| IEC 61287-1-2005 | 铁路设施.安装在铁路机车上的电力变流器.第1部分:特性和试验方法 | Railway applications - Power convertors installed on board rolling stock - Part 1: Characteristics and test methods |
| IEC 61373-1999 | 铁路应用 机车车辆设备 冲击和振动试验 | Railway applications - Rolling stock equipment - Shock and vibration tests |
| IEC 61375-1-2007 | 电气铁路设备.列车总线.第1部分:列车通信网络 | Electric railway equipment - Train bus - Part 1: Train communication network |
| IEC 61375-2-2007 | 道路电气设备.列车总线.第2部分:列车通信网的合格测试 | Electric railway equipment - Train bus - Part 2: Train communication network conformance testing |
| IEC 61377-1-2006 | 铁路设施.铁路车辆.逆变器供电的交流电动机及其控制系统的联合试验 | Railway applications - Rolling stock - Part 1: Combined testing of inverter-fed alternating current motors and their control system |
| IEC 61377-2-2002 | 铁路设施.机车车辆.联合试验.第2部分:反向直流牵引电动机及其控制设备 | Railway applications - Rolling stock; Combined testing - Part 2: Chopper-fed direct current traction motors and their control |
| IEC 61377-3-2002 | 铁路设施.铁路车辆.第3部分:交流电动机,间接变流器及其他控制系统的联合检验 | Railway applications - Rolling stock - Part 3: Combined testing of alternating current motors, fed by an indirect convertor, and their control system |
| IEC 61851-1-2001 | 电动车辆充电系统 第1部分：一般要求 | Electric vehicle conductive charging system - Part 1: General requirements |
| IEC 61851-21-2001 | 电动车辆导电充电系统 第21部分：导电连接至交流/直流电源的电动车辆要求 | Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c./d.c. supply |
| IEC 61851-22-2001 | 电动车辆导电充电系统 第22部分：交流电动车辆充电站 | Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station |
| IEC 61881-1999 | 铁路应用 机车车辆设备 电力电子设备用电容器 | Railway applications - Rolling stock equipment - Capacitors for power electronics |
| IEC 61982-1-2006 | 电动道路车辆推进用蓄电池.第1部分:试验参数 | Secondary batteries for the propulsion of electric road vehicles - Part 1: Test parameters |
| IEC 61982-2-2002 | 电动道路车辆驱动用二次电池.第2部分:动态放电性能试验和动态耐久试验 | Secondary batteries for the propulsion of electric road vehicles - Part 2: Dynamic discharge performance test and dynamic endurance test |
| IEC 61982-3-2001 | 电动道路车辆的推进器用蓄电池组 第3部分：性能和寿命试验（交通适合的，市区用车辆） | Secondary batteries for the propulsion of electric road vehicles - Part 3: Performance and life testing (traffic compatible, urban use vehicles) |
| IEC 61991-2000 | 铁路应用 机车车辆 防电气危险的保护措施 | Railway applications - Rolling stock - Protective provisions against electrical hazards |
| IEC 62022-2004 | 由车辆运输的可再利用或不可再利用材料中γ辐射的控制和检测用已装好的监测器 | Installed monitors for the control and detection of gamma radiations contained in recyclable or non-recyclable materials transported by vehicles |
| IEC 62196-1-2004 | 插头、插座、车辆耦合器和引入线.电气车辆传导充电.第1部分:250A a.c 和400A d.c以下的电气车辆的充电 | Plugs, socket-outlets, vehicle couplers and vehicle inlets - Conductive charging of electric vehicles - Part 1: Charging of electric vehicles up to 250 A a.c. and 400 A d.c. |
| IEC 62209-1-2005 | 人暴露于手持和车载无线通信设备产生的射频场.人体模型、仪器和规程.第1部分:紧贴耳朵使用的手持设备(频率 | Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures - Part 1: Procedure to determine the specific absorption rate (SAR) for hand-held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz) |
| IEC 62236-3-1-2003 | 铁路设施.电磁兼容性.第3-1部分:铁道车辆.列车和成套车辆 | Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle |
| IEC 62236-3-2-2003 | 铁路设施.电磁兼容性.第3-2部分:铁道车辆.装置 | Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock; Apparatus |
| IEC 62236-4-2003 | 铁路设施.电磁兼容性.第4部分:铁道车辆.信号传输及远程通信装置的电磁辐射和抗扰性 | Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus |
| IEC 62236-5-2003 | 铁路设施.电磁兼容性.第5部分:铁道车辆.固定式电源设备和装置的辐射和抗扰性 | Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus |
| IEC 62427-2007 | 铁路设施.全部车辆和火车探测系统间的兼容性 | Railway applications - Compatibility between rolling stock and train detection systems |
| IEC/TR 60721-4-5 AMD 1-2003 | 环境条件分类.第4-5部分:IEC 60721-3的环境条件类别与IEC 60068的环境试验的相互关系及转换的指南.地面车辆 | Classification of environmental conditions - Part 4-5: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068; Ground vehicle installations; Amendment 1 |
| IEC/TR 60721-4-5 Edition 1.1-2003 | 环境条件分类.第4-5部分:IEC 60721-3的环境条件类别与IEC 60068的环境试验的相互关系及转换的指南.地面车辆 | Classification of environmental conditions - Part 4-5: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068; Ground vehicle installations |
| IEC/TR 60721-4-5-2001 | 环境条件分类 第4 5部分：IEC60721 3的环境条件类别与IEC60068的环境试验的相互关系及转换的指南 地面 | Classification of environmental conditions - Part 4-5: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068; Ground vehicle installations |
| IEC/TR 60783-1984 | 电动汽车的布线和连接器 | Wiring and connectors for electric road vehicles |
| IEC/TR 60784-1984 | 电动汽车用仪器仪表 | Instrumentation for electric road vehicles |
| IEC/TR 60785-1984 | 电动汽车用旋转电机 | Rotating machines for electric road vehicles |
| IEC/TR 60786-1984 | 电动汽车用控制器 | Controllers for electric road vehicles |
| IEC/TR2 60349-3-1995 | 电力牵引 铁路和道路车辆用旋转电机 第3部分:用组件损耗总和确定变流器供电的交流电动机的总损耗 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 3: Determination of the total losses of convertor-fed alternating current motors by summation of the component losses |
| IEC/TR2 61382-1-1996 | 电动汽车动力设备用镍镉可充电电池和蓄电池组 第1部分:动态放电性能试验(DPPT)和动态耐久性试验(DET) | Nickel/cadmium rechargeable cells and batteries for electric road vehicle propulsion applications - Part 1: Dynamic discharge performance test (DDPT) and dynamic endurance test (DET) |
| IEC/TS 61287-2-2001 | 安装在铁路机车车辆上的电力变流器 第2部分：增补技术信息 | Power convertors installed on board rolling stock - Part 2: Additional technical information |
| ISO 1005-1-1994 | 铁路车辆材料 第1部分:牵引和拖动的粗轧车轮 交货技术条件 | Railway rolling stock material - Part 1: Rough-rolled tyres for tractive and trailing stock; technical delivery conditions |
| ISO 1005-2-1986 | 铁路车辆材料 第2部分:牵引和拖动的车轮、轮体和轮箍 尺寸、平衡和组装要求 | Railway rolling stock material; Part 2 : Tyres, wheel centres and tyred wheels for tractive and trailing stock; Dimensional, balancing and assembly requirements |
| ISO 1005-3-1982 | 铁路车辆材料 第3部分:牵引和拖动的轮轴 质量要求 | Railway rolling stock material; Part 3 : Axles for tractive and trailing stock; Quality requirements |
| ISO 1005-4-1986 | 铁路车辆材料 第4部分:牵引和拖动的车轮的轧制或锻造的轮体 质量要求 | Railway rolling stock material; Part 4 : Rolled or forged wheel centres for tyred wheels for tractive and trailing stock; Quality requirements |
| ISO 1005-6-1994 | 铁路车辆材料 第6部分:牵引和拖动车轮实心轮 交货技术条件 | Railway rolling stock material - Part 6: Solid wheels for tractive and trailing stock; technical delivery conditions |
| ISO 1005-7-1982 | 铁路车辆材料 第7部分:牵引和拖动的轮副 质量要求 | Railway rolling stock material; Part 7 : Wheelsets for tractive and trailing stock; Quality requirements |
| ISO 1005-8-1986 | 铁路车辆材料 第8部分:牵引和拖动的车轮实心轮 尺寸和平衡要求 | Railway rolling stock material; Part 8 : Solid wheels for tractive and trailing stock; Dimensional and balancing requirements |
| ISO 1005-9-1986 | 铁路车辆材料 第9部分:牵引和拖动的轮轴 尺寸要求 | Railway rolling stock material; Part 9 : Axles for tractive and trailing stock; Dimensional requirements |
| ISO 10056-2001 | 机械振动 有轨车辆中乘客和乘务员全身振动的测量和分析 | Mechanical vibration - Measurement and analysis of whole-body vibration to which passengers and crew are exposed in railway vehicles |
| ISO 10190-1992 | 摩托车链条 特性和试验方法 | Motor cycle chains; characteristics and test methods |
| ISO 10191 AMD 1-1998 | 乘用车轮胎 检验轮胎负荷 实验室试验法 修改1 | Passenger car tyres - Verifying tyre capabilities - Laboratory test methods; Amendment 1 |
| ISO 10191-1995 | 乘用车轮胎 检验轮胎负荷 实验室试验法 | Passenger car tyres - Verifying tyre capabilities - Laboratory test methods |
| ISO 10230-1990 | 自行车 键槽后轴身和飞轮 配合尺寸 | Cycles; splined hub and sprocket; mating dimensions |
| ISO 10231-2003 | 摩托车轮胎.验证轮胎性能的试验方法 | Motorcycle tyres - Test methods for verifying tyre capabilities |
| ISO 10245-2-1994 | 起重机 限制器和指示器 第2部分:汽车起重机 | Cranes - Limiting and indicating devices - Part 2: Mobile cranes |
| ISO 10268-1993 | 土方机械 自卸车和拖式铲运机的减速器 性能试验 | Earth-moving machinery; retarders for dumpers and tractor-scrapers; performance tests |
| ISO 10326-1 AMD 1-2007 | 机械振动.车辆座椅振动评估用实验室方法.第1部分:基本要求.修改件1 | Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements; Amendment 1 |
| ISO 10326-1-1992 | 机械振动 评价车辆座椅振动的实验室方法 第1部分:基本要求 | Mechanical vibration; laboratory method for evaluating vehicle seat vibration; part 1: basic requirements |
| ISO 10326-2-2001 | 机械振动 车辆座位振动的实验室评价方法 第2部分：在铁路车辆中的应用 | Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 2: Application to railway vehicles |
| ISO 10333-4-2002 | 人员坠落救护系统.第4部分:垂直下落和滑动型下落救护车连接的垂直升降索道 | Personal fall-arrest systems - Part 4: Vertical rails and vertical lifelines incorporating a sliding-type fall arrester |
| ISO 10355-2004 | 轻便摩托车.照明和光信号装置的定位 | Mopeds - Positioning of lighting and light-signalling devices |
| ISO 10392-1992 | 双轴道路车辆 重力中心测定 | Road vehicles with two axles; determination of centre of gravity |
| ISO 1044-1993 | 工业车辆 电动车辆牵引用铅酸蓄电池 优先选用的电压 | Industrial trucks; lead-acid traction batteries for electric trucks; preferred voltages |
| ISO 10454-1993 | 载重汽车和公共汽车轮胎 检验轮胎负荷 实验室试验法 | Truck and bus tyres; verifying tyre capabilities; laboratory test methods |
| ISO 10455-1992 | 道路车辆 采用旋转式高压分电器的干燥点火线圈 | Road vehicles; dry ignition coils using rotating high-voltage distributor |
| ISO 10483-1-2004 | 道路车辆.智能动力开关.第1部分:高侧智能动力开关 | Road vehicles - Intelligent power switches - Part 1: High-side intelligent power switch |
| ISO 10483-2-1996 | 道路车辆 智能动力开关 第2部分:低侧智能动力开关 | Road vehicles - Intelligent power switches - Part 2: Low-side intelligent power switch |
| ISO 10486-1992 | 乘用车 轿车无线电设备识别号(CRIN) | Passenger cars; car radio identification number (CRIN) |
| ISO 10487-1-1992 | 乘用车收音机连接 第1部分:尺寸及一般要求 | Passenger car radio connections; part 1: dimensions and general requirements |
| ISO 10487-2-1995 | 乘用车 车用收音机连接 第2部分:性能要求 | Passenger cars - Connections for car radios - Part 2: Performance requirements |
| ISO 10499-1 Technical Corrigendum 1-1997 | 工业车辆轮胎和轮辋 充气轮胎轮辋用实心轮胎(米制系列) 名称、尺寸和标志 技术勘误1 | Industrial tyres and rims - Solid tyres (metric series) for pneumatic tyre rims - Part 1: Designation, dimensions and marking; Technical Corrigendum 1 |
| ISO 10499-1-1991 | 工业车辆轮胎和轮辋 充气轮胎轮辋用实心轮胎(米制系列) 名称、尺寸和标志 | Industrial tyres and rims - Solid tyres (metric series) for pneumatic tyre rims - Part 1: Designation, dimensions and marking |
| ISO 10499-2-1998 | 工业车辆轮胎和轮辋 充气轮胎轮辋用实心轮胎(米制系列) 第2部分:额定荷载值 | Industrial tyres and rims - Rubber solid tyres (metric series) for pneumatic tyre rims - Part 2: Load ratings |
| ISO 10500-1991 | 工业车辆轮胎和轮辋 圆柱和斜底橡胶实心轮胎(米制系列) 名称、尺寸和标志 | Industrial tyres and rims; cylindrical and conical base rubber solid tyres (metric series); designation, dimensions and marking |
| ISO 10521-1-2006 | 道路车辆.道路负荷.第1部分:在参照大气压状态测定道路负荷 | Road vehicles - Road load - Part 1: Determination under reference atmospheric conditions |
| ISO 10521-2-2006 | 道路车辆.道路负荷.第2部分:框架测力计再现 | Road vehicles - Road load - Part 2: Reproduction on chassis dynamometer |
| ISO 10525-1997 | 6m及6m以上长度平衡重式货运集装箱搬运车 附加稳定性试验 | Counterbalanced trucks handling freight containers of 6 m (20 ft) length and above - Additional stability tests |
| ISO 10542-1-2001 | 残疾人或行动障碍人用技术系统和设备 轮椅钳制和乘车人固定系统 第1部分：对所有系统的要求和试验方法 | Technical systems and aids for disabled or handicapped persons - Wheelchair tiedown and occupant-restraint systems - Part 1: Requirements and test methods for all systems |
| ISO 10542-2-2001 | 残疾人或行动障碍人用技术系统和设备 轮椅钳制和乘车人固定系统 第2部分：4点带型钳制系统 | Technical systems and aids for disabled or handicapped persons - Wheelchair tiedown and occupant-restraint systems - Part 2: Four-point strap-type tiedown systems |
| ISO 10542-3-2005 | 残疾人或行动障碍人用技术系统和辅助设备.轮椅钳制和乘车人固定系统.第3部分:对接式钳制系统 | Technical systems and aids for disabled or handicapped persons - Wheelchair tiedown and occupant-restraint systems - Part 3: Docking-type tiedown systems |
| ISO 10542-4-2004 | 残疾人或行动障碍人用技术系统和辅助设备.轮椅系固装置和乘车人约束系统.第4部分:夹紧式系固装置 | Technical systems and aids for disabled or handicapped persons - Wheelchair tiedown and occupant-restraint systems - Part 4: Clamp-type tiedown systems |
| ISO 10542-5-2004 | 残疾人或行动障碍人用技术设备和辅助装置.轮椅系固装置和乘车人安全束护系统.第5部分:专门轮椅设备 | Technical systems and aids for disabled or handicapped persons - Wheelchair tiedown and occupant-restraint systems - Part 5: Systems for specific wheelchairs |
| ISO 10570-2004 | 土方机械.铰接车架锁定装置.性能要求 | Earth-moving machinery - Articulated frame lock - Performance requirements |
| ISO 10597-2004 | 道路车辆.商用车辆用平面连接固定螺母.试验方法 | Road vehicles - Flat attachment fixing nuts for commercial vehicles - Test methods |
| ISO 10599-1-1992 | 轿车收音机 同轴天线连接器 第1部分:尺寸 | Car radios; coaxial aerial connectors; part 1: dimensions |
| ISO 10599-2 Technical Corrigendum 1-2005 | 轿车收音机.同轴天线连接器.第2部分:特征值、性能要求和试验.技术勘误1 | Car radios - Coaxial aerial connectors - Part 2: Characteristic values, performance requirements and tests; Technical Corrigendum 1 |
| ISO 10599-2-1997 | 轿车收音机 同轴天线连接器 第2部分:特征评定、性能要求和试验 | Car radios - Coaxial aerial connectors - Part 2: Characteristic values, performance requirements and tests |
| ISO 10604-1993 | 道路车辆 前照灯光束定位测量设备 | Road vehicles; measurement equipment for orientation of headlamp luminous beams |
| ISO 10605-2001 | 道路车辆 静电放电产生的电干扰的测试方法 | Road vehicles - Test methods for electrical disturbances from electrostatic discharge |
| ISO 10658-1996 | 工业车辆在由动力装置侧移载荷条件下堆垛作业 附加稳定性试验 | Industrial trucks operating in special conditions of stacking with load laterally displaced by powered devices - Additional stability test |
| ISO 1074-1991 | 平衡式叉车 稳定性试验 | Counterbalanced fork-lift trucks; stability tests |
| ISO 10815-1996 | 机械振动 列车通过铁路隧道时的振动测量 | Mechanical vibration - Measurement of vibration generated internally in railway tunnels by the passage of trains |
| ISO 10841-1996 | 航空器 大型飞机用餐饮服务车 功能要求 | Aircraft - Catering vehicle for large capacity aircraft - Functional requirements |
| ISO 10844-1994 | 声学 测量道路车辆发射的噪声用的试验车道的规范 | Acoustics - Specification of test tracks for the purpose of measuring noise emitted by road vehicles |
| ISO 10997-1996 | 乘用车 与可变形障碍壁的侧碰撞 实车试验 | Passenger vehicles - Side impact with deformable moving barrier - Full scale test |
| ISO 1102-2001 | 商用道路车辆 直径50mm的牵引杆连接器 互换性 | Commercial road vehicles - 50 mm drawbar eye - Interchangeability |
| ISO 1103-2007 | 道路车辆.旅居挂车和轻型挂车的连接球.尺寸 | Road vehicles - Coupling balls for caravans and light trailers - Dimensions |
| ISO 11041-1996 | 车间空气 砷、砷化合物悬浮粒子和三氧化二砷蒸气的测定 氢化法和原子吸收光谱法 | Workplace air - Determination of particulate arsenic and arsenic compounds and arsenic trioxide vapour - Method by hydride generation and atomic absorption spectrometry |
| ISO 11077-1993 | 航空航天 自行式除冰和防冰车 功能要求 | Aerospace; self-proppelled de-icing/anti-icing vehicles; functional requirements |
| ISO 11096-2002 | 道路车辆.行人防护.行人的大腿,腿和膝盖的冲击试验方法 | Road vehicles - Pedestrian protection - Impact test method for pedestrian thigh, leg and knee |
| ISO 11157-2005 | 道路车辆.制动衬片组件.惯性功率计试验方法 | Road vehicles - Brake lining assemblies - Inertia dynamometer test method |
| ISO 11174-1996 | 车间空气和镉化合物悬浮粒子的测定 燃烧和电热原子吸收光谱法 | Workplace air - Determination of particulate cadmium and cadmium compounds - Flame and electrothermal atomic absorption spectrometric method |
| ISO 11243-1994 | 自行车 自行车衣架 术语、分类和试验 | Cycles - Luggage carriers for bicycles - Concepts, classification and testing |
| ISO 11406 Technical Corrigendum 1-2005 | 商用道路车辆.带尾部连接器的牵引车辆和牵引杆式挂车间的机械连接.互换性.技术勘误1 | Commercial road vehicles - Mechanical coupling between towing vehicles with rear-mounted coupling and drawbar trailers - Interchangeability; Technical Corrigendum 1 |
| ISO 11406-2001 | 商用道路车辆 带尾部连接器的牵引车辆和牵引杆式挂车间的机械连接 互换性 | Commercial road vehicles - Mechanical coupling between towing vehicles with rear-mounted coupling and drawbar trailers - Interchangeability |
| ISO 11407-2004 | 商用道路车辆.尾部带向前和向下连接器的牵引车和中轴挂车间的机械连接.互换性 | Commercial road vehicles - Mechanical coupling between towing vehicles, with coupling mounted forward and below, and centre-axle trailers - Interchangeability |
| ISO 11425-1996 | 机动车液压转向装置用橡胶软管和软管组件 规范 | Rubber hoses and hose assemblies for automobile power-steering systems - Specification |
| ISO 11439-2000 | 气瓶 车上贮存机动车用天然气燃料用高压气瓶 | Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
| ISO 11446-2004 | 道路车辆.牵引车和受牵引车辆间的电气连接用连接器.具有12V标定电源电压的车辆用13极连接器 | Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 13-pole connectors for vehicles with 12 V nominal supply voltage |
| ISO 11451-1-2005 | 道路车辆.窄带辐射的电磁能量产生的电子干扰的车辆试验方法.第1部分:一般原则和术语 | Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General principles and terminology |
| ISO 11451-2-2005 | 道路车辆.窄带辐射的电磁能量产生的电干扰的车辆试验方法.第2部分:车外辐射源 | Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Off-vehicle radiation sources |
| ISO 11451-3-1994 | 道路车辆 窄带辐射的电磁能量产生的电干扰 车辆试验方法 第3部分:车载发射器模拟 | Road vehicles - Electrical disturbances by narrowband radiated electromagnetic energy - Vehicle test methods - Part 3: On-board transmitter simulation |
| ISO 11451-3-2007 | 道路车辆.窄带辐射电磁能量的电干扰车辆试验方法.第3部分:车载发射机模拟 | Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 3: On-board transmitter simulation |
| ISO 11451-4-2006 | 道路车辆.窄带辐射的电磁能量的电磁干扰车辆试验方法.第4部分:大电流量注入(BCI)法 | Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Bulk current injection (BCI) |
| ISO 11452-1-2005 | 道路车辆.窄带辐射的电磁能量产生的电干扰的部件试验方法.第1部分:总则和术语 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General principles and terminology |
| ISO 11452-2-2004 | 道路车辆.窄带辐射的电磁能量产生的电干扰的部件试验方法.第2部分:吸波屏蔽外壳 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Absorber-lined shielded enclosure |
| ISO 11452-3-2001 | 道路车辆 窄带辐射的电磁能量产生的电干扰 部件试验方法 第3部分:横向电磁模式(TEM)元件 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromgnetic energy - Part 3: Transverse electromagnetic (TEM) cell |
| ISO 11452-4-2005 | 道路车辆.窄带辐射电磁能量产生的电子干扰用部件试验方法.第4部分:大容量电流注入(BCI) | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Bulk current injection (BCI) |
| ISO 11452-5-2002 | 道路车辆.用窄带发射的电磁能量进行电干扰的元件试验方法.第5部分:微波带状线 | Road vehicles - Component test methods for electrical disturbances by narrowband radiated electromagnetic energy - Part 5: Stripline |
| ISO 11452-7-2003 | 道路车辆.窄带辐射的电磁能量产生的电干扰的部件试验方法.第7部分:直流射频(RF)能注入 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 7: Direct radio frequency (RF) power injection |
| ISO 11452-8-2007 | 道路车辆.窄带辐射电磁能量的电干扰元部件试验方法.第8部分:磁场抗扰性 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 8: Immunity to magnetic fields |
| ISO 11460-2007 | 两轮摩托车.照明和光信号装置的定位 | Two-wheeled motorcycles - Positioning of lighting and light-signalling devices |
| ISO 11486-2006 | 摩托车.底盘功率计测定滑行阻力的方法 | Motorcycles - Methods for setting running resistance on a chassis dynamometer |
| ISO 11519-1-1994 | 道路车辆 低速串行数据通信 第1部分:总则和定义 | Road vehicles - Low-speed serial data communication - Part 1: General and definitions |
| ISO 11519-3 AMD 1-1995 | 道路车辆 低速串行数据通信 第3部分:车辆局域网络(VAN) 修改1 | Road vehicles - Low-speed serial data communication - Part 3: Vehicle area network (VAN); Amendment 1 |
| ISO 11519-3-1994 | 道路车辆 低速串行数据通信 第3部分:车辆局域网络(VAN) | Road vehicles - Low-speed serial data communication - Part 3: Vehicle area network (VAN) |
| ISO 11530-1993 | 道路车辆 液压千斤顶 规范 | Road vehicles; hydraulic jacks; specifications |
| ISO 11555-1-2003 | 道路车辆.旅居挂车和轻型挂车用稳定装置.第1部分:整体式稳定杆 | Road vehicles - Stabilizing devices for caravans and light trailers - Part 1: Integrated stabilizers |
| ISO 11565 Technical Corrigendum 1-2007 | 道路车辆.火花塞.试验方法和要求.技术勘误1 | Road vehicles - Spark-plugs - Test methods and requirements; Technical Corrigendum 1 |
| ISO 11565-2006 | 道路车辆.火花塞.试验方法和要求 | Road vehicles - Spark-plugs - Test methods and requirements |
| ISO 11601-1999 | 推车式灭火器 性能和结构 | Wheeled fire extinguishers - Performance and construction |
| ISO 11602-1-2000 | 消防 手提式和推车式灭火器 第1部分:选择和安装 | Fire protection - Portable and wheeled fire extinguishers - Part 1: Selection and installation |
| ISO 11602-2-2000 | 消防 手提式和推车式灭火器 第2部分:检查和维修 | Fire protection - Portable and wheeled fire extinguishers - Part 2: Inspection and maintenance |
| ISO 11630-1997 | 起重机 车轮位置的测量 | Cranes - Measurement of wheel alignment |
| ISO 11748-1-2001 | 道路车辆 电气和电子系统的技术文件编制 第1部分：交换文件的内容 | Road vehicles - Technical documentation of electrical and electronic systems - Part 1: Content of exchanged documents |
| ISO 11748-2-2001 | 道路车辆 电气和电子系统的技术文件编制 第2部分：文件编制协议 | Road vehicles - Technical documentation of electrical and electronic systems - Part 2: Documentation agreement |
| ISO 11748-3-2002 | 道路车辆.电气和电子系统的技术文件.第3部分:应用实例 | Road vehicles - Technical documentation of electrical and electronic systems - Part 3: Application example |
| ISO 11749-1995 | 带传动 汽车工业用多楔带 疲劳试验 | Belt drive - V-ribbed belts for the automotive industry - Fatigue test |
| ISO 1176-1990 | 道路车辆 质量 词汇和代码 两种语言版 | Road vehicles; masses; vocabulary and codes |
| ISO 11783-13-2007 | 农业和林业用牵引车和机械.串行控制和通信数据网.第13部分:文件服务器 | Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 13: File server |
| ISO 11838-1997 | 摩托车和摩托车驾驶员运动学 词汇 | Motorcycle and motorcycle-rider kinematics - Vocabulary |
| ISO 11841-1-2000 | 道路车辆和内燃发动机 滤清器词汇 第1部分:滤清器和滤清器部件定义 两种语言版 | Road vehicles and internal combustion engines - Filter vocabulary - Part 1: Definitions of filters and filter components |
| ISO 11841-2-2000 | 道路车辆和内燃发动机 滤清器词汇 第2部分:滤清器及其部件特性的定义 两种语言版 | Road vehicles and internal combustion engines - Filter vocabulary - Part 2: Definitions of characteristics of filters and their components |
| ISO 1185-2003 | 道路车辆.牵引车和挂车之间电气连接用连接器.带24V标称电源电压的车辆用24N(标准)型7极连接器 | Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 24 N (normal) for vehicles with 24 V nominal supply voltage |
| ISO 11898-1 Technical Corrigendum 1-2006 | 道路车辆.控制器局域网络.第1部分:数据链层和物理信令.技术勘误1 | Road vehicles - Controller area network (CAN) - Part 1: Data link layer and physical signalling; Technical Corrigendum 1 |
| ISO 11898-1-2003 | 道路车辆.控制器局域网络.第1部分:数据链层和物理信令 | Road vehicles - Controller area network (CAN) - Part 1: Data link layer and physical signalling |
| ISO 11898-2-2003 | 道路车辆.控制器局域网络.第2部分:高速媒体存取单元 | Road vehicles - Controller area network (CAN) - Part 2: High-speed medium access unit |
| ISO 11898-3 Technical Corrigendum 1-2006 | 道路车辆.控制器局域网络(CAN).第3部分:低速、耐故障、依赖媒介的界面.技术勘误1 | Road vehicles - Controller area network (CAN) - Part 3: Low-speed, fault-tolerant, medium-dependent interface; Technical Corrigendum 1 |
| ISO 11898-3-2006 | 道路车辆.控制器局域网络(CAN).第3部分:低速、耐故障、依赖媒介的界面 | Road vehicles - Controller area network (CAN) - Part 3: Low-speed, fault-tolerant, medium-dependent interface |
| ISO 11898-4-2004 | 道路车辆.控制器局域网络.第4部分:时间触发通信 | Road vehicles - Controller area network (CAN) - Part 4: Time-triggered communication |
| ISO 11898-5-2007 | 道路车辆.控制器区域网络(CAN).第5部分:低功率模式的高速媒体访问单元 | Road vehicles - Controller area network (CAN) - Part 5: High-speed medium access unit with low-power mode |
| ISO 11992-1-2003 | 道路车辆.牵引车和拖挂车之间电气连接数字信息的交换.第1部分:物理层和数据链层 | Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 1: Physical and data-link layer |
| ISO 11992-2 AMD 1-2007 | 道路车辆.牵引车和拖挂车之间电连接数字信息的交换.第2部分:制动器和传动装置用应用层.修改件1 | Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 2: Application layer for brakes and running gear; Amendment 1 |
| ISO 11992-2-2003 | 道路车辆.牵引车和拖挂车之间电连接数字信息的交换.第2部分:制动和传动装置用应用层 | Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 2: Application layer for brakes and running gear |
| ISO 11992-3-2003 | 道路车辆.牵引车和拖挂车之间电连接数字信息的交换.第3部分:不包括制动和传动装置的设备用应用层 | Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 3: Application layer for equipment other than brakes and running gear |
| ISO 11992-4 Technical Corrigendum 1-2006 | 道路车辆.牵引车和拖挂车之间电连接数字信息的交换.第4部分:诊断.技术勘误1 | Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 4: Diagnostics; Technical Corrigendum 1 |
| ISO 11992-4-2005 | 道路车辆.牵引车和拖挂车之间电连接数字信息的交换.第4部分:诊断 | Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 4: Diagnostics |
| ISO 12021-1-1996 | 道路车辆 对侧向风的敏感度 第1部分:利用生风输入进行的开环试验方法 | Road vehicles - Sensitivity to lateral wind - Part 1: Open-loop test method using wind generator input |
| ISO 12046-1995 | 同步带传动 汽车用带 物理性能测定 | Synchronous belt drives - Automotive belts - Determination of physical properties |
| ISO 12097-1-2002 | 道路车辆.安全气球零部件.第1部分:词汇 | Road vehicles - Airbag components - Part 1: Vocabulary |
| ISO 12097-2-1996 | 道路车辆 气囊组件 第2部分:气囊组件的试验 | Road vehicles - Airbag components - Part 2: Testing of airbag modules |
| ISO 12097-3-2002 | 道路车辆.空气囊零部件.第3部分:充气机组合件的检验 | Road vehicles - Airbag components - Part 3: Testing of inflator assembly |
| ISO 12098-2004 | 公路车辆.牵引车和挂车之间电气连接用连接器.具有24V标称电源电压的车辆用15极连接器 | Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 15-pole connector for vehicles with 24 V nominal supply voltage |
| ISO 12103-1-1997 | 道路车辆 用于滤清器评价的粉尘试验 第1部分:亚利桑那州试验粉尘 | Road vehicles - Test dust for filter evaluation - Part 1: Arizona test dust |
| ISO 12103-2-1997 | 道路车辆 用于滤清器评价的粉尘试验 第2部分:氧化铝试验粉尘 | Road vehicles - Test dust for filter evaluation - Part 2: Aluminium oxide test dust |
| ISO 12140-1998 | 农业机械 农用挂车和被牵引设备牵引杆千斤顶 | Agricultural machinery - Agricultural trailers and trailed equipment - Drawbar jacks |
| ISO 12161-2006 | 道路车辆.电动机车和拖车耐摩擦制动系统.试验方法 | Road vehicles - Endurance braking systems of motor vehicles and towed vehicles - Test procedures |
| ISO 12166-1997 | 电阻焊设备 汽车工业中多点焊接用带一个副线圈的变压器的特殊规范 | Resistance welding equipment - Particular specifications applicable to transformers with one secondary winding for multi-spot welding, as used in the automobile industry |
| ISO 12214-2002 | 道路车辆.汽车手控装置的转向指示器 | Road vehicles - Direction-of-motion stereotypes for automotive hand controls |
| ISO 12215-4-2002 | 小艇.船体结构和尺寸.第4部分:车间和制造 | Small craft - Hull construction and scantlings - Part 4: Workshop and manufacturing |
| ISO 12353-1-2002 | 道路车辆.交通事故分析.第1部分:词汇 | Road vehicles - Traffic accident analysis - Part 1: Vocabulary |
| ISO 12353-2-2003 | 道路车辆.交通事故分析.冲击严酷度测量法的使用指南 | Road vehicles - Traffic accident analysis - Part 2: Guidelines for the use of impact severity measures |
| ISO 12357 Technical Corrigendum 1-2007 | 商用道路车辆.刚性牵引杆用牵引联结器和牵引杆挂钩孔.强度试验.技术勘误1 | Commercial road vehicles - Drawbar couplings and eyes for rigid drawbars - Strength tests; Technical Corrigendum 1 |
| ISO 12357-1-1999 | 商用道路车辆.刚性牵引杆用牵引装置和牵引杆挂钩孔.第1部分:一般货运中心轴挂车的强度试验 | Commercial road vehicles - Drawbar couplings and eyes for rigid drawbars - Part 1: Strength tests for general cargo centre-axle trailers |
| ISO 12357-1999 | 商用道路车辆 刚性牵引杆用牵引装置和牵引杆挂钩孔 强度试验 | Commercial road vehicles - Drawbar couplings and eyes for rigid drawbars - Strength tests |
| ISO 12357-2-2007 | 商用道路车辆.刚性牵引杆用牵引联结器和牵引杆挂钩孔.第2部分:专用强度试验 | Commercial road vehicles - Drawbar couplings and eyes for rigid drawbars - Part 2: Strength tests for special applications |
| ISO 12364-2001 | 两轮摩托车 防抱死系统（ABS） 试验和测量方法 | Two-wheeled motorcycles - Antilock braking systems (ABS) - Tests and measurement methods |
| ISO 12366-2001 | 两轮轻便摩托车 防抱死系统（ABS） 试验和测量方法 | Two-wheeled mopeds - Antilock braking systems (ABS) - Tests and measurement methods |
| ISO 12368-2001 | 农业车辆 拖挂车辆的机械钩挂式连接装置 试验方法和要求 | Agricultural vehicles - Mechanical hook-type connections on towing vehicles - Test methods and requirements |
| ISO 12667-1993 | 商用车辆和公共汽车 十字齿转动轴法兰、T型 | Commercial vehicles and buses; cross-tooth propeller shaft flanges, type T |
| ISO 13041-1-2004 | 数控立式车床和转向中心的试验条件.第1部分:有水平工件夹紧轴的机床的几何试验 | Test conditions for numerically controlled turning machines and turning centres - Part 1: Geometric tests for machines with a horizontal workholding spindle |
| ISO 13041-4-2004 | 数控立式车床和转向中心的试验条件.第4部分:线性和旋转轴定位的精确度和可重复性 | Test conditions for numerically controlled turning machines and turning centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes |
| ISO 13041-5-2006 | 数控车床和车削中心的试验条件.第5部分:进给量、速率排档和内插的精确度 | Test conditions for numerically controlled turning machines and turning centres - Part 5: Accuracy of feeds, speeds and interpolations |
| ISO 13041-6-2005 | 数控立式车床和转向中心的试验条件.第6部分:试验样本成品的精确度 | Test conditions for numerically controlled turning machines and turning centres - Part 6: Accuracy of a finished test piece |
| ISO 13041-7-2004 | 数控立式车床和转向中心的试验条件.第7部分:坐标平面上等高线特性评价 | Test conditions for numerically controlled turning machines and turning centres - Part 7: Evaluation of contouring performance in the coordinate planes |
| ISO 13041-8-2004 | 数控立式车床和转向中心的试验条件.第8部分:热变形的评价 | Test conditions for numerically controlled turning machines and turning centres - Part 8: Evaluation of thermal distortions |
| ISO 13215-1-2006 | 道路车辆.降低儿童约束系统的误用风险.第1部分:现场学习形式 | Road vehicles - Reduction of misuse risk of child restraint systems - Part 1: Forms for field studies |
| ISO 13215-2-1999 | 道路车辆 减少儿童约束系统的误用风险 第2部分:正确装配的要求和试验规程(薄板法) | Road vehicles - Reduction of misuse risk of child restraint systems - Part 2: Requirements and test procedures for correct installation (panel method) |
| ISO 13215-3-1999 | 道路车辆 减少儿童约束系统的误用风险 第3部分:使用误用模式和效果分析(MMEA)对误用的预测和评估 | Road vehicles - Reduction of misuse risk of child restraint systems - Part 3: Prediction and assessment of misuse by Misuse Mode and Effect Analysis (MMEA) |
| ISO 13216-1 AMD 1-2006 | 道路车辆.儿童约束系统在车内的固定点及主固定点的安装.第1部分:座椅座面与靠背之间的固定点及其连接.修改 | Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Part 1: Seat bight anchorages and attachments - Amendment 1: CRF reduced height specification |
| ISO 13216-1 AMD 3-2006 | 道路车辆.儿童限制器系统用车辆锚具和锚具附件.座位弯曲锚具及附件.修改件3.使用ISOFIX CRS的检测规范 | Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Part 1: Seat bight anchorages and attachments; Amendment 3: Specifications for the detection of use of ISOFIX CRS |
| ISO 13216-1-1999 | 道路车辆 儿童约束系统在车内的固定点及主固定点的安装 第1部分:座椅座面与靠背之间的固定点及其连接 | Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Part 1: Seat bight anchorages and attachments |
| ISO 13216-2-2004 | 道路车辆.儿童约束系统在车内的固定点及主固定点的安装.第2部分:顶部系留的固定点及其连接 | Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Part 2: Top tether anchorages and attachments |
| ISO 13216-3-2006 | 道路车辆.儿童约束系统在车内用固定件及固定件安装.第3部分:儿童固定范围和车内空间分类 | Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Part 3: Classification of child restraint dimensions and space in vehicle |
| ISO 13218-1998 | 道路车辆 儿童约束系统 涉及儿童乘客的事故报告格式 | Road vehicles - Child restraint systems - Report form for accidents involving child passengers |
| ISO 13232-1-2005 | 摩托车.用于摩托车驾驶员碰撞保护设备的研究性评估试验和分析程序.第1部分:定义、符号和一般考虑 | Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 1: Definitions, symbols and general considerations |
| ISO 13232-2-2005 | 摩托车.用于摩托车驾驶员碰撞保护设备的研究性评估试验和分析程序.第2部分:与事故数据有关的碰撞条件的定义 | Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 2: Definition of impact conditions in relation to accident data |
| ISO 13232-3-2005 | 摩托车.用于摩托车驾驶员碰撞保护设备的研究性评估试验和分析程序.第3部分:摩托车手仿真碰撞假人 | Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 3: Motorcyclist anthropometric impact dummy |
| ISO 13232-4-2005 | 摩托车.用于摩托车驾驶员碰撞保护设备的研究性评估试验和分析程序.第4部分:被测量的变量、仪器仪表和测量规 | Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 4: Variables to be measured, instrumentation and measurement procedures |
| ISO 13232-5-2005 | 摩托车.用于摩托车驾驶员碰撞保护设备的研究性评估试验和分析程序.第5部分:伤害值和风险/利益分析 | Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 5: Injury indices and risk/benefit analysis |
| ISO 13232-6-2005 | 摩托车.用于摩托车驾驶员碰撞保护设备的研究性评估试验和分析程序.第6部分:实车碰撞试验规程 | Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 6: Full-scale impact-test procedures |
| ISO 13232-7-2005 | 摩托车.用于摩托车驾驶员碰撞保护设备的研究性评估试验和分析程序.第7部分:摩托车碰撞试验的计算机模拟的标 | Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests |
| ISO 13232-8-2005 | 摩托车.用于摩托车驾驶员碰撞保护设备的研究性评估试验和分析程序.第8部分:文件和报告 | Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 8: Documentation and reports |
| ISO 13284-2003 | 叉车.叉形臂扩展部分和能自由伸缩的叉形臂.技术特性和强度要求 | Fork-lift trucks - Fork-arm extensions and telescopic fork arms - Technical characteristics and strength requirements |
| ISO 13328-2000 | 摩托车轮胎 轮胎滚动圆周长的测量方法 负载下的新轮胎 | Motorcycle tyres - Measurement of tyre rolling circumference - Loaded new tyres |
| ISO 13331-1995 | 道路车辆 摩托车燃料箱的开口和注油管 蒸发回收系统 | Road vehicles - Filler pipes and openings of motor vehicle fuel tanks - Vapour recovery system |
| ISO 13333-1994 | 土方机械 自卸车车身支承装置和司机室翻转支承装置 | Earth-moving machinery - Dumper body support and operator's cab tilt support devices |
| ISO 13459-1997 | 土方机械 自卸车 教练员座椅/工作空间 | Earth-moving machinery - Dumpers - Trainer seat/enclosure |
| ISO 13476 Technical Corrigendum 1-1999 | 道路车辆 点火线圈 电气特性和试验方法 技术勘误1 | Road vehicles - Ignition coils - Electrical characteristics and test methods; Technical Corrigendum 1 |
| ISO 13476-1997 | 道路车辆 点火线圈 电气特性和试验方法 | Road vehicles - Ignition coils - Electrical characteristics and test methods |
| ISO 13486-1-1999 | 道路车辆 液压制动系统 第1部分:双喇叭口管、螺纹孔、阳螺纹管接头和管座 | Road vehicles - Hydraulic braking systems - Part 1: Double-flare pipes, tapped holes, male fittings and tube seats |
| ISO 13556-1998 | 道路车辆 排气系统泄漏位置的确定和装置的技术规范 | Road vehicles - Localization of exhaust system leaks and equipment specifications |
| ISO 13562-1-2000 | 伸缩臂式工业车辆 第1部分:稳定性试验 | Industrial variable-reach trucks - Part 1: Stability tests |
| ISO 13562-2-2001 | 伸缩臂式工业车辆 第2部分:6m及以上长度货运集装箱叉车附加稳定性试验 | Industrial variable-reach trucks - Part 2: Additional stability tests for trucks handling freight containers of 6 m length and above |
| ISO 13563-1-2001 | 单边负载叉车 第1部分：稳定性试验 | Single side loading fork-lift trucks - Part 1: Stability tests |
| ISO 13563-2-2001 | 单边负载叉车 第2部分：搬运6m及以上长度集装箱的叉车的附加稳定性试验 | Single side loading fork-lift trucks - Part 2: Additional stability tests for trucks handling freight containers of 6 m length and above |
| ISO 13674-1-2003 | 道路车辆.沿中心驾驶的鉴定试验.第1部分:摇摆试验 | Road vehicles - Test method for the quantification of on-centre handling - Part 1: Weave test |
| ISO 13674-2-2006 | 道路车辆.沿中心驾驶的鉴定试验方法.第2部分:转向试验 | Road vehicles - Test method for the quantification of on-centre handling - Part 2: Transition test |
| ISO 13775-1-2000 | 汽车用热塑管和软管 第1部分:非燃料上应用 | Thermoplastic tubing and hoses for automotive use - Part 1: Non-fuel applications |
| ISO 13775-2-2000 | 汽车用热塑管和软管 第2部分:石油类燃料上应用 | Thermoplastic tubing and hoses for automotive use - Part 2: Petroleum-based-fuel applications |
| ISO 13984-1999 | 液压 道路车辆燃油系统界面 | Liquid hydrogen - Land vehicle fuelling system interface |
| ISO 13985-2006 | 液态氢.地面车辆燃油箱 | Liquid hydrogen - Land vehicle fuel tanks |
| ISO 14229-1-2006 | 道路车辆.统一诊断设备(UDS).第1部分:规范和要求 | Road vehicles - Unified diagnostic services (UDS) - Part 1: Specification and requirements |
| ISO 14229-2006 | 道路车辆.统一诊断设备(UDS).要求和规范 | Road vehicles - Unified diagnostic services (UDS) - Specification and requirements |
| ISO 14230-1-1999 | 道路车辆 诊断系统 关键词协议2000 第1部分:物理层 | Road vehicles - Diagnostic systems - Keyword protocol 2000 - Part 1: Physical layer |
| ISO 14230-2-1999 | 道路车辆 诊断系统 关键词协议2000 第2部分:数据链路层 | Road vehicles - Diagnostic systems - Keyword protocol 2000 - Part 2: Data link layer |
| ISO 14230-3-1999 | 道路车辆 诊断系统 关键词协议2000 第3部分:应用层 | Road vehicles - Diagnostic systems - Keyword protocol 2000 - Part 3: Application layer |
| ISO 14230-4-2000 | 道路车辆 诊断系统 关键词协议2000 第4部分:对与排放有关系统的要求 | Road vehicles - Diagnostic systems; Keyword protocol 2000 - Part 4: Requirements for emission-related systems |
| ISO 14400-2005 | 道路车辆.轮子和轮辋.使用、一般维护、安全要求和失效条件 | Road vehicles - Wheels and rims - Use, general maintenance and safety requirements and out-of-service conditions |
| ISO 14460 AMD 1-2002 | 赛车手用防护服.热防护和火焰防护.性能要求和试验方法.修改件1: 改进的弯曲试验 | Protective clothing for automobile racing drivers - Protection against heat and flame - Performance requirements and test methods; Amendment 1: Modified flexion test |
| ISO 14460-1999 | 赛车驾驶员的防护服 对热和火焰的防护 性能要求和试验方法 | Protective clothing for automobile racing drivers - Protection against heat and flame - Performance requirements and test methods |
| ISO 14469-1-2004 | 道路车辆.压缩天然气(CNG)加添油连接器.第1部分:20 MPa (200 bar)连接器 | Road vehicles - Compressed natural gas (CNG) refuelling connector - Part 1: 20 MPa (200 bar) connector |
| ISO 14469-3-2006 | 道路车辆.压缩天然气(CNG)填充连接器.第3部分:25 MPa (250 bar)连接器 | Road vehicles - Compressed natural gas (CNG) refuelling connector - Part 3: 25 MPa (250 bar) connector |
| ISO 14505-2 Technical Corrigendum 1-2007 | 热环境的人类工效学.车内热环境评定.第2部分:等效温度测定.技术勘误1 | Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Part 2: Determination of equivalent temperature; echnical Corrigendum 1 |
| ISO 14505-2-2006 | 热环境的人类工效学.车内热环境的评估.第2部分:等效温度的测定 | Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Part 2: Determination of equivalent temperature |
| ISO 14505-3-2006 | 热环境的人类工效学.车辆的热环境评估.第3部分:人用热舒适评估 | Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Part 3: Evaluation of thermal comfort using human subjects |
| ISO 14508-2006 | 道路车辆.火花塞.接线端子 | Road vehicles - Spark-plugs - Terminals |
| ISO 14512-1999 | 乘用车 在具有两个不同摩擦系数的路面上进行的正前方制动 开环试验方法 | Passenger cars - Straight-ahead braking on surfaces with split coefficient of friction - Open-loop test method |
| ISO 14513 Technical Corrigendum 1-2007 | 道路车辆.行人保护.头的撞击试验方法.技术勘误1 | Road vehicles - Pedestrian protection - Head impact test method; Technical Corrigendum 1 |
| ISO 14513-2006 | 道路车辆.行人防护.头部冲击试验方法 | Road vehicles - Pedestrian protection - Head impact test method |
| ISO 14572-2006 | 道路车辆.圆形屏蔽和非屏蔽60V和600V多芯铠装电缆.基本和高性能电缆的试验方法和要求 | Road vehicles - Round, screened and unscreened 60 V and 600 V multi-core sheathed cables - Test methods and requirements for basic and high-performance cables |
| ISO 14649-12-2005 | 工业自动化系统和集成.机械装置控制.计算机数控器用数据模型.第12部分:车削用过程数据 | Industrial automation systems and integration - Physical device control - Data model for computerized numerical controllers - Part 12: Process data for turning |
| ISO 14649-121-2005 | 工业自动化系统和集成.机械装置控制.计算机数控器用数据模型.第121部分:车床用工具 | Industrial automation systems and integration - Physical device control - Data model for computerized numerical controllers - Part 121: Tools for turning machines |
| ISO 14722-1998 | 轻便摩托车及其驾驶员运动学 词汇 | Moped and moped-rider kinematics - Vocabulary |
| ISO 14791-2000 | 道路车辆 重型商用列车和铰接式大客车 横向稳定性试验方法 | Road vehicles - Heavy commercial vehicle combinations and articulated buses - Lateral stability test methods |
| ISO 14792-2003 | 道路车辆.重型商用车辆和公共汽车.稳态循环试验 | Road vehicles - Heavy commercial vehicles and buses - Steady-state circular tests |
| ISO 14793-2003 | 道路车辆.重型商用车辆和汽车.横向瞬态响应试验方法 | Road vehicles - Heavy commercial vehicles and buses - Lateral transient response test methods |
| ISO 14794-2003 | 重型商用车辆和客车.转向制动.开环试验方法 | Heavy commercial vehicles and buses - Braking in a turn - Open-loop test methods |
| ISO 14814-2006 | 道路运输和交通远程信息处理.自动车辆和设备识别.参考体系结构和术语 | Road transport and traffic telematics - Automatic vehicle and equipment identification - Reference architecture and terminology |
| ISO 14815-2005 | 道路运输和交通远程信息处理.自动车辆和设备识别.系统规范 | Road transport and traffic telematics - Automatic vehicle and equipment identification - System specifications |
| ISO 14816-2005 | 道路运输和运输量远程信息处理.自动车辆和设备的识别.编号和数据结构 | Road transport and traffic telematics - Automatic vehicle and equipment identification - Numbering and data structure |
| ISO 14829-2002 | 货运集装箱.货运集装箱搬运用跨运车.稳定性的计算 | Freight containers - Straddle carriers for freight container handling - Calculation of stability |
| ISO 15005-2002 | 道路车辆.运输信息和控制系统的人类工效学特性.对话管理原则和一致性程序 | Road vehicles - Ergonomic aspects of transport information and control systems - Dialogue management principles and compliance procedures |
| ISO 15006-2004 | 道路车辆.交通信息和控制设备的人类工效学方面.车辆中声音信号表示规范和性能规程 | Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and compliance procedures for in-vehicle auditory presentation |
| ISO 15007-1-2002 | 道路车辆.与运输信息和控制系统有关的司机目视行为的测定.第1部分: 定义和参数 | Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 1: Definitions and parameters |
| ISO 15008-2003 | 道路车辆.传输信息和控制系统的人类工效学方面.车内目视显示规范和一致性规程 | Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and compliance procedures for in-vehicle visual presentation |
| ISO 15031-1-2001 | 道路车辆 车辆与发射相关诊断的外部设备之间的通信 第1部分：一般信息 | Road vehicles - Communication between vehicle and external equipment for emmissions-related diagnostics - Part 1: General information |
| ISO 15031-3-2004 | 道路车辆.排放相关的诊断用车辆和外部设备之间的通信.第3部分:诊断连接器和相关电路的规范及使用 | Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 3: Diagnostic connector and related electrical circuits, specification and use |
| ISO 15031-4-2005 | 道路车辆.排放相关的诊断用车辆和外部设备之间的通信.第4部分:外部试验设备 | Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 4: External test equipment |
| ISO 15031-5-2006 | 道路车辆.排放相关诊断用车辆和外部设备之间的通信.第5部分:排放相关的诊断服务 | Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 5: Emissions-related diagnostic services |
| ISO 15031-6-2005 | 道路车辆.车辆与发射相关诊断用外部设备间的通信.第6部分:故障诊断编码定义 | Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 6: Diagnostic trouble code definitions |
| ISO 15031-7-2001 | 道路车辆 车辆与发射相关诊断用外部设备间的通信 第7部分：数据链路的安全 | Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 7: Data link security |
| ISO 15037-1 Technical Corrigednum 1-2001 | 道路车辆 车辆动力学试验方法 第1部分:客车的一般条件 技术勘误1 | Road vehicles - Vehicle dynamics test methods - Part 1: General conditions for passenger cars - Technical Corrigendum 1 |
| ISO 15037-1-2006 | 道路车辆.车辆动态试验方法.第1部分:乘用车一般条件 | Road vehicles - Vehicle dynamics test methods - Part 1: General conditions for passenger cars |
| ISO 15037-2-2002 | 道路车辆.车辆动力学试验方法.第2部分:重型车辆和公共汽车的一般条件 | Road vehicles - Vehicle dynamics test methods - Part 2: General conditions for heavy vehicles and buses |
| ISO 15075-2003 | 运输信息和控制系统.车载导航系统.通信信息集要求 | Transport information and control systems - In-vehicle navigation systems - Communications message set requirements |
| ISO 15082-1999 | 道路车辆 刚性塑料安全玻璃材料的试验 | Road vehicles - Tests for rigid plastic safety glazing materials |
| ISO 15170-1-2001 | 道路车辆 带有插销和螺旋锁的4柱电连接器 第1部分：尺寸和应用等级 | Road vehicles - Four-pole electrical connectors with pins and twist lock - Part 1: Dimensions and classes of applications |
| ISO 15170-2-2001 | 道路车辆 带有插销和螺旋锁的4柱电连接器 第2部分：试验和要求 | Road vehicles - Four-pole electrical connectors with pins and twist lock - Part 2: Tests and requirements |
| ISO 15172-2005 | 道路车辆.轮子.螺母支承面强度试验 | Road vehicles - Wheels - Nut seat strength tests |
| ISO 15202-1-2000 | 车间空气 等离子体原子发射光谱法对颗粒物中金属及非金属的测定 第1部分:采样 | Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1: Sampling |
| ISO 15202-3-2004 | 车间空气.感应耦合等离子体原子发射光谱法对气载颗粒物中金属及类金属的测定.第3部分:分析 | Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 3: Analysis |
| ISO 15403-1-2006 | 天然气.汽车用压缩性燃料天然气.第1部分:质量标记 | Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 1: Designation of the quality |
| ISO 15500-1 AMD 1-2003 | 道路车辆.压缩天然气(CNG)燃料系统元部件.第1部分:一般要求和定义.修改1 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 1: General requirements and definitions; Amendment A1 |
| ISO 15500-1-2000 | 道路车辆 压缩天然气(CNG)燃料系统部件 第1部分:一般要求和定义 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 1: General requirements and definitions |
| ISO 15500-10-2001 | 道路车辆 压缩天然气(CNG)燃料系统部件 第10部分:气流调节器 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 10: Gas-flow adjuster |
| ISO 15500-11-2001 | 道路车辆 压缩天然气(CNG)燃料系统部件 第11部分:天然气/空气混合器 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 11: Gas/air mixer |
| ISO 15500-12-2001 | 道路车辆 压缩天然气(CNG)燃料系统部件 第12部分:减压阀 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 12: Pressure relief valve (PRV) |
| ISO 15500-13-2001 | 道路车辆 压缩天然气（CNG）燃料系统部件 第13部分：减压器（PRD） | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 13: Pressure relief device (PRD) |
| ISO 15500-14-2002 | 道路车辆.压缩天然气(CNG)燃料系统部件.第14部分:溢流阀 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 14: Excess flow valve |
| ISO 15500-15-2001 | 道路车辆 压缩天然气(CNG)燃料系统部件 第15部分:防气罩和通风软管 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 15: Gas-tight housing and ventilation hose |
| ISO 15500-16-2001 | 道路车辆 压缩天然气(CNG)燃料系统部件 第16部分:硬质燃料管线 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 16: Rigid fuel line |
| ISO 15500-17-2001 | 道路车辆 压缩天然气(CNG)燃料系统部件 第17部分:柔性燃料管线 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 17: Flexible fuel line |
| ISO 15500-18-2001 | 道路车辆 压缩天然气(CNG)燃料系统部件 第18部分:滤清器 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 18: Filter |
| ISO 15500-19-2001 | 道路车辆 压缩天然气(CNG)燃料系统部件 第19部分:配件 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 19: Fittings |
| ISO 15500-2-2001 | 道路车辆 压缩天然气（CNG）燃料系统部件 第2部分：性能和一般试验方法 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 2: Performance and general test methods |
| ISO 15500-20-2007 | 道路车辆.压缩天然气(CNG)燃料系统部件.第20部分:非不锈钢制的硬质燃料管线 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 20: Rigid fuel line in material other than stainless steel |
| ISO 15500-3-2001 | 道路车辆 压缩天然气(CNG)燃料系统部件 第3部分:防逆阀 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 3: Check valve |
| ISO 15500-4-2001 | 道路车辆 压缩天然气(CNG)燃料系统部件 第4部分:控阀 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 4: Manual valve |
| ISO 15500-5-2001 | 道路车辆 压缩天然气(CNG)燃料系统部件 第5部分:手控气缸阀 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 5: Manual cylinder valve |
| ISO 15500-6-2001 | 道路车辆 压缩天然气(CNG)燃料系统部件 第6部分:自动阀 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 6: Automatic valve |
| ISO 15500-7-2002 | 道路车辆.压缩天然气(CNG)燃料系统元部件.第7部分:气体喷射器 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 7: Gas injector |
| ISO 15500-8-2001 | 道路车辆 压缩天然气(CNG)燃料系统部件 第6部分:压力指示器 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 8: Pressure indicator |
| ISO 15500-9-2001 | 道路车辆 压缩天然气(CNG)燃料系统部件 第9部分:调压器 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 9: Pressure regulator |
| ISO 15501-1-2001 | 道路车辆 压缩天然气燃料系统 第1部分：安全要求 | Road vehicles - Compressed natural gas (CNG) fuel systems - Part 1: Safety requirements |
| ISO 15501-2-2001 | 道路车辆、压缩天然气(CNG)燃料系统.第2部分:试验方法 | Road vehicles - Compressed natural gas (CNG) fuel systems - Part 2: Test methods |
| ISO 15622-2002 | 运输信息和控制系统.自适配式车速控制系统.性能要求和试验程序 | Transport information and control systems - Adaptive Cruise Control systems - Performance requirements and test procedures |
| ISO 15623-2002 | 运输信息和控制系统.前方车辆碰撞警告系统.性能要求和试验程序 | Transport information and control systems - Forward vehicle collision warning systems - Performance requirements and test procedures |
| ISO 15763-2002 | 道路车辆.容许的最大总质量大于3.5吨公共汽车和营运车辆的报警系统 | Road vehicles - Alarm systems for buses and commercial vehicles of maximum authorized total mass greater than 3,5 t |
| ISO 15764-2004 | 道路车辆.扩展数据链接安全 | Road vehicles - Extended data link security |
| ISO 15765-1-2004 | 道路车辆.控制器区域网络(CAN)诊断.第1部分:一般信息 | Road vehicles - Diagnostics on Controller Area Networks (CAN) - Part 1: General information |
| ISO 15765-2-2004 | 道路车辆.控制器区域网络(CAN)的诊断.第2部分:网络层服务 | Road vehicles - Diagnostics on Controller Area Networks (CAN) - Part 2: Network layer services |
| ISO 15765-3-2004 | 道路车辆.控制器区域网络(CAN)的诊断.第3部分:统一标准诊断服务的实施 | Road vehicles - Diagnostics on Controller Area Networks (CAN) - Part 3: Implementation of unified diagnostic services (UDS on CAN) |
| ISO 15765-4-2005 | 道路车辆.控制器区域网络(CAN)诊断.第4部分:相关发射系统的要求 | Road vehicles - Diagnostics on Controller Area Networks (CAN) - Part 4: Requirements for emissions-related systems |
| ISO 15794-2001 | 双向和多向升降叉车 稳定性试验 | Bi-directional and multi-directional fork-lift trucks - Stability tests |
| ISO 15828-2004 | 道路车辆.斜撞试验规程 | Road vehicles - Offset frontal impact test procedure |
| ISO 15829-2004 | 道路车辆.利用杆冲击模拟评价有侧面气囊时乘客间相互作用的侧面冲击试验过程 | Road vehicles - Side impact test procedures for the evaluation of occupant interactions with side airbags by pole impact simulation |
| ISO 15830-1-2005 | 道路车辆.WorldSID 50th percentile侧面碰撞(试验)男性假人的设计和性能规范.第1部分:术语和基本原理 | Road vehicles - Design and performance specifications for the WorldSID 50th percentile male side-impact dummy - Part 1: Terminology and rationale |
| ISO 15830-2-2005 | 道路车辆.WorldSID 50th percentile侧面碰撞(试验)男性假人的设计和性能规范.第3部分:机械子系统 | Road vehicles - Design and performance specifications for the WorldSID 50th percentile male side-impact dummy - Part 2: Mechanical subsystems |
| ISO 15830-3-2005 | 道路车辆.WorldSID 50th percentile侧面碰撞(试验)男性假人的设计和性能规范.第3部分:电子子系统 | Road vehicles - Design and performance specifications for the WorldSID 50th percentile male side-impact dummy - Part 3: Electronic subsystems |
| ISO 15830-4-2005 | 道路车辆.WorldSID 50th percentile侧面碰撞(试验)男性假人的设计和性能规范.第4部分:用户手册 | Road vehicles - Design and performance specifications for the WorldSID 50th percentile male side impact dummy - Part 4: User's manual |
| ISO 1585-1992 | 道路车辆 发动机试验规程 净功率 | Road vehicles; engine test code; net power |
| ISO 15870-2000 | 机动工业车辆 安全标志和危险图示 一般原则 | Powered industrial trucks - Safety signs and hazard pictorials - General principles |
| ISO 15871-2000 | 工业车辆 集装箱搬运和抓斗臂操作用指示灯规范 | Industrial trucks - Specification for indicator lights for container handling and grappler arm operations |
| ISO 16121-1-2005 | 道路车辆.专线公共汽车驾驶员工作地点的人类功效学要求.第1部分:一般描述和基本要求 | Road vehicles - Ergonomic requirements for the driver's workplace in line-service buses - Part 1: General description, basic requirements |
| ISO 16121-2-2005 | 道路车辆.专线公共汽车驾驶员工地点的人类功效学要求.第2部分:能见度 | Road vehicles - Ergonomic requirements for the driver's workplace in line-service buses - Part 2: Visibility |
| ISO 16121-3-2005 | 道路车辆.专线公共汽车驾驶员工作地点的人类功效学要求.第3部分:信息设备和控制装置 | Road vehicles - Ergonomic requirements for the driver's workplace in line-service buses - Part 3: Information devices and controls |
| ISO 16121-4-2005 | 道路车辆.专线公共汽车驾驶员工作地点的人类功效学要求.第4部分:驾驶室环境 | Road vehicles - Ergonomic requirements for the driver's workplace in line-service buses - Part 4: Cabin environment |
| ISO 16183-2002 | 重型机车.未处理排气的气体排放测量和瞬变试验条件下用部分流体稀释系统测量粒子排放 | Heavy-duty engines - Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions |
| ISO 16185-2000 | 道路车辆 由尾气排放确定重型车辆的发动机系列 | Road vehicles - Engine families for certification of heavy-duty vehicles - Exhaust emissions |
| ISO 16200-2-2000 | 车间空气质量 采用溶剂解析/气相色谱法对挥发性有机物进行采样和分析 第2部分:扩散采样法 | Workplace air quality - Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography - Part 2: Diffusive sampling method |
| ISO 16232-1-2007 | 道路车辆.液压管路部件清洁度.第1部分:词汇 | Road vehicles - Cleanliness of components of fluid circuits - Part 1: Vocabulary |
| ISO 16232-10-2007 | 道路车辆.液压管路部件清洁度.第10部分:结果表达 | Road vehicles - Cleanliness of components of fluid circuits - Part 10: Expression of results |
| ISO 16232-2-2007 | 道路车辆.液压管路部件清洁度.第2部分:搅拌萃取污染物的方法 | Road vehicles - Cleanliness of components of fluid circuits - Part 2: Method of extraction of contaminants by agitation |
| ISO 16232-3-2007 | 道路车辆.液压管路部件清洁度.第3部分:压力漂洗萃取污染物的方法 | Road vehicles - Cleanliness of components of fluid circuits - Part 3: Method of extraction of contaminants by pressure rinsing |
| ISO 16232-4-2007 | 道路车辆.液压管路部件清洁度.第4部分:超声技术萃取污染物的方法 | Road vehicles - Cleanliness of components of fluid circuits - Part 4: Method of extraction of contaminants by ultrasonic techniques |
| ISO 16232-5-2007 | 道路车辆.液压管路部件清洁度.第5部分:在功能试验台上萃取污染物的方法 | Road vehicles - Cleanliness of components of fluid circuits - Part 5: Method of extraction of contaminants on functional test bench |
| ISO 16232-6-2007 | 道路车辆.液压管路部件清洁度.第6部分:重量分析法测量颗粒质量 | Road vehicles - Cleanliness of components of fluid circuits - Part 6: Particle mass determination by gravimetric analysis |
| ISO 16232-7-2007 | 道路车辆.液压管路部件清洁度.第7部分:显微分析测量粒径和计数 | Road vehicles - Cleanliness of components of fluid circuits - Part 7: Particle sizing and counting by microscopic analysis |
| ISO 16232-8-2007 | 道路车辆.液压管路部件清洁度.第8部分:显微分析测定颗粒性质 | Road vehicles - Cleanliness of components of fluid circuits - Part 8: Particle nature determination by microscopic analysis |
| ISO 16232-9-2007 | 道路车辆.液压管路部件清洁度.第9部分:用自动消光颗粒计数器测量粒径和计数 | Road vehicles - Cleanliness of components of fluid circuits - Part 9: Particle sizing and counting by automatic light extinction particle counter |
| ISO 16234-2006 | 重型商用车辆和客车.具有裂口摩擦系数的正向前方地面制动系统.开环试验方法 | Heavy commercial vehicles and buses - Straight-ahead braking on surfaces with split coefficient of friction - Open-loop test method |
| ISO 16246-2005 | 道路车辆.带平座和14 mm六角的M12 x 1.25火花塞及其气缸盖 | Road vehicles - M12 x 1,25 spark-plugs with flat seating and 14 mm hexagon and their cylinder head housing |
| ISO 16247-2004 | 道路车辆.排气系统泄漏的检测.氦试验方法和探测装置规范 | Road vehicles - Detection of exhaust system leaks - Helium test method and detection device specification |
| ISO 16333-2004 | 大型商用车辆和客车.稳态倾翻阈.倾斜台试验方法 | Heavy commercial vehicles and buses - Steady-state rollover threshold - Tilt-table test method |
| ISO 16673-2007 | 道路车辆.运输信息和控制系统的人类工效学方面.阻塞法评定使用车内系统产生的视觉需求 | Road vehicles - Ergonomic aspects of transport information and control systems - Occlusion method to assess visual demand due to the use of in-vehicle systems |
| ISO 16750-1-2006 | 道路车辆.电气和电子设备的环境条件和试验.第1部分:总则 | Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 1: General |
| ISO 16750-2-2006 | 道路车辆.电气和电子设备的环境条件和试验.第2部分:电力负载 | Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 2: Electrical loads |
| ISO 16750-3-2007 | 道路车辆.电气和电子设备的环境条件和测试.第3部分:机械载荷 | Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 3: Mechanical loads |
| ISO 16750-4-2006 | 道路车辆.电气和电子设备的环境条件和试验.第4部分:气候荷载 | Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads |
| ISO 16750-5-2003 | 道路车辆.电气和电子设备的环境条件和试验.第5部分:化学荷载 | Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 5: Chemical loads |
| ISO 16833-2006 | 道路车辆.轮子.径向和横向跳动的测量 | Road vehicles - Wheels - Measurement of radial and lateral run-out |
| ISO 16844-1 Technical Corrigendum 1-2005 | 道路车辆.速度记录器系统.第1部分:电连接器.技术勘误1 | Road vehicles - Tachograph systems - Part 1: Electrical connectors; Technical Corrigendum 1 |
| ISO 16844-1-2001 | 道路车辆 速度记录器系统 第1部分：电连接器 | Road vehicles - Tachograph systems - Part 1: Electrical connectors |
| ISO 16844-2-2004 | 道路车辆.转速表系统.第2部分:记录设备电子接口 | Road vehicles - Tachograph systems - Part 2: Recording unit, electrical interface |
| ISO 16844-3 Technical Corrigendum 1-2006 | 道路车辆.速度记录器系统.第3部分:动作传感器接口 | Road vehicles - Tachograph systems - Part 3: Motion sensor interface |
| ISO 16844-3-2004 | 道路车辆.速度记录器系统.第3部分:动作传感器接口 | Road vehicles - Tachograph systems - Part 3: Motion sensor interface |
| ISO 16844-4-2004 | 道路车辆.速度记录器系统.第4部分:CAN接口 | Road vehicles - Tachograph systems - Part 4: CAN interface |
| ISO 16844-5-2004 | 道路车辆.速度记录器系统.第5部分:安全的CAN接口 | Road vehicles - Tachograph systems - Part 5: Secured CAN interface |
| ISO 16844-6-2004 | 道路车辆.速度记录器系统.第6部分:诊断 | Road vehicles - Tachograph systems - Part 6: Diagnostics |
| ISO 16844-7-2004 | 道路车辆.速度记录器系统.第7部分:参数 | Road vehicles - Tachograph systems - Part 7: Parameters |
| ISO 16845-2004 | 道路车辆.控制器区域网(CAN).合格试验计划 | Road vehicles - Controller area network (CAN) - Conformance test plan |
| ISO 16850-2007 | 道路车辆.行人保护.儿童头部冲击试验方法 | Road vehicles - Pedestrian protection - Child head impact test method |
| ISO 16992-2006 | 乘用车轮胎.备用设备代替设备(SUSE) | Passenger car tyres - Spare unit substitutive equipment (SUSE) |
| ISO 17076-2006 | 皮革.物理和机械试验.汽车皮革的耐磨性测定 | Leather - Physical and mechanical tests - Determination of abrasion resistance of automotive leather |
| ISO 1708-1989 | 卧式车床验收条件 精度检验 | Acceptance conditions for general purpose parallel lathes; testing of the accuracy |
| ISO 1724-2003 | 道路车辆.牵引车和挂车之间电气连接用连接器.带12V标称电源电压的车辆用12N(标准)型7极连接器 | Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 12 N (normal) for vehicles with 12 V nominal supply voltage |
| ISO 1726 Technical Corrigendum 1-2007 | 道路车辆.拖拉机和半挂车之间的机械连接.互换性.技术勘误1 | Road vehicles - Mechanical coupling between tractors and semi-trailers - Interchangeability; Technical Corrigendum 1 |
| ISO 1726-2-2007 | 道路车辆.拖拉机和半挂车之间的机械连接.第2部分:低耦合拖拉机和高容量半挂车之间的互换性 | Road vehicles - Mechanical couplings between tractors and semi-trailers - Part 2: Interchangeability between low-coupling tractors and high-volume semi-trailers |
| ISO 1726-2000 | 道路车辆.拖拉机和半挂车之间的机械连接.一般货运用拖拉机和半挂车之间的互换性 | Road vehicles - Mechanical coupling between tractors and semi-trailers - Interchangeability between tractors and semi-trailers for general cargo |
| ISO 17268-2006 | 压缩氢路面车辆加油连接设备 | Compressed hydrogen surface vehicle refuelling connection devices |
| ISO 17269-2000 | 乘用车轮胎 测量滚动周长的方法 负载下的新轮胎 | Passenger car tyres - Methods for measuring rolling circumference - Loaded new tyres |
| ISO 1728-2006 | 道路车辆.机动车和挂车之间的气压制动连接装置.互换性 | Road vehicles - Pneumatic braking connections between motor vehicles and towed vehicles - Interchangeability |
| ISO 17287-2003 | 道路车辆.运输信息和控制系统的工效学.驾驶时适用性的评定规程 | Road vehicles - Ergonomic aspects of transport information and control systems - Procedure for assessing suitability for use while driving |
| ISO 17288-1-2002 | 乘用车.自由控制性能.第1部分:转向释放开环试验方法 | Passenger cars - Free-steer behaviour - Part 1: Steering-release open-loop test method |
| ISO 17288-2-2004 | 乘用车.无级变速性能.第2部分:转向脉冲开环试验方法 | Passenger cars - Free-steer behaviour - Part 2: Steering-pulse open-loop test method |
| ISO 17356-1-2005 | 道路车辆.嵌入式机动车装置用开放式界面.第1部分:一般结构、术语、定义和缩写术语 | Road vehicles - Open interface for embedded automotive applications - Part 1: General structure and terms, definitions and abbreviated terms |
| ISO 17356-2-2005 | 道路车辆.嵌入式机动车装置用开放式界面.第2部分:连接OS, COM和NM的OSEK/VDX规范 | Road vehicles - Open interface for embedded automotive applications - Part 2: OSEK/VDX specifications for binding OS, COM and NM |
| ISO 17356-3-2005 | 道路车辆.嵌入式机动车装置用开放式界面.第3部分:OSEK/VDX操作系统(OS) | Road vehicles - Open interface for embedded automotive applications - Part 3: OSEK/VDX Operating System (OS) |
| ISO 17356-4-2005 | 道路车辆.嵌入式机动车装置用开放式界面.第4部分:OSEK/VDX通讯(COM) | Road vehicles - Open interface for embedded automotive applications - Part 4: OSEK/VDX Communication (COM) |
| ISO 17356-5-2006 | 道路车辆.嵌入式机动车装置用开放式界面.第5部分:OSEK/VDX网络管理(NM) | Road vehicles - Open interface for embedded automotive applications - Part 5: OSEK/VDX Network Management (NM) |
| ISO 17356-6-2006 | 道路车辆.嵌入式机动车装置用开放式界面.第5部分:OSEK/VDX执行语言(OIL) | Road vehicles - Open interface for embedded automotive applications - Part 6: OSEK/VDX Implementation Language (OIL) |
| ISO 17373-2005 | 道路车辆.在低速尾部碰撞情况下带座椅/头枕设计的乘客头部和颈部相互影响评估的滑板碰撞试验过程 | Road vehicles - Sled test procedure for evaluating occupant head and neck interactions with seat/head restraint designs in low-speed rear-end impact |
| ISO 1756-1975 | 工业车辆 托盘尺寸 连接装置 | Industrial trucks; Dimensions of stillages; Connection gauge |
| ISO 17612-2004 | 农业和林业用牵引车和机械.操纵台用辅助动力传输连接器 | Tractors and machinery for agriculture and forestry - Auxiliary-power-transmission connector for the operator station |
| ISO 17733-2004 | 车间空气.汞和无机汞化合物的测定.低温蒸气原子吸收分光光度测定法或原子荧光分光光度测定法 | Workplace air - Determination of mercury and inorganic mercury compounds - Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry |
| ISO 17900-2002 | 农用挂车.带平衡装置的半悬挂式挂车.有效负载,垂直静止负载及轴载的测定 | Agricultural trailers - Balanced and semi-mounted trailers - Determination of payload, vertical static load and axle load |
| ISO 18164-2005 | 乘用车、卡车、公共汽车和摩托车轮胎.滚动阻力测量方法 | Passenger car, truck, bus and motorcycle tyres - Methods of measuring rolling resistance |
| ISO 18207-2006 | 道路车辆.3.5吨拖车.控制疲劳试验后联轴球焊接牵引支架 | Road vehicles - Trailers up to 3,5 t - Control of welded towing brackets for coupling ball after fatigue testing |
| ISO 19072-1-2007 | 道路车辆.点火装置、两通和三通连接接口.第1部分:袋形接口定义 | Road vehicles - Connection interface for pyrotechnic devices, two-way and three-way connections - Part 1: Pocket interface definition |
| ISO 19078-2006 | 储气瓶.气瓶安装检测和天然气作燃料机动车路上储存用高压储气瓶鉴定 | Gas cylinders - Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
| ISO 1919 Technical Corrigendum 1-1999 | 道路车辆 M14×1.25平座火花塞及气缸盖安装孔 技术勘误1 | Road vehicles - M14 × 1,25 spark-plugs with flat seating and their cylinder head housings; Technical corrigendum 1 |
| ISO 1919-1998 | 道路车辆 M14×1.25平座火花塞及气缸盖安装孔 | Road vehicules - M14 × 1,25 spark-plugs with flat seating and their cylinder head housings |
| ISO 19472 Technical Corrigendum 1-2006 | 林业机械.绞车.尺寸、性能和安全.技术勘误1 | Machinery for forestry - Winches - Dimensions, performance and safety; Technical Corrigendum 1 |
| ISO 19472-2006 | 林业用机械.绞车.尺寸、性能和安全 | Machinery for forestry - Winches - Dimensions, performance and safety |
| ISO 19812-2006 | 道路车辆.带16mm六角形平底座的M10 x 1小型火花塞及其汽缸盖外罩 | Road vehicles - M10 x 1 compact spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings |
| ISO 19813-2006 | 道路车辆.点火系统.火花塞点火线圈和石墨线圈上高压点火器的要求和试验方法 | Road vehicles - Ignition systems - Test methods and requirements for high voltage boots on plug-top coils and pencil coils |
| ISO 20019 Technical Corrigendum 1-2004 | 农用车辆.拖挂车辆的机械连接.连接环的尺寸.技术勘误 | Agricultural vehicles - Mechanical connections on towed vehicles - Dimensions for hitch rings; Technical Corrigendum 1 |
| ISO 20019-2001 | 农业车辆 被牵引车辆的机械联接装置 挂接环尺寸 | Agricultural vehicles - Mechanical connections on towed vehicles - Dimensions for hitch rings |
| ISO 20176-2006 | 道路车辆.H点机械(HPM II).H点测定的规范程序 | Road vehicles - H-point machine (HPM II) - Specifications and procedure for H-point determination |
| ISO 20566-2005 | 色漆和清漆.用实验室洗车台测定涂层系统耐划痕性 | Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory car-wash |
| ISO 20653-2006 | 道路车辆.防护等级(IP-编码).电子设备对外来物体、水和通道的防护 | Road vehicles - Degrees of protection (IP-Code) - Protection of electrical equipment against foreign objects, water and access |
| ISO 20683-1-2005 | 飞行器地面设备.带前起落架的无牵引杆的牵引车辆(TLTV)的设计、试验和维修.第1部分:干线飞行器 | Aircraft ground equipment - Design, test and maintenance for towbarless towing vehicles (TLTV) interfaced with nose-landing gear - Part 1: Main-line aircraft |
| ISO 20683-2-2004 | 航空地面设备.带前起落架的无牵引杆的牵引车辆(TLTV)的设计、试验和维护.第2部分:区域性飞行器 | Aircraft ground equipment - Design, test and maintenance for towbarless towing vehicles (TLTV) interfaced with nose-landing gear - Part 2: Regional aircraft |
| ISO 20826-2006 | 车载液化石油汽装置部件.容器 | Automotive LPG components - Containers |
| ISO 20828-2006 | 道路车辆.安全性认证管理 | Road vehicles - Security certificate management |
| ISO 20846-2004 | 石油制品.机动车燃料的硫含量的测定.紫外线荧光法 | Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method |
| ISO 20847-2004 | 石油制品.机动车燃料的硫含量的测定.能量分散X射线荧光光谱法 | Petroleum products - Determination of sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry |
| ISO 20884-2004 | 石油制品.机动车燃料的硫含量的测定.波长色散X射线荧光光谱法 | Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry |
| ISO 20957-10-2007 | 固定的训练器材.第10部分:带固定轮或无自由飞轮的训练自行车、附加特定安全要求和试验方法 | Stationary training equipment - Part 10: Exercise bicycles with a fixed wheel or without freewheel, additional specific safety requirements and test methods |
| ISO 20957-6-2005 | 固定式训练设备.第6部分:脚踏车附加的特殊安全要求和试验方法 | Stationary training equipment - Part 6: Treadmills, additional specific safety requirements and test methods |
| ISO 21069-1-2004 | 道路车辆.使用辊式制动试验器的最大容许总质量超过3.5 t的车辆上制动系统的试验.第1部分:气压制动系 | Road vehicles - Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester - Part 1: Pneumatic braking systems |
| ISO 21281-2005 | 自行式乘坐控制工业用货车的踏板结构和布局.踏板结构和布局的原则 | Construction and layout of pedals of self-propelled sit-down rider-controlled industrial trucks - Rules for the construction and layout of pedals |
| ISO 21308-2-2006 | 道路车辆.底盘和车身制造商(BEP)之间的产品数据交换.第2部分:尺寸车体交换参数 | Road vehicles - Product data exchange between chassis and bodywork manufacturers (BEP) - Part 2: Dimensional bodywork exchange parameters |
| ISO 21308-3-2007 | 道路车辆.底盘和车身制造商(BEP)之间的产品数据交换.第3部分:通用质量管理交换参数 | Road vehicles - Product data exchange between chassis and bodywork manufacturers (BEP) - Part 3: General, mass and administrative exchange parameters |
| ISO 21750-2006 | 道路车辆.有关增进轮胎充气压力监控的安全 | Road vehicles - Safety enhancement in conjunction with tyre inflation pressure monitoring |
| ISO 21848-2005 | 道路车辆.42V电源电压的电气和电子设备.电荷载 | Road vehicles - Electrical and electronic equipment for a supply voltage of 42 V - Electrical loads |
| ISO 21994-2007 | 乘用车.防抱死制动系统(ABS)直线制动停车距离.开环试验方法 | Passenger cars - Stopping distance at straight-line braking with ABS - Open-loop test method |
| ISO 22168-2006 | 道路车辆.影响光源光色的涂层的保持试验.试验方法 | Road vehicles - Holding test of coatings influencing the colour of light emitted by light source(s) - Test methods |
| ISO 22628-2002 | 道路车辆.可循环和可恢复性.计算方法 | Road vehicles - Recyclability and recoverability - Calculation method |
| ISO 22896-2006 | 道路车辆.使用者安全系统开发和传感器总线 | Road vehicles - Deployment and sensor bus for occupant safety systems |
| ISO 22902-1-2006 | 道路车辆.车用多媒体接口.第1部分:通用技术综述 | Road vehicles - Automotive multimedia interface - Part 1: General technical overview |
| ISO 22902-2-2006 | 道路车辆.车用多媒体接口.第2部分:使用情况 | Road vehicles - Automotive multimedia interface - Part 2: Use cases |
| ISO 22902-3-2006 | 道路车辆.车用多媒体接口.第3部分:系统要求 | Road vehicles - Automotive multimedia interface - Part 3: System requirements |
| ISO 22902-4-2006 | 道路车辆.车用多媒体接口.第4部分:车辆接口准入的网络协议要求 | Road vehicles - Automotive multimedia interface - Part 4: Network protocol requirements for vehicle interface access |
| ISO 22902-5-2006 | 道路车辆.车用多媒体接口.第5部分:公共电文集 | Road vehicles - Automotive multimedia interface - Part 5: Common message set |
| ISO 22902-6-2006 | 道路车辆.车用多媒体接口.第6部分:车辆接口要求 | Road vehicles - Automotive multimedia interface - Part 6: Vehicle interface requirements |
| ISO 22902-7-2006 | 道路车辆.车用多媒体接口.第7部分:物理规范 | Road vehicles - Automotive multimedia interface - Part 7: Physical specification |
| ISO 22977-2005 | 道路车辆.带14 mm十二角平座及其气缸盖的M12 1,25火花塞 | Road vehicles - M12 × 1,25 spark-plugs with flat seating and 14 mm bi-hexagon and their cylinder head housing |
| ISO 23273-1-2006 | 燃料电池道路车辆.安全规范.第1部分:车辆功能安全 | Fuel cell road vehicles - Safety specifications - Part 1: Vehicle functional safety |
| ISO 23273-2-2006 | 燃料电池道路车辆.安全规范.第2部分:以压缩氢为车辆燃料的防止氢爆炸的保护 | Fuel cell road vehicles - Safety specifications - Part 2: Protection against hydrogen hazards for vehicles fuelled with compressed hydrogen |
| ISO 23273-3-2006 | 燃料电池道路车辆.第3部分:人员电击防护 | Fuel cell road vehicles - Safety specifications - Part 3: Protection of persons against electric shock |
| ISO 23274-2007 | 混合动力道路车辆.废气排放和燃料消耗测量.非外表可充电车辆 | Hybrid-electric road vehicles - Exhaust emissions and fuel consumption measurements - Non-externally chargeable vehicles |
| ISO 2328-2007 | 叉车.钩接式叉形臂和叉形臂托架.安装尺寸 | Fork-lift trucks - Hook-on type fork arms and fork arm carriages - Mounting dimensions |
| ISO 2330-2002 | 叉式起重车.叉臂.技术特性和试验 | Fork-lift trucks - Fork arms - Technical characteristics and testing |
| ISO 2331-1974 | 叉车 挂钩型货叉 术语 三种语言版 | Fork lift trucks; Hook-on type fork arms; Vocabulary Trilingual edition |
| ISO 2344-1998 | 道路车辆 M14×1.25锥座火花塞及气缸盖安装孔 | Road vehicles - M14 × 1,25 spark-plugs with conical seating and their cylinder head housings |
| ISO 2345-1994 | 道路车辆 M18×1.5锥座火花塞及气缸盖安装孔 | Road vehicles - M18×1,5 spark-plugs with conical seating and their cylinder head housing |
| ISO 2346-2001 | 道路车辆 M14×1.25矮型平座火花塞及气缸盖安装孔 | Road vehicles - M14 × 1,25 compact spark-plugs with flat seating and 19 mm hexagon and their cylinder head housing |
| ISO 2347-1994 | 道路车辆 M14×1.25矮型锥座火花塞及气缸盖安装孔 | Road vehicles - M14×1,25 compact spark-plugs with conical seating and their cylinder head housing |
| ISO 23671-2006 | 乘用车轮胎.测量相对湿度下夹具性能的办法.负载下的新轮胎 | Passenger car tyres - Method for measuring relative wet grip performance - Loaded new tyres |
| ISO 241-1994 | 车刀和刨刀的刀柄 截面的类型和尺寸 | Shanks for turning and planing tools - Shapes and dimensions of the section |
| ISO 24135-1-2006 | 工业用货车.司机固定系统.第1部分:围式座位皮带 | Industrial trucks - Specifications and test methods for operator restraint systems - Part 1: Lap-type seat belts |
| ISO 2416-1992 | 乘用车 质量分布 | Passenger cars; mass distribution |
| ISO 242-1975 | 硬质合金焊接车刀片 | Carbide tips for brazing on turning tools |
| ISO 24254-2007 | 润滑剂、工业用油和相关产品(L级).E族(内燃机油).四冲程循环摩托车汽油发动机和相关动力传动系统用油的规范 | Lubricants, industrial oils and related products (class L) - Family E (internal combustion engine oils) - Specifications for oils for use in four-stroke cycle motorcycle gasoline engines and associated drivetrains (categories EMA and EMB) |
| ISO 243-1975 | 硬质合金车刀 外圆车刀 | Turning tools with carbide tips; External tools |
| ISO 24347-2005 | 农用车辆.被牵引和牵引车辆间的机械连接.球状联结器设备尺寸(80mm) | Agricultural vehicles - Mechanical connections between towed and towing vehicles - Dimensions of ball-type coupling device (80 mm) |
| ISO 24535-2007 | 智能运输系统.自动车辆识别.基本电子注册识别(基本ERI) | Intelligent transport systems - Automatic vehicle identification - Basic electronic registration identification (Basic ERI) |
| ISO 2534-1998 | 道路车辆 发动机试验规程 总功率 | Road vehicles - Engine test code - Gross power |
| ISO 2575 AMD 1-2005 | 道路车辆.操纵件、指示器和信号装置的符号.修改件1 | Road vehicles - Symbols for controls, indicators and tell-tales; Amendment 1 |
| ISO 2575 AMD 2-2006 | 道路车辆.控制装置、指示器和信号装置用符号.修改件2 | Road vehicles - Symbols for controls, indicators and tell-tales; Amendment 2 |
| ISO 2575-2004 | 道路车辆.操纵件、指示器和信号装置的符号 | Road vehicles - Symbols for controls, indicators and tell-tales |
| ISO 2704-1998 | 道路车辆.M10×1平座火花塞及气缸盖安装孔 | Road vehicles - M10 × 1 spark-plugs with flat seating and their cylinder head housings |
| ISO 2705-2006 | 道路车辆.M12×1.25平座火花塞及其气缸盖安装孔 | Road vehicles - M12 x 1,25 spark-plugs with flat seating and their cylinder head housings |
| ISO 2790-2004 | 带传动.汽车工业用V带及带轮.尺寸 | Belt drives - V-belts for the automotive industry and corresponding pulleys - Dimensions |
| ISO 2929-2002 | 油槽车排吸油用橡胶软管和软管组件.规范 | Rubber hoses and hose assemblies for bulk fuel delivery by truck - Specification |
| ISO 2958-1973 | 道路车辆 乘用车的外部保护 | Road vehicles; Exterior protection for passenger cars |
| ISO 298-1973 | 机床 车床顶尖 互换性尺寸 | Machine tools; Lathe centres; Sizes for interchangeability |
| ISO 3006-2005 | 道路车辆.道路用乘用车车轮.试验方法 | Road vehicles - Passenger car wheels for road use - Test methods |
| ISO 303 Technical Corrigendum 1-2003 | 道路车辆.汽车及其挂车的照明和光信号装置的安装.技术勘误1 | Road vehicles - Installation of lighting and light signalling devices for motor vehicles and their trailers; Technical Corrigendum 1 |
| ISO 303-2002 | 道路车辆.汽车及其挂车的照明和光信号装置的安装 | Road vehicles - Installation of lighting and light signalling devices for motor vehicles and their trailers |
| ISO 3078-1987 | 造船 起货绞车 | Shipbuilding; Cargo winches |
| ISO 3095-2005 | 铁路设施.声学.有轨车辆发出的噪音的测量 | Railway applications - Acoustics - Measurement of noise emitted by railbound vehicles |
| ISO 3184 Technical Corrigendum 1-2000 | 前移式和插腿式叉车 稳定性试验 技术勘误1 | Reach and straddle fork-lift trucks - Stability tests; Corrigendum 1 |
| ISO 3184-1998 | 前移式和插腿式叉车 稳定性试验 | Reach and straddle fork-lift trucks - Stability tests |
| ISO 3208-1974 | 道路车辆 乘用车内部凸出物的评价 | Road vehicles; Evaluation of protrusions inside passenger cars |
| ISO 3265-1974 | 松散物料连续搬运设备 铁路货车翻车机(回转式、侧卸式和端部卸载式) 安全规则 | Continuous mechanical handling equipment for loose bulk materials; Wagon tipplers handling rail-borne wagons (rotary, side discharge and end discharge); Safety code |
| ISO 3267-1991 | 道路车辆 前照灯清洗器 | Road vehicles; headlamp cleaners |
| ISO 3285-1986 | 道路车辆.点火线圈安装托架 | Road vehicles; Ignition coil mounting brackets |
| ISO 3287-1999 | 机动工业车辆 操作控制符号和其他图示符号 | Powered industrial trucks - Symbols for operator controls and other displays |
| ISO 337 Technical Corrigendum 1-1990 | 道路车辆 半挂车牵引座50号连接销 基本尺寸和装配尺寸、互换性尺寸 技术勘误1 | Road vehicles; 50 semi-trailer fifth wheel coupling pin; basic and mounting/interchangeability dimensions; technical corrigendum 1 |
| ISO 337-1981 | 道路车辆 半挂车牵引座50号连接销 基本尺寸和装配尺寸、互换性尺寸 | Road vehicles; 50 semi-trailer fifth wheel coupling pin; Basic and mounting/ interchangeability dimensions |
| ISO 3381-2005 | 铁路设施.声学.有轨车辆内部噪音的测量 | Railway applications - Acoustics - Measurement of noise inside railbound vehicles |
| ISO 3409-1975 | 乘用车 脚操纵件的横向空间 | Passenger cars; Lateral spacing of foot controls |
| ISO 3412-1992 | 道路车辆 屏蔽和防水火花塞及其连接 1A和1B型 | Road vehicles; screened and waterproof spark-plugs and their connections; types 1A and 1B |
| ISO 3468-1989 | 乘用车 风挡玻璃除霜系统 试验方法 | Passenger cars; windscreen defrosting systms; test methods |
| ISO 3469 AMD 1-2006 | 乘用车.风挡玻璃清洗系统.试验方法.修改件1 | Passenger cars - Windscreen washing systems - Test methods; Amendment 1 |
| ISO 3469-1989 | 乘用车 风挡玻璃清洗系统 试验方法 | Passenger cars; windscreen washing systems; test methods |
| ISO 3470-1989 | 乘用车 风挡玻璃除雾系统 试验方法 | Passenger cars - Windscreen demisting systems - Test method |
| ISO 3471 AMD 1-1997 | 土方机械 翻车保护结构 实验室试验和性能要求 修改1 | Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements; Amendment 1 |
| ISO 3471 Technical Corrigendum 1-2000 | 土方机械 翻车保护结构 实验室试验和性能要求 技术勘误1 | Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements; Technical Corrigendum 1 |
| ISO 3471-1994 | 土方机械 翻车保护结构 实验室试验和性能要求 | Earth-moving machinery; roll-over protective structures; laboratory tests and performance requirements |
| ISO 3536-1999 | 道路车辆 安全玻璃材料 词汇 两种语言版 | Road vehicles - Safety glazing materials - Vocabulary |
| ISO 3537-1999 | 道路车辆 安全玻璃材料 力学性能试验 | Road vehicles - Safety glazing materials - Mechanical tests |
| ISO 3538-1997 | 道路车辆 安全玻璃材料 光学性能试验方法 | Road vehicles - Safety glazing materials - Test methods for optical properties |
| ISO 3539-1975 | 道路车辆 8型和10型带有法兰的喷油器及9型和11型带紧固平面的喷油器 | Road vehicles; Injection nozzle holder with body, types 8 and 10, and injection nozzle holder with fixing flats, types 9 and 11 |
| ISO 3553-1-1987 | 道路车辆 点火线圈和分电器的高压接头 第1部分:插座型 | Road vehicles; High-tension connections for ignition coils and distributors; Part 1 : Socket-type |
| ISO 3553-2-1997 | 道路车辆 点火线圈和分电器的高压接头 第2部分:插头型 | Road vehicles - High-tension connectors for ignition coils and distributors - Part 2: Plug-types |
| ISO 3559-1976 | 道路车辆 装在机动车及其挂车上的灯具的工作电压 | Road vehicles; Working voltages for lights fitted to motor vehicles and to their trailers |
| ISO 3560-2001 | 道路车辆 正面固定障碍壁或柱体碰撞试验程序 | Road vehicles - Frontal fixed barrier or pole impact test procedures |
| ISO 3583-1984 | 道路车辆 气压制动装置的压力试验连接 | Road vehicles; Pressure test connection for compressed-air pneumatic braking equipment |
| ISO 3584-2001 | 道路车辆 牵引杆连接 互换性 | Road vehicles - Drawbar couplings - Interchangeability |
| ISO 362-1-2007 | 加速道路车辆发出噪声的测量.工程法.第1部分:M和N分类 | Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 1: M and N categories |
| ISO 362-1998 | 声学 加速中的道路车辆发射的噪声测量 工程法 | Acoustics - Measurement of noise emitted by accelerating road vehicles - Engineering method |
| ISO 3652-1975 | 造船 内河船舶 绳索卷车 | Shipbuilding; Inland vessels; Rope reels |
| ISO 3655-1986 | 带固定式或移动式工作台的单柱或双柱立式车镗床验收条件 总论和精度检验 | Acceptance conditions for vertical turning and boring lathes with one or two columns and a single fixed or movable table; General introduction and testing of the accuracy |
| ISO 3685-1993 | 单刃车刀的寿命试验 | Tool-life testing with single-point turning tools |
| ISO 3691 AMD 1-1983 | 机动工业车辆 安全规则 修改1 | Powered industrial trucks; safety code; amendment 1 |
| ISO 3691-1980 | 机动工业车辆 安全规则 | Powered industrial trucks; Safety code |
| ISO 3731-2003 | 道路车辆.牵引车和挂车之间电气连接用连接器.带24V标称电源电压的车辆用24S(补充)型7极连接器 | Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 24 S (supplementary) for vehicles with 24 V nominal supply voltage |
| ISO 3732-2003 | 道路车辆.牵引车和挂车之间电气连接用连接器.带12V标称电源电压的车辆用12S(补充)型7极连接器 | Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 12 S (supplementary) for vehicles with 12 V nominal supply voltage |
| ISO 3739-2-1992 | 工业车辆轮胎和轮辋.第2部分:5°或平底轮辋的充气轮胎(米制系列).额定负荷 | Industrial tyres and rims; part 2: pneumatic tyres (metric series) on 5° tapered or flat base rims; load ratings |
| ISO 3739-3-1995 | 工业车辆轮胎和轮辋 第3部分:轮辋 | Industrial tyres and rims - Part 3: Rims |
| ISO 3779-1983 | 道路车辆 车辆识别号码(VIN) 内容和结构 | Road vehicles; Vehicle identification number (VIN); Content and structure |
| ISO 3780-1983 | 道路车辆 世界制造厂商识别代码(WMI) | Road vehicles; World manufacturer identifier (WMI) code |
| ISO 3784-1976 | 道路车辆 碰撞试验中冲击速度的测量 | Road vehicles; Measurement of impact velocity in collision tests |
| ISO 3795-1989 | 农林用道路车辆、拖拉机和机械 内部材料燃烧性能的测定 | Road vehicles, and tractors and machinery for agriculture and forestry - Determination of burning behaviour of interior materials |
| ISO 3803-1984 | 道路车辆 制动装置的液压试验连接 | Road vehicles; Hydraulic pressure test connection for braking equipment |
| ISO 3808-2002 | 道路车辆.无屏蔽高电压点火电缆.总规范、试验方法和要求 | Road vehicles - Unscreened high-voltage ignition cables - General specifications, test methods and requirements |
| ISO 3833-1977 | 道路车辆 类型 术语和定义 | Road vehicles; Types; Terms and definitions |
| ISO 3842-2006 | 道路车辆.(半挂牵引车)牵引座.互换性 | Road vehicles - Fifth wheels - Interchangeability |
| ISO 3853-1994 | 道路车辆 牵引或轻型挂车的牵引车连接装置 机械强度试验 | Road vehicles - Towing vehicle coupling device to tow caravans or light trailers - Mechanical strength test |
| ISO 3871-2000 | 道路车辆 石油基或非石油基制动液容器的标记 | Road vehicles - Labelling of containers for petroleum or non-petroleum base brake fluid |
| ISO 3874 AMD 3-2005 | 系列1集装箱.装卸与加固.修改件3:双垛轨道车操作 | Series 1 freight containers - Handling and securing; Amendment 3: Double stack rail car operations |
| ISO 3888-1-1999 | 乘用车 急剧改变车道的操纵用试验车道 第1部分:两车道变换 | Passenger cars - Test track for a severe lane-change manoeuvre - Part 1: Double-lane change |
| ISO 3888-2-2002 | 乘用车.车道急剧改变操纵用试验车道.第2部分:故障免除 | Passenger cars - Test track for a severe lane-change manoeuvre - Part 2: Obstacle avoidance |
| ISO 3894-2005 | 道路车辆.商用车辆的车轮/轮辋.试验方法 | Road vehicles - Wheels/rims for commercial vehicles - Test methods |
| ISO 3895-1986 | 道路车辆 屏蔽和防水火花塞及其连接 2型 | Road vehicles; Screened and waterproof spark-plug and its connection; Type 2 |
| ISO 3896-1986 | 道路车辆 屏蔽和防水火花塞及其连接 3型 | Road vehicles; Screened and waterproof spark-plug and its connection; Type 3 |
| ISO 3911-2004 | 充气轮胎用车轮和轮辋.词汇、标识和标记 | Wheels and rims for pneumatic tyres - Vocabulary, designation and marking |
| ISO 3917-1999 | 道路车辆 安全玻璃材料 耐辐射、耐高温、耐湿度、耐燃烧和耐模拟气候的试验方法 | Road vehicles - Safety glazing materials - Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering |
| ISO 3929-2003 | 道路车辆.在检验或维修过程中废气排放量的测量方法 | Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance |
| ISO 3930 AMD 1-2004 | 机动车排气的测量仪器.修改件1 | Instruments for measuring vehicle exhaust emissions; Amendment 1 |
| ISO 3930-2000 | 测量车辆废气排放的仪器 | Instruments for measuring vehicle exhaust emissions |
| ISO 3958-1996 | 乘用车 驾驶员手控活动范围 | Passenger cars - Driver hand-control reach |
| ISO 3984-2004 | 道路车辆.后部移动障碍壁冲击试验过程 | Road vehicles - Rear moving barrier impact test procedure |
| ISO 3996-1995 | 道路车辆 使用非石油基制动液的液压制动系统软管组件 | Road vehicles - Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid |
| ISO 4000-1-2007 | 乘用车轮胎和轮辋.第1部分:轮胎(米制系列) | Passenger car tyres and rims - Part 1: Tyres (metric series) |
| ISO 4000-2-2007 | 乘用车轮胎和轮辋.第2部分:轮辋 | Passenger car tyres and rims - Part 2: Rims |
| ISO 4008-1-1980 | 道路车辆 喷油泵试验 第1部分:动态条件 | Road vehicles; Fuel injection pump testing; Part 1 : Dynamic conditions |
| ISO 4008-2-1983 | 道路车辆 喷油泵试验 第2部分:静态条件 | Road vehicles; Fuel injection pump testing; Part 2 : Static conditions |
| ISO 4008-3 AMD 1-2002 | 道路车辆.喷油泵试验.第3部分:应用和试验程序.修改1 | Road vehicles - Fuel injection pump testing - Part 3: Application and test procedures; Amendment 1 |
| ISO 4008-3-1987 | 道路车辆 喷油泵试验 第3部分:应用和试验程序 | Road vehicles; Fuel injection pump testing; Part 3 : Application and test procedures |
| ISO 4009-2000 | 商业车辆 牵引车和挂车之间电气和气动连接的配置 | Commercial vehicles - Location of electrical and pneumatic connections between towing vehicles and trailers |
| ISO 4020-2001 | 道路车辆 柴油机过滤器 试验方法 | Road vehicles - Fuel filters for diesel engines - Test methods |
| ISO 4024-1992 | 道路车辆.点火线圈.低压电缆连接 | Road vehicles; ignition coils; low-tension cable connections |
| ISO 4030-1983 | 道路车辆 车辆识别代码(VIN) 位置和固定 | Road vehicles; Vehicle identification number (VIN); Location and attachment |
| ISO 4038-1996 | 道路车辆 液压制动系统 单喇叭口管、螺孔和阳螺纹接头和软管管端接头 | Road vehicles - Hydraulic braking systems - Simple flare pipes, tapped holes, male fittings and hose end fittings |
| ISO 4039-1-1998 | 道路车辆 气压制动系统 第1部分:有平面密封面的管、阳螺纹管接头和螺纹孔 | Road vehicles - Pneumatic braking systems - Part 1: Pipes, male fittings and tapped holes with facial sealing surface |
| ISO 4039-2-1998 | 道路车辆 气压制动系统 第2部分:有锥形密封面的管、阳螺纹管接头和螺纹孔 | Road vehicles - Pneumatic braking systems - Part 2: Pipes, male fittings and tapped holes with conical sealing surface |
| ISO 4040-2001 | 道路车辆 机动车辆中的手操纵件、指示器和信号装置的位置 | Road vehicles - Location of hand controls, indicators and tell-tales in motor vehicles |
| ISO 4082-1981 | 道路车辆 机动车 闪光装置 | Road vehicles; Motor vehicles; Flasher units |
| ISO 4086-2001 | 道路车辆 半挂车牵引座的90号连接销 互换性 | Road vehicles - 90 semi-trailer fifth wheel kingpin - Interchangeability |
| ISO 4091-2003 | 道路车辆.牵引车和挂车之间电气连接用连接器.定义、试验和要求 | Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Definitions, tests and requirements |
| ISO 4100-1980 | 道路车辆 世界零部件制造厂商识别代码(WPMI) | Road vehicles; World parts manufacturer identifier (WPMI) code |
| ISO 4106-2004 | 摩托车.发动机试验规程.净功率 | Motorcycles - Engine test code - Net power |
| ISO 4107-1998 | 商用车辆 轮毂安装尺寸 | Commercial vehicles - Wheel hub attachment dimensions |
| ISO 4113-1988 | 道路车辆 柴油机喷油泵的校泵油 | Road vehicles; calibration fluid for diesel injection equipment |
| ISO 4129-1990 | 机动脚踏两用车 操纵件、指示器和信号装置的符号 | Mopeds; symbols for controls, indicators and tell-tales |
| ISO 4130-1978 | 道路车辆 三维基准系统和基准符号 定义 | Road vehicles; Three-dimensional reference system and fiducial marks; Definitions |
| ISO 4131-1979 | 道路车辆 乘用车的尺寸代码 | Road vehicles; Dimensional codes for passenger cars |
| ISO 4138-2004 | 乘用车.稳态环行驾驶.开环试验程序 | Passenger cars - Steady-state circular driving behaviour - Open-loop test methods |
| ISO 4141-1-2005 | 道路车辆.多芯连接电缆.第1部分:基本性能铠装电缆的试验方法和要求 | Road vehicles - Multi-core connecting cables - Part 1: Test methods and requirements for basic performance sheathed cables |
| ISO 4141-2-2006 | 道路车辆.多芯连接电缆.第2部分:高性能铠装电缆的试验方法和要求 | Road vehicles - Multi-core connecting cables - Part 2: Test methods and requirements for high performance sheathed cables |
| ISO 4141-3-2006 | 道路车辆.多芯连接电缆.第3部分:非屏蔽铠装低压电缆的结构、尺寸和标记 | Road vehicles - Multi-core connecting cables - Part 3: Construction, dimensions and marking of unscreened sheathed low-voltage cables |
| ISO 4141-4-2001 | 道路车辆 多芯连接电缆 第4部分：铰链试验方法和对装芯电缆组件的要求 | Road vehicles - Multi-core connecting cables - Part 4: Articulation test methods and requirements for coiled cable assemblies |
| ISO 4148-2004 | 道路车辆.专用警示信号灯.尺寸 | Road vehicles - Special warning lamps - Dimensions |
| ISO 4151-1987 | 道路车辆 轻便摩托车 操纵件的型式、定位和功能 | Road vehicles; Mopeds; Type, location and functions of controls |
| ISO 4164-1978 | 道路车辆 轻便摩托车 发动机试验规程 净功率 | Road vehicles; Mopeds; Engine test code; Net power |
| ISO 4165-2001 | 道路车辆 电气连接 双极接线盒 | Road vehicles - Electrical connections - Double-pole connection |
| ISO 4182-1999 | 汽车 变暗光束前照灯角度随载荷变化的测量 | Motor vehicles - Measurement of variations in dipped-beam headlamp angle as a function of load |
| ISO 4209-1-2001 | 货车和公共汽车轮胎和轮辋(米制系列) 第1部分:轮胎 | Truck and bus tyres and rims (metric series) - Part 1: Tyres |
| ISO 4209-2-2001 | 货车和公共汽车轮胎和轮辋(米制系列) 第2部分:轮辋 | Truck and bus tyres and rims (metric series) - Part 2: Rims |
| ISO 4210-1996 | 自行车 自行车的安全要求 | Cycles - Safety requirements for bicycles |
| ISO 4249-1-1985 | 摩托车轮胎和轮辋(代号规格系列) 第1部分:轮胎 | Motorcycle tyres and rims (Code designated series); Part 1 : Tyres |
| ISO 4249-2-1990 | 摩托车轮胎和轮辋(代号规格系列) 第2部分:轮胎额定载荷值 | Motorcycle tyres and rims (code-designated series); part 2: tyre load ratings |
| ISO 4249-3-2004 | 摩托车轮胎和轮辋(代号规格系列).第3部分:轮辋 | Motorcycle tyres and rims (code-designated series) - Part 3: Rims |
| ISO 4513-2003 | 道路车辆.能见度.驾驶员眼睛位置的眼睛活动范围的确定方法 | Road vehicles - Visibility - Method for establishment of eyellipses for driver's eye location |
| ISO 4925-2005 | 道路车辆.液压系统用非石油基制动液的规范 | Road vehicles - Specification of non-petroleum-base brake fluids for hydraulic systems |
| ISO 4926-2006 | 道路车辆.液压制动系统.非石油基基准液 | Road vehicles - Hydraulic braking systems - Non-petroleum-base reference fluids |
| ISO 4927-2005 | 道路车辆.使用非石油基液压制动液的鼓式液压制动轮缸的弹性保护罩(最高工作温度120℃) | Road vehicles - Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 °C max.) |
| ISO 4928-2006 | 道路车辆.使用非石油基液压制动液的液压制动系统液压缸的弹性皮碗和密封圈(最高工作温度120℃) | Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 °C max.) |
| ISO 4929-1978 | 道路车辆 使用非石油基液压制动液的液压制动主液压缸储油器的膜片密封垫 | Road vehicles; Diaphragm gaskets for hydraulic brake master cylinder reservoirs using a non-petroleum base hydraulic brake fluid |
| ISO 4930-2006 | 道路车辆.使用非石油基液压制动液的液压制动盘式液压缸的弹性密封垫(最高工作温度150℃) | Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150° C max.) |
| ISO 504-1975 | 硬质合金车刀 名称和标志 | Turning tools with carbide tips; Designation and marking |
| ISO 5053-1987 | 机动工业车辆 术语 两种语言版 | Powered industrial trucks; Terminology Bilingual edition |
| ISO 5057-1993 | 工业车辆 叉车货叉在使用中的检查和修复 | Industrial trucks; inspection and repair of fork arms in service on fork-lift trucks |
| ISO 509-1996 | 托盘搬运车 基本尺寸 | Pallet trucks - Principal dimensions |
| ISO 5128-1980 | 声学 汽车内的噪声的测量 | Acoustics; Measurement of noise inside motor vehicles |
| ISO 5130-2007 | 声学.平稳道路车辆发射声压级的测量 | Acoustics - Measurements of sound pressure level emitted by stationary road vehicles |
| ISO 514-1975 | 硬质合金车刀 内圆车刀 | Turning tools with carbide tips; Internal tools |
| ISO 5287-2003 | 皮带传动.汽车工业用窄V带.疲劳试验 | Belt drives - Narrow V-belts drives for the automotive industry - Fatigue test |
| ISO 5422-1982 | 道路车辆 拖绳、拖缆或拖棒的固定 | Road vehicles; Anchorages for towing ropes, cables or bars |
| ISO 5608-1995 | 可转位刀片的车削和仿形切削刀夹和刀夹头 名称 | Turning and copying tool holders and cartridges for indexable inserts - Designation |
| ISO 5610 DAM 1-1991 | 可转位的刀片的车刀和仿形刀杆.尺寸.第1次修改:带菱V型转位刀片的H、J和V型刀片座 | Single-point tool holders for turning and copying, for indexable inserts; dimensions; amendment 1: tool holders style H, J and V, with rhombic V-shape indexable inserts |
| ISO 5610-1998 | 带可转位刀片的车削和仿形切削用单刃刀夹 尺寸 | Single-point tool holders for turning and copying, for indexable inserts - Dimensions |
| ISO 5669-1982 | 农业挂车和挂车设备 制动液压缸 规范 | Agricultural trailers and trailed equipment; Braking cylinders; Specifications |
| ISO 5670-1984 | 农业挂车 单向作用的伸缩倾翻式液压缸 25 MPa(250巴)系列 1、2和3型 互换性尺寸 | Agricultural trailers; Single-acting telescopic tipping cylinders; 25 MPa (250 bar) series; Types 1, 2 and 3; Interchangeability dimensions |
| ISO 5692-1-2004 | 农用车辆.拖挂车辆的机械连接装置.第1部分:挂接环的尺寸 | Agricultural vehicles - Mechanical connections on towed vehicles - Part 1: Dimensions for hitch rings |
| ISO 5692-2 Technical Corrigendum 1-2004 | 农用车辆.拖挂车辆的机械连接装置.第2部分:带座孔的连接环40.技术勘误1 | Agricultural vehicles - Mechanical connections on towed vehicles - Part 2: Coupling ring 40 with socket; Technical Corrigendum 1 |
| ISO 5692-2-2002 | 农用车辆.拖挂车辆的机械连接装置.第2部分: 带40座孔的连接环 | Agricultural vehicles - Mechanical connections of towed vehicles - Part 2: Coupling ring 40 with socket |
| ISO 5696-1984 | 牵引式农业车辆 制动器和制动装置 实验室试验方法 | Trailed agricultural vehicles; Brakes and braking devices; Laboratory test method |
| ISO 5697-1982 | 农林车辆 制动性能的测定 | Agricultural and forestry vehicles; Determination of braking performance |
| ISO 5740-1982 | 道路车辆 后视镜 测定反射率的试验方法 | Road vehicles; Rear view mirrors; Test method for determining reflectance |
| ISO 5751-1 Technical Corrigendum 1-2006 | 摩托车轮胎和轮辋(米制系列).第1部分:设计指南.技术勘误1 | Motorcycle tyres and rims (metric series) - Part 1: Design guides; Technical Corrigendum 1 |
| ISO 5751-1-2004 | 摩托车轮胎和轮辋(米制系列).第1部分:设计指南 | Motorcycle tyres and rims (metric series) - Part 1: Design guides |
| ISO 5751-2-2004 | 摩托车轮胎和轮辋(米制系列).第2部分:轮胎尺寸和载荷能力 | Motorcycle tyres and rims (metric series) - Part 2: Tyre dimensions and load-carrying capacities |
| ISO 5751-3-2004 | 摩托车轮胎和轮辋(米制系列).第3部分:配套轮辋轮廓范围 | Motorcycle tyres and rims (metric series) - Part 3: Range of approved rim contours |
| ISO 5766-1990 | 托盘堆码车和高起升平台车 稳定性试验 | Pallet stackers and high-lift platform trucks; stability tests |
| ISO 5767 AMD 1-1999 | 工业车辆在门架前倾条件下堆垛作业 附加稳定性试验 修改1 | Industrial trucks operating in special condition of stacking with mast tilted forward - Additional stability test; Amendment 1 |
| ISO 5767-1992 | 工业车辆在门架前倾条件下堆垛作业 附加稳定性试验 | Industrial trucks operating in special condition of stacking with mast tilted forward; additional stability test |
| ISO 5775-1-1997 | 自行车轮胎和轮辋 第1部分:轮胎名称和尺寸 | Bicycle tyres and rims - Part 1: Tyre designations and dimensions |
| ISO 5775-2 AMD 1-2001 | 自行车轮胎和轮辋 第2部分:轮辋 修改1 | Bicycle tyres and rims - Part 2: Rims; Amendment 1 |
| ISO 5775-2-1996 | 自行车轮胎和轮辋 第2部分:轮辋 | Bicycle tyres and rims - Part 2: Rims |
| ISO 5897-1998 | 乘用车 后车窗除雾系统 试验方法 | Passenger cars - Rear-window demisting system - Test method |
| ISO 5898-1997 | 乘用车 后车窗除霜系统 试验方法 | Passenger cars - Rear-window defrosting system - Test method |
| ISO 5948-1994 | 铁路车辆材料 超声波验收检验 | Railway rolling stock material - Ultrasonic acceptance testing |
| ISO 6054-1-1994 | 摩托车轮胎和轮辋(代号规格系列) 4-12直径代号 第1部分:轮胎 | Motorcycle tyres and rims (Code-designated series) - Diameter codes 4 to 12 - Part 1: Tyres |
| ISO 6054-2-1990 | 摩托车轮胎和轮辋(代号规格系列) 4～12直径代号 第2部分:轮辋 | Motorcycle tyres and rims (code-designated series); diameter codes 4 to 12; part 2: rims |
| ISO 6055-2004 | 工业用货车.护顶架.规范和检验 | Industrial trucks - Overhead guards - Specification and testing |
| ISO 611-2003 | 道路车辆.机动车及其挂车的制动.词汇 | Road vehicles - Braking of automative vehicles and their trailers - Vocabulary |
| ISO 6115-1988 | 造船 拖网绞车 | Shipbuilding; trawl winches |
| ISO 6117-2005 | 道路车辆.使用非石油基液压制动液的鼓式液压制动轮缸的弹性保护罩(最高工作温度100℃) | Road vehicles - Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 °C max.) |
| ISO 6118-2006 | 道路车辆.使用非石油基制动液的液压制动促动缸的弹性皮碗和密封圈(最高工作温度70℃) | Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70 °C max.) |
| ISO 6119-2006 | 道路车辆.使用非石油基液压制动液的液压盘式制动液压缸的弹性密封垫(最高工作温度120℃) | Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 °C max.) |
| ISO 612-1978 | 道路车辆 机动车和挂车的尺寸 术语和定义 | Road vehicles; Dimensions of motor vehicles and towed vehicles; Terms and definitions |
| ISO 6120-1995 | 道路车辆.使用石油基液压液的液压制动系统制动软管总成 | Road vehicles - Brake hose assemblies for hydraulic braking systems used with petroleum-base brake fluid |
| ISO 6155-1998 | 机床 卧式转塔车床和单轴自动车床检验条件 精度检验 | Machine tools - Test conditions for horizontal spindle turret and single spindle automatic lathes - Testing of the accuracy |
| ISO 6182-10-2006 | 消防.自动喷水灭火系统.第10部分:家用洒水车的要求和试验方法 | Fire protection - Automatic sprinkler systems - Part 10: Requirements and test methods for domestic sprinklers |
| ISO 6219-1983 | 造船 内河船舶 起锚机和起锚绞车 | Shipbuilding; Inland vessels; Windlasses and anchor capstans |
| ISO 6255-1997 | 乘用车 乘用车后窗洗涤和刮刷系统 试验方法 | Passenger cars - Rear-window washing and wiping systems - Test methods |
| ISO 6292-1996 | 机动工业车辆和牵引车 制动器性能和零件强度 | Powered industrial trucks and tractors - Brake performance and component strength |
| ISO 6310-2001 | 道路车辆 制动衬片 压缩应力试验方法 | Road vehicles - Brake linings - Compressive strain test method |
| ISO 6311-1980 | 道路车辆 制动衬片 衬片材料的内剪切强度 试验程序 | Road vehicles; Brake linings; Internal shear strength of lining material; Test procedure |
| ISO 6312-2001 | 道路车辆 制动衬片 盘式制动块和鼓式制动蹄组件的剪切试验程序 | Road vehicles - Brake linings - Shear test procedure for disc brake pad and drum brake shoe assemblies |
| ISO 6313-1980 | 道路车辆 制动衬片 盘式制动块尺寸和形状的热效应 试验程序 | Road vehicles; Brake linings; Effects of heat on dimensions and form of disc brake pads; Test procedure |
| ISO 6314-1980 | 道路车辆 制动衬片 耐水、耐盐溶液、耐油和耐制动液的性能 试验程序 | Road vehicles; Brake linings; Resistance to water, saline solution, oil and brake fluid; Test procedure |
| ISO 6315-1980 | 道路车辆 制动衬片 腐蚀引起的衬片铁质结合面的粘结 试验程序 | Road vehicles; Brake linings; Seizure to ferrous mating surface due to corrosion; Test procedure |
| ISO 6452-2007 | 橡胶或塑料涂层织物.汽车内装饰材料雾气凝结特征的测定 | Rubber- or plastics-coated fabrics - Determination of fogging characteristics of trim materials in the interior of automobiles |
| ISO 6460-1-2007 | 摩托车.废气排放和燃料消耗测量方法.第1部分:一般试验要求 | Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 1: General test requirements |
| ISO 6460-2-2007 | 摩托车.废气排放和燃料消耗测量方法.第2部分:试验循环和特殊试验条件 | Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions |
| ISO 6460-3-2007 | 摩托车.废气排放和燃料消耗测量方法.第3部分:恒速下的燃料消耗测量 | Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 3: Fuel consumption measurement at a constant speed |
| ISO 6469-1-2001 | 道路电气车辆 安全规范 第1部分：车载电能储存 | Electric road vehicles - Safety specifications - Part 1: On-board electrical energy storage |
| ISO 6469-2-2001 | 道路电气车辆 安全规范 第2部分：功能安全方法和失效防护 | Electric road vehicles - Safety specifications - Part 2: Functional safety means and protection against failures |
| ISO 6469-3 Technical Corrigendum 1-2003 | 电动道路车辆.安全性规范.第3部分:人员的电危险防护.技术勘误1 | Electric road vehicles - Safety specifications - Part 3: Protection of persons against electric hazards; Technical Corrigendum 1 |
| ISO 6469-3-2001 | 道路电气车辆 安全规范 第3部分：使人免受电气伤害的保护 | Electric road vehicles - Safety specifications - Part 3: Protection of persons against electric hazards |
| ISO 6483 Technical Corrigendum 1-1994 | 土方机械.自卸车车厢.容量标定.技术勘误1 | Earth-moving machinery - Dumper bodies - Volumetric rating; Technical Corrigendum 1 |
| ISO 6483-1980 | 土方机械 自卸车车厢 容量标定 | Earth-moving machinery; Dumper bodies; Volumetric rating |
| ISO 6487-2002 | 道路车辆.冲击试验测量技术.仪器设备 | Road vehicles - Measurement techniques in impact tests - Instrumentation |
| ISO 6489-1-2001 | 农业车辆 被牵引和牵引车之间的机械连接装置 第1部分:挂勾尺寸 | Agricultural vehicles - Mechanical connections between towed and towing vehicles - Part 1: Dimensions of hitch-hooks |
| ISO 6489-2-2002 | 农用车辆.机械连接装置间拖绳和牵引车辆.第2部分:40 U型钩规范 | Agricultural vehicles - Mechanical connections between towed and towing vehicles - Part 2: Specifications for clevis coupling 40 |
| ISO 6489-3-2004 | 农业车辆.被牵引和牵引车之间的机械连接装置.第3部分:拖拉机牵引杆 | Agricultural vehicles - Mechanical connections between towed and towing vehicles - Part 3: Tractor drawbar |
| ISO 6489-4-2004 | 农用车辆.被牵引和牵引车间的机械连接装置.第4部分:楔式耦合装置的尺寸 | Agricultural vehicles - Mechanical connections between towed and towing vehicles - Part 4: Dimensions of piton-type coupling |
| ISO 65-1981 | 按照ISO 7/1 车螺纹的碳素钢管 | Carbon steel tubes suitable for screwing in accordance with ISO 7/1 |
| ISO 6518-1-2002 | 道路车辆.点火系统.第1部分:词汇 | Road vehicles - Ignition systems - Part 1: Vocabulary |
| ISO 6518-2 Technical Corrigendum 1-1997 | 道路车辆 点火系统 第2部分:电气性能和功能试验方法 技术勘误1 | Road vehicles - Ignition systems - Part 2: Electrical performance and function test methods; Technical Corrigendum 1 |
| ISO 6518-2-1995 | 道路车辆 点火系统 第2部分:电气性能和功能试验方法 | Road vehicles - Ignition systems - Part 2: Electrical performance and function test methods |
| ISO 6546-2006 | 道路车辆.乘车人约束性能评价用事故数据的收集 | Road vehicles - Collection of accident data for evaluation of occupant restraint performance |
| ISO 6549-1999 | 道路车辆 H-和R-点(臀)测定规程 | Road vehicles - Procedure for H- and R-point determination |
| ISO 6550-1-1994 | 道路车辆 带锥座的封闭型电热塞及其气缸盖安装孔尺寸 第1部分:M14×1.25电热塞 | Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - Part 1: M14 × 1,25 glow-plugs |
| ISO 6550-2-1994 | 道路车辆 带锥座的封闭型电热塞及其气缸盖安装孔尺寸 第2部分:M12×1.25电热塞 | Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - Part 2: M12 × 1,25 glow-plugs |
| ISO 6550-3-2002 | 道路车辆.带锥形座的罩型热线点火塞及其汽缸盖.第3部分:M10热线点火塞 | Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - Part 3: M10 glow-plugs |
| ISO 6550-4-2005 | 道路车辆.带锥座的封闭型电热塞及其汽缸盖.第4部分:M8 x 1电热塞 | Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - Part 4: M8 x 1 glow-plugs |
| ISO 6555-1988 | 造船 顶索定位绞车 | Shipbuilding; topping winches |
| ISO 6597-2005 | 道路车辆.机动车用带有电子控制功能的液压制动系统.试验过程 | Road vehicles - Hydraulic braking systems, including those with electronic control functions, for motor vehicles - Test procedures |
| ISO 6661-1983 | 新鲜水果和蔬菜 陆路运输车辆上平行六面体包装件的排列 | Fresh fruits and vegetables; Arrangement of parallelepipedic packages in land transport vehicles |
| ISO 6692-1981 | 自行车 零部件标记 | Cycles; Marking of cycle components |
| ISO 6695-1991 | 自行车 方榫中轴和曲柄的配合 装配尺寸 | Cycles; pedal axle and crank assembly with square end fitting; assembly dimensions |
| ISO 6696-1989 | 自行车 用于中接头装配的螺纹 | Cycles; screw threads used in bottom bracket assemblies |
| ISO 6697-1994 | 自行车 前、后轴和飞轮 装配尺寸 | Cycles - Hubs and freewheels - Assembly dimensions |
| ISO 6698-1989 | 自行车 飞轮与自行车后轴身的装配螺纹 | Cycles; screw threads used to assemble freewheels on bicycle hubs |
| ISO 6699-1990 | 自行车 把横管和把立管接头 装配尺寸 | Cycles; stem and handlebar bend; assembly dimensions |
| ISO 6701-1991 | 自行车 辐条条母的外形尺寸 | Cycles; external dimensions of spoke nipples |
| ISO 6722-2006 | 道路车辆.60V和600V单芯电缆.尺寸、试验方法和要求 | Road vehicles - 60 V and 600 V single-core cables - Dimensions, test methods and requirements |
| ISO 6725-1981 | 道路车辆 两轮轻便摩托车和摩托车的尺寸 术语和定义 | Road vehicles; Dimensions of two-wheeled mopeds and motorcycles; Terms and definitions |
| ISO 6726-1988 | 两轮轻便摩托车和摩托车 质量 词汇 两种语言版 | Mopeds and motorcycles with two wheels; masses; vocabulary |
| ISO 6727-1981 | 道路车辆 摩托车 操纵件、指示器和信号装置的符号 | Road vehicles; Motorcycles; Symbols for controls, indicators and telltales |
| ISO 6742-1-1987 | 自行车 照明和反射装置 光学和物理要求 第1部分:照明设备 | Cycles; Lighting and retro-reflective devices; Photometric and physical requirements; Part 1 : lighting equipment |
| ISO 6742-2-1985 | 自行车 照明和反射装置 光学和物理要求 第2部分:反射装置 | Cycles; Lighting and retro-reflective devices; Photometric and physical requirements; Part 2 : Retro-reflective devices |
| ISO 6786-1980 | 道路车辆 气压制动系统 各分总成连接的识别 | Road vehicles; Air braking systems; Identification of connections on units |
| ISO 6797-1982 | 道路车辆 机动车 对闪光器的生产一致性的要求 | Road vehicles; Motor vehicles; Production conformity requirements for flasher units |
| ISO 6813-1998 | 道路车辆 碰撞分类 术语 两种语言版 | Road vehicles - Collision classification - Terminology |
| ISO 6855-1983 | 道路车辆 装有控制点火发动机装置的机动自行车排出气体污染物的测量方法 | Road vehicles; Measurement methods for gaseous pollutants emitted by mopeds equipped with a controlled ignition engine |
| ISO 6856-2005 | 道路车辆.非屏蔽高电压点火电缆组件.试验方法和一般要求 | Road vehicles - Unscreened high-voltage ignition cable assemblies - Test methods and general requirements |
| ISO 6933-1986 | 铁路车辆材料 磁粉验收检验 | Railway rolling stock material; magnetic particle acceptance testing |
| ISO 6969-2004 | 道路车辆.音响信号装置.装车后的试验 | Road vehicles - Sound signalling devices - Tests after mounting on vehicle |
| ISO 6970-1994 | 摩托车和轻便摩托车 污染试验 底盘测功机台架 | Motorcycles and mopeds - Pollution tests - Chassis dynamometer bench |
| ISO 7030-1987 | 道路车辆 12、13、14、15、16、17、18和19型螺旋拧入式喷嘴器件 | Road vehicles; Screw-mounted injection nozzle holders, types 12, 13, 14, 15, 16, 17, 18 and 19 |
| ISO 7072-1993 | 农林用拖拉机和机械 车轴销和弹簧销 尺寸和要求 | Tractors and machinery for agriculture and forestry; linch pins and spring pins; dimensions and requirements |
| ISO 7116-1995 | 轻便摩托车 最大速度的测量 | Mopeds - Measurement of maximum speed |
| ISO 7117-1995 | 摩托车 最大速度的测量 | Motorcycles - Measurement of maximum speed |
| ISO 7132-2003 | 土方机械.自动倾卸车.术语和商业规范 | Earth-moving machinery - Dumpers - Terminology and commercial specifications |
| ISO 7141-2005 | 道路车辆.轻合金轮.碰撞试验 | Road vehicles - Light alloy wheels - Impact test |
| ISO 7152 AMD 1-2006 | 野营帐蓬和大蓬车蓬布.术语和等效术语表.修改件1 | Camping tents and caravan awnings - Vocabulary and list of equivalent terms; Amendmen 1 |
| ISO 7152-1997 | 野营帐篷和旅居车天篷 词汇和等效术语表 两种语言版 | Camping tents and caravan awnings - Vocabulary and list of equivalent terms |
| ISO 7176-19-2001 | 轮椅 第19部分：机动车辆用有轮移动设备 | Wheelchairs - Part 19: Wheeled mobility devices for use in motor vehicles |
| ISO 7176-21-2003 | 轮椅.第21部分:电动轮椅和小型电动摩托车的电磁兼容性要求和试验方法 | Wheelchairs - Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and motorized scooters |
| ISO 7176-4-1997 | 轮椅 第4部分:确定电动轮椅和小型摩托车理论行驶距离范围的能量消耗 | Wheelchairs - Part 4: Energy consumption of electric wheelchairs and scooters for determination of theoretical distance range |
| ISO 7227 AMD 1-2004 | 道路车辆.照明和光信号装置.词汇.修改件1 | Road vehicles - Lighting and light signalling devices - Vocabulary; Amendment 1 |
| ISO 7227-1987 | 道路车辆 照明和光信号装置 词汇 三种语言版 | Road vehicles; Lighting and light signalling devices; Vocabulary Trilingual edition |
| ISO 7237 AMD 1-2001 | 旅居车 质量和尺寸 词汇 两种语言版 修改1 | Caravans - Masses and dimensions - Vocabulary; Amendment 1 |
| ISO 7237-1993 | 旅居车 质量和尺寸 词汇 两种语言版 | Caravans; masses and dimensions; vocabulary |
| ISO 7284-1993 | 电阻焊设备 汽车工业用多点点焊的两个单独副线圈的变压器的特殊技术条件 | Resistance welding equipment; particular specifications applicable to transformers with two separate secondary windings for multi-spot welding, as used in the automobile industry |
| ISO 7308-1987 | 道路车辆 储能液压制动用的石油基制动液 | Road vehicles; Petroleum-based brake-fluid for stored-energy hydraulic brakes |
| ISO 7309-1985 | 道路车辆 液压制动系统 ISO标准石油基液 | Road vehicles; Hydraulic braking systems; ISO reference petroleum base fluid |
| ISO 7364-1983 | 造船及海上结构物 甲板机械 舷梯绞车 | Shipbuilding and marine structures - Deck machinery - Accommodation ladder winches |
| ISO 7365-1983 | 造船及海上结构物 甲板机械 深海用拖缆绞车 | Shipbuilding and marine structures; Deck machinery; Towing winches for deep sea use |
| ISO 7375-1-1986 | 道路车辆 牵引车和挂车之间气压制动连接用蛇形管组件 第1部分:尺寸 | Road vehicles; Coiled pipe assemblies for pneumatic braking connection between motor vehicles and towed vehicles; Part 1 : Dimensions |
| ISO 7375-2-1998 | 道路车辆 牵引车和挂车之间气压制动连接用蛇形管组件 第2部分:性能要求 | Road vehicles - Coiled tube assemblies for air brake connection between towing and towed vehicles - Part 2: Performance requirements |
| ISO 7397-1-1993 | 乘用车 驾驶员直接视野的验证 第1部分:车辆静态测量定位 | Passenger cars; verification of driver's direct field of view; part 1: vehicle positioning for static measurement |
| ISO 7397-2-1993 | 乘用车 驾驶员直接视野的验证 第2部分:试验方法 | Passenger cars; verification of driver's direct field of view; part 2: test method |
| ISO 7398-1990 | 摩托车 直流闪光器 | Motorcycles; direct current flasher units |
| ISO 7399-1990 | 摩托车 交流闪光器 | Motorcycles; alternating current flasher units |
| ISO 7400-1990 | 轻便摩托车 交流闪光器 | Mopeds; alternating current flasher units |
| ISO 7401-2003 | 道路车辆.横向瞬态响应的试验方法.开路试验方法 | Road vehicles - Lateral transient response tests methods - Open-loop test methods |
| ISO 7440-1-1991 | 道路车辆 喷油泵试验台 第1部分:标准喷油器总成 | Road vehicles; fuel injection equipment testing; part 1: calibration nozzle and holder assemblies |
| ISO 7440-2-1991 | 道路车辆 喷油泵试验台 第2部分:孔板流量测量 | Road vehicles; fuel injection equipment testing; part 2 orifice plate flow-measurement |
| ISO 7575-1993 | 商用道路车辆 平面连接的车轮固定螺母 | Commercial road vehicles; flat attachment wheel fixing nuts |
| ISO 7576-1990 | 道路车辆 压燃式发动机的两级燃油滤清器 装配和连接尺寸 | Road vehicles; two-stage fuel filters for compression-ignition engines; mounting and connecting dimensions |
| ISO 7578-2001 | 道路车辆 封闭型电热塞 一般要求和试验方法 | Road vehicles - Sheath-type glow-plugs - General requirements and test methods |
| ISO 7588-1-1998 | 道路车辆 电气/电子开关设备 第1部分:继电器和闪光器 | Road vehicles - Electrical/electronic switching devices - Part 1: Relays and flashers |
| ISO 7588-2-1998 | 道路车辆 电气/电子开关设备 第2部分:电子装置 | Road vehicles - Electrical/electronic switching devices - Part 2: Electronic devices |
| ISO 7588-3-1998 | 道路车辆 电气/电子开关设备 第3部分:微继电器 | Road vehicles - Electrical/electronic switching devices - Part 3: Microrelays |
| ISO 7591-1982 | 道路车辆 机动车和挂车的反光注册牌照 规范 | Road vehicles; Retro-reflective registration plates for motor vehicles and trailers; Specification |
| ISO 7598-1988 | 适于按照ISO 7/1车螺纹用不锈钢管 | Stainless steel tubes suitable for screwing in accordance with ISO 7-1 |
| ISO 7628-1-1998 | 道路车辆 气压制动系统用热塑管材 第1部分:尺寸和标记 | Road vehicles - Thermoplastics tubing for air braking systems - Part 1: Dimensions and marking |
| ISO 7628-2 Technical Corrigendum 1-1999 | 道路车辆 气压制动系统用热塑管材 第2部分:车辆上的安装和试验方法 技术勘误1 | Road vehicles - Thermoplastics tubing for air braking systems - Part 2: Mounting on vehicle and test methods; Technical Corrigendum 1 |
| ISO 7628-2-1998 | 道路车辆 气压制动系统用热塑管材 第2部分:车辆上的安装和试验方法 | Road vehicles - Thermoplastics tubing for air braking systems - Part 2: Mounting on vehicle and test methods |
| ISO 7629-1987 | 道路车辆 制动衬片 盘式制动块 试验后表面和材料伤残的评定 | Road vehicles; Brake linings; Disc brake pads; Evaluation of surface and material flaws after testing |
| ISO 7630-1985 | 道路车辆 使用石油基液压制动液的鼓式制动轮缸的弹性O形密封圈(最高工作温度120℃) | Road vehicles; Elastomeric O-rings for hydraulic drum brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.) |
| ISO 7631-1985 | 道路车辆 使用石油基液压制动液的液压制动系统液压缸的弹性皮碗和密封垫圈(最高工作温度120℃) | Road vehicles; Elastomeric cups and seals for cylinders for hydraulic braking systems using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.) |
| ISO 7632-1985 | 道路车辆 使用石油基液压制动液的液压盘式制动液压缸的弹性密封垫圈(最高工作温度120℃) | Road vehicles; Elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.) |
| ISO 7633-1985 | 道路车辆 使用石油基液压制动液的鼓式液压制动轮缸的弹性保护罩(最高工作温度120℃) | Road vehicles; Elastomeric boots for drum type hydraulic brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.) |
| ISO 7634-2007 | 道路车辆.包括具有电子制动控制功能的受牵引车辆用压缩空气制动系统 | Road vehicles - Compressed air braking systems for towed vehicles including those with electronic braking control functions - Test procedures |
| ISO 7635-2006 | 道路车辆.包括有电子控制功能的机动车辆在内的机动车辆用气压或气动/液压制动系统.试验规程 | Road vehicles - Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions - Test procedures |
| ISO 7637-1-2002 | 道路车辆.由传导和耦合引起的电干扰.第1部分:定义和总则 | Road vehicles - Electrical disturbances from conduction and coupling - Part 1: Definitions and general considerations |
| ISO 7637-2-2004 | 道路车辆.传导和耦合引起的电干扰.第2部分:仅沿电源线瞬间电导 | Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only |
| ISO 7637-3-2007 | 道路车辆.传导和耦合引起的电干扰.第3部分:通过电容耦合和电感耦合经由非电源线线路的瞬间电传输 | Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines |
| ISO 7638-1-2003 | 道路车辆.牵引车和挂车的电气连接用连接器.第1部分:具有24V标称电源电压的车辆的制动系统和行驶系用连接器 | Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Part 1: Connectors for braking systems and running gear of vehicles with 24 V nominal supply voltage |
| ISO 7638-2-2003 | 道路车辆.牵引车和挂车的电气连接用连接器.第2部分:具有12V标称电源电压的车辆的制动系统和行驶系用连接器 | Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Part 2: Connectors for braking systems and running gear of vehicles with 12 V nominal supply voltage |
| ISO 7639-1985 | 道路车辆 诊断系统 图形符号 两种语言版 | Road vehicles; Diagnostic systems; Graphical symbols Bilingual edition |
| ISO 7641-1-1983 | 道路车辆 旅居车和轻型挂车 牵引杆的机械强度计算 第1部分:钢牵引杆 | Road vehicles; Caravans and light trailers; Calculation of the mechanical strength of the drawbar; Part 1 : Steel drawbars |
| ISO 7642-1991 | 旅居挂车和轻型挂车 带有防撞击主车的制动器的01类和02类挂车 制动器惯性台架试验方法 | Caravans and lights trailers; trailers of categories O<(Index)1> and O<(Index)2> with overrun brakes; inertia bench test methods for brakes |
| ISO 7643-1991 | 旅居挂车和轻型挂车 带有防撞击主车的制动器的O1类和O2类挂车 制动控制器的线性台架试验法 | Caravans and light trailers; trailers of categories O<(Index)1> and O<(Index)2> with overrun brakes; linear bench test methods for brake controls |
| ISO 7646-1986 | 商用车辆和公共汽车 齿轮箱法兰 A型 | Commercial vehicles and buses; Gearbox flanges; Type A |
| ISO 7647-1986 | 商用车辆和公共汽车 齿轮箱法兰 S型 | Commercial vehicles and buses; Gearbox flanges; Type S |
| ISO 7650 AMD 1-2001 | 商用车辆和公共汽车 1、2、3和4型起动电机的装配尺寸 修改1 | Commercial vehicles and buses - Mounting dimensions for starter motors of types 1, 2, 3 and 4; Amendment 1 |
| ISO 7650-1987 | 商用车辆和公共汽车 1、2、3和4型起动电机的装配尺寸 | Commercial vehicles and buses; Mounting dimensions for starter motors of types 1, 2, 3 and 4 |
| ISO 7651-1991 | 商用车辆和公共汽车 1、2、3型交流发电机安装尺寸 | Commercial vehicles and buses; mounting dimensions for alternators of types 1, 2 and 3 |
| ISO 7653-1985 | 道路车辆 商用车辆 动力输出装置(PTO)和辅助传动组件之间的联结器 | Road vehicles; Commercial vehicles; Couplings between power take-offs (PTO) and ancillary driven units |
| ISO 7654-1998 | 道路车辆 柴油发动机用旋装式燃油滤清器 装配和连接尺寸 | Road vehicles - Spin-on fuel filters for diesel engines - Mounting and connecting dimensions |
| ISO 7656-1993 | 商用道路车辆 尺寸代码 | Commercial road vehicles; dimensional codes |
| ISO 7707-1986 | 商用道路车辆 后置式动力输出装置(PTO)的连接 | Commercial road vehicles; Connections for rear-mounted power take-offs (PTO) |
| ISO 7716-1985 | 航空货运设备 集装单元装置的运输车辆(UTV) 功能要求 | Air cargo equipment; Unit load devices transport vehicle (UTV); Functional requirements |
| ISO 7717-1985 | 航空器 四轮驱动牵引车 设计考虑的性能要求因素 | Aircraft; Four-wheel-drive tow tractors; Performance requirements factors for design |
| ISO 7718-2003 | 飞机.主舱客舱门.与航空旅客桥或转运车辆连接的接口要求 | Aircraft - Main-deck passenger doors - Interface requirements for connection with passenger-boarding bridge or transfer vehicle |
| ISO 7736-1984 | 道路车辆 前端安装的轿车无线电接收机 包括连接装置的装配空间 | Road vehicles; Car radio for front installation; Installation space including connections |
| ISO 7747-1983 | 道路车辆 全流式润滑油滤清器的滤芯 尺寸 | Road vehicles; Filter elements for full flow oil filters; Dimensions |
| ISO 7750-1-1992 | 商业车辆 空气滤清器滤芯尺寸 第1部分:A型和B型 | Commercial vehicles; dimensions of air filter elements; part 1: types A and B |
| ISO 7750-2-1984 | 道路车辆 商用车辆用空气滤清器滤芯 尺寸 第2部分:C型和D型 | Road vehicles; Air filter elements for commercial vehicles; Dimensions; Part 2 : Types C and D |
| ISO 7803-1987 | 商用道路车辆 转向球接头 | Commercial road vehicles; Steering ball joints |
| ISO 7804-1985 | 商用道路车辆 载货车动力输出装置的侧口 | Commercial road vehicles; Side openings for truck power take-offs |
| ISO 7859-2000 | 轻便摩托车 燃料消耗测量 | Mopeds - Fuel consumption measurements |
| ISO 7862-2004 | 道路车辆.通过模拟正面碰撞评价约束系统的滑车试验过程 | Road vehicles - Sled test procedure for the evaluation of restraint systems by simulation of frontal collisions |
| ISO 7975-2006 | 乘用车.转向时制动.开环试验法 | Passenger cars - Braking in a turn - Open-loop test method |
| ISO 7987-1985 | 木工机械 木工车床 术语和验收条件 | Woodworking machines; Turning lathes; Nomenclature and acceptance conditions |
| ISO 8002-1986 | 机械振动 地面车辆 测量数据的报告方法 | Mechanical vibrations; Land vehicles; Method for reporting measured data |
| ISO 8016-1985 | 农用机械 整体轮毂的车轮 | Machinery for agriculture; Wheels with integral hub |
| ISO 8035-1991 | 超过3.5t的商用车辆和公共汽车 前牵引装置 | Commercial road vehicles and buses over 3,5 t; front towing attachments |
| ISO 8052-1990 | 轻便摩托车 直流闪光器 | Mopeds; direct current flasher units |
| ISO 8066-2-2001 | 汽车空调器用橡胶和塑料软管和软管组件 规范 第2部分：制冷剂134a | Rubber and plastics hoses and hose assemblies for automotive air conditioning - Specification - Part 2: Refrigerant 134a |
| ISO 8090-1990 | 自行车 术语 两种语言版 | Cycles; terminology |
| ISO 8092-1-1996 | 道路车辆 车载电气线束的连接 第1部分:单极联接接头 尺寸和特殊要求 | Road vehicles - Connections for on-board electrical wiring harnesses - Part 1: Tabs for single-pole connections; dimensions and specific requirements |
| ISO 8092-2-2005 | 道路车辆.车载电气线束的联结.第2部分:定义、试验方法和一般性能要求 | Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: Definitions, test methods and general performance requirements |
| ISO 8092-3-1996 | 道路车辆 车载电气线束的连接 第3部分:多极连接接头 尺寸和特殊要求 | Road vehicles - Connections for on-board electrical wiring harnesses - Part 3: Tabs for multi-pole connections; dimensions and specific requirements |
| ISO 8092-4-1997 | 道路车辆 车载电气线束的连接 第4部分:单极和多极连接插头 尺寸和特殊要求 | Road vehicles - Connections for on-board electrical wiring harnesses - Part 4: Pins for single- and multi-pole connections - Dimensions and specific requirements |
| ISO 8093-1985 | 道路车辆 电子系统的故障诊断试验 | Road vehicles; Diagnostic testing of electronic systems |
| ISO 8098-2002 | 儿童自行车安全要求 | Safety requirements for bicycles for young children |
| ISO 8123-1991 | 道路车辆 起动电机径节小齿轮 | Road vehicles; diametral pitch starter motor pinions |
| ISO 8178-11-2006 | 往复式内燃机.废气排放测量.第11部分:瞬态试验条件下非道路车辆发动机排气和颗粒废物排放量现场测量 | Reciprocating internal combustion engines - Exhaust emission measurement - Part 11: Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions |
| ISO 8218-1989 | 道路车辆 前照灯近光光束水平调节装置 | Road vehicles; levelling devices for headlamp dipped beam |
| ISO 8314-1987 | 造船及海上结构物 千斤座和导向滑车座的眼板 | Shipbuilding and marine structures; Trunnion pieces for span bearings and lead block bearings |
| ISO 8349-2002 | 道路车辆. 测量道路表面摩擦力 | Road vehicles - Measurement of road surface friction |
| ISO 8356-1984 | 道路车辆 柴油机 22型螺旋拧入式喷油器 | Road vehicles; Diesel engines; Screw-in injector, type 22 |
| ISO 8379 AMD 1-2001 | 越野叉车 稳定性试验 修改1 | Rough terrain trucks - Stability tests; Amendment 1 |
| ISO 8379-1998 | 越野叉车 稳定性试验 | Rough terrain trucks - Stability tests |
| ISO 8470 DAM 1-1991 | 道路车辆.带平座和16mm六角体的M14×1.25火花塞及其缸头盖.第1次修改 | Road vehicles; M14 1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housing; amendment 1 |
| ISO 8470-2006 | 道路车辆.六角对边16mm的M14×1.25平座火花塞及其气缸盖安装孔 | Road vehicles - M14 x 1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings |
| ISO 8488-1986 | 自行车 自行车前叉上用于装配前叉合件的螺纹 | Cycles; Screw threads used to assemble head fittings on bicycle forks |
| ISO 8518-2001 | 车间空气 铅颗粒及铅化合物的测定 火焰原子吸收光谱法 | Workplace air - Determination of particulate lead and lead compounds - Flame or electrothermal atomic absorption spectrometric method |
| ISO 8562-1990 | 自行车 把芯螺楔的角度 | Cycles; stem wedge angle |
| ISO 8644-2006 | 摩托车.轻质合金钢轮.试验方法 | Motorcycles - Light-alloy wheels - Test method |
| ISO 8645-1988 | 轻便摩托车 轻合金轮 试验方法 | Mopeds; light-alloy wheels; test method |
| ISO 8667-1992 | 商用车辆和公共汽车 十字齿形齿轮箱法兰 T型 | Commercial vehicles and buses; cross-tooth gearbox flanges; type T |
| ISO 8686-2-2004 | 起重机.载荷和载荷组合的设计原则.第2部分:汽车起重机 | Cranes - Design principles for loads and load combinations - Part 2: Mobile cranes |
| ISO 8705-2005 | 机动脚踏两用车.重心位置的测量方法 | Mopeds - Measurement method for location of centre of gravity |
| ISO 8706-1990 | 二轮轻便摩托车 侧支架和中间支架的停车稳定性 | Two-wheeled mopeds; parking stability of side- and centre-stands |
| ISO 8709 Technical Corrigendum 1-1998 | 轻便摩托车 制动器和制动装置 试验和测量方法 技术勘误1 | Mopeds - Brakes and braking devices - Tests and measurement methods; Technical Corrigendum 1 |
| ISO 8709-1995 | 轻便摩托车 制动器和制动装置 试验和测量方法 | Mopeds - Brakes and braking devices - Tests and measurement methods |
| ISO 8710-1995 | 摩托车 制动器和制动装置 试验及测量方法 | () |
| ISO 8713-2005 | 电动道路车辆.词汇 | Electric road vehicles - Vocabulary |
| ISO 8714-2002 | 电动道路车辆.标准耗能和范围.承用车和轻型商用车辆的试验规程 | Electric road vehicles - Reference energy consumption and range - Test procedures for passenger cars and light commercial vehicles |
| ISO 8715-2001 | 道路电气车辆 道路运行特性 | Electric road vehicles - Road operating characteristics |
| ISO 8716-2001 | 道路车辆 牵引销 强度试验 | Road vehicles - Fifth wheel kingpins - Strength test |
| ISO 8717-2000 | 商用道路车辆 牵引连接器 强度试验 | Commercial road vehicles - Fifth wheel couplings - Strength tests |
| ISO 8718-2001 | 道路车辆 牵引杆牵引装置和用于铰接式牵引杆的挂钩孔 强度试验 | Road vehicles - Drawbar couplings and eyes for hinged drawbars - Strength tests |
| ISO 8720-1991 | 乘用车 机械式千斤顶规范 | Passengers cars; specifications for mechanical jacks |
| ISO 8721-1987 | 道路车辆 碰撞试验测量技术 光学仪器设备 | Road vehicles; Measurement techniques in impact tests; Optical instrumentation |
| ISO 8755-2001 | 商用道路车辆 40mm牵引挂钩孔 互换性 | Commercial road vehicles - 40 mm drawbar eye - Interchangeability |
| ISO 8760-1990 | 车间空气 一氧化碳质量浓度的测定 带直接指示的快速取样用检测管法 | Work-place air; determination of mass concentration of carbon monoxide; method using detector tubes for short-term sampling with direct indication |
| ISO 8761-1989 | 车间空气 二氧化氮质量浓度的测定 带直接指示的快速取样用检测管法 | Work-place air; determination of mass concentration of nitrogen dioxide; method using detector tubes for short-term sampling with direct indication |
| ISO 8762-1988 | 车间空气 氯乙烯的测定 活性碳管/气相色谱法 | Workplace air; determination of vinyl chloride; charcoal tube/gas chromatographic method |
| ISO 8789-1994 | 摩托车输送液化石油气用橡胶软管和软管组件 规范 | Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles - Specification |
| ISO 8818-1988 | 旅游居住车 旅居挂车 12 V 直流超低压电器设施 | Leisure accommodation vehicles; caravans; 12 V direct current extra low voltage electrical installations |
| ISO 8820-1-2002 | 道路车辆.熔断器.第1部分:定义和一般试验要求 | Road vehicles - Fuse-links - Part 1: Definitions and general test requirements |
| ISO 8820-2-2005 | 道路车辆.熔断器.第2部分:用户指南 | Road vehicles - Fuse-links - Part 2: User's guide |
| ISO 8820-3-2002 | 道路车辆.熔断体.第3部分:带接头的熔断体(刀闸) | Road vehicles - Fuse-links - Part 3: Fuse-links with tabs (blade type) |
| ISO 8820-4-2002 | 道路车辆.熔断器.第4部分:阴性接触(类型A)、螺栓接触(类型B) 及其试验夹具熔断器 | Road vehicles - Fuse links - Part 4: Fuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures |
| ISO 8820-5-2007 | 道路车辆.熔断器.第5部分:SF 30和SF 51类型的带轴向引线的熔断器(带状熔断器)和试验装置 | Road vehicles - Fuse-links - Part 5: Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixtures |
| ISO 8820-6-2007 | 道路车辆.熔断器.第6部分:单螺栓连接熔断器 | Road vehicles - Fuse-links - Part 6: Single-bolt fuse-links |
| ISO 8820-7-2007 | 道路车辆.熔断器.第7部分:额定电压为450V带焊片(G型)的熔断器 | Road vehicles - Fuse-links - Part 7: Fuse-links with tabs (Type G) with rated voltage of 450 V |
| ISO 8853-1989 | 赛车驾驶员的安全带 要求和测试方法 | Safety harnesses for competition drivers; requirements and test methods |
| ISO 8854-1988 | 道路车辆 带调节器的交流发电机 试验方法和一般要求 | Road vehicles; alternators with regulators; test methods and general requirements |
| ISO 8855 ADD 1-1992 | 道路车辆 车辆动力学和道路保持能力 词汇 补充1 | Road vehicles - Vehicle dynamics and road-holding ability - Vocabulary - Addendum 1 |
| ISO 8855-1991 | 道路车辆 车辆动力学和道路保持能力 词汇 两种语言版 | Road vehicles; vehicle dynamics and road-holding ability; vocabulary |
| ISO 8936-2007 | 休闲旅居车辆用遮篷.要求和试验方法 | Awnings for leisure accommodation vehicles - Requirements and test methods |
| ISO 8956-1986 | 整体式或非整体式车床用仿形装置验收条件 精度检验 | Acceptance conditions for copying attachments, integral or otherwise, for lathes; testing of the accuracy |
| ISO 9010-1997 | 同步带传动 汽车用带 | Synchronous belt drives - Automotive belts |
| ISO 9011-1997 | 同步带传动 汽车用带轮 | Synchronous belt drives - Automotive pulleys |
| ISO 9021-1988 | 摩托车 操纵件 型式、位置和功能 | Motorcycles; Controls; Types, positions and functions |
| ISO 9043-1991 | 轻便摩托车 惯性矩测量方法 | Mopeds; measurement method for moments of inertia |
| ISO 9089-1989 | 海上结构物 移动式近海装置 锚绞车 | Marine structures; mobile offshore units; anchor winches |
| ISO 9103-1987 | 道路车辆 压燃式发动机 23型螺纹拧入式喷油器 | Road vehicles; Compression-ignition engines; Screw-in injection nozzle holder, type 23 |
| ISO 9112-1991 | 载重汽车和公共汽车轮胎 测量轮胎滚动周长的方法 承载新轮胎 | Truck and bus tyres; method of measuring tyre rolling circumference; loaded new tyres |
| ISO 9128-2006 | 道路车辆.表示制动液类型的图形符号 | Road vehicles - Graphical symbols to designate brake fluid types |
| ISO 9129-1988 | 摩托车 惯性矩的测量方法 | Motorcycles; measurement methods for moments of inertia |
| ISO 9130-2005 | 摩托车.重心位置的测量方法 | Motorcycles - Measurement method for location of centre of gravity |
| ISO 9131-1993 | 三轮轻便摩托车和摩托车 尺寸 词汇 | Three wheeled mopeds and motorcycles; dimensions; vocabulary |
| ISO 9132-1990 | 二轮轻便摩托车和摩托车 质量 词汇 | Three-wheeled mopeds and motorcycles; masses; vocabulary |
| ISO 9141-1989 | 道路车辆 诊断系统 对数字信息交换的要求 | Road vehicles - Diagnostic systems - Requirements for interchange of digital information |
| ISO 9141-2 AMD 1-1996 | 道路车辆 诊断系统 第2部分:交换数字信息的 CARB 要求 修改1 | Road vehicles - Diagnostic systems - Part 2: CARB requirements for interchange of digital information; Amendment 1 |
| ISO 9141-2-1994 | 道路车辆 诊断系统 第2部分:交换数字信息的 CARB 要求 | Road vehicles; diagnostic systems; part 2: CARB requirements for interchange of digital information |
| ISO 9141-3-1998 | 道路车辆 诊断系统 第3部分:车辆和OBDⅡ扫描工具之间通信的检验 | Road vehicles - Diagnostic systems - Part 3: Verification of the communication between vehicle and OBD II scan tool |
| ISO 9158-1988 | 道路车辆 无铅汽油用管嘴 | Road vehicles; nozzle spouts for unleaded gasoline |
| ISO 9159-1988 | 道路车辆 含铅汽油和柴油用管嘴 | Road vehicles; nozzle spouts for leaded gasoline and diesel fuel |
| ISO 9258-1989 | 乘用车 刮刷系统 刮水片长度 | Passenger cars; wiper systems; wiper blade length |
| ISO 9259 AMD 1-2001 | 乘用车 风挡玻璃刮刷系统 刷臂与刮水片的连接 修改1 | Passenger cars - Windscreen wiper systems - Wiper arm-to-blade connections; Amendment 1 |
| ISO 9259-1991 | 乘用车 风挡玻璃刮刷系统 刷臂与刮水片的连接 | Passenger cars; windscreen wiper systems; wiper arm-to-blade connections |
| ISO 9310-1987 | 道路车辆 压燃式(柴油)发动机的烟度测量 对快速路检的概括 | Road vehicles; Smoke measurement of compression-ignition (diesel) engines; Survey of short in-service tests |
| ISO 9367-1-1989 | 滚装船上道路车辆捆绑和固定装置 一般要求 第1部分:商用车辆和车辆列车(半挂车除外) | Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships; general requirements; part 1: commercial vehicles and combinations of vehicles, semi-trailers excluded |
| ISO 9367-2-1994 | 滚装船上道路车辆捆绑和固定装置 一般要求 第2部分:半挂车 | Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships; general requirements; part 2: semi-trailers |
| ISO 938-1975 | 手动托盘搬运车 基本尺寸 | Hand-operated stillage trucks; Principal dimensions |
| ISO 9457-1-1991 | 道路车辆 米制起动电机小齿轮 第1部分:通常使用的小齿轮 | Road vehicles; metric starter motor pinions; part 1: currently used pinions |
| ISO 9457-2-1994 | 道路车辆.米制起动电机小齿轮.第2部分:具有20度压力角的小齿轮 | Road vehicles - Metric starter motor pinions - Part 2: Pinions with 20° pressure angle |
| ISO 9458-1988 | 乘用车 起动机的电气连接 | Passenger cars; Starter motor electrical connections |
| ISO 9486-1991 | 车间空气 挥发性氯化烃的测定 活性碳管/溶剂解析/气相色谱法 | Workplace air; determination of vaporous chlorinated hydrocarbons; charcoal tube/solvent desorption/gas chromatographic method |
| ISO 9487-1991 | 车间空气 挥发性芳香烃的测定 活性碳管/溶剂解析/气相色谱法 | Workplace air; determination of vaporous aromatic hydrocarbons; charcoal tube/solvent desorption/gas chromatographic method |
| ISO 9534-1989 | 道路车辆 燃油泵的电气连接 | Road vehicles; fuel pump electric connections |
| ISO 9565-1990 | 两轮摩托车 侧支架和中间支架的停车稳定性 | Two-wheeled motorcycles; parking stability of side- and centre-stands |
| ISO 9619 AMD 1-2002 | 客车.挡风玻璃刮水系统.试验方法.修改件1 | Passenger cars - Windscreen wiping systems - Test methods; Amendment 1 |
| ISO 9619-1992 | 客车.挡风玻璃刮水系统.试验方法 | Passenger cars; windscreen wiping systems; test method |
| ISO 9633-2001 | 自行车链条 特性和试验方法 | Cycle chains - Characteristics and test methods |
| ISO 9645-1990 | 声学 运动中的双轮机动自行车发射噪声的测量 工程法 | Acoustics; measurement of noise emitted by two-wheeled mopeds in motion; engineering method |
| ISO 9678-1991 | 航空器 自行式饮用水运送车 | Aircraft; self-propelled potable-water vehicle |
| ISO 9704-1990 | 乘用车 刮刷系统 轴端和臂孔 | Passenger cars; wiper systems; shaft ends and arm-holes |
| ISO 9785-2002 | 船舶和海上技术.可行驶内燃机车辆的货舱的通风.气流总需量的理论计算 | Ships and marine technology - Ventilation of cargo spaces where vehicles with internal combustion engines are driven - Calculation of theoretical total airflow required |
| ISO 9815-2003 | 道路车辆.承用车和挂车列车.横向稳定性试验 | Road vehicles - Passenger-car and trailer combinations - Lateral stability test |
| ISO 9816-2006 | 乘用车.车辆转弯时的停车反作用力.开环试验方法 | Passenger cars - Power-off reaction of a vehicle in a turn - Open-loop test method |
| ISO 9817-1991 | 乘用车 发动机冷却系统 注水口上的带限压阀加水口盖及其斜面座的尺寸 | Passenger cars; engine cooling systems; dimensions of pressure caps and their ramp seats on filler necks |
| ISO 9818-1991 | 乘用车 发动机冷却系统 带限压阀加水口盖的试验方法和标志 | Passenger cars; engine cooling systems; test methods and marking of pressure caps |
| ISO 9928-2-2007 | 起重机.起重机操作手册.第2部分:汽车起重机操作者 | Cranes - Crane driving manual - Part 2: Mobile crane operators |
| ISO 9981-1998 | 带传动 汽车工业用带轮和多楔带 PK型尺寸 | Belt drives - Pulleys and V-ribbed belts for the automotive industry - PK profile: Dimensions |
| ISO 9987-1990 | 摩托车 会车光束随载荷变化的测量 | Motorcycles; measurement of variation of dipped beam inclination as a function of load |
| ISO/PAS 11154-2006 | 道路车辆.车顶载物架 | Road vehicles - Roof load carriers |
| ISO/PAS 12158-2002 | 道路车辆.制动系统.温度的测量方法 | Road vehicles - Braking systems - Temperature mesuring methods |
| ISO/PAS 17684-2003 | 交通信息和控制系统.车载导航系统.将ITS消息集转换成ASB.1格式定义 | Transport information and control systems - In-vehicule navigation systems - ITS message set translator to ASN.1 format definitions |
| ISO/PAS 21308-1-2007 | 道路车辆.底盘和车身制造商(BEP)之间的产品数据交换.第1部分:一般原则 | Road vehicles - Product data exchange between chassis and bodywork manufacturers (BEP) - Part 1: General principles |
| ISO/PAS 22574-2007 | 道路车辆.制动衬面摩擦材料.目视检验 | Road vehicles - Brake linings frictions materials - Visual inspection |
| ISO/PAS 26183-2006 | 全球汽车工业的SASIG产品数据质量导则 | SASIG Product data quality guidelines for the global automotive industry |
| ISO/PAS 27145-1-2006 | 道路车辆.实施全球统一的道路车辆车载诊断系统技术法规(WWH－OBD)通讯要求.第1部分:总说明和应用定义 | Road vehicles - Implementation of WWH-OBD communication requirements - Part 1: General information and use case definition |
| ISO/PAS 27145-2-2006 | 道路车辆.实施全球统一重型发动机认证规程(WWH-OBD)要求.第2部分:与普通排放相关的数据词典 | Road vehicles - Implementation of WWH-OBD communication requirements - Part 2: Common emissions-related data dictionary |
| ISO/PAS 27145-3-2006 | 道路车辆.全球统一的重型发动机认证规程(WWH-OBD)要求的实施.第3部分:通用信息词典 | Road vehicles - Implementation of WWH-OBD communication requirements - Part 3: Common message dictionary |
| ISO/PAS 27145-4-2006 | 道路车辆.实施全球统一的道路车辆车载诊断系统技术法规(WWH－OBD)通讯要求.第4部分:车辆和试验设备间连接 | Road vehicles - Implementation of WWH-OBD communication requirements - Part 4: Connection between vehicle and test equipment |
| ISO/TR 10305-1-2003 | 道路车辆.电磁场强度测量设备的校正.第1部分:频率大于0Hz的电磁场测量设备 | Road vehicles - Calibration of electromagnetic field strength measuring devices - Part 1: Devices for measurement of electromagnetic fields at frequencies 0 Hz |
| ISO/TR 10305-2-2003 | 道路车辆.电磁场强度测量设备的校正.第2部分:9kHz-40GHz的电磁场传感器和探针(不包括天线)的校正用IEEE标准 | Road vehicles - Calibration of electromagnetic field strength measuring devices - Part 2: IEEE standard for calibration of electromagnetic field sensors and probes, excluding antennas, from 9 kHz to 40 GHz |
| ISO/TR 10314-1-1990 | 工业自动化 车间生产 第1部分:标准参考模型和要求识别的方法论 | Industrial automation; shop floor production; part 1: reference model for standardization and a methodology for identification of requirements |
| ISO/TR 10314-2-1991 | 工业自动化 车间生产 第2部分:标准参考模型和方法论的应用 | Industrial automation; shop floor production; part 2: application of the reference model for standardization and methodology |
| ISO/TR 10603-1992 | 道路车辆 关于照明和光信号装置的法规情况 | Road vehicles; legal situation concerning lighting and light-signalling devices |
| ISO/TR 10982-1998 | 道路车辆 评估发生位移的车辆乘员与展开气囊的相互影响的试验程序 | Road vehicles - Test procedures for evaluation out-of-position vehicle occupant interactions with deploying air bags |
| ISO/TR 11842-1997 | 道路车辆 各国照明装置法定配光要求的比较 | Road vehicles - Comparison of statutory photometric requirements in various countries for lighting devices |
| ISO/TR 12155-1994 | 商用车辆 倒车的障碍物探测装置 要求及试验 | Commercial vehicles - Obstacle detection device during reversing - Requirements and tests |
| ISO/TR 12343-1997 | 道路车辆 电工技术图示符号 | Road vehicles - Symbols for electrotechnical diagrams |
| ISO/TR 12349-1-1999 | 道路车辆 约束系统试验用假人 第1部分:成年假人 | Road vehicles - Dummies for restraint system testing - Part 1: Adult dummies |
| ISO/TR 12349-2-1999 | 道路车辆 约束系统试验用假人 第2部分:儿童假人 | Road vehicles - Dummies for restraint system testing - Part 2: Child dummies |
| ISO/TR 12350-2004 | 道路车辆.评价侧向碰撞中乘员保护的伤害风险曲线 | Road vehicles - Injury risk curves for evaluation of occupant protection in side impact |
| ISO/TR 12351-1999 | 道路车辆 在碰撞试验中头部触点和持续时间的测定 | Road vehicles - Determination of head contact and duration in impact tests |
| ISO/TR 13214-1996 | 道路车辆 儿童约束系统 法规和标准的汇编 | Road vehicles - Child restraint systems - Compilation of regulations and standards |
| ISO/TR 13219-1995 | 道路车辆 由于肩带的负荷造成的与Ⅲ型假人的胸部变形相关联的胸部伤害风险 | Road vehicles - Risk of thoracic injury associated with Hybrid III sternal deflection due to shoulder belt loading |
| ISO/TR 13487-1997 | 道路车辆的制动 对平均满发展减速度定义的考虑 | Braking of road vehicles - Considerations on the definition of mean fully developed deceleration |
| ISO/TR 1417-1974 | 汽车 座椅安全带固定点 | Automobiles; Anchorages for seat belts |
| ISO/TR 14645-1998 | 道路车辆 评估儿童约束系统与展开气囊相互作用的试验规程 | Road vehicles - Test procedures for evaluating child restraint system interactions with deploying air bags |
| ISO/TR 14933-2001 | 道路车辆 评价乘客对侧面撞击气袋的反应用的试验程序 | Road vehicles - Test procedures for evaluating occupant interactions with deploying side impact airbags |
| ISO/TR 15031-2-2004 | 道路车辆.与排放相关的诊断用车辆和外部设备间的通信.第2部分:术语、定义、缩略语和缩语 | Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 2: Terms, definitions, abbreviations and acronyms |
| ISO/TR 15409-2002 | 道路车辆.火花塞的热量额定值 | Road vehicles - Heat rating of spark plugs |
| ISO/TR 15497-2000 | 道路车辆 车辆软件开发指南 | Road vehicles - Development guidelines for vehicle based software |
| ISO/TR 15766-2000 | 道路车辆 行人保护 行人腿部试验装置的生物仿真度评定目标 | Road vehicles - Pedestrian protection - Targets for the assessment of the biofidelity of the pedestrian-leg test devices |
| ISO/TR 16352-2005 | 道路车辆.运输信息和控制系统车上指示的人类工程学特性.警报系统 | Road vehicles - Ergonomic aspects of in-vehicle presentation for transport information and control systems - Warning systems |
| ISO/TR 19961-2005 | 起重机.汽车起重机的安全规范 | Cranes - Safety code on mobile cranes |
| ISO/TR 4114-1979 | 道路车辆 旅居车和轻型挂车 球形连接器的静态载荷 | Road vehicles; Caravans and light trailers; Static load on ball couplings |
| ISO/TR 7861-2003 | 道路车辆.评价乘客防正面冲击用伤害风险曲线 | Road vehicles - Injury risk curves for evaluation of occupant protection in frontal impact |
| ISO/TR 7882-1986 | 道路车辆 制动衬片 挡热板装置的热传导率测定 | Road vehicles; Brake linings; Determination of thermal conductivity by guarded hot-plate apparatus |
| ISO/TR 8357-1996 | 道路车辆 为车辆识别代码(VIN)系统和世界零部件制造厂商识别代码(WPMZ)分配世界制造厂商识别码(WMZ)的实施 | Road vehicles - Instructions for the implementation of the assignment of world manufacturer identifier (WMI) codes for vehicles identification number (VIN) systems and for world parts manufacturer identifier (WPMI) codes |
| ISO/TR 8725-1988 | 道路车辆 一个周期正弦输入的瞬态开环响应的试验方法 | Road vehicles; transient open-loop response test method with one period of sinusoidal input |
| ISO/TR 8726-1988 | 道路车辆 使用伪随机转向输入的瞬态开环响应的试验方法 | Road vehicles; transient open-loop response test method with pseudo-random steering input |
| ISO/TR 9511-1991 | 道路车辆 驾驶员手控范围 车内检验规程 | Road vehicles; driver hand-control reach; in-vehicle checking procedure |
| ISO/TR 9790-1999 | 道路车辆 仿真人侧面碰撞假人 评定假人生物仿真度的横向碰撞反应要求 | Road vehicles - Anthropomorphic side impact dummy - Lateral impact response requirements to assess the biofidelity of the dummy |
| ISO/TR 9819-1991 | 道路车辆 光信号装置配光要求的法规比较表 | Road vehicles; comparison tables of regulations on photometric requirements of light signalling devices |
| ISO/TS 11155-1-2001 | 道路车辆 乘员舱内空气滤清器 第1部分:颗粒过滤试验 | Road vehicles - Air filters for passenger compartments - Part 1: Test for particle filtration |
| ISO/TS 11155-2-2002 | 道路车辆.乘员舱内空气滤清器.第2部分:气体过滤试验 | Road vehicles - Air filters for passenger compartments - Part 2: Test for gaseous filtration |
| ISO/TS 12104-2003 | 道路车辆.变速器类型.助力换档手动变速器和带手动换档模式的自动变速器 | Road vehicles - Gearshift patterns - Manual transmissions with power-assisted gearchange and automatic transmissions with manual-gearshift mode |
| ISO/TS 13499-2003 | 道路车辆.冲击试验用多媒体数据交换格式 | Road vehicles - Multimedia data exchange format for impact tests |
| ISO/TS 14505-1-2007 | 热环境人类工效学.评估机动车内热环境.第1部分:评估热应力的原理和方法 | Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Part 1: Principles and methods for assessment of thermal stress |
| ISO/TS 15007-2-2001 | 道路车辆 驾驶员对交通情况和控制系统的目视行为的测量 第2部分：设备和程序 | Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 2: Equipment and procedures |
| ISO/TS 16553-2006 | 道路车辆.数据电缆.试验方法和要求 | Road vehicles - Data cables - Test methods and requirements |
| ISO/TS 16949-2002 | 质量管理体系.汽车生产和有关服务的部分组织应用ISO 9001-2000的特殊要求 | Quality management systems - Particular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations |
| ISO/TS 16951-2004 | 道路车辆.交通信息和控制系统的人类工效学方面.提供给司机的车载信息的优先度测定规程 | Road vehicles - Ergonomic aspects of transport information and control systems (TICS) - Procedures for determining priority of on-board messages presented to drivers |
| ISO/TS 17261 Technical Corrigendum 1-2005 | 智能运输系统.自动车辆和设备识别.联运货物运输体系和术语.技术勘误1 | Intelligent transport systems - Automatic vehicle and equipment identification - Intermodal goods transport architecture and terminology; Technical Corrigendum 1 |
| ISO/TS 17261-2005 | 智能运输系统.自动车辆和设备识别.联运货物运输体系和术语 | Intelligent transport systems - Automatic vehicle and equipment identification - Intermodal good transport architecture and terminology |
| ISO/TS 17262-2003 | 自动车辆和设备识别.货物联运.编号结构和数据结构 | Automatic vehicle and equipment identification - Intermodal goods transport - Numbering and data structures |
| ISO/TS 17263-2003 | 自动车辆和设备识别.货物联运.系统参数 | Automatic vehicle and equipment identification - Intermodal goods transport - System parameters |
| ISO/TS 17573-2003 | 道路运输和运输量远程信息管理.电子收费(EFC).车辆相关的运输服务的系统体系结构 | Road Transport and Traffic Telematics--Electronic Fee Collection (EFC)--Systems architecture for vehicle related transport services |
| ISO/TS 20119-2002 | 道路车辆.中心管理量化的试验方法.直线驱动离差矩阵的测定 | Road vehicles - Test methods for the quantification of on-centre handling - Determination of dispersion metrics for straight-line driving |
| ISO/TS 20825-2003 | 道路车辆.拉杆连接件、拉杆眼、转盘主销、钩连接件和环形眼.使用中的机械连接件的磨损极限值 | Road vehicles - Drawbar couplings, drawbar eyes, fifth wheel kingpins, hook couplings and toroidal eyes - Wear limits for in-use mechanical couplings |
| ISO/TS 21609-2003 | 道路车辆.配件市场射频传输设备安装用EMC指南 | Road vehicles - EMC guidelines for installation of aftermarket radio frequency transmitting equipment |
| JIS D0108-1985 | 汽车排放废气污染控制的相关术语汇编 | Glossary of terms relating to control of air pollutions from automobile emissions |
| JIS D0110-1988 | 汽车装备相关术语汇编 | Glossary of terms relating to equipments of automobiles |
| JIS D1019-1982 | 汽车牵引力的试验方法 | Traction test method of automobiles |
| JIS E4045-1994 | 货车.组装后检查的通用要求 | Freight cars -- General requirements for the inspection on completion of construction |
| 编号 | 中文名称 | 英文名称 |