| 编号 | 中文名称 | 英文名称 |
|---|
| EN 10169-1-1996
| 连续有机涂层(螺旋状涂层)的扁钢制品 第1部分：一般信息(定义、材料、公差、试验方法)
| Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods)
|
| EN 10169-3-2003
| 连续有机涂层（螺旋状涂层）扁钢制品 第3部分：用于建筑物内部的产品
| Continuously organic coated (coil coated) steel flat products - Part 3: Products for building interior applications
|
| EN 10245-1-2001
| 钢丝和钢丝制品 钢丝上的有机涂层 第1部分：一般原则
| Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules
|
| EN 10245-2-2001
| 钢丝和钢丝制品 钢丝上的有机涂层 第2部分：涂PVC线材
| Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire
|
| EN 10245-3-2001
| 钢丝和钢丝制品 钢丝上的有机涂层 第3部分：涂PE线材
| Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire
|
| EN 10245-4-2003
| 钢丝和钢丝制品 钢丝上的有机涂层 第4部分：涂聚脂线材
| Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire
|
| EN 10301-2003
| 岸上和海上管路钢管及配件 减小非腐蚀性气体输送摩擦力的内涂层
| Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas
|
| EN 1071-1-2003
| 先进技术陶瓷 陶瓷涂层用试验方法 第1部分：用接触探针表面光度仪测定涂层厚度
| Advanced technical ceramics - Methods of test for ceramic coatings - Part 1: Determination of coating thickness by contact probe profilometer
|
| EN 1071-2-2002
| 先进技术陶瓷 陶瓷涂层用试验方法 第2部分：用滴坑磨碎法测定涂层厚度
| Advanced technical ceramics - Methods of test for ceramic coatings - Part 2: Determination of coating thickness by the crater grinding method
|
| EN 1096-1-1998
| 建筑物玻璃 涂层玻璃 第1部分：定义和分类
| Glass in building - Coated glass - Part 1: Definitions and classification
|
| EN 1096-2-2001
| 建筑物玻璃 涂层玻璃 第2部分：A级、B级和S级涂层的要求和试验方法
| Glass in building - Coated glass - Part 2: Requirements and test methods for class A, B and S coatings
|
| EN 1096-3-2001
| 建筑物玻璃 涂层玻璃 第3部分：C级和D级涂层的要求和试验方法
| Glass in building - Coated glass - Part 3: Requirements and test methods for class C and D coatings
|
| EN 12068-1998
| 阴极保护 与阴极保护有关的埋于地下的或浸于水中的钢管防腐的外部有机涂层、带条和冷缩材料
| Cathodic protection - External organic coatings for the corrosion protection of buried or immersed steel pipelines used in conjunction with cathodic protection - Tapes and shrinkable materials
|
| EN 12508-2000
| 金属和合金的防腐 表面处理、金属和其它无机涂层 词汇
| Corrosion protection of metals and alloys - Surface treatment, metallic and other inorganic coatings - Vocabulary
|
| EN 13360-2002
| 橡胶或塑料涂层织物 术语
| Rubber- or plastics-coated fabrics - Terminology
|
| EN 13858-2003
| 金属防锈蚀 铁或铁质构件上的非电解锌粉涂层
| Corrosion protection of metals - Non-electrolytically applied zinc flake coatings on iron or steel components
|
| EN 13920-15-2003
| 铝和铝合金 废料 第15部分：消费品铝包装产生的去涂层铝废料
| Aluminium and aluminium alloys - Scrap - Part 15: Decoated aluminium scrap from post-consumer aluminium packagings
|
| EN 1396-1996
| 铝和铝合金 一般用途的盘绕涂层薄板和带材 规范
| Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
|
| EN 1403-1998
| 金属腐蚀防护 电镀涂层 规定一般要求的方法
| Corrosion protection of metals - Electrodeposited coatings - Method of specifying general requirements
|
| EN 14099-2001
| 航天产品质量保证 用压敏带测量涂层和面漆的抗剥落和抗撕裂强度
| Space product assurance - Measurement of the peel and pull-off strength of coatings and finishes using pressure-sensitive tapes
|
| EN 14266-2003
| 煤高温分解的衍生物 煤焦油和沥青基胶粘剂及相关产品：涂层焦油 特性和试验方法
| Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: Coating tar - Characteristics and test methods
|
| EN 1875-3-1997
| 橡胶塑料涂层织物 撕裂强度测定 第3部分：梯形法
| Rubber- or plastics-coated fabrics - Determination of tear strength - Part 3: Trapezoidal method
|
| EN 1876-1-1997
| 橡胶或塑料涂层织物 低温试验 第1部分：弯曲试验
| Rubber or plastics-coated fabrics - Low-temperature tests - Part 1: Bending test
|
| EN 1876-2-1997
| 橡胶或塑料涂层织物 低温试验 第2部分：循环撞击试验
| Rubber- or plastics-coated fabrics - Low temperature tests - Part 2: Impact test on loop
|
| EN 2437-2001
| 航空航天系列 铝和铝合金用铬酸盐转化涂层(黄色)
| Aerospace series - Chromate conversion coatings (yellow) for aluminium and aluminium alloys
|
| EN 2491-1997
| 航空航天系列 二硫化钼基上的干膜润滑油 涂层法
| Aerospace series - Molybdenum disulphide dry lubricants - Coating methods
|
| EN 2591-508-2001
| 航空航天系列 光电连接元件 试验方法 第508部分： 触点涂层厚度的测量／注与EN 2591－100结合使用
| Aerospace series - Elements of electrical and optical connection; Test methods - Part 508: Measurement of thickness of coating on contacts / Note: Applies in conjunction with EN 2591-100
|
| EN 2591-509-2001
| 航空航天系列 光电连接元件 试验方法 第509部分： 触点涂层的附着力／注 与EN 2591－100结合使用
| Aerospace series - Elements of electrical and optical connection; Test methods - Part 509: Adhesion of coating on contacts / Note: Applies in conjunction with EN 2591-100
|
| EN 28094-1994
| 钢丝绳芯输送机带 绳芯与涂层间粘合强度试验
| Steel cord conveyor belts; adhesion strength test of the cover to the core layer (ISO 8094:1984)
|
| EN 2828-1993
| 航空航天系列 用抛光法作金属涂层的粘附性试验
| Aerospace series - Adhesion test for metallic coatings by burnishing
|
| EN 2829-1994
| 航空航天系列 用喷丸加工法作金属涂层的粘附性试验
| Aerospace series - Adhesion test for metallic coatings by shot peening
|
| EN 2997-10-1997
| 航空航天系列 连续运行温度为175℃、200℃、最高温度为260℃时、耐火或不耐火的用有螺纹环连接的电连接器
| Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175℃ continuous, 200℃ continuous, 260℃ peak - Part 10: Protective cover for plug - Product standard
|
| EN 2997-9-1997
| 航空航天系列 连续运行温度为175℃、200℃、最高温度为260℃时、耐火或不耐火的用有螺纹环连接的电连接器
| Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175℃ continuous, 200℃ continuous, 260℃ peak - Part 9: Protective cover for receptacle - Product standard
|
| EN 330-1993
| 木材防腐剂 测定涂层下和地面露出接触用木材防腐剂的相对防护效果的现场试验方法：L连接法
| Wood preservatives; field test method for determining the relative protective effectiveness of a wood preservative for use under a coating and exposed out of ground contact: L-joint method
|
| EN 4322-2003
| 航空航天系列 TI-P640001阳极氧化 MoS<(Index)2>涂层制钛合金、带安全锁线孔的细柄长螺纹双六角头螺栓
| Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in titanium alloy TI-P64001, anodized, MoS<(Index)2> coated - Strength class: 100 MPa (at ambient temperature) / Note: To be replaced by prEN 4322 (2003-05).
|
| EN 4323-2003
| 航空航天系列 TI-P640001阳极氧化 MoS<(Index)2>涂层制钛合金 １００°埋头六角形凹槽全螺纹螺钉 等级
| Aerospace series - Screws, 100?countersunk head, six lobe recess, threaded to head, in titanium alloy TI-P64001, anodized, MoS<(Index)2> coated - Classification: 900 MPa (at ambient temperature)/350℃ / Note: To be replaced by prEN 4323 (2003-05).
|
| EN 4352-2003
| 航空航天系列 MoS<(Index)2> 涂层制耐热镍基合金 NI-PH2601 (Inconel 718)、带安全锁线孔的细柄长螺纹双六
| Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS<(Index)2> coated - Classification: 1550 MPa (at ambient temperature)/425℃ / Note: To be rep
|
| EN 582-1993
| 热喷涂层 抗拉粘附强度的测定
| Thermal spraying; determination of tensile adhesive strength
|
| EN 60684-3-300-2002
| 绝缘软套管 第3部分：各种型号套管规范 活页300：无涂层的玻璃纤维编织套管
| Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 300: Glass textile fibre sleeving, braided, uncoated (IEC 60684-3-300:2002) / Note: Endorsement notice
|
| EN 60684-3-343 bis 345-2002
| 绝缘软套管 第3部分：个别型号套管规范 活页343至345：无涂层膨胀辫形乙烯氯三氟乙烯(E-CTFE)纺织套管
| Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated (IEC 60684-3-343 to 345:2002) / Note: Endorsement notice
|
| EN 60684-3-400 bis 402-2002
| 绝缘软套管 第3部分：各种型号套管规范 活页400至402：有硅橡胶涂层的玻璃纤维纺织套管
| Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 400 to 402: Glass textile sleeving with silicone elastomer coating (IEC 60684-3-400 to 402:2002) / Note: Endorsement notice
|
| EN 60684-3-406 bis 408-2003
| 绝缘软套管 第3部分：各种型号套管规范 活页406-408：有PVC涂层的玻璃纤维纺`织套管
| Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 406 to 408: Glass textile sleeving with PVC coating (IEC 60684-3-406 to 408:2003) / Note: Endorsement notice
|
| EN 60684-3-420 bis 422-2002
| 绝缘软套管 第3部分：个别型号套管规范 活页420至422：丙烯酸涂层的聚对笨二甲酸乙二醇脂编织套管
| Flexible insulating sleeving - Part 3: Specification for individual types of sleeving; Sheets 420 to 422: Polyethylene terephthalate textile sleeving with acrylic based coating (IEC 60684-3-420 to 422:2002) / Note: Endorsement notice
|
| EN 61086-1-1994
| 承载印制电路板用涂料(保护涂层)规范 第1部分：定义、分类和一般要求
| Specification for coatings for loaded printed wire boards (conformal coatings) - Part 1: Definitions, classification and general requirements (IEC 61086-1:1992)
|
| EN 61086-2-1994
| 承载印制电路板用涂料(保护涂层)规范 第2部分：试验方法
| Specification for coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test (IEC 61086-2:1992)
|
| EN 61086-3-1-1995
| 承载印制电路板用涂料(保护涂层) 第3部分：单项材料规范 活页1: 通用(I类)和高可靠性(II类)涂料
| Coatings for loaded printed wire boards (conformal coatings) - Part 3: Specifications for individual materials - Sheet 1: Coatings for general purpose (class I) and for high reliability (class II) (IEC 61086-3-1:1995)
|
| EN 61249-5-1-1996
| 互连结构用材料 第5部分：有和无涂层的导电箔和薄膜分规范集 第1节：铜箔(用于生产覆铜基材)
| Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with and without coatings - Section 1: Copper foils (for the manufacturer of copper-clad base materials) (IEC 61249-5-1:1995)
|
| EN 61249-5-4-1996
| 互连结构用材料 第5部分：有或无涂层的导电箔和薄膜分规范集 第4节：导电油墨
| Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with or without coatings - Section 4: Conductive inks (IEC 61249-5-4:1996)
|
| EN 61249-8-7-1996
| 互连结构用材料 第8部分：非导电薄膜和涂层分规范集 第7节：打印油墨
| Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings - Section 7: Marking legend inks (IEC 61249-8-7:1996)
|
| EN 61249-8-8-1997
| 互连结构用材料 第8部分：非导电薄膜和涂层分规范集 第8节：非永久高聚物涂层
| Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings - Section 8: Temporary polymer coatings (IEC 61249-8-8:1997)
|
| EN 757-1997
| 焊接消耗品 高强度钢手工金属弧焊用涂层焊条 分类
| Welding consumables - Covered electrodes for manual metal arc welding of high strength steels - Classification
|
| EN 846-13-2001
| 砖石结构辅助部件试验方法 第13部分：有机涂层抗冲击、磨损和侵蚀性的测定
| Methods of test for ancillary components of masonry - Part 13: Determination of resistance to impact, abrasion and corrosion of organic coatings
|
| EN 868-10-2000
| 经消毒的医疗器械用包装材料和系统 第10部分：生产热密封袋、卷轴和盖的聚烯烃粘性涂层非编织材料 要求和
| Packaging materials and systems for medical devices which are to be sterilized - Part 10: Adhesive coated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels and lids - Requirements and test methods
|
| EN 868-9-2000
| 经消毒的医疗器械用包装材料和系统 第9部分：生产热密封袋、卷轴和盖的聚烯烃非涂层非编织材料 要求和试
| Packaging materials and systems for medical devices which are to be sterilized - Part 9: Uncoated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels and lids - Requirements and test methods
|
| EN 971-1-1996
| 色漆和清漆 涂层材料的术语和定义 第1部分：一般术语
| Paints and varnishes - Terms and definitions for coating materials - Part 1: General terms
|
| EN ISO 105-X10-1995
| 纺织品 色牢度试验 第X10部分：纺织品颜色向聚氯乙烯涂层迁移的评定
| Textiles - Tests for colour fastness - Part X10: Assessment of migration of textile colours into polyvinyl chloride coatings (ISO 105-X10:1993)
|
| EN ISO 11507-2001
| 色漆和清漆 涂层在设备中人工老化 UV荧光和水的老化
| Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV and water (ISO 11507:1997)
|
| EN ISO 11644-2003
| 皮革 涂层粘牢度试验
| Leather - Test for adhesion of finish (ISO 11644:1993)
|
| EN ISO 11998-2001
| 色漆和清漆 涂层的耐湿式洗涤和清洗性测定
| Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings (ISO 11998:1998)
|
| EN ISO 15720-2001
| 金属涂层 孔隙率试验 胶材料电版术法测定金属衬底上金和钯涂层空隙度
| Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography (ISO 15720:2001)
|
| EN ISO 15721-2001
| 金属涂层 孔隙率试验 用亚硫酸和二氧化硫蒸气测定金和钯涂层孔隙率
| Metallic coatings - Porosity tests - Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour (ISO 15721:2001)
|
| EN ISO 17186-2002
| 皮革 物理性能及机械性能试验 表面涂层厚度测定
| Leather - Physical and mechanical tests - Determination of surface coating thickness (ISO 17186:2002)
|
| EN ISO 17233-2002
| 皮革 物理性能及机械性能试验 表面涂层冷裂温度的测定
| Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings (ISO 17233:2002)
|
| EN ISO 2360-1995
| 非磁性基金属上非导电涂层 镀层厚度的测量 涡流法
| Non-conductive coatings on non-magnetic basis metals - Measurement of coating thickness - Eddy current method (ISO 2360:1982)
|
| EN ISO 2411-2000
| 橡胶或塑料涂覆织物 涂层粘合强度的测定
| Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2000)
|
| EN ISO 4628-1-2003
| 色漆和清漆 涂层降解性的评定 表面缺陷数量和大小，和均匀变化强度的测定 第1部分：一般介绍和命名系统
| Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system (ISO 4628-1:2003)
|
| EN ISO 4628-10-2003
| 色漆和清漆 涂层降解性的评定 表面缺陷数量和大小，和均匀变化强度的测定 第10部分：线状腐蚀度的评定
| Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree filiform corrosion (ISO 4628-10:2003)
|
| EN ISO 4628-2-2003
| 色漆和清漆 涂层降解性的评定 表面缺陷数量和大小，和均匀变化强度的测定 第2部分：起泡度的评定
| Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2003)
|
| EN ISO 4628-3-2003
| 色漆和清漆 涂层降解性的评定 表面缺陷数量和大小，和均匀变化强度的测定 第3部分：防生锈度的评定
| Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2003)
|
| EN ISO 4628-4-2003
| 色漆和清漆 涂层降解性的评定 表面缺陷数量和大小，和均匀变化强度的测定 第4部分：破裂度的评定
| Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2003)
|
| EN ISO 4628-5-2003
| 色漆和清漆 涂层降解性的评定 表面缺陷数量和大小，和均匀变化强度的测定 第5部分：剥落度的评定
| Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2003)
|
| EN ISO 4628-7-2003
| 色漆和清漆 涂层降解性的评定 表面缺陷数量和大小，和均匀变化强度的测定 第7部分：用绒化法做粉化程
| Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 7: Assessment of degree of chalking by velvet method (ISO 4628-7:2003)
|
| EN ISO 7590-2001
| 钢丝绳芯输送带 总厚度和涂层厚度的测定方法
| Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness (ISO 7590:2001)
|
| EN ISO 7623-1997
| 钢丝绳芯输送带 绳芯与涂层之间粘合力试验 原始试验和热处理
| Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment (ISO 7623:1996)
|
| EN ISO 8501-1-2001
| 涂装油漆和有关产品前钢材预处理 表面清洁度的目视评定 第1部分：未涂装的钢材和全面清除原有涂层后钢材
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previo
|
| EN ISO 8501-2-2001
| 涂装油漆和有关产品前钢材预处理 表面清洁度的目视评定 第2部分：局部清除原有涂层后钢材的锈蚀等级
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings (ISO 8501-2:1994) |
| EN ISO 8980-4-2000
| 眼科光学 未切边成品眼镜片 第4部分：防反射涂层的试验方法和规范
| Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for anti-reflection coatings (ISO 8980-4:2000)
|
| ENV 10169-2-1999
| 连续有机涂层（螺旋状涂层）扁钢制品 第2部分：用于建筑物外部的产品
| Continuously organic coated (coil coated) steel flat products - Part 2: Products for building exterior applications
|
| ENV 1071-3-1994
| 先进技术陶瓷 陶瓷涂层用试验方法 第3部分：用刮痕试验测定胶合力
| Advanced technical ceramics - Methods of test for ceramic coatings - Part 3: Determination of adhesion by a scratch test
|
| ENV 1071-4-1995
| 先进技术陶瓷 陶瓷涂层试验方法 第4部分：化学成分的测定
| Advanced technical ceramics - Methods of test for ceramic coatings - Part 4: Determination of chemical composition
|
| ENV 1071-5-1995
| 先进技术陶瓷 陶瓷涂层用试验方法 第5部分：多孔性的测定
| Advanced technical ceramics - Methods of test for ceramic coatings - Part 5: Determination of porosity
|
| ENV 1071-6-2002
| 先进技术陶瓷 陶瓷涂层用试验方法 第6部分：微小磨损试验测定涂层抗磨损性
| Advanced technical ceramics - Methods of test for ceramic coatings - Part 6: Determination of the abrasion resistance of coatings by a micro-abrasion wear test
|
| prEN 10300-2002
| 岸上和海上管路钢管及配件 外表涂层用沥青加热材料
| Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating
|
| prEN 10309-1999
| 岸上和海上管路钢管及配件 外表环氧树脂粉末涂层
| Steel tubes and fittings for onshore and offshore pipelines - External epoxy powder coating
|
| prEN 10310-2002
| 岸上和海上管路钢管及配件 双层环氧树脂和聚酰胺基涂层的内衬和外衬
| Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings
|
| prEN 10329-2002
| 岸上和海上管路钢管及配件 外表安装接头涂层
| Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings
|
| prEN 1071-3-2000
| 先进技术陶瓷 陶瓷涂层用试验方法 第3部分：用刮痕试验测定胶合力和其它机械故障
| Advanced technical ceramics - Methods of test for ceramic coatings - Part 3: Determination of adhesion and other mechanical failure modes by a scratch test
|
| prEN 1096-4-2001
| 建筑物玻璃 涂层玻璃 第4部分：一致性评定
| Glass in building - Coated glass - Part 4: Evaluation of conformity
|
| prEN 12206-1-2001
| 色漆和清漆 建筑用途的铝和铝合金涂层 第1部分：由粉末涂料的配制涂层
| Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from powder coating materials
|
| prEN 12757-1-1997
| 涂层材料的搅拌机械 安全要求 第1部分：整修车辆表面用涂料的搅拌机械
| Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
|
| prEN 13333-1998
| 皮革 物理和机械试验 表面涂层冷裂温度的测定
| Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings
|
| prEN 13438-2002
| 建筑用电镀钢产品的粉状有机涂层
| Powder organic coatings for galvanized steel products for construction purposes
|
| prEN 13938-6-2001
| 民用爆破器材 推进剂和火箭推进剂 第6部分：火箭用固体燃料推进剂 抑制剂涂层完整性的测定指南
| Explosives for civil uses - Propellants and rocket propellants - Part 6: Solid rocket propellants; Guide for the determination of integrity of inhibitor coatings
|
| prEN 1958-1995
| 用于珠宝和有关产品的贵重金属及其合金的装饰涂层
| Precious metal and precious metal alloy decorative coatings used in jewellery and associated products
|
| prEN 31950-1993
| 冷轧镀铬//氧化铬涂层钢板
| Cold-reducted electrolytic chromium/chromium oxide coated steel (ISO/DIS 11950)
|
| prEN 4071-1999
| 航空航天系列 铝 IVD涂层钛合金标准六角头紧公差普通柄短螺纹螺栓 等级：1100 MPa(环境温度) /425℃
| Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature)/425℃
|
| prEN 4072-1999
| 航空航天系列 铝 IVD涂层钛合金、100°埋头标准头偏十字凹槽紧公差普通柄短螺纹螺钉 等级：1100 MPa(环境
| Aerospace series - Screws, 100?countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature)/425℃
|
| prEN 4127-1999
| 航空航天系列 钛合金铝 IVD涂层、标准六角头松公差普通柄短螺纹螺栓 等级：1100 MPa (环境温度)/425 ℃
| Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in titanium alloy, aluminium IVDcoated - Classification: 1100 MPa (at ambient temperature)/425℃
|
| prEN 4128-1999
| 航空航天系列 耐热镍基合金铝 IVD涂层、标准六角边头松公差普通柄短螺纹螺栓 等级：1250 MPa (环境温度)/
| Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in heat resisting nickel base alloy, aluminium IVD coated - Classification: 1250 MPa (at ambient temperature)/425℃
|
| prEN 4176-1999
| 航空航天系列 阳极氧化或有铝色涂层钛合金TI-P64001、100°埋头标准头或突出头的张力剪式紧公差锁紧螺栓、
| Aerospace series - Lockbolts, 100?countersunk normal head or protruding head, tension-sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating - Collars in titanium TI-P99002 or aluminium alloy 2024 - Metric
|
| prEN 4312-1999
| 航空航天系列 带铝色涂层制 耐热和耐腐蚀钢、松公差异径柄中等长度螺纹的双头螺栓 等级：1100 MPa (常温
| Aerospace series - Studs, coarse tolerance reduced shank, medium length threads, in heat and corrosion resisting steel, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃
|
| prEN 4363-1999
| 航空航天系列 带铝色涂层钛合金 Ti 44,5 Cb、制１００°埋头短头实心铆钉 米制
| Aerospace series - Rivets, solid, 100?countersunk reduced head, in titanium alloy Ti 44,5 Cb, with aluminium pigmented coating, metric series
|
| prEN 4401-1999
| 航空航天系列 米制有铝色涂层钛合金TI-P64001紧公差剪式突头锁紧螺栓 等级：1100 MPa (常温)/315℃
| Aerospace series - Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature)/315℃
|
| prEN 4402-1999
| 航空航天系列 米制有铝色涂层钛合金TI-P64001紧公差剪式100度埋头标准头锁紧螺栓 等级：1100 MPa (常温)/
| Aerospace series - Lockbolts, 100?countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature)/315℃
|
| prEN 4403-1999
| 航空航天系列 有铝色涂层钛合金Ti44, 5 Cb100度埋头标准头实心铆钉 米制
| Aerospace series - Rivets, solid, 100?countersunk normal head, in titanium alloy Ti 44,5 Cb, with aluminium pigmented coating - metric series
|
| prEN 4404-1999
| 航空航天系列 有铝色涂层钛合金Ti44, 5 Cb通用头实心铆钉 米制
| Aerospace series - Rivets, solid, universal head, in titanium alloy Ti 44,5 Cb, with aluminium pigmented coating - metric series
|
| prEN 4407-1997
| 航空航天系列 有IVD铝涂层的钛合金全螺纹头标准六角螺栓 等级：1100 MPa(常温)/315度
| Aerospace series - Bolts, normal hexagonal head, threaded to head, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature)/425℃
|
| prEN 4473-1999
| 航空航天系列 铝涂层 技术规范
| Aerospace series - Aluminium pigmented coatings - Technical specification
|
| prEN 4474-1999
| 航空航天系列 铝涂层 涂覆方法
| Aerospace series - Aluminium pigmented coatings - Coating methods
|
| prEN 4495-1999
| 航空航天系列 铝涂层阳极氧化钛合金紧公差标准体短螺纹 标准六角头螺栓 等级：1100 MPa (环境温度下)/31
| Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃
|
| prEN 4496-1999
| 航空航天系列 铝涂层阳极氧化钛合金紧公差标准体短螺纹十字形埋头100度 标准头螺钉 等级：1100 MPa (环
| Aerospace series - Screws, 100?countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃
|
| prEN 4497-1999
| 航空航天系列 铝涂层阳极氧化钛合金紧公差标准体短螺纹十字口锥形头螺钉 等级：1100 MPa (环境温度下)/31
| Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃
|
| prEN 4498-1999
| 航空航天系列 铝涂层钝化耐热镍基合金紧公差标准体中长螺纹大双头六角头螺栓 等级：1550 MPa (环境温度下
| Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating - Classification: 1550 MPa (at ambient temperature)/315℃
|
| prEN 4499-1999
| 航空航天系列 铝涂层阳极氧化钛合金紧公差标准体短螺纹十字口矮头埋头100度螺钉 等级：1100 MPa (环境温
| Aerospace series - Screws, 100?countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃
|
| prEN 4501-1999
| 航空航天系列 铝涂层阳极氧化钛合金紧公差标准体短螺纹带肩薄六角头螺栓 等级：1100 MPa (环境温度下)/31
| Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃
|
| prEN 4509-1999
| 航空航天系列 铝涂层阳极氧化钛合金全螺纹十字口埋头100度 标准螺钉 等级：1100 MPa (环境温度下)/315℃
| Aerospace series - Screws, 100?countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃
|
| prEN 4603-1999
| 航空航天系列 紧固件的二硫化钼涂层 技术规范
| Aerospace series - Molybdenum disulphide coatings of fasteners - Technical specification
|
| prEN 61086-1-2002
| 承载印制电路板用涂料(敷形涂层) 第1部分：定义、分类和一般要求
| IEC 61086-1, Ed. 2: Coatings for loaded printed wire boards (conformal coatings) - Part 1: Definitions, classification and general requirements
|
| prEN 61086-2-2002
| 承载印制电路板用涂料(保护涂层) 第2部分：试验方法
| IEC 61086-2, Ed. 2: Coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test
|
| prEN 61086-3-1-2002
| 承载印制电路板用涂料(保护涂层) 第3部分：单项材料规范 第1节：通用(I类)、高可靠性(II类)和航空涂料
| IEC 61086-3-1, Ed. 2: Coatings for loaded printed wire boards (conformal coatings) - Part 3: Specifications for individual materials; Section 1: Coatings for general purpose (class 1), high reliability (class 2) and for aerospace (class 3)
|
| prEN 971-2-1996
| 色漆和清漆 涂层材料的术语和定义 第2部分：与油漆特性和性能有关的特定术语
| Paints and varnishes - Terms and definitions for coating materials - Part 2: Special terms relating to paint characteristics and properties
|
| prEN 971-3-1996
| 色漆和清漆 涂层材料的术语和定义 第3部分：表面准备和应用方法
| Paints and varnishes - Terms and definitions for coating materials - Part 3: Surface preparation and application methods
|
| prEN ISO 14924-2002
| 热喷涂 热喷涂层的后处理及终饰
| Thermal spraying - Post-treatment and finishing of thermally sprayed coatings (ISO/DIS 14924:2002)
|
| prEN ISO 2360-2003
| 非磁性基金属上非导电涂层 镀层厚度的测量 振幅灵敏的涡流法
| Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method (ISO/FDIS 2360:2003) / Note: Intended as replacement for EN ISO 2360 (1995-01).
|
| 编号 | 中文名称 | 英文名称 |
|---|