| 编号 | 中文名称 | 英文名称 |
|---|
| DIN 1055-10-2004
| 结构物的设计基础和作用.第10部分:起重机和机械引起的作用
| Basis of design and action on structures - Part 10: Actions induced by cranes and machinery
|
| DIN 15001-1-1973
| 起重机.第1部分:词汇、按型号的分类
| Cranes; Vocabulary, classification according to type
|
| DIN 15001-2-1975
| 起重机:第2部分:词汇.按用途分类
| Cranes; Vocabulary, classification according to application
|
| DIN 15002-1980
| 起重机.承载装置.词汇
| Lifting appliances; Load carrying devices; Vocabulary
|
| DIN 15018-1-1984
| 起重机.钢结构.验证和计算
| Cranes; steel structures; verification and analyses
|
| DIN 15018-2-1984
| 起重机.钢结构.设计与制造原则
| Cranes; steel structures; principles of design and construction
|
| DIN 15018-3-1984
| 起重机.有关钢结构的原理.车载起重机的计算
| Cranes; principles relating to steel structures; design of cranes on vehicles
|
| DIN 15019-1-1979
| 起重机.第1部分:除无轨安装移动式起重机和浮吊之外的所有起重机的稳定性
| Cranes; Stability for All Cranes Except Non-rail Mounted Mobile Cranes and Except Floating Cranes
|
| DIN 15019-2-1979
| 起重机.无轨安装移动式起重机的稳定性 第2部分:试验载荷与计算
| Cranes; Stability for Non Rail-mounted Mobile Cranes; Test Loading and Calculation
|
| DIN 15020-2-1974
| 起重机.第2部分:钢索传动原则.使用中监视
| Lifting Appliances; Principles Relating to Rope Drives; Supervision during Operation
|
| DIN 15022-1979
| 起重机.提升高度.作业速度
| Cranes; lifting hights, operating speeds
|
| DIN 15023-1979
| 起重机.悬臂起重机和带悬臂梁的龙门式起重机.工作半径
| Cranes; slewing cranes and portal cranes with cantilever, radii
|
| DIN 15024-1968
| 起重机和系列起重设备.双梁起重机的轨距（中心至中心）
| Cranes and serial lifting appliances, track gauges (center to center) for double girder crabs
|
| DIN 15025-1978
| 起重机.起重机驾驶室内操纵杆的操纵方向和配置
| Cranes; Direction of actuation and arrangement of controls in crane cabins
|
| DIN 15049-1958
| 带有电动葫芦或类似提升绞车的起重机.带滑动轴承的轨道轮
| Cranes with electric hoists or similar hoist gear; track wheels with plain bearings
|
| DIN 15050-1958
| 人工操作起重机.带滚动轴承的轨道轮
| Hand-driven cranes; track wheels with roller bearings
|
| DIN 15053-1976
| 起重机.减速齿轮、连接尺寸、外形规格、输出力矩
| Cranes; reduction gears, connecting dimensions, contour gauges, output torques
|
| DIN 15055-1982
| 炼钢厂、轧钢机和起重机.用油压的过盈配合.用途、尺寸、结构
| Steelworks, rolling mills and cranes; interference fits using oil under pressure; application, dimensions, design
|
| DIN 15057-1978
| 起重机.滚珠和滚柱轴承的盖.连接尺寸
| Cranes; covers for ball and roller bearings, connecting dimensions
|
| DIN 15061-1-1977
| 起重机.绳索槽轮的槽剖面
| Lifting appliances; groove profiles for wire rope sheaves
|
| DIN 15061-2-1977
| 起重机.钢丝绳卷筒上的槽形
| Cranes; groove profiles for wire rope drums
|
| DIN 15062-1-1982
| 起重机.绳轮.选择范围和直径与宽度的配合
| Cranes; rope pulleys; selected ranges and correlation of diameters and overall widths
|
| DIN 15062-2-1982
| 起重机.绳轮.轴承和轮毂尺寸
| Cranes; rope pulleys; dimensions of hubs and bearings
|
| DIN 15070-1977
| 提升设备.起重机轨道轮的计算
| Cranes; basic calculation of crane rail wheels
|
| DIN 15071-1977
| 提升设备.起重机轨道轮的承载的测定
| Cranes; determination of bearing load of crane rail wheels
|
| DIN 15072-1977
| 起重机.起重机轨道轮的触轨面轮廓和不同轨轮直径轨道的数据表
| Cranes; tread profile of crane rail wheels and table of rails for different wheel diameters
|
| DIN 15073-1977
| 起重机.导频轨道轮的一览表
| Cranes; table of crane rail wheels
|
| DIN 15074-1978
| 起重机..无齿轮带滑动轴承的起重机凸缘导轨轮
| Cranes; flanged crane rail wheels with plain bearings, without gear wheel
|
| DIN 15075-1977
| 起重机.带齿轮的装有关节轴承的有法兰的起重机轨道轮
| Cranes; flanged crane rail wheels, with plain bearings, with gear wheel
|
| DIN 15076-1977
| 起重机.不带齿轮的装有关节轴承的带轮胎的有法兰的起重机轨道轮
| Cranes; flanged crane rail wheels with tyre, with plain bearings, without gear wheel
|
| DIN 15077-1977
| 起重机.带滑动轴承和齿轮的带轮箍的起重机凸缘导轨轮.
| Cranes; flanged crane rail wheels with tyre, with plain bearings, with gear wheel
|
| DIN 15078-1977
| 起重机.不带齿轮的装有滚子轴承的有法兰的起重机轨道轮
| Cranes; flanged crane rail wheels, with roller bearings, without gear wheel
|
| DIN 15079-1977
| 起重机.带滚柱轴承和齿轮的起重机带凸缘导轨轮
| Cranes; flanged crane rail wheels, with roller bearings, with gear wheel
|
| DIN 15080-1977
| 起重机.带滚柱轴承、无齿轮、带轮箍的起重机凸缘导轨轮
| Cranes; flanged crane rail wheels with tyre, with roller bearings, without gear wheel
|
| DIN 15081-1977
| 起重机.带滚柱轴承、齿轮、带轮箍的起重机带凸缘导轨轮
| Cranes; flanged crane rail wheels with tyre, with roller bearings, with gear wheel
|
| DIN 15082-1-1977
| 起重机.轨道轮.螺旋连接的齿轮
| Cranes; crane rail wheels, screwed-on gear wheels
|
| DIN 15082-2-1977
| 起重机.与大齿轮压配合的带滚柱轴承的起重机轨道轮
| Cranes; crane rail wheels with roller bearings, pressed-on gear wheels
|
| DIN 15083-1977
| 起重机；起重机导轨轮、机加的轮箍
| Cranes; crane rail wheels, machined tyres
|
| DIN 15084-1977
| 起重机.带滚柱轴承起重机导轨轮.轴承盖
| Cranes; crane rail wheels with roller bearings, bearing covers
|
| DIN 15086-1977
| 起重机.装有轴套补偿滚子轴承的起重机轨道轮.
| Crane; crane rail wheels with roller bearings, flattening of axle bushes
|
| DIN 15090-1982
| 起重机.驱动轮装置及从动轮装置.组装
| Cranes; driving wheel units and idler wheel units; assembly
|
| DIN 15091-1982
| 起重机.主动轮组和从动轮组.走轮轴
| Cranes; driving wheel units and idler wheel units; travelling wheel shafts
|
| DIN 15092-1982
| 起重机.驱动轮装置及从动轮装置.密封盖
| Cranes; driving wheel units and idler wheel units; sealing covers
|
| DIN 15093-1982
| 起重机.主动轮组和从动轮组.走轮
| Cranes; driving wheel units and idler wheel units; travelling wheels
|
| DIN 15094-1982
| 起重机.主动轮组和从动轮组.轴承罩环
| Cranes; driving wheel units and idler wheel units; bearing cage rings
|
| DIN 15095-1982
| 起重机.驱动和转动轴.安全盘、套筒、连接管
| Cranes; driven and rotating axles; securing discs, bushes, nipples
|
| DIN 15400-1990
| 起重吊钩.材料、机械特性、承载能力和应力
| Lifting hooks; materials, mechanical properties, lifting capacity and stresses
|
| DIN 15401-2-1983
| 起重机用吊钩.单钩.带螺纹轴的成品件
| Lifting hooks for lifting appliances; Single hooks; Finished parts with threaded shank
|
| DIN 15402-1-1982
| 起重机用吊钩.（Ramshorn hooks）双钩.毛坯件
| Lifting hooks for lifting appliances; Ramshorn hooks; Unmaschined parts
|
| DIN 15402-2-1983
| 起重机用吊钩.（Ramshorn hooks）双钩.带螺纹轴的成品
| Lifting hooks for lifting appliances; Ramshorn hooks; Finished parts with threaded shank
|
| DIN 15403-1969
| 起重机的提升吊钩.圆螺纹
| Lifting Hooks for Hoists; Knuckle Threads
|
| DIN 15404-1-1989
| 起重机吊钩.锻制吊钩交货技术条件
| Lifting hooks; technical delivery conditions for forged hooks
|
| DIN 15404-2-1988
| 起重机吊钩.轧制吊钩交货技术条件
| Lifting hooks; technical delivery conditions for laminated hooks
|
| DIN 15405-1-1979
| 起重机用吊钩.第1部分:使用中锻制吊钩的检验
| Lifting hooks; inspection of forged hooks in service
|
| DIN 15405-2-1988
| 起重机吊钩.轧制吊钩使用中检查
| Lifting hooks; In-service inspection of laminated hooks
|
| DIN 15406-1969
| 起重吊钩.手工锻制吊钩的描绘，指令
| Lifting hooks; tracing of hand forged hooks, directives
|
| DIN 15407-1-1977
| 起重机用吊钩.第1部分:插口铁水包、组件用带测点的叠层吊钩.主要尺寸
| Lifting hooks; laminated hooks with a point for spigot ladles, assembly, principal dimensions
|
| DIN 15408-1982
| 起重机.双滑轮下滑车.组件
| Cranes; twin sheave bottom blocks; assembly
|
| DIN 15409-1982
| 起重机.四滑轮下滑车.组件
| Cranes; quadruple sheave bottom blocks; assembly
|
| DIN 15412-1-1983
| 起重机的底座.第1部分:横梁毛坯
| Bottom blocks for lifting appliances; cross pieces; unmachined parts
|
| DIN 15412-2-1983
| 起重机的底座.第2部分:横梁成品
| Bottom blocks for lifting appliances; cross pieces; finished parts
|
| DIN 15413-1983
| 起重机的下滑车.提升吊钩螺母
| Bottom blocks for lifting appliances; lifting hook nuts
|
| DIN 15417-1982
| 起重机.下滑车.带滑动轴承的D型绳索轮
| Cranes; bottom blocks; type D rope pulleys with plain bearings
|
| DIN 15418-1-1982
| 起重机.下滑车.无内套带深槽滚珠轴承的C型绳轮
| Cranes; bottom blocks; type C rope pulleys with deep groove ball bearing, without internal sleeve
|
| DIN 15418-2-1982
| 起重机的下滑车.无内轴套深滚道滚珠轴承的C型绳索滑轮的间隔套
| Cranes; bottom blocks; spacer sleeves for type C rope pulleys with deep groove ball bearing, without internal sleeve
|
| DIN 15418-3-1982
| 起重机的下滑车.无内轴套深滚道滚珠轴承的C型绳索滑轮的油封盖
| Cranes; bottom blocks; sealing covers for type C rope pulleys with deep groove ball bearing, without internal sleeve
|
| DIN 15421-1-1982
| 起重机的下滑车.带深滚道滚珠轴承和内轴套的B型绳索滑轮
| Cranes; bottom blocks; type B rope pulleys with deep groove ball bearing and internal sleeve
|
| DIN 15421-2-1982
| 起重机.下滑车.带深滚道滚珠轴承和内套筒的B型绳索轮的内轴套和隔离套
| Cranes; bottom blocks; internal sleeves and spacer sleeves for type B rope pulleys with deep groove ball bearing and internal sleeve
|
| DIN 15421-3-1982
| 起重机.下滑车.带深滚道滚珠轴承和内套筒的B型绳索轮的油封盖
| Cranes; bottom blocks; sealing covers for type B rope pulleys with deep groove ball bearing and internal sleeve
|
| DIN 15422-1-1982
| 起重机.下滑车.带圆柱形滚动轴承和内套筒的A型绳索轮
| Cranes; bottom blocks; type A rope pulleys with cylindrical rolling bearing and internal sleeve
|
| DIN 15422-2-1982
| 起重机.下滑车.带圆柱形滚动轴承和内套筒的A型绳索轮的内轴套和隔离套
| Cranes; bottom blocks; internal sleeves and spacer sleeves for type A rope pulleys with cylindrical rolling bearing and internal sleeve
|
| DIN 15422-3-1982
| 起重机.下滑车.带圆柱形滚动轴承和内套筒的A型绳索轮的油封盖
| Cranes; bottom blocks; sealing covers for type A rope pulleys with cylindrical rolling bearing and internal sleeve
|
| DIN 15450-1978
| 起重机.移动驱动用万向轴的评价
| Cranes; evaluating of cardan shafts for travelling drives
|
| DIN 15451-1-1978
| 起重机.万向节轴.第1部分:主要尺寸
| Cranes; cardan shafts, principle dimensions
|
| DIN 15451-2-1978
| 起重机.万向节轴.第2部分:法兰连接
| Cranes; cardan shafts, connection to coupling flange
|
| DIN 15452-1978
| 起重机.万向轴的连接法兰
| Cranes; coupling flanges for cardan shafts
|
| DIN 15453-1978
| 起重机.万向节轴、安装方向、维护、搬运和存放
| Cranes; cardan shafts, directives for installation, maintainance, handling and storage
|
| DIN 22400-1990
| 提升机的控制装置.采矿用起重机和绞车
| Control units of winding engines; hoists and winches for mining
|
| DIN 4132 Bb.1-1981
| 起重机走道.钢结构.计算、设计与制造原则.说明
| Craneways; Steel structures, Principles for calculation, design and construction, Explanations
|
| DIN 4132-1981
| 起重机走道.钢结构.计算、设计与制造原则
| Craneways; Steel structures; Principles for calculation, design and construction
|
| DIN 4212-1986
| 加筋混凝土和预应力混凝土起重机轨道.设计和施工
| Reinforced concrete and prestressed concrete craneways; design and construction
|
| DIN 45635-61-1990
| 机器噪音测量.气载噪声测量.包面法.起重机
| Measurement of airborne noise emitted by machines; enveloping surface method; cranes
|
| DIN 536-1-1991
| 起重机轨道.A型、尺寸、截面特点、带底脚缘的起重机轨道用钢的品种
| Craine rails; dimensions, sectional properties, steel grades for crane rails with foot flange, form A
|
| DIN 536-2-1974
| F 型(扁形)起重机轨道.第2部分:尺寸、静态值、钢品级
| Crane Rails, Type F (Flat); Dimensions, Static Values, Steel Grades
|
| DIN CEN/TS 13001-3-1 Berichtigung 1-2006
| 起重机.一般设计.第3-1部分:钢结构性能的极限状态和合格检验
| Cranes - General design - Part 3-1: Limit states and proof of competence of steel structures; German version CEN/TS 13001-3-1:2004, Corrigenda to DIN CEN/TS 13001-3-1:2005-03; German version CEN/TS 13001-3-1:2004/AC:2006
|
| DIN CEN/TS 13001-3-1-2005
| 起重机.一般设计.第3-1部分:钢结构性能的极限状态和检验
| Cranes - General design - Part 3-1: Limit states and proof of competence of steel structures; German version CEN/TS 13001-3-1:2004
|
| DIN CEN/TS 13001-3-2 Berichtigung 1-2006
| 起重机.一般设计.第3-2部分:滑轮组中钢索性能的极限状态和检验
| Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems; German version CEN/TS 13001-3-2:2004, Corrigenda to DIN CEN/TS 13001-3-2:2005-03; German version EN 13001-3-2:2004/AC:2006
|
| DIN CEN/TS 13001-3-2-2005
| 起重机.一般设计.第3-2部分:滑轮组中钢索性能的极限状态和检验
| Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems; German version CEN/TS 13001-3-2:2004
|
| DIN EN 12077-2-2000
| 起重机安全.健康和安全要求.第2部分:限制和指示装置
| Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devices; German version EN 12077-2:1998
|
| DIN EN 1255-1995
| 内河航运船只.旋臂起重机
| Inland navigation vessels - Swing derricks; German version EN 1255:1995
|
| DIN EN 12644-1-2001
| 起重机.使用和试验资料.第1部分:说明书
| Cranes - Information for use and testing - Part 1: Instructions; German version EN 12644-1:2001
|
| DIN EN 12644-2-2000
| 起重机.使用和试验信息.第2部分:标记
| Cranes - Informations for use and testing - Part 2: Marking; German version EN 12644-2:2000
|
| DIN EN 12999-2003
| 起重机.装载起重机
| Cranes - Loader cranes; German version EN 12999:2002
|
| DIN EN 12999/A1-2004
| 起重机.负载起重机
| Cranes - Loader cranes; German version EN 12999:2002/A1:2004
|
| DIN EN 12999/A2-2007
| 起重机.装载起重机
| Cranes - Loader cranes; German version EN 12999:2002/A2:2006
|
| DIN EN 13000-2004
| 起重机.移动式起重机
| Cranes - Mobile cranes; German version EN 13000:2004
|
| DIN EN 13001-1 Berichtigung 1-2006
| 起重机.一般设计.第1部分:一般原则和要求
| Cranes - General design - Part 1: General principles and requirements; German version EN 13001-1:2004, Corrigenda to DIN EN 13001-1:2005-04; German version EN 13001-1:2004/AC:2006
|
| DIN EN 13001-1-2005
| 起重机.一般设计.第1部分:总则和要求
| Cranes - General design - Part 1: General principles and requirements; German version EN 13001-1:2004
|
| DIN EN 13001-2-2007
| 起重机.一般设计.第2部分:负载作用
| Cranes - General design - Part 2: Load actions; German version EN 13001-2:2004+AC:2006+A1:2006
|
| DIN EN 13135-1-2004
| 起重机.安全.设计.设备要求.第1部分:电工设备
| Cranes - Safety - Design - Requirements for equipment - Part 1: Electrotechnical equipment; German version EN 13135-1:2003
|
| DIN EN 13135-2 Berichtigung 1-2006
| 起重机.设备.第2部分:非电气化学设备
| Cranes - Equipment - Part 2: Non-elektrotechnical equipment; German version EN 13135-2:2004, Corrigenda to DIN EN 13135-2:2005-02; German version EN 13135-2:2004/AC:2005
|
| DIN EN 13135-2-2005
| 起重机.设备.第2部分:非电工设备
| Cranes - Equipment - Part 2: Non-electrotechnical equipment; German version EN 13135-2:2004
|
| DIN EN 13155-2007
| 起重机.非固定式荷载提升附属装置
| Cranes - Non fixed load lifting attachments; German version EN 13155:2003+A1:2005
|
| DIN EN 13157-2004
| 起重机.安全.手动提升设备
| Cranes - Safety - Hand powered lifting equipment; German version EN 13157:2004
|
| DIN EN 13557-2007
| 起重机.控制器和控制站
| Cranes - Controls and control stations; German version EN 13557:2003+A1:2005
|
| DIN EN 13586 Berichtigung 1-2007
| 起重机.入口
| Cranes - Access; German version EN 13586:2004; Corrigenda to DIN EN 13586:2004-07; German version EN 13586:2004/AC:2007
|
| DIN EN 13586-2004
| 起重机.检修孔
| Cranes - Access; German version EN 13586:2004
|
| DIN EN 13852-1 Berichtigung 2-2007
| 起重机.海上起重机.第1部分:通用海上起重机.DIN EN 13852-1-2004技术勘误
| Cranes - Offshore cranes - Part 1: General-purpose offshore cranes; German version EN 13852-1:2004, Corrigendum to DIN EN 13852-1:2004-10; German version EN 13852-1:2004/AC:2007
|
| DIN EN 13852-1-2004
| 起重机.海上起重机.第1部分:通用海上起重机
| Cranes - Offshore cranes - Part 1: General-purpose offshore cranes; German version EN 13852-1:2004
|
| DIN EN 13852-2-2005
| 起重机.海上起重机.第2部分:浮动式起重机
| Cranes - Offshore cranes - Part 2: Floating cranes; German version EN 13852-2:2004
|
| DIN EN 14238-2004
| 起重机.手控加载操作设备
| Cranes - Manually controlled load manipulating devices; German version EN 14238:2004
|
| DIN EN 14439-2007
| 起重机.安全.塔式起重机
| Cranes - Safety - Tower cranes; English version of DIN EN 14439:2007-03
|
| DIN EN 14492-1-2007
| 起重机.电力驱动绞车和提升设备.第1部分:电力驱动绞车
| Cranes - Power driven winches and hoists - Part 1: Power driven winches; English version of DIN EN 14492-1:2007-02
|
| DIN EN 14492-2-2007
| 起重机.电动链式提升机.第2部分:电动吊车
| Cranes - Power driven winches and hoists - Part 2: Power driven hoists; English version of DIN EN 14492-2:2007-04
|
| DIN EN 14502-1-2006
| 起重机.载人用升降设备.第1部分:吊蓝
| Cranes - Equipment for lifting persons - Part 1: Suspended baskets (includes Corrigendum AC:2005) English version of DIN EN 14502-1:2006-05
|
| DIN EN 14502-2-2005
| 起重机.载人用提升设备.第2部分:升降控制台
| Cranes - Equipment for the lifting of persons - Part 2: Elevating control stations; German version EN 14502-2:2005
|
| DIN EN 1494-2001
| 可移动的起重机和相关提升设备
| Mobile or movable jacks and associated lifting equipment; German version EN 1494:2000
|
| DIN EN 14985-2007
| 起重机.回转式动臂起重机
| Cranes - Slewing jib cranes; German version EN 14985:2007
|
| DIN EN 1991-3-2007
| 欧洲法规1:结构作用.第3部分:起重机和机械感应作用
| Eurocode 1: Actions on structures - Part 3: Actions induced by cranes and machinery; English version of DIN EN 1991-3:2007-03
|
| DIN EN 1993-6-2007
| 欧洲法规3:钢结构的设计.第6部分:起重机支撑结构
| Eurocode 3: Design of steel structures - Part 6: Crane supporting structures; German version EN 1993-6:2007
|
| DIN EN 45510-6-8-2000
| 发电厂设备采购指南.第6-8部分:涡轮机辅助设备和起重机
| Guide for procurement of power station equipment - Part 6-8: Turbine auxiliaries; cranes; German version EN 45510-6-8:1999
|
| DIN EN 60204-32-1999
| 机械的安全性.机器的电气设备.第32部分:起重机械的要求
| Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines (IEC 60204-32:1998); German version EN 60204-32:1998
|
| DIN EN 818-1-1996
| 起重用短链锁.安全性.第1部分:一般验收条件
| Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance; German version EN 818-1:1996
|
| DIN EN 818-2-1996
| 起重用短环圆钢链条.安全性.第2部分:8级止档链中级公差圆钢链条
| Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings, grade 8; German version EN 818-2:1996
|
| DIN EN 818-3-1999
| 起重用短环节链.安全性.第3部分:链式吊索用的中级公差的圆钢链.质量等级4
| Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings; grade 4; German version EN 818-3:1999
|
| DIN EN 818-4-1996
| 起重用短环圆钢链条.安全性.第4部分:8级止档链
| Short link chain for lifting purposes - Safety - Part 4: Chain slings, grade 8; German version EN 818-4:1996
|
| DIN EN 818-5-1999
| 起重用短环节链.安全性.第5部分:链式吊琐索.质量等级4
| Short link chain for lifting purposes - Safety - Part 5: Chain slings; grade 4; German version EN 818-5:1999
|
| DIN EN 818-6-2000
| 起重用短环节链.安全性.第6部分:链式吊索.生产商提供的用于使用和维修的信息规范
| Short link chain for lifting purposes - Safety - Part 6: Chain slings; specification for information for use and maintenance to be provided by the manufacturer; German version EN 818-6:2000
|
| DIN EN ISO 13535-2002
| 石油工业和天然气工业.钻井和生产设备.起重机设备 (ISO 13535:2000); 德文版本 EN ISO 13535:2000 (德文和
| Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment (ISO 13535:2000); German version EN ISO 13535:2000 (German and English texts)
|
| DIN ISO 6045-1988
| 造船和海上结构.悬臂起重机鹅颈形起重杆的轴承.组件和部件
| Shipbuilding and marine structures; bearings for derrick goosenecks; assemblies and components; identical with ISO 6045, edition 1987
|
| DIN-Fachbericht 126-2002
| 国家应用文献(NAD).DIN V ENV 1993-6的应用准则.欧洲法规3:第6部分:起重机轨道
| ()
|
| 编号 | 中文名称 | 英文名称 |
|---|