| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| NF A06-392-2-2003 | 黑色金属的化学分析.钢铁中的氧含量测定.第2部分:在惰性气体中融化后的红外法 | (Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2 : infrared method after fusion under inert gas.) |
| NF A09-490-1988 | 无损检验.密封检验.气体密封规范和检验用推荐方法 | (NON DESTRUCTIVE TESTING. TESTING FOR LEAK TIGHTNESS. RECOMMENDED PRACTICES FOR THE SPECIFICATION AND TESTING OF GAS-TIGHTNESS.) |
| NF A09-492-2001 | 无损检验.渗漏试验.痕量气体方法 | (Non-destructive testing - Leak testing - Tracer gas method.) |
| NF A35-056-1984 | 钢铁产品.气体保护电弧焊和潜弧焊的焊条用合金钢和非合金钢线材.等级和型号 | (Iron and steel. Wire rod in non-alloy and alloy steel for colled electrodes for gas shielded are welding and submerged arc welding. Grades and types.) |
| NF A36-211-1997 | 焊接气体气缸用薄钢板和条带 | (Steel sheet and strip for welded gas cylinders.) |
| NF A51-120-1996 | 铜和铜合金.无缝的.应用于环境卫生和加热的水和气体的圆形铜管( 欧洲标准EN1057) | (Copper and copper alloys. Seamless, round copper tubes for water and gas in sanitary and heating applications.) |
| NF A51-127-2001 | 铜和铜合金.医用气体或真空用的无缝圆铜管 | (Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum.) |
| NF A72-120-1973 | 钢铁厂.气体管道和大直径阀.带法兰的接头（PN6） | (LARGE DIAMETER PIPES AND VALVES FOR GASEOUS FLUIDS. FLANGE CONNECTIONS PN 6.) |
| NF A81-010-1994 | 焊条.气体保护电弧焊和切割用气体 | (Welding consumables. Shielding gases for arc welding and cutting.) |
| NF A81-011-1991 | 编号.用于惰性气体弧焊的钨电报和等离子切割 | (Tungsten electrodes for inert gas shielded arc welding, and for plasma cutting and welding. Codification.) |
| NF A81-311-1994 | 碳钢、碳锰钢和微合金钢的气体金属电弧焊丝状电极和电积物的分类 | (Welding consumables. Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification.) |
| NF A81-325-1997 | 焊条.非合金钢和细晶粒钢制惰性气体保护钨焊接用棒材,线材和镀层 | (WELDING CONSUMABLES. RODS, WIRES AND DEPOSITS FOR TUNGSTEN INERT GAS WELDING OF NON-ALLOY AND FINE GRAIN STEELS. CLASSIFICATION. (EUROPEAN STANDARD EN 1668).) |
| NF A81-350-1997 | 焊条.非合金钢及细粒钢的有和无气体保护的金属电弧焊接用管状焊丝.分类(欧洲标准EN 758) | (Welding consumables. Tubular cored electrodes for metal arc welding with and without a gas shield of non aloy and fine grain steels. Classification.) |
| NF A81-352-2000 | 焊条.高强度钢的气体保护电弧焊用管状有心电焊条.分类 | (Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of high strength steels - Classification.) |
| NF A84-090-1992 | 气焊和相关工艺用设备的气体密封 | (GAS TIGHTNESS OF EQUIPMENT FOR GAS WELDING AND ALLIED PROCESS. (EUROPEAN STANDARD EN 29090).) |
| NF A87-011-1994 | 带有电焊条的金属电弧熔焊、气体保护金属弧焊及气焊.钢接头的制备 | (Metal-arc welding with covered electrode, gas-shielded metal-arc welding and gas welding. Joint preparations for steel.) |
| NF A87-013-3-2001 | 焊接和相关工艺.接头预处理的推荐方法.第3部分:铝和铝合金的金属焊条惰性气体保护焊和钨极惰性气体保护焊 | (Welding and allied processes - Recommendations for joint preparation - Part 3 : metal inert gas welding and tungsten inert gas welding of aluminium and its alloys.) |
| NF A88-200-1-2002 | 焊接和相关过程中的健康和安全.电弧焊接产生的烟尘和气体取样的实验室方法.第1部分:排放率测定和颗粒烟尘的 | (Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 1 : determination of emission rate and sampling for analysis of partic) |
| NF A88-200-2-2003 | 焊接和相关工艺中的卫生和安全.对电弧焊产生的烟尘和气体取样的实验室方法.第2部分:除臭氧外气体的排放率测 | (Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 2 : determination of emission rates of gases, except ozone.) |
| NF A88-200-3-2003 | 焊接和相关工艺中的卫生和安全.对电弧焊产生的烟尘和气体取样的实验室方法.第3部分:用固定点测量法测定臭氧 | (Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 3 : determination of ozone concentration using fixed point measurement) |
| NF A88-202-1-2001 | 焊接和有关工艺中的健康和安全.工作人员呼吸区空气粒子和气体的取样.第1部分:气体粒子的取样 | (Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1 : sampling of airborne particles.) |
| NF A88-202-2-2000 | 焊接和有关工艺中的健康和安全.工作人员工作区空气粒子和气体的取样.第2部分:气体取样 | (Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2 : sampling of gases.) |
| NF A89-701-3-2003 | CO2激光切割、焊接机的验收试验.第3部分:气体流量和压力测量仪的校准 | (Acceptance tests for CO2-laser beam machines for welding and cutting - Part 3 : calibration of instruments for measurement of gas flow and pressure.) |
| NF B42-003-1994 | 高技术陶瓷.陶瓷粉末的试验方法.第3部分:非氧化物氧含量的气体热萃取法测定 | (ADVANCED TECHNICAL CERAMICS. METHODS OF TEST FOR CERAMIC POWDERS. PART 3 : DETERMINATION OF THE OXYGEN CONTENT OF NON-OXYDES BY THERMAL EXTRACTION WITH A CARRIER GAS. (EUROPEAN STANDARD EN 725-3).) |
| NF B51-272-2-1995 | 木质人造板.甲醛释放量的测定.气体分析法测量甲醛释放量 | (WOOD-BASED PANELS. DETERMINATION OF FORMALDEHYDE RELEASE. PART 2 : FORMALDEHYDE RELEASE BY THE GAS ANALYSIS METHOD. (EUROPEAN STANDARD EN 717-2).) |
| NF B54-173-1995 | 胶合板.气体分析法测定粘度的方法 | (PLYWOOD. FORLAMDEHYDE RELEASE CLASSES DETERMINED BY THE GAS ANALYSIS METHOD. (EUROPEAN STANDARD EN 1084).) |
| NF C01-212-1990 | 电工词汇.第212章:绝缘固体、液体和气体 | (Electrotechnical vocabulary. Chapter 212 : insulating solids, liquids and gases.) |
| NF C20-760-1996 | 环境试验.第2部分:试验.试验Ke:流动混合气体的腐蚀试验 | (Environmental testing. Part 2 : tests. Test Ke : flowing mixed gas corrosion test.) |
| NF C23-521-2000 | 潜在爆炸性气体环境用电器.“n“型防护装置 | (Electrical apparatus for potentially explosive atmospheres - Type of protection “n“.) |
| NF C23-544-2000 | 家用易燃气体监测用电器设备.选择、安装、使用和维修指南 | (Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use and maintenance.) |
| NF C23-554-1992 | 可燃性气体的检测和测量电器仪表.一般要求和试验方法 | (Electrical apparatus for the detection and measurement of combustible gases. General requirements and test methods.) |
| NF C23-554/A1-1998 | 探测用电器和测量可燃气体.一般要求和检验方法.NF EN 50 054-1992的修改件1 | () |
| NF C23-555-1992 | 可燃性气体的检测和测量电气仪表.测量空气中沼气含量不超过5%的I组电气仪表的性能要求 | (Electical apparatus for the detection and measurement of combustible gases. Performance requirements for group I apparatus indicating up to 5 per cent (V/V) methane in air.) |
| NF C23-556-1992 | 可燃性气体检测和测量电气仪表.测量空气中沼气含量为100%及其以下的I组电气仪表的性能要求 | (Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for group I apparatus indicating up to 100 per cent (V/V) methane in air.) |
| NF C23-557-1992 | 可燃性气体的检测和测量电气仪表.测量低于爆炸极限100%以下的Ⅱ组电气仪表的性能要求 | (Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for group II apparatus indicating up to 100 per cent lower explosive limit.) |
| NF C23-558-1992 | 可燃性气体检测和测量电气仪表.测量瓦斯为100%及其以下的Ⅱ组电气仪表的性能要求 | (Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for group II apparatus indicating up to 100 per cent (V/V) gas.) |
| NF C23-570-2000 | 电磁兼容性.可燃气体、有毒气体或氧气的检测和测量用电气设备 | (Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen.) |
| NF C23-571-2002 | 检测和测量可燃气体、有毒气体和氧气的电气设备.使用软件和/或数字技术的设备的要求和试验 | (Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies.) |
| NF C23-579-10-2003 | 爆炸性气体环境用电气设备.第10部分:危险场所的分类 | (Electrical apparatus for explosive gas atmospheres - Part 10 : classification of hazardous areas.) |
| NF C23-579-14-1999 | 爆炸气体环境用电气设备.第14部分:危险区(矿井除外)的电气设备 | (Electrical apparatus for explosive gas atmospheres. Part 14 : electrical installations in hazardous areas (other than mines).) |
| NF C23-579-17-2003 | 爆炸性气体环境用电气设备.第17部分:危险场所(矿井除外)电气设备的检验和维护 | (Electrical apparatus for explosive gas atmospheres - Part 17 : inspection and maintenance of electrical installations in hazardous areas (other than mines).) |
| NF C23-594-2000 | 家用易燃气体监测用电气设备.试验方法和性能要求 | (Electrical apparatus for the detection of combustibe gases in domestic premises - Test methods and performance requirements.) |
| NF C27-224-1992 | 浸油电设备气体和油的抽样指南和游离及溶解气体的分析指南 | (Guide for the sampling of gases and of oil from oil-filled electrical equipment and for the analysis of free and dissolved gases.) |
| NF C27-230-1986 | 电工技术用流体.在电压和电离作用下，液化绝缘气体 | (Fluids for electrotechnical applications. Gassing of insulating liquids under electrical stress and ionization.) |
| NF C27-239-1999 | 使用中的浸矿物油的电气设备.溶解和游离气体分析说明指南 | (Mineral oil-impregnated electrical equipment in service. Guide to the interpretation of dissolved and free gases analysis.) |
| NF C27-240-1993 | 浸渍绝缘材料.关于电气设备制造试验的溶解气体的分析应用(欧洲标准 EN 61 181) | (Impregnated insulating materials. Application of dissolved gas analysis (dga) to factory tests on electrical equipment.) |
| NF C32-074-1993 | 电缆材料燃烧过程中的气体试验.通过测定PH及导电性测定气体的腐蚀程度 | (TEST ON GASES EVOLVED DURING THE COMBUSTION OF MATERIALS FROM CABLES. DETERMINATION OF DEGREE OF ACIDITY (CORROSIVITY) OF GASES BY MEASURING PH AND CONDUCTIVITY.) |
| NF C32-074-21-2000 | 失火情况下电缆的一般试验方法.电缆材料燃烧时产生的气体的试验.第2-1部分:程序.氢卤酸气体量的确定 | (Common test methods for cables under fire conditions - Test on gases evolved during combustion of materials from cables - Part 2-1 : procedures - Determination of the amount of halogen acid gas.) |
| NF C32-102-13/A1-2000 | 额定电压达到和包括450/750V的橡胶绝缘电缆.第13部分:用交叉链接聚合物屏蔽和绝缘的及有低烟雾和腐蚀性气体 | (Rubber insulated cables of rated voltages up to and including 450/750 V - Part 13 : single and multicore flexible cables, isulated and sheathed with crosslinked polymer and having low emission of smok) |
| NF C32-102-9-1999 | 额定电压不大于450/750V的橡胶绝缘电缆.第9部分:烟和腐蚀性气体低发散率的固定布线用单芯非铠装电缆 | (RUBBER INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V. PART 9 : SINGLE CORE NON-SHEATHED CABLES FOR FIXED WIRING HAVING LOW EMISSION OF SMOKE AND CORROSIVE GASES.) |
| NF C32-500/A1-2003 | 无载额定输出电压大于1kV不超过10kV的信号和气体放电管装置用电缆 | (Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV.) |
| NF C42-726-1997 | 测量、控制和实验室用电气设备的安全要求.第2-043部分:使用热空气或热惰性气体的实验室处理和医疗材料处理 | (Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-043 : particular requirements for dry heat sterilizers using either hot air or inert gas for the treatment of medical materials, and for laboratory processes) |
| NF C46-251-1994 | 气体分析仪性能表示.第1部分:通则 | (Expression of performance of gas analyzers. Part 1 : general.) |
| NF C46-252-1994 | 气体分析器性能表示.第2部分:氧气(高温电化学感应器)(EN 61 207-2) | (Expression of performance of gas analyzers. Part 2 : oxygen in gas (utilizing high-temperature electrochemical sensors).) |
| NF C46-253-2002 | 气体分析仪性能表示.第3部分:顺磁氧分析仪 | (Gas analysers - Expression of performance - Part 3 : paramagnetic oxygen analysers.) |
| NF C46-256-1994 | 气体分析器性能表示.第6部分:光度计分析器(EN 61 207-6) | (Expression of performance of gas analysers. Part 6 : photometric analyzers.) |
| NF C52-108-1969 | 变压器.带两个触头的测定放出气体的防护装置.特性及制造规则 | (TRANSFORMERS TWO-CONTACT GAS-ACTUATED PROTECTIVE DEVICES. CHARACTERISTICS AND CONSTRUCTIONAL REQUIREMENTS.) |
| NF C52-109-1969 | 变压器.带一个触头的测定放出气体的防护装置.特性和制造规则 | (TRANSFORMERS. GAS-ACTUATED PROTECTIVE DEVICES. CHARACTERISTICS AND CONSTRUCTIONAL REQUIREMENTS.) |
| NF C52-216-2-2002 | 变压器和反应堆配件.第2部分:带保油箱的液体浸渍变压器和反应堆用气体和油启动的继电器 | (Power transformer and reactor fittings - Part 2 : gas and oil actuated relay for liquid immersed transformers and reactors with conservator.) |
| NF C61-743-1-2002 | 低压电涌保护装置元件.第311部分:气体放电管规范 | (Components for low-voltage surge protective devices - Part 311 : specification for gas discharge tubes (GDT).) |
| NF C64-410-1996 | 额定电压72.5Kv及以上的气体绝缘的铁壳式开关设备 | (Gaz-insulated metal-enclosed switchgear for rated voltages of 72,5 kv and above.) |
| NF C64-410/A11-2001 | 额定电压72.5kV及以上的气体绝缘的金属封闭式开关装置 | (Gas-insulated metal-enclosed switchgear for rated voltages of 72,5 kV and above.) |
| NF C64-4511-1993 | 置于气体压力下的高压装置用铝和铝合金煅制外壳.(欧洲标准 EN 50064).补充件1 | () |
| NF C64-455-1993 | 金属封闭气体填充的高压开关和控制设备的铸造树脂分隔部分(欧洲标准EN 50089) | (Cast resin partitions for metal enclosed gas-filled high voltage switchgear and controlgear.) |
| NF C73-854/A1-2002 | 家用和类似用途的电器安全.第2部分:使用液体或气体的家用表面清洗设备的特殊要求 | (Safety of household and similar electrical appliances - Part 2 : particular requirements for surface-cleaning appliances for household use employing liquids or steam.) |
| NF C93-400-11-14-1997 | 电子设备用机电元件.基本试验过程和测量方法.第11部分:气候试验.第14节:试验11p:单一流动气体腐蚀试验 | (Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 11 : climatic tests. Section 14 : test 11p : flowing single gas corrosion test.) |
| NF C93-400-11-7-1997 | 电子设备用机电元件.基本试验过程和测量方法.第11部分:气候试验.第7节:试验11g:混合流动气体腐蚀试验 | (Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 11 : climatic tests. Section 7 : test 11g : flowing mixed gas corrosion test.) |
| NF C93-471-14-1997 | 电子设备用机电元件.基本试验规程和测量方法.气候试验.试验11p.流动的单种气体腐蚀试验.(欧洲标准 EN 60 51 | (ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 11 : CLIMATIC TESTS. SECTION 14 : TEST 11P. FLOWING SINGLE GAS CORROSION TEST. (EUROPEAN STANDARD EN 60 512-11-14).) |
| NF C93-471-7-1997 | 电子设备的电机元件.基本试验过程和测量方法.第11部分:气候试验.第7节:试验11G:流动混合气体腐蚀试验 | (ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 11 : CLIMATIC TESTS. SECTION 7 : TEST 11G : FLOWING MIXED GAS CORROSION TEST. (EUROPEAN STANDARD EN 60 512-11-7).) |
| NF C93-902-28-1998 | 纤维光学连接装置和无源元件.基本试验和测量程序.第2-28部分:试验.工业气体(二氧化硫)(欧洲标准EN 61 300-2 | (Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 2-28 : tests. Industrial atmosphere (sulphur dioxide).) |
| NF C96-022-7-2002 | 半导体器件.机械和气候试验方法.第7部分:其他残余气体的分析和内部水分含量的测量 | (Semiconductor devices - Mechanical and climatic test methods - Part 7 : internal moisture content measurement and the analysis of other residual gases.) |
| NF D30-003-1992 | 取暖设备.气体.液体燃料、气体燃料.两用热水 集中采暖锅炉.按热规程所必须的热水供应系统参数的测定 | (HEATING. GAS. LIQUID FUELS,GASEOUS FUEL. DOUBLE HOT WATER CENTRAL HEATING BOILERS. DETERMINATION OF HOT WATER PRODUCTION SYSTEM PARAMETERS NECESSARY FOR APPLICATION OF THE HEAT RULES.) |
| NF D30-500-2003 | 试验气体.试验压力.仪器种类 | (Test gases - Test pressures - Appliance categories.) |
| NF D30-500/A1-1997 | 试验气体.试验压力.仪器种类.修改件1 | (Test gases - Test pressures - Appliances categories.) |
| NF D35-001-1965 | 根据加热容量对各供热单位(气体、液体、固体燃料)的选择 | (CHOICE OF AN INDIVIDUAL HEATING UNIT (SOLID,LIQUID AND GASEOUS FUELS) ACCORDING TO THE VOLUME TO BE HEATED.) |
| NF D35-322-1997 | 配有气体燃烧器的卫生设备用气体燃烧连续热水器(欧洲标准EN 26) | (Gas-fired instantaneous water heaters for sanitory uses production, fitted with atmospheric burners.) |
| NF D35-330-1994 | 燃气集中加热锅炉.输入热量不超过70kW的B11和B11BIS型带气体燃烧器的锅炉 | (Gaz-fired central heating boilers. Type B11 and B11BIS boilers fitted with atmospheric burners of nominal heat imput not exceeding 70 kw.) |
| NF D35-334-1985 | 固体或液体燃料转换成气体的集中供热设备.大气式燃烧器 | (Equipment for the conversion to gas of central heating boilers built for solid and liquid fuels. Atmospheric burners.) |
| NF D35-337-2001 | 加热.气体.液体燃料和固体燃料.与排放燃烧产物的机械装置相连的热输出不超过70kW的燃气式集中加热锅炉 | (Heating - Gas - Liquid fuel, solid fuel - Gas-fired central heating boilers of heat output not exceeding 70 kW designed to be connected to a mechanical installation for the evacuation of the combustio) |
| NF D35-339-1980 | 气体燃料功率在70kW以下的常压组合锅炉和锅炉群 | (GAS FIRED MULTI-FURNACE BOILERS AND GROUPS OF BOILERS WITH ATMOSPHERIC BURNERS,WITH A TOTAL RATED HEAT OUTPUT EQUAL TO OR LESS THAN 70 KW.) |
| NF D35-345/A2-2002 | 气体点火的中央加热锅炉.标称热量输入不超过70KW的C型锅炉 | (Gas-fired central heating boilers - Type C boilers of nominal heat input not exceeding 70 kW.) |
| NF D36-103-2001 | 家政学.使用管道气体燃料的家用器具外部连接用(增强)橡胶软管 | (Household economy - (Reinforced) flexible rubber tubing for the external connection of domestic appliances using gaseous fuels by networks.) |
| NF D36-106-1-1997 | 和第1,第2及第3族气体以及热水接触的金属螺纹连接用密封材料.第1部分:厌氧密封材料 | (SEALING MATERIALS FOR METALLIC THREADED JOINTS IN CONTACT WITH 1ST, 2ND AND 3RD FAMILY GASES AND HOT WATER. PART 1 : ANAEROBIE JOINTING COMPOUNDS. (EUROPEAN STANDARD EN 751-1).) |
| NF D36-106-2-1997 | 和第1,第2及第3族气体以及热水接触的金属螺纹连接用密封材料.第2部分:非时效硬化的密封材料 | (SEALING MATERIALS FOR METALLIC THREADED JOINTS IN CONTACT WITH 1ST, 2ND AND 3RD FAMILY GASES AND HOT WATER. PART 2 : NON-HARDENING JOINTING COMPOUNDS. (EUROPEAN STANDARD EN 751-2).) |
| NF D36-106-3-1997 | 和第1,第2及第3族气体以及热水接触的金属螺纹连接用密封材料.第3部分:非烧结的PTFE带材 | (SEALING MATERIALS FOR METALLIC THREADED JOINTS IN CONTACT WITH 1 ST, 2ND AND 3RD FAMILY GASES AND HOT WATER. PART 3 : UNSINTERED PTFE TAPES. (EUROPEAN STANDARD EN 751-3).) |
| NF D36-306-2002 | 气体燃烧器和气体器具的自动关闭阀 | (Automatic shut-off valves for gas burners and gas appliances.) |
| NF D36-351-1969 | 家政学.使用气体燃料的灶具和洗衣机用的锥形转动阀门 | (TAPER TURNING COCKS FOR DOMESTIC COOKERS AND WASHING MACHINES USING GASEOUS FUELS.) |
| NF D36-361-1998 | 气体燃烧器和燃气设施用零点调节器 | (Zero governors for gas burners and gas burning appliances.) |
| NF D36-391-1-1998 | 气体燃炉和燃气装置的燃气/空气比率的控制.第1部分:风动型.(欧洲标准EN 12067-1) | (Gas/air ratio controls for gas burners and gas burning appliances. Part 1 : pneumatic types.) |
| NF D36-392-2001 | 气体燃烧器和燃气器具的安全和控制设备.一般要求 | (Safety and control devices for gas burners and gas-burning appliances - General requirements.) |
| NF E09-090-1-1997 | 可引起爆炸的气体.防爆.第1部分:基本原理和方法 | (EXPLOSIVE ATMOSPHERES. EXPLOSION PREVENTION AND PROTECTION. PART 1 : BASIC CONCEPTS AND METHODOLOGY. (EUROPEAN STANDARD EN 1127-1).) |
| NF E17-301-1999 | 气体表.双绘图气体表(EN 1359) | (GAS METERS. DIAPHRAGM GAS METERS. (EUROPEAN STANDARD EN 1359).) |
| NF E17-304-2002 | 燃气表.气体容量电子转换装置 | (Gas meters - Gas-volume electronic conversion devices.) |
| NF E29-139-1998 | 建筑物气体装置用手工操作球阀和死底锥形旋塞 | (Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings.) |
| NF E29-171/A1-2001 | 入口压力100巴以下的气体压力调节器 | (Gas pressure regulators for inlet pressures up to 100 bar.) |
| NF E29-175-2003 | 气体压力调节站和装置用安全设备.用于入口压力最高达100bar的气体安全关闭装置 | (Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 100 bar.) |
| NF E29-551-1939 | 钢制气体螺距的连接管.双接头 | (STEEL CONNECTIONS WITH GAS THREAD. DOUBLE NIPPLES.) |
| NF E29-552-1936 | 钢制气体螺距的连接管.套筒和连接螺帽 | (STEEL CONNECTIONS WITH GAS THREAD. SOCKET AND JOINT NUT.) |
| NF E29-553-1936 | 钢制气体螺距的连接管.T形管 | (STEEL CONNECTIONS WITH GAS THREAD. TEES.) |
| NF E29-554-1936 | 钢制气体螺距的连接管.全图 | (STEEL CONNECTIONS WITH GAS THREAD. OVERALL VIEW.) |
| NF E29-645-1-1999 | 可运输储气瓶.气体和气体混合物.第1部分:纯气体的特性 | (Transportable gas cylinders. Gases and gas mixtures. Part 1 : properties of pure gases.) |
| NF E29-645-2-1997 | 可运输的煤气瓶.气体和气体混合物.第2部分:气体和气体混合物的潜在易燃性和氧化能力的测定 | (Transportable gas cylinders. Gases and gas mixtures. Part 2 : determination of flammability and oxidizing ability of gases and gas mixtures.) |
| NF E29-648-2-2001 | 可移动式液化气钢瓶.内有气体的钢瓶和阀材料的配合性.第2部分:非金属材料 | (Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2 : non-metallic materials.) |
| NF E29-693-1-2001 | 气体钢瓶.压缩呼吸空气的气体钢瓶的出口连接.第1部分:轭型连接 | (Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 1 : Yoke type connections.) |
| NF E29-693-2-2001 | 气体钢瓶.压缩呼吸空气的气体钢瓶的出口连接.第2部分:螺纹连接 | (Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 2 : threaded connections.) |
| NF E29-693-3-2001 | 气体钢瓶.压缩呼吸空气的气体钢瓶的出口连接.第3部分:230巴阀门适配器 | (Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 3 : adaptor for 230 bar valves.) |
| NF E29-774-1998 | 可运输的储气瓶(LPG除外).气体改换过程 | (TRANSPORTABLE GAS CYLINDERS (EXCLUDING LPG). PROCEDURES FOR CHANGE OF GAS SERVICE. (EUROPEAN STANDARD EN 1795).) |
| NF E29-775-1999 | 可移动气体钢瓶.乙炔钢瓶.基本要求和定义(欧洲标准EN 1800) | (TRANSPORTABLE GAS CYLINDERS. ACETYLENE CYLINDERS. BASIC REQUIREMENTS AND DEFINITIONS. (EUROPEAN STANDARD EN 1800).) |
| NF E29-780-2002 | 可运输储气瓶.永久气体和液化气(乙炔除外)用蓄电池驱动车辆.灌装时的检验 | (Transportable gas cylinders - Battery vehicles for permanent and liquefied gases (excluding acetylene) - Inspection at time of filling.) |
| NF E29-792-2002 | 可移动储气瓶.恒定气体和液化气体(不包括乙炔)用钢瓶组.灌装时间的检查 | (Transportable gas cylinders - Cylinder bundles for permanent and liquefied gases (excluding acetylene) - Inspection at time of filling.) |
| NF E31-001-1969 | 固体，液体和气体燃料锅炉 | (BOILERS OPERATING WITH SOLID,LIQUID OR GASEOUS FUELS.) |
| NF E31-402-1/A2-2002 | 非家用单个气体燃烧器架空辐射管式加热器.第1部分:安全性 | (Single burner gas-fired overhead radiant-tube heaters for non-domestic use - Part 1 : safety.) |
| NF E31-404-1/A2-2002 | 非家用多个气体燃烧器架空辐射管式加热器系统.第1部分:系统D.安全性 | (Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 1 : system D, safety.) |
| NF E31-404-1/A3-2002 | 非家用的多个气体燃烧器架空辐射管式加热器系统.第1部分:系统D.安全性 | (Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 1 : system D, safety.) |
| NF E31-404-2/A2-2002 | 非家用多个气体燃烧器架空辐射管式加热器系统.第2部分:系统E.安全性 | (Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 2 : system E, safety.) |
| NF E31-404-2/A3-2002 | 非家用的多个气体燃烧器架空辐射管式加热器系统.第2部分:系统E.安全性 | (Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 2 : system E, safety.) |
| NF E31-404-3/A2-2002 | 非家用多个气体燃烧器架空辐射管式加热器系统.第3部分:系统F.安全性 | (Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 3 : system F, safety.) |
| NF E31-404-3/A3-2002 | 非家用的多个气体燃烧器架空辐射管式加热器系统.第3部分:系统F.安全性 | (Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 3 : system F, safety.) |
| NF E31-404-4/A2-2002 | 非家用多个气体燃烧器架空辐射管式加热器系统.第4部分:系统H.安全性 | (Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 4 : system H, safety.) |
| NF E31-404-4/A3-2002 | 非家用的多个气体燃烧器架空辐射管式加热器系统.第4部分:系统H.安全性 | (Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 4 : system H, safety.) |
| NF E32-020-5-1991 | 蒸汽发生器.蒸汽锅炉或过热蒸汽锅炉使用的安全.第5部分:工业气体燃烧设备的特殊规定 | (INSDUSTRIAL HEATING EQUIPMENTS. SAFETY OF STEAM OR SUPERHEATED STEAM GENERATORS,PERMANENTLY MANNED OR NOT. PART 5 : SPECIFIC REQUIREMENTS FOR NON-PULVERIZED COAL-FUELLED INSTALLATIONS.) |
| NF E32-115-7-2002 | 火管锅炉.第7部分:锅炉的液体和气体燃料的点火系统要求 | (Shell boilers - Part 7 : requirements for firing systems for liquid and gaseous fuels for the boilers.) |
| NF E32-200-3-1997 | 工业热处理设备.第3部分:环境气体的产生和使用安全要求(欧洲标准EN 746-3) | (INDUSTRIAL THERMOPROCESSING EQUIPMENT. PART 3 : SAFETY REQUIREMENTS FOR THE GENERATION AND USE OF ATMOSPHERE GASES. (EUROPEAN STANDARD EN 746-3).) |
| NF E37-102-1-2000 | 往复式内燃发动机.用在潜在爆炸气体环境下发动机结构和设计的安全要求.第1部分:用在可燃气体和蒸气环境的II | (Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1 : group II engines for use in flammable gas) |
| NF E37-102-2-2000 | 往复式内燃发动机.用在潜在爆炸气体环境下发动机结构和设计的安全要求.第2部分:用在地下工作时对沼气和/或 | (Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2 : group I engines for use in underground wo) |
| NF E37-102-3-2000 | 往复式内燃发动机.用在潜在爆炸气体环境下发动机结构和设计的安全要求.第3部分:用在可燃灰尘环境下的II组发 | (Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3 : group II engines for use in flammable dus) |
| NF E37-211-1-1997 | 往复式内燃机.废气排放测量.第1部分:气体和颗粒废气排放的试验床测定 | (Reciprocating internal combustion engines. Exhaust emission measurement. Part 1 : test-bed measurement of gaseous and particulate exhaust emissions.) |
| NF E37-211-2-1996 | 往复式内燃机.排气污染测定.第2部分:气体和颗粒物质排放污染的现场测量 | (Reciprocating internal combustion engines. Exhaust emission measurement. Part 2 : measurement of gaseous and particulate exhaust emissions at site.) |
| NF E37-501-9-2000 | 气体涡轮.征购.第9部分:可信性,可用性,可维修性和安全性 | (Gas turbines - Procurement - Part 9 : reliability, availability, maintainability and safety.) |
| NF E51-231-2002 | 石油和天然气工业.旋转型容积式压缩机.第2部分:封装气体压缩机(无油) | (Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 2 : packaged air compressors (oil-free).) |
| NF E51-233-2003 | 石油、化学和气体工业.离心压缩机 | (Petroleum, chemical and gas service industries - Centrifugal compressors.) |
| NF E51-234-2003 | 石油、化学和气体设备工业.包装的整体式齿轮分离空气压缩机 | (Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors.) |
| NF E51-235-2003 | 石油和天然气工业.包装的往复式气体压缩机 | (Petroleum and natural gas industries - Packaged reciprocating gas compressors.) |
| NF E51-718-1998 | 建筑物通风.气体终端设备.调节器和阀门的动力学试验 | (Ventilation for buildings. Air terminal devices. Aerodynamic testing of dampers and valves.) |
| NF E86-020-1974 | 气体压力设备.带标号的调整标记板 | (GAS PRESSURE VESSELS.NAME PLATE FOR STATUTORY IDENTIFICATION MARKINGS.) |
| NF E86-505-2001 | 低温容器.气体/材料可混用性 | (Cryogenic vessels - Gas/material compatibility.) |
| NF F19-352-1996 | 铁路车辆.内部气体容器涂料 | (RAILWAY ROLLING STOCK. INSIDE AIR TANK PAINT.) |
| NF F36-002-1974 | 铁路运输设备.工业货车.50MM气体导径管接头 | (RAILWAY TRANSPORT EQUIPMENT. INDUSTRIAL WAGONS. 50 MM AIR ADAPTOR COUPLING.) |
| NF F37-012-1989 | 液体或低压溶解气体运输用油罐车. 识别和装载牌 | (TANK WAGONS FOR THE CARRIAGE OF LIQUEFIED OR UNDER PRESSURE DISSOLVED GASES. IDENTITY AND LOADING PLATE.) |
| NF H31-411-2001 | 包装.薄金属包装.根据公称装填容量限定的有或无附加气体的饮料用顶开口圆形罐头 | (Packaging - Light-gauge metal packaging - Round open-top cans for beverage products with added gas, defined by their nominal filling volumes.) |
| NF H35-078-1977 | 制瓶工业.玻璃瓶.气体饮料用瓶.强度要求 | (BOTTLING INDUSTRY. GLASS BOTTLES. CONTAINERS FOR CARBONATED BEVERAGES. STRENGTH REQUIREMENTS.) |
| NF H96-334-2000 | 工业卡车的安全.潜在爆炸环境中的操作.用于可燃气体,蒸汽潮气和灰尘 | (Safety of Industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust.) |
| NF J95-022-1993 | 游艇.电气装置.对周围可燃气体引燃防护 | (Small craft. Electrical devices. Protection against ignition of surrounding flammable gases.) |
| NF J95-022/A1-2001 | 小艇.电气装置.周围可燃气体点火的防护 | (Small craft - Electrical devices - Protection against ignition of surrounding flammable gases.) |
| NF L54-002-038-1998 | 航空航天系列.电气及光学连接的元件.试验方法.第319部分:非焊包裹连接的气体致密度 | (Aerospace series. Elements of electrical and optical connection. Test methods. Part 319 : gastightness of solderless wrapped connections.) |
| NF M07-083-1995 | 液体燃料.在中级馏出物中甲醇乙醚芸苔子油的鉴定.液体和气体色谱法. | (LIQUID FUELS. IDENTIFICXATION OF COLZA METHYL ESTER INMIDDLE DISTILLATE. METHOD BY LIQUID AND GAS CHROMATOGRAPHY.) |
| NF M07-094-1998 | 液体石油产品.汽油中苯、甲苯和甲基叔丁基醚的测定.毛细管气体色谱法 | (LIQUID PETROLEUM PRODUCTS. DETERMINATION OF BENZENE, TOLUENE AND METHYLTERT-BUTYLETHER IN PETROL. METHOD BY CAPILLARY GAS CHROMATOGRAPHY.) |
| NF M08-018-1996 | 石油液体和气体.动态测量的正确可靠性.电脉冲数据和/或电子脉冲数据的电缆传输 | (Petroleum liquids and gases. Fidelity and security of dynamic measurement. Cabled transmission of electric and/or electronic pulsed data.) |
| NF M08-023-1999 | 石油液体和液化石油气体.测量.标准参比条件 | (PETROLEUM LIQUIDS AND LIQUEFIED PETROLEUM GASES. MEASUREMENT. STANDARD REFERENCE CONDITIONS.) |
| NF M50-015-2000 | 燃气供应系统.运输气体的管线的气体压力调节安装.功能要求 | (Gas supply systems - Gas pressure regulating installations on service lines - Functional requirements.) |
| NF M50-016-2000 | 燃气供应系统.运输和分配气体的气体压力调节站.功能要求 | (Gas supply systems - Gas pressure regulating stations for transmission and distribution - Functional requirements.) |
| NF M60-312-1999 | 核能.环境放射性气体的测量.利用喷雾技术抽取的大气氚T的活性浓缩的液体闪烁的测定 | (Nuclear energy. Measurement of environmental radioactivity-Air. Determination by liquid scintillation of the activity concentration of atmospheric tritium sampled by the sparging technique (air through water).) |
| NF M62-301-4-2001 | 密封罩用组件.第4部分:通风和气体清洁系统(如:过滤器和疏水阀)的安全和调节阀门以及控制和保护装置 | (Components for containment enclosures - Part 4 : ventilation and gas-cleaning systems such as filters, traps, safety and regulation valves, control and protection devices.) |
| NF P18-320-1999 | 混凝土、砂石和灰浆用添加剂.试验方法.第11部分:硬化混凝土中气体空隙特性的测定 | (Admixtures for concrete, mortar and grout. Test methods. Part 11 : determination of air void characteristics in hardened concrete.) |
| NF P50-767-2003 | 建筑物的隔热.建筑物中换气率的测定.示踪气体稀释法 | (Thermal insulation in buildings - Determination of air change in buildings - Tracer gas dilution method.) |
| NF P78-473-2003 | 建筑物用玻璃.隔热玻璃组件.第3部分:长期试验法以及漏气率和气体浓度公差的要求 | (Glass in building - Insulating glass units - Part 3 : long term test method and requirements for gas leakage rate and for gas concentration tolerances.) |
| NF R18-702-2-1992 | 道路车辆.3.5吨商业车辆上的自给式加热系统.第2部分:气体开动的丁烷/丙烷加热系统 | (ROAD VEHICLES. SELF SUSTAINED HEATING SYSTEMS INSTALLED ON COMMERCIAL VEHICLES OVER 3,5 T GVW(R). PART 2 : SPECIFIC SAFETY REQUIREMENTS FOR GAZ OPERATED BUTAN/PROPAN HEATING SYSTEMS.) |
| NF R21-502-1984 | 道路车辆.有点火装置摩托车排出污染气体的测量方法 | (Road vehicles. Measurement method of gaseous pollutants emitted by motorcycles equipped with a controlled ingition engine.) |
| NF S62-002-1991 | 防爆装置.第2部分:可燃气体在空气中的燃烧指数的测定.(欧洲标准 EN 26184~2) | (EXPLOSION PROTECTION SYSTEMS. PART 2 : DETERMINATION OF EXPLOSION INDICES OF COMBUSTIBLE GASES IN AIR. (EUROPEAN STANDARD EN 26184-2).) |
| NF S62-003-1991 | 防爆装置.第3部分:除空气/粉末混合物和空气/煤气混合物以外的可燃混合气体在空气中的燃烧指数的测定.(欧洲 | (EXPLOSION PROTECTION SYSTEMS. PART 3 : DETERMINATION OF EXPLOSION INDICES OF FUEL/AIR MIXTURES OTHER THAN DUST/AIR AND GAS/AIR MIXTURES. (EUROPEAN STANDARD EN 26184-3).) |
| NF S62-131-2003 | 固定式消防系统.气体灭火系统用部件.第1部分:电自动控制和延迟装置的要求和试验方法 | (Fixed firefighting systems - Components for gas extinguishing systems - Part 1 : requirements and test methods for electrical automatic control and delay devices.) |
| NF S62-132-2003 | 固定式消防系统.气体灭火系统用元件.第5部分:非电子自动控制和延迟装置的要求和试验方法 | (Fixed firefighting systems - Components for gas extinguishing systems - Part 2 : requirements and test methods for non-electrical automatic control and delay devices.) |
| NF S62-133-2003 | 固定的消防设备.气体灭火设备用元部件.第3部分:手动触发装置和止动装置的要求和试验方法 | (Fixed firefighting systems - Components for gas extinguishing systems - Part 3 : requirements and test methods for manual triggering and stop devices.) |
| NF S62-135-2001 | 固定式消防系统.气体灭火系统用元件.第5部分:CO2系统用的高、低压选择器阀门及其起动器的要求和试验方法 | (Fixed firefighting systems - Components for gas extinguishing systems - Part 5 : requirements and test methods for high and low pressure selector valves and their actuators for CO2 systems.) |
| NF S62-136-2001 | 固定式消防系统.气体灭火系统用元件.第6部分:CO2系统用的非电气失效装置的要求和试验方法 | (Fixed firefighting systems - Components for gas extinguishing systems - Part 6 : requirements and test methods for non-electrical disable devices for CO2 systems.) |
| NF S62-137-2001 | 固定式消防系统.气体灭火系统用元件.第7部分:CO2系统喷嘴的要求和试验方法 | (Fixed firefighting systems - Components for gas extinguishing systems - Part 7 : requirements and test methods for nozzles for CO2 systems.) |
| NF S62-138-1998 | 固定的消防装置.气体灭火装置用元件.第8部分:CO2装置用挠性连接器的要求和试验方法(欧洲标准EN 12094-8) | (Fixed firefighting system. Components for gas extinguishing systems. Part 8 : requirements and test methods for flexible connectors for CO2 systems.) |
| NF S62-139-2003 | 固定的消防设备.气体灭火设备用元部件.第9部分:专用火灾探测器的要求和试验方法 | (Fixed firefighting systems - Components for gas extinguishing systems - Part 9 : requirements and test methods for special fire detectors.) |
| NF S62-140-2003 | 固定消防系统.气体灭火系统元件.第10部分:压力计和压力开关的试验方法和要求 | (Fixed firefighting systems - Components for gas extinguishing systems - Part 10 : requirements and test methods for pressure gauges and pressure switches.) |
| NF S62-141-2003 | 固定的消防设备.气体灭火设备用元部件.第11部分:机械配重设备的要求和试验方法 | (Fixed firefighting systems - Components for gas extinguishing systems - Part 11: requirements and test methods for mechanical weighing devices.) |
| NF S62-142-2003 | 固定消防系统.气体灭火系统用元件.第12部分:气动报警装置的规范和试验方法 | (Fixed firefighting systems - Components for gas extinguishing systems - Part 12 : requirements and test methods for pneumatic alarm devices.) |
| NF S62-143-2001 | 固定的消防系统.气体灭火系统用元件.第13部分:止回阀的要求和试验方法 | (Fixed firefighting systems - Components for gas extinguishing systems - Part 13 : requirements and test methods for check valves and non-return valves.) |
| NF S62-146-2003 | 固定消防系统.气体灭火系统用元件.第16部分:CO2低压系统用添味设备的要求和试验方法 | (Fixed firefighting systems - Components for gas extinguishing systems - Part 16 : requirements and test methods for odorizing devices for CO2 low pressure systems.) |
| NF S66-202-2003 | 潜在爆炸性气体.防爆和防护.测定灰尘/空气混合物的最小点火能 | (Potentially explosive atmospheres - Explosion prevention and protection - Determination of minimum ignition energy of dust/air mixtures.) |
| NF S66-254-1-2003 | 气体和蒸气的最大爆炸压力和最大压升的测定.第1部分:最大爆炸压力的测定 | (Determination of the maximum explosion pressure and maximum rate of pressure rise of gases and vapours - Part 1 : determination of the maximum explosion pressure.) |
| NF S74-507-2001 | 防护服.化学试剂的防护.测定防护服面料耐液体和气体的渗透性 | (Protective clothing - Protection against chemicals - Determination of resistance of protective clothing materials to permeation by liquids and gases.) |
| NF S74-512-1994 | 防护服.防护气体和蒸气的试验方法.泄漏的测定(内压力试验) | (PROTECTIVE CLOTHING. PROTECTION AGAINST LIQUID AND GASEOUS CHEMICALS, INCLUDING AEROSOLS LIQUID AND SOLID PARTICLES. TEST METHOD : DETERMINATION OF LEAK-TIGHTNESS OF GAS-TIGHT SUITS (INTERNAL PRESSURE TEST). (EUROPEAN STANDARD EN 464).) |
| NF S74-527-1-2003 | 液体和气体化学物质(包括液体气溶胶和固体颗粒)的防护服装.第1部分:透气和不透气的“气密型“(1型)和“非气 | (Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles - Part 1 : performance requirements for ventilated and non-ventilated “gas-tight“ (Type 1) and “) |
| NF S74-527-2-2002 | 防护液体和气体化学物质(包括液体气溶胶和固体颗粒)的防护服装.第2部分:急救队用气密性(1型)化学防护套装的 | (Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles - Part 2 : performance requirements for “gas-tight“ (Type 1) chemical protective suits for emerg) |
| NF S76-016-2002 | 呼吸保护装置.防有毒气体和气体颗粒吸入的真空管过滤半罩式面具.要求,试验,标记 | (Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking.) |
| NF S76-017-1999 | 呼吸保护装置.无吸入阀和有防止气体或气体微粒或只有微粒的分隔滤膜的半口罩.(欧洲标准EN 1827) | (RESPIRATORY PROTECTIVE DEVICES. HALF MASKS WITHOUT INHALATION VALVES AND WITH SEPARABLE FILTERS TO PROTECT AGAINST GASES OR GASES AND PARTICLES OR PARTICLES ONLY. REQUIREMENTS, TESTING, MARKING. (EUROPEAN STANDARD EN 1827).) |
| NF S76-021-2000 | 呼吸保护装置.气体过滤器和组合过滤器.要求、试验、标记 | (Respiratory protective devices - Gas filters and combined filters - Requirements, testing, marking.) |
| NF S76-024-3-2003 | 呼吸保护器.气瓶阀.第3部分:潜水硝基气体和氧气气瓶的出口连接 | (Respiratory protective devices - Gas cylinder valves - Part 3 : outlet connections for diving gases Nitrox and oxygen.) |
| NF S76-025-1992 | 呼吸器官保护设备、过滤低沸点有机化合物的AX气体过滤器和复合过滤器.要求.试验.标记 | (RESPIRATORY PROTECTIVE DEVICES. AX GAS FILTERS AND COMBINED FILTERS AGAINST LOW BOILING ORGANIC COMPOUNDS. REQUIREMENTS,TESTING,MARKING. (EUROPEAN STANDARD EN 371).) |
| NF S76-026-1992 | 呼吸器官保护设备、过滤特定种名化合物的SX气体过滤器和复合过滤器.要求.试验.标记 | (RESPIRATORY PROTECTIVE DEVICES. SX GAS FILTERS AND COMBINED FILTERS AGAINST SPECIFIC NAMED COMPOUNDS. REQUIREMENS,TESTING,MARKING. (EUROPEAN STANDARD EN 372).) |
| NF S76-046-1997 | 自救式呼吸保护设备.有罩的独立式开路压缩气体呼吸仪.(有罩的压缩气体自救器).要求、检验和标志(欧洲标准EN | (RESPIRATORY PROTECTIVE DEVICES FOR SELF-RESCUE. SELF-CONTAINED OPEN-CIRCUIT COMPRESSED AIR BREATHING APPARATUS INCORPORATING A HOOD (COMPRESSED AIR ESCAPE APPARATUS WITH HOOD). REQUIREMENTS, TESTING, MARKING. (EUROPEAN STANDARD EN 1146).) |
| NF S76-061-2003 | 呼吸设备.使用压缩的硝基气体和氧气的开路自主式潜水仪.要求、试验、标记 | (Respiratory equipment - Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen - Requirements, testing, marking.) |
| NF S95-144-2000 | 病人呼吸混合气体用氧气监测仪.特殊要求 | (Oxygen monitors for patient breathing mixtures - Particular requirements.) |
| NF S95-148-1997 | 麻醉气体检测器 | (ANEASTHETIC GAS MONITORS. (EUROPEAN STANDARD EN ISO 11196).) |
| NF S95-154-1998 | 医用气体管道系统.第2部分:麻醉气体清除处理系统.基本要求 | (Medical gas pipeline systems - Part 2 : anaesthetic gas scavenging disposal systems - Basic requirements.) |
| NF S95-154/A1-2000 | 医用输气管道系统.第2部分:麻醉气体清除处置系统.基本要求 | (Medical gas pipeline systems - Part 2 : anaesthetic gas scavenging disposal systems - Basic requirements.) |
| NF S95-155-2000 | 医用气体管道系统.第3部分:压缩医用气体管道和真空管道 | (Medical gaz pipeline systems - Part 3 : pipelines for compressed medical gases and vacuum.) |
| NF S95-157-1-2001 | 麻醉和呼吸设备.人体增湿呼吸气体用热及水分交换器(HMEs).第1部分:250ml最小呼吸气容积的热及水分交换器 | (Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 1 : HMEs for use with minimum tidal volumes of 250 ml.) |
| NF S95-157-2-2003 | 麻醉和呼吸设备.使人体呼吸气体增湿的热和湿气交换器(HMEs).第2部分:潮气量最小为250ml的气管造口病人用热 | (Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 2 : HMEs for use with tracheostomized patients having minimum tidal volumes) |
| NF S95-159/A1-2002 | 医用气体压力调节器.第1部分:压力调节器和带流量计的压力调节器 | (Pressure regulators for use with medical gases - Part 1 : pressure regulators and pressure regulators with flow metering devices.) |
| NF S95-162-1998 | 医用气体管道系统.第1部分:医用压缩气体和真空装置的终端元件 | (Medical gas pipeline systems. Part 1 : terminal units for compressed medical gases and vacuum.) |
| NF S95-163-1998 | 医用气体管道系统.第4部分:麻醉气体清除系统的终端元件 | (Medical gas pipeline systems. Part 4 : terminal units for anaesthetic gas scavenging systems.) |
| NF S95-169-1999 | 与医用气体管道系统终端元件连接的流量测量设备 | (Flow-metering devices for connection to terminal units of medical gas pipeline systems.) |
| NF S95-171-1999 | 医用气体用压力调节器.多功能的和线状压力调节器(欧洲标准738-2) | (PRESSURE REGULATORS FOR USE WITH MEDICAL GASES. PART 2 : MANIFOLD AND LINE PRESSURE REGULATORS. (EUROPEAN STANDARD EN 738-2).) |
| NF S95-174-1998 | 医用气体用的低压软管组件 | (Low-pressure hose assemblies for use with medical gases.) |
| NF S95-174/A1-2002 | 医用气体用低压软管组件 | (Low-pressure hose assemblies for use with medical gases.) |
| NF S95-178-1998 | 医用气体用压力调节器.第3部分:与钢瓶阀门相结合的压力调节器(欧洲标准EN 738-3) | (PRESSURE REGULATORS FOR USE WITH MEDICAL GASES. PART 3 : PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES. (EUROPEAN STANDARD EN 738-3).) |
| NF S95-178/A1-2002 | 医用气体压力调节器.第3部分:带瓶阀的压力调节器 | (Pressure regulators for use with medical gases - Part 3 : pressure regulators integrated with cylinder valves.) |
| NF S95-179-1998 | 用于医用气体的压力调节器.第4部分:结合医用设备的低压调节器(欧洲标准EN 738-4) | (PRESSURE REGULATORS FOR USE WITH MEDICAL GASES. PART 4 : LOW-PRESSURE REGULATORS INTENDED FOR INCORPORATION INTO MEDICAL EQUIPMENT. (EUROPEAN STANDARD EN 738-4).) |
| NF S95-179/A1-2002 | 医用气体压力调节器.第4部分:装入医疗设备的低压调节器 | (Pressure regulators for use with medical gases - Part 4 : low-pressure regulators intended for incorporation into medical equipment.) |
| NF S95-184-2000 | 医用气体用高压柔性连接件. | (High-pressure flexible connections for use with medical gases.) |
| NF T20-037-1985 | 化工产品.挥气性液体和气体自燃温度的测定 | (Chemical products of industrial use. Determination of temperature of auto-inflammation of volatil liquids and gases.) |
| NF T20-040-1985 | 化工产品.固体和液体经过水解产生气体的着火点的测定 | (CHEMICAL PRODUCTS FOR INDUSTRIAL USE. DETERMINATION OF INFLAMMATION OF GASES FORMED AFTER HYDROLYSIS OF SOLIDS AND LIQUIDS.) |
| NF T20-041-1985 | 化工产品.气体着火点的测定 | (CHEMICAL PRODUCTS FOR INDUSTRIAL USE. DETERMINATION OF INFLAMMATION OF GASES.) |
| NF T20-381-1977 | 工业氢氧化钾.碳酸盐含量的测定.气体定量分析法 | (POTASSIUM HYDROXIDE FOR INDUSTRIAL USE. DETERMINATION OF CARBONATES CONTENT. GAS-VOLUMETRIC METHOD.) |
| NF T20-427-1976 | 工业氢氧化钠.碳酸盐的测定.气体定量法 | (SODIUM HYDROXYDE FOR INDUSTRIAL USE. DETERMINATION OF CARBONATES CONTENT. GAS VOLUMETRIC METHOD.) |
| NF T20-524-1973 | 工业硅酸钠硅酸钾.碳酸钠和碳酸钾中二氧化硅含量的测定.气体定量法 | (SODIUM AND POTASSIUM SILICATES FOR INDUSTRIAL USE. DETERMINATION OF CARBON DIOXIDE CONTENT EXPRESSED AS SODIUM OR POTASSIUM CARBONATE. GAS-VOLUMETRIC METHOD.) |
| NF T47-306-2003 | 弹性密封件.输送气体和碳氢液体的管道和配件用密封件的材料要求 | (Elastomeric seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids.) |
| NF T51-436-2002 | 塑料.酚醛树脂.用气体色谱法测定残余酚的含量 | (Plastics - Phenolic resins - Determination of residual phenol content by gas chromatography.) |
| NF T54-065-1-2003 | 气体燃料的塑料管道供应系统.聚乙烯(PE).第1部分:总则 | (Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1 : general.) |
| NF T54-065-2-2003 | 气体燃料的塑料管道供应系统.聚乙烯(PE).第2部分:管道 | (Plastics piping systems for the supply of gaseous fuels - Polythylene (PE) - Part 2 : pipes.) |
| NF T54-065-3-2003 | 气体燃料的塑料管道供应系统.聚乙烯(PE).第3部分:配件 | (Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3 : fittings.) |
| NF T54-065-4-2003 | 气体燃料的塑料管道供应系统.聚乙烯(PE).第4部分:阀门 | (Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4 : valves.) |
| NF T54-065-5-2003 | 气体燃料的塑料管道供应系统.聚乙烯(PE).第5部分:系统的配合 | (Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5 : fitness for purpose of the system.) |
| NF T60-254-1997 | 动植物油脂.固醇成份合成物测定.用高压液相色谱隔离固醇总量的气体色谱测定方法 | (ANIMAL AND VEGETABLE FATS AND OILS. DETERMINATION OF THE COMPOSITION OF THE STEROL FRACTION. METHOD BY GAS CHROMATOGRAPHY WITH ISOLATION OF TOTAL STEROLS BY HPLC.) |
| NF T60-502-1988 | 润滑剂、工业润滑油及其产品(L类).分类,第3B部分:D系列(气体和制冷压缩机用) | (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 3B : FAMILY D (GAS AND REFRIGERATION COMPRESSORS).) |
| NF T70-331-1995 | 军用高能材料.物理化学分析及特性.气体膨胀计测量抗拉试验过程中体积的变化 | (ENERGETIC MATERIALS FOR DEFENSE. PHYSICAL-CHEMICAL ANALYSIS AND PROPERTIES. VOLUME VARIATION MEASUREMENT IN A TENSILE TEST BY FARRIS GAS DILATOMETER.) |
| NF T90-324-1998 | 水质.消化污泥中有机化合物的“最大“厌氧生物降解性的评价.生物气体制品测量法 | (Water quality. Evaluation of the “ultimate“ anaerobic biodegradability of organic compounds in digested sludge. Method by measurement of the biogas production.) |
| NF X10-141-1982 | 密封管道中气体流量的测定.示踪法.第1部分：综合 | (Measurement of gas flow in conduits. Tracer methods. Part 1 general.) |
| NF X10-144-1982 | 密封管道中气体流量的测定.示踪法.第4部分：放射性示踪物的过渡时间法 | (MEASUREMENT OF GAS FLOW IN CONDUITS. TRACER METHODS. PART 4 : TRANSIT TIME METHOD USING RADIOACTIVE TRACERS.) |
| NF X11-620-1996 | 通过气体吸收用Branauer、Emmet和Teller(BET)方法测定固体的比表面积 | (Determination of the specific surface area of solids by gas adsorption using the bet method.) |
| NF X11-621-1975 | 用气体吸附法测定粉末的单位面积.BET法.用低温氮气吸附作用测定体积 | (DETERMINATION OF THE AREA PER UNIT MASS OF POWDERS (SPECIFIC SURFACE) BY MEANS OF GAS ADSORPTION. B.E.T. METHOD : VOLUMETRIC MEASUREMENT OF THE ADSORPTION OF NITROGEN AT LOW TEMPERATURES.) |
| NF X11-622-1977 | 用气体吸附法测定粉末单位质量的面积.基本方法的多种解释 | (DETERMINATION OF THE AREA PER UNIT MASS OF POWDERS (SPECIFIC SURFACE) BY MEANS OF GAS ADSORPTION. VARIOUS READINGS OF THE BASIC METHOD.) |
| NF X20-101-1984 | 气体分析.词汇 | (Gas analysis. Vocabulary.) |
| NF X20-201-1979 | 气体分析.校准用混合气体.混合气体制备证书 | (GAS ANALYSIS. CALIBRATION GAS MIXTURES. CERTIFICATE OF MIXTURE PREPARATION.) |
| NF X20-202-1979 | 气体分析.校准用混合气体的制备.重量法 | (GAS ANALYSIS. PREPARATION OF CALIBRATION GAS MIXTURES. GRAVIMETRIC METHODS.) |
| NF X20-203-1981 | 气体分析.校准用混合气体的制备.静态体积测定法 | (Gas analysis. Preparation of calibration gas mixtures. Static volumetric methods.) |
| NF X20-204-1974 | 气体分析.用配量活塞泵对气体混合物的动力制备进行校准的方法 | (GAS ANALYSIS. METHOD FOR THE DYNAMIC PREPARATION OF GAS MIXTURES FOR CALIBRATION BY PROPORTIONING PISTON PUMPS.) |
| NF X20-207-1982 | 气体分析.校准用混合气体成分的测定.比较法 | (Gas analysis. Determination of composition of calibration gas mixtures. Comparison methods.) |
| NF X20-209-1979 | 气体分析.校准用混合气体的制备.渗透法 | (GAS ANALYSIS. PREPARATION OF CALIBRATION GAS MIXTURES. PERMEATION METHOD.) |
| NF X20-211-1983 | 气体分析.校准用混合气体的制备.单位质量动力法 | (GAS ANALYSIS. PREPARATION OF CALIBRATION GAS MIXTURES. MASS DYNAMIC METHOD.) |
| NF X20-212-1986 | 气体分析.校正混合的制备.动态容量法.第1部分:计算法 | (GAS ANALYSIS. PREPARATION OF CALIBRATION GAS MIXTURES. DYNAMIC VOLUMETRIC METHODS. PART 1 : METHODS OF CALIBRATION.) |
| NF X20-214-1986 | 气体分析.校正混合的的制备.动态容量法.第3部分:定期注入流动气流 | (Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods. Part 3 : periodic injections into a flowing gas stream.) |
| NF X20-215-1986 | 气体分析.校正混合的的制备.动态容量法.第4部分:连续注入法 | (GAS ANALYSIS. PREPARATION OF CALIBRATION GAS MIXTURES. DYNAMIC VOLUMETRIC METHODS. PART 4 : CONTINUOUS INJECTION METHOD.) |
| NF X20-217-1986 | 气体分析.校正混合的的制备.动态容量法.第6部分:声学孔 | (Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods. Part 6 : sonic orifices.) |
| NF X20-220-1981 | 用比较法进行校准用混合气体的鉴定 | (ANALYSIS OF GASES. CHECKING OF CALIBRATION GAS MIXTURES BY A COMPARISON METHOD.) |
| NF X20-251-1982 | 气体分析.供应分析装置用的气体取样和输送设备 | (Analysis of gases. Devices for the sampling of gases and their transfer to an analytical unit.) |
| NF X20-302-1974 | 质谱仪进行气体分析.化学成分的测定 | (GAS ANALYSIS BY MASS SPECTROMETRY. DETERMINATION OF GAS CHEMICAL COMPOSITION.) |
| NF X20-303-1974 | 气相色层分离法进行气体分析 | (GAS ANALYSIS BY MEANS OF GAS CHROMATOGRAPHY.) |
| NF X20-305-1975 | 电导法进行气体分析 | (GAS ANALYSIS BY ELECTRICAL CONDUCTIMETRY.) |
| NF X20-307-1977 | 比色法进行气体分析 | (GAS ANALYSIS BY COLORIMETRY.) |
| NF X20-350-1979 | 气体分析.二氧化硫的分析.分析方法选择指南 | (GAS ANALYSIS. SULFUR DIOXIDE ANALYSIS. GUIDE FOR THE CHOICE OF THE ANALYSIS METHODS.) |
| NF X20-354-1975 | 气体分析.连续比色法测定二氧化硫 | (GAS ANALYSIS - DETERMINATION OF SULPHUR DIOXIDE BY CONTINUOUS COULOMETRIC METHOD.) |
| NF X20-355-1975 | 气体分析.电导法测定二氧化硫 | (GAS ANALYSIS-DETERMINATION OF SULFUR DIOXIDE BY ELECTRICAL CONDUCTIMETRY.) |
| NF X20-361-1976 | 气体分析.非扩散红外线辐射束吸收法测定一氧化碳 | (GAS ANALYSIS. DETERMINATION OF CARBON MONOXIDE BY ABSORPTION OF A NON DISPERSIVE INFRA-RED RADIATION BEAM.) |
| NF X20-363-1978 | 气体分析.气相色层分离法测定一氧化碳 | (GAS ANALYSIS. DETERMINATION OF CARBON MONOXIDE BY MEANS OF GAS CHROMATOGRAPHY.) |
| NF X20-378-1979 | 气体分析.氧含量分析.固体电解电化学法 | (GAS ANALYSIS. OXYGEN ANALYSIS. ELECTROCHEMICAL METHOD WITH SOLID ELECTROLYTE.) |
| NF X20-379-1979 | 气体分析.氧含量分析.液体或凝胶电解的电化学法 | (GAS ANALYSIS. OXYGEN ANALYSIS. ELECTROCHEMICAL METHODS WITH LIQUID OR GELLED ELECTROLYTE.) |
| NF X20-380-1979 | 气体分析.二氧化碳的分析.分析方法选择指南 | (GAS ANALYSIS. CARBON DIOXIDE ANALYSIS. GUIDE FOR THE CHOICE OF THE ANALYSIS METHODS.) |
| NF X20-510-3-2003 | 天然气.用气相色谱法测定规定了不确定度的组分.第3部分:用两填充柱测定氢、氦、惰性气体和碳最高至C8的烃类 | (Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 3 : determination of hydrogen, helium, inert gases and hydrocarbons up to C8 using two packed columns.) |
| NF X20-521-1981 | 气体分析.天然气露点的测定.表面冷却露点湿度计 | (Gas analysis. Determination of the water dew point of natural gas. Cooled surface condensation hygromete%rs.) |
| NF X20-702-2000 | 化学呼吸分析计.用呼出气体分析来估计乙醇浸润.规范和试验方法 | (Chemical breath analyser - Estimation of the alcohol impregnation by analysis of expelled air - Specifications and test methods.) |
| NF X20-703-2000 | 1级电子呼吸分析计.用呼出气体分析来估计乙醇浸润.规范和试验方法 | (Class 1 electronic breath analyser - Estimation of the alcohol impregnation by analysis of expelled air - Specifications and test methods.) |
| NF X20-704-2000 | 2级电子呼吸分析仪.通过对呼出的气体分析对乙醇的估计.规范和试验方法 | (Class 2 electronic breath analyser - Estimation of the alcohol impregnation by analysis of expelled air - Specifications and test methods.) |
| NF X43-010-1975 | 大气污染.酸性气体污染指数的测定 | (AIR POLLUTION. DETERMINATION OF A GAZEOUS ACID POLLUTION INDEX.) |
| NF X43-011-1975 | 大气污染.周围空气中含硫气体的测定取样设备和方法 | (AIR POLLUTION. DETERMINATION OF GASEOUS SULPHUR COMPOUNDS IN AMBIENT AIR SAMPLING EQUIPMENT AND METHOD.) |
| NF X43-016-1977 | 大气污染.酸性气体污染指数的测定方法（用当量ＳＯ2表示）.连续取样自动顺序分析方法 | (METHOD FOR THE DETERMINATION OF AN ACID GAS POLLUTION INDEX(EXPRESSED AS SO2 EQUIVALENT)USING A CONTINUOUS SAMPLING AUTOMATIC SEQUENTIAL ANALYSER.) |
| NF X43-060-1-2003 | 环境空气质量.测定气体和蒸气浓度的扩散取样机.要求和试验方法.第1部分:一般要求 | (Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 1 : general requirements.) |
| NF X43-060-2-2003 | 环境空气质量.测定气体和蒸气浓度的扩散取样机.要求和试验方法.第2部分:特殊要求和试验方法 | (Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 2 : specific requirements and test methods.) |
| NF X43-101-1986 | 空气质量.气体排出物气味的测定方法.承受限度的稀度系数的测定 | (Air quality. Method of measurement of the odour of gaseous effluent. Determination of the dilution factor at the threshold of perception.) |
| NF X43-104-1995 | 空气质量.有气味的气体.取样方法 | (Air quality. Odoring atmospheres. Sampling methods.) |
| NF X43-246-1-2000 | 工作场所空气.有毒气体和蒸汽的直接浓缩测量和直接测量的电气装置.第1部分:一般要求和试验方法 | (Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1 : general requirements and test methods.) |
| NF X43-246-2-2000 | 工作场所空气.有毒气体和蒸汽的直接浓缩测量和直接测量的电气装置.第2部分:用于测量限定值范围内的电气装置 | (Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 2 : performance requirements for apparatus used for me) |
| NF X43-246-3-2000 | 工作场所空气.有毒气体和蒸汽的直接浓缩测量和直接测量的电气装置.第3部分:用于测量限定值范围之上的电气装 | (Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 3 : performance requirements for apparatus used for me) |
| NF X43-246-4-2000 | 工作场所空气.有毒气体和蒸汽的直接浓缩测量和直接测量的电气装置.第4部分:选择,使用安装和维修指南 | (Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4 : guide for selection, installation, use and mainten) |
| NF X43-278-1996 | 工作场所的空气.测定气体和水蒸气用的扩散取样器.要求和试验方法 | (WORKPLACE ATMOSPHERES. DIFFUSIVE SAMPLERS FOR THE DETERMINATION OF GASES AND VAPOURS. REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 838).) |
| NF X43-279-1995 | 工作场所的气体.为与极限值比较和测量对策用评定化学试剂影响的导则 | (WORKPLACE ATMOSPHERES. GUIDANCE FOR THE ASSESSMENT OF EXPOSURE BY INHALATION TO CHEMICAL AGENTS FOR COMPARISON WITH LIMIT VALUES AND MEASUREMENT STRATEGY. (EUROPEAN STANDARD EN 689).) |
| NF X43-286-1997 | 工作环境的空气.气体和蒸汽测定用抽气式吸附管.要求和试验方法(欧洲标准EN 1076) | (WORKPLACE ATMOSPHERES. PUMPED SORBENT TUBES FOR THE DETERMINATION OF GASES AND VAPOURS. REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 1076).) |
| NF X43-320-1998 | 空气质量.稳定源辐射.HCI测定的手工方法.第1部分:气体取样 | (Air quality. Stationary source emissions. Manual method of determination of HCI. Part 1 : sampling of gases.) |
| NF X43-321-1998 | 空气质量.稳定源辐射.HCI测定的手工方法.第2部分:气体化合物吸收 | (Air quality. Stationary source emissions. Manual method of determination of HCI. Part 2 : gaseous compounds absorption.) |
| NF X43-328-1999 | 稳定源辐射.烟道气体低浓度时所有气化有机碳浓缩质量的测定.连续火焰离子检测器法 | (STATIONARY SOURCE EMISSIONS. DETERMINATION OF THE MASS CONCENTRATION OF TOTAL GASEOUS ORGANIC CARBON AT LOW CONCENTRATIONS IN FLUE GASES. CONTINUOUS FLAME IONISATION DETECTOR METHOD. (EUROPEAN STANDARD EN 12619).) |
| NF X43-640-2002 | 气体分析.词汇 | (Gas analysis - Vocabulary.) |
| NF X44-014-1-1998 | 高效气体过滤器(HEPA和ULPA).第1部分:分类、性能试验和作标记 | (High efficiency air filters (HEPA and ULPA). Part 1 : classification, performance testing, marking.) |
| NF X44-014-2-1998 | 高效气体过滤器(HEPA和ULPA).第2部分:烟雾质产品测量设备和粒子计数统计 | (High efficiency air filters (HEPA and ULPA). Part 2 : aerosol production, measuring equipment, particle counting statistics.) |
| NF X44-014-3-1998 | 高效气体过滤器(HEPA和ULPA).第3部分:平板过滤器介质试验 | (High efficiency air filters (HEPA and ULPA). Part 3 : testing flat sheet filter media.) |
| NF X50-001-5-2-1998 | 发电站设备的采购指南.第5-2部分:涡轮机.气体涡轮机 | (Guide for procurement of power station equipment. Part 5-2 : turbines. Gas turbines.) |
| NF X70-100-1-2001 | 燃烧试验.废气的分析.第1部分:热降解产生气体的分析方法 | (Fire tests - Analysis of gaseous effluents - Part 1 : methods for analysing gases stemming from thermal degradation.) |
| NF X70-101-1987 | 防火安全.燃烧试验.燃烧和裂解气体的分析.烟室法 | (Safety against fire. Fire behaviour tests. Analysis of gases resulting of combustion or pyrolysis. Test chamber method.) |
| XP D36-127-1999 | 用在家畜饲养棚的气体燃料装置的室外连接系统 | (Outdoor connection system for gaseous fuel appliances used in livestock breeding buildings.) |
| XP E29-140-1999 | 使用气体燃料的家用装置的控制阀.安全控制阀(带有集中自动密闭器的) | (Control cocks for household appliances using gaseous fuels - Safety cocks (with integrated automatic obturator).) |
| 编号 | 中文名称 | 英文名称 |