| 编号 | 中文名称 | 英文名称 |
|---|
| NF A84-432-2003
| 气焊设备.焊接、切割和相关工艺的气瓶上用整体流量计式调节器.分类、规范和试验
| (Gas welding equipment - Integrated flowmeter regulators used on cylinders for welding, cutting and allied processes - Classification, specification and tests.)
|
| NF A84-433-2001
| 气焊设备.小于等于300bar的焊接、切削及相关工艺用多头管系用压力调节器
| (Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 300 bar.)
|
| NF C47-110-1981
| 家用自动装置.环境恒温调节器
| (Automatic devices for household use. Rooms thermostats.)
|
| NF C47-741-1993
| 家用和类似用途的自动电控制设备.第2部分:能量调节器的特殊要求
| (Automatic electrical controls for household and similar use. Part 2 : particular requirements for energy regulators.)
|
| NF C47-744-1998
| 家用和类似用途的自动电控制设备.第2部分:电调节器的特殊要求
| (Automatic electrical controls for household and similar use. Part 2 : particular requirements for electric actuators.)
|
| NF C47-744/A1-2001
| 家用及类似用途自动电控制装置.第2部分:电调节器的特殊要求
| (Automatic electrical controls for household and similar use - Part 2-14 : particular requirements for electric actuators.)
|
| NF C53-231-2002
| 半导体电力变换器.可调速电驱动装置.一般要求.第1部分:直流电动机的额定值规范
| (Semiconductor power convectors - Adjustable speed electric drive systems - General requirements - Part 1 : rating specifications, particularly for D.C. motor drives.)
|
| NF C53-240-1-1999
| 可调速的电驱动系统.第1部分:一般要求.低电压可调速的直流电驱动系统的额定值规范
| (Adjustable speed electrical power drive systems - Part 1 : general requirements - Rating specifications for low voltage adjustable speed d.c. power drive systems.)
|
| NF C53-240-2-1999
| 可调速的电驱动系统.第2部分:一般要求.低电压可调频的交流电驱动系统的额定值规范
| (Adjustable speed electrical power drive systems - Part 2 : general requirements - Rating specifications for low voltage adjustable frequency a.c. power drive systems.)
|
| NF C53-240-4-2003
| 可调速的电力传动系统.第4部分:一般要求.1000V至35KV交流电力传动系统的额定规格
| (Adjustable speed electrical power drive systems - Part 4 : general requirements - Rating specifications for a.c. power drive systems above 1 000 V a.c. and not exceeding 35 kV.)
|
| NF C53-240-5-1-2003
| 可调速的电驱动系统.第5-1部分:安全要求.电、热及能量
| (Adjustable speed electrical power drive systems - Part 5-1 : safety requirements - Electrical, thermal and energy.)
|
| NF C79-143-1999
| 机械安全.指示、标记和活动.调节器的定位和操作要求
| (Safety of machinery. Indication, marking and actuation. Part 3 : requirements for the location and operation of actuators.)
|
| NF D18-204-2003
| 卫生设备旋塞.流速调节器的一般规范
| (Sanitary tapware - General specifications for flow rate regulators.)
|
| NF D36-302-1991
| 家用煤气设备用低压后力调节器
| (Pressure governors for gas appliances for inlet pressures up to 200 mbar.)
|
| NF D36-307-2002
| 容量小于或等于4kg/h、最大输出压小于或等于200mbar的不可调低压调节器及其相关的用于丁烷、丙烷或其混合物
| (Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar with a capacity of less than or equal to 4 kg/h, and their associated safety devices for buta)
|
| NF D36-361-1998
| 气体燃烧器和燃气设施用零点调节器
| (Zero governors for gas burners and gas burning appliances.)
|
| NF E29-171-1999
| 入口压力最大达100bar的气压调节器
| (Gas pressure regulators for inlet pressures up to 100 bar.)
|
| NF E29-171/A1-2001
| 入口压力100巴以下的气体压力调节器
| (Gas pressure regulators for inlet pressures up to 100 bar.)
|
| NF E29-179-2002
| 入口压力达100巴的压力调节器和相关安全装置用弹性体
| (Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar.)
|
| NF E49-330-1-2000
| 气流动力.压缩空气调节器和过滤器调节器.第1部分:包括在供应商和产品标记要求内的的主要特性
| (Pneumatic fluid power - Compressed air regulators and filters-regulators - Part 1 : main characteristics to be included in literature from suppliers and product-marking requirements.)
|
| NF E49-330-2-2000
| 气流动力.压缩空气调节器和过滤器调节器.第2部分:包括在供应商文件内的主要特性测定的试验方法
| (Pneumatic fluid power - Compressed air regulators and filter-regulators - Part 2 : test methods to determine the main characteristics to be included in literature from suppliers.)
|
| NF E51-718-1998
| 建筑物通风.气体终端设备.调节器和阀门的动力学试验
| (Ventilation for buildings. Air terminal devices. Aerodynamic testing of dampers and valves.)
|
| NF L34-420-1966
| 操纵转速计和螺旋浆调速器等用挠性轴.(RECH.)
| (FLEXIBLE SHAFTS FOR CONTROLLING TACHOMETERS,PROPELLOR REGULATORS,ETC. (RECH.).)
|
| NF R13-107-1970
| 发电机电磁调节器.螺钉固定
| (ELECTROMAGNETIC REGULATORS FOR GENERATORS. SCREW MOUNTING.)
|
| NF R13-201-1966
| 交流发电机及其调节器用接线柱
| (TERMINALS FOR ALTERNATORS AND THEIR REGULATORS.)
|
| NF S87-010-1996
| 大型钟表.表针调节器
| (Hall clocks. Hands adjustment.)
|
| NF S95-159-1997
| 与医疗麻醉剂一起使用的压力调节器.第1部分:压力调节器和带流量测量装置的压力调节器(欧洲标准EN 738-1)
| (PRESSURE REGULATORS FOR USE WITH MEDICAL GASES. PART 1 : PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW METERING DEVICES. (EUROPEAN STANDARD EN 738-1).)
|
| NF S95-159/A1-2002
| 医用气体压力调节器.第1部分:压力调节器和带流量计的压力调节器
| (Pressure regulators for use with medical gases - Part 1 : pressure regulators and pressure regulators with flow metering devices.)
|
| NF S95-171-1999
| 医用气体用压力调节器.多功能的和线状压力调节器(欧洲标准738-2)
| (PRESSURE REGULATORS FOR USE WITH MEDICAL GASES. PART 2 : MANIFOLD AND LINE PRESSURE REGULATORS. (EUROPEAN STANDARD EN 738-2).)
|
| NF S95-178-1998
| 医用气体用压力调节器.第3部分:与钢瓶阀门相结合的压力调节器(欧洲标准EN 738-3)
| (PRESSURE REGULATORS FOR USE WITH MEDICAL GASES. PART 3 : PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES. (EUROPEAN STANDARD EN 738-3).)
|
| NF S95-178/A1-2002
| 医用气体压力调节器.第3部分:带瓶阀的压力调节器
| (Pressure regulators for use with medical gases - Part 3 : pressure regulators integrated with cylinder valves.)
|
| NF S95-179-1998
| 用于医用气体的压力调节器.第4部分:结合医用设备的低压调节器(欧洲标准EN 738-4)
| (PRESSURE REGULATORS FOR USE WITH MEDICAL GASES. PART 4 : LOW-PRESSURE REGULATORS INTENDED FOR INCORPORATION INTO MEDICAL EQUIPMENT. (EUROPEAN STANDARD EN 738-4).) |
| NF S95-179/A1-2002
| 医用气体压力调节器.第4部分:装入医疗设备的低压调节器
| (Pressure regulators for use with medical gases - Part 4 : low-pressure regulators intended for incorporation into medical equipment.)
|
| NF T51-114-1979
| 塑料.在特定温度下、在温度调节器壳体内机械特性的测定方法
| (PLASTICS. METHODS FOR DETERMINING MECHANICAL CHARACTERISTICS AT TEMPERATURE SPECIFIED IN A ENCLOSURE WITH REGULATION OF THE TEMPERATURE.)
|
| NF X35-101-1-1997
| 机械安全.显示和控制调节器设计的人类工效学要求.第1部分:人与显示和控制调节器相互作用的一般原则(欧洲标
| (SAFETY OF MACHINERY. ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS. PART 1 : GENERAL PRINCIPLES FOR HUMAN INTERACTIONS WITH DISPLAYS AND CONTROL ACTUATORS. (EUROPEAN STANDARD EN 894-1).)
|
| NF X35-101-2-1997
| 机械安全.显示和控制调节器设计的人类工效学要求.第2部分:显示
| (Safety of machinery. Ergonomics requirements for the design of displays and control actuators. Part 2 : displays.)
|
| 编号 | 中文名称 | 英文名称 |
|---|