| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| ANSI NGV 4.8-2002 | 天然气机车加气站压缩机使用导则 | Natural Gas Vehicle Fueling Station Compressor Guidelines |
| ANSI/AGMA 2011-A-1998 | 圆柱形涡轮传动装置公差和检验方法 | Cylindrical Wormgearing Tolerance and Inspection Methods |
| ANSI/AGMA 2111-A-1998 | 圆柱形涡轮传动装置公差和检验方法(米制) | Cylindrical Wormgearing Tolerance and Inspection Methods (Metric) |
| ANSI/AGMA 6006-2004 | 风力涡轮机齿轮箱的设计和规范 | Design and Specification of Gearboxes for Wind Turbines |
| ANSI/AGMA 6017-E-1986 | 一次和多次缩减的双箱涡轮和螺旋涡轮的应用和评定 | Rating and Application of Single and Multiple Reduction Double-Enveloping Worm and Helical Worm |
| ANSI/AGMA 6022-C-1993 | 圆柱形涡轮传动装置的设计手册 | Design Manual for Cylindrical Wormgearing |
| ANSI/AGMA 6030-C-1987 | 工业双箱涡轮传动装置的设计 | Design of Industrial Double-Enveloping Wormgears |
| ANSI/AGMA 6034-B-1992 | 封闭的圆柱形涡轮减速器和齿轮电动机的操作规程 | Practice for Enclosed Cylindrical Wormgear Speed Reducers and Gearmotors |
| ANSI/API 612(ISO 10437-2003)-2005 | 石油、石化和天然气工业.蒸汽涡轮.专用设施 | Petroleum, Petrochemical and Natural Gas Industries - Steam Turbines - Special-Purpose Applications |
| ANSI/API 612-2005 | 石油、石化和天然气行业-蒸汽涡轮－专用 | Petroleum, Petrochemical and Natural Gas Industries - Steam Turbines - Special-Purpose Applications |
| ANSI/ASME MFC-4M-1986 | 用涡轮仪测量气体流量 | Measurement of Gas Flow by Turbine Meters |
| ANSI/ASME PTC10-1998 | 性能测试规范.压缩机及排气机 | Performance Test Code - Compressors and Exhausters |
| ANSI/ASME PTC18-2002 | 水轮机和泵.涡轮机 | Hydraulic Turbines and Pump - Turbines |
| ANSI/ASME PTC29-2005 | 水力涡轮发电机组的速度调节系统 | Speed Governing Systems for Hydraulic Turbine Generators Units |
| ANSI/ASME PTC42-1988 | 风力涡轮机 | Wind Turbines |
| ANSI/ASME PTC6.2-2004 | 联合循环蒸汽涡轮机 | Steam Turbines in Combined Cycles |
| ANSI/ASTM A768-1996 | 涡轮机转子及轴用经真空处理的12/T%铬合金钢锻件规范 | Specification for Vacuum-Treated 12/T% Chromium Alloy Steel Forgings for Turbine Rotors and Shafts |
| ANSI/ASTM A940-1996 | 涡轮转子用差温热处理真空处理钢锻件、合金规范 | Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors |
| ANSI/ASTM D1322-1997 | 航空涡轮燃油烟点测试方法(05.01) | Smoke Point of Aviation Turbine Fuels, Method of Test for (05.01) |
| ANSI/ASTM D1740-1996 | 航空涡轮机燃料光度计数目测试方法(05.01) | Test Method for Luminometer Numbers of Aviation Turbine Fuels (05.01) |
| ANSI/ASTM D1840-2004 | 用紫外线分光光度测定法测定航空涡轮燃料中环烷属烃的试验方法(05.01) | Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry, Method of Test for (05.01) |
| ANSI/ASTM D2272-2002 | 用旋转式储气瓶测定蒸气涡轮机油氧化稳定性的标准试验方法(05.01) | Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel |
| ANSI/ASTM D2532-2004 | 低温静止后飞机燃气涡轮发动机润滑剂的粘度和粘度变化的试验方法 | Viscosity and Viscosity Change after Standing at Low Temperature of Aircraft Turbine Lubricants, Method of Test for (05.01) |
| ANSI/ASTM D3227-2004 | 汽油、煤油、航空涡轮和馏出燃料中硫醇含量的试验方法(电势滴定法) | Mercaptan Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method), Method of Test for (05.02) |
| ANSI/ASTM D3240-2005 | 航空涡轮燃料在水中不溶解度的测试方法 | Test Method for Undissolved Water in Aviation Turbine Fuels |
| ANSI/ASTM D3241a-2005 | 航空燃气涡轮机燃料热氧化稳定性的试验方法(JFTOT程序) | Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) |
| ANSI/ASTM D3242-2005 | 航空涡轮燃料酸度测试方法 | Test Method for Acidity in Aviation Turbine Fuel |
| ANSI/ASTM D3602-1990 | 航空涡轮燃料的水分离特性试验(现场试验)(05.02) | Water Separation Characteristics of Aviation Turbine Fuels (Field Test), Test for (05.02) |
| ANSI/ASTM D3603-1993 | 在有水的情况下蒸气涡轮油的防锈特性试验方法(卧式圆盘法)(05.02) | Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method), Test for (05.02) |
| ANSI/ASTM D3605-2005 | 用原子吸收和火焰发射光谱法测定燃气涡轮机燃料中痕量金属的试验方法 | Test Method for Trace Metals in Gas Turbine Fuels by Atomic ABSorption and Flame Emission Spectroscopy |
| ANSI/ASTM D3701-2001 | 低分辨核磁共振光谱法测定航空涡轮机燃料中氢含量的试验方法 | Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry (05.02) |
| ANSI/ASTM D3703-1999 | 航空涡轮机燃料过氧化值试验(05.02) | Peroxide Number of Aviation Turbine Fuels, Test for (05.02) |
| ANSI/ASTM D3948-2005 | 利用便携式分离仪测定航空涡轮机燃料中水分离的试验方法 | Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer |
| ANSI/ASTM D4054-1993 | 添加剂与航空涡轮机燃料和飞机燃油系统材料相容性的评价 | Evaluating the Compatability of Additives with Aviation Turbine Fuels and Aircraft Fuel System Materials (05.02) |
| ANSI/ASTM D4248-1999 | 蒸汽涡轮发电机油路系统设计(05.02) | Design of Steam Turbine Generator Oil Systems (05.02) |
| ANSI/ASTM D4293-1983 | 涡轮机润滑用磷酸盐酯基液体规范 | Phosphate Ester Based Fluids for Turbine Lubrication, Specification for (05.02) |
| ANSI/ASTM D5001-2004 | 用汽缸上球式(BOCLE)润滑性评定仪测量航空涡轮机燃料润滑性的试验方法 | Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (Bocle) (05.03) |
| ANSI/ASTM D5186-2003 | 超临界流体色谱法测定柴油燃料和航空燃气涡轮燃料中芳香烃含量和多核芳香烃的试验方法 | Test Method for the Determination of the Aromatic Content and Polynuclear of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography |
| ANSI/ASTM D5677-2005 | 用于航空喷气机涡轮燃料的玻璃纤维(玻璃纤维加固热硬化树脂)管与管件规范.粘合剂粘接接头型 | Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines |
| ANSI/ASTM D5677-2005 | 用于航空喷气机涡轮燃料的玻璃纤维(玻璃纤维加固热硬化树脂)管与管件规范.粘合剂粘接接头型 | Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines |
| ANSI/ASTM D5846-2002 | 液压流体和涡轮机油的一般氧化试验方法 | Test Method for Universal Oxidation Test for Hydraulic Fluids and Turbine Oils |
| ANSI/ASTM D5862-2004 | 二冲程循环涡轮增压6v92ta柴油发动机机油评价的试验方法 | Test Method for Evaluation of Engine Oils in the Two-Stroke Cycle Turbo-Supercharged 6v92ta Diesel Engine |
| ANSI/ASTM D6439-2005 | 蒸汽、气体和水电涡轮润滑系统的清洁、冲洗和纯化指南 | Guide for Cleaning, Flushing and Purification of Steam, Gas and Hydroelectric Turbine Lubrication Systems |
| ANSI/ASTM D6447-2004 | 用伏安测量分析法测定航空涡轮燃料的氢过氧化物值的试验方法 | Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis |
| ANSI/ASTM D6615-2006 | 喷射B类宽馏分航空涡轮燃料规范 | Specification for Jet B Wide-Cut Aviation Turbine Fuel |
| ANSI/ASTM D6728-2001 | 采用旋转圆盘电极原子发射光谱法测定气体涡轮机和柴油机燃料杂质的试验方法 | Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry |
| ANSI/ASTM D6811-2002 | 湍流条件下测量航空器涡轮机燃料热稳定性的试验方法 | Test Method of Measurement of Thermal Stability of Aviation Turbine Fuels under Turbulent Flow Conditions (HIRETS Method) |
| ANSI/ASTM D6812b-2004 | 涡轮增压/增压式火花点火式飞行器发动机的地面站辛烷值法实施规程 | Practice for Ground-based Octane Rating Procedures for Turbocharged/supercharged Spark Ignition Aircraft Engines |
| ANSI/ASTM D6824-2004 | 测定航空涡轮机燃料的可滤性的试验方法 | Test Method for Determining Filterability of Aviation Turbine Fuel |
| ANSI/ASTM D6894-2003 | 直接喷射式涡轮增压汽车柴油发动机的机油的抗混气性能的评价试验方法 | Test Method for Evaluation of the Aeration Resistance of Engine Oils in a Direct-injected Turbocharged Automotive Diesel Engine |
| ANSI/ASTM D7058-2004 | 用便携式可见光谱测定仪评估航空涡轮燃料和煤油的赛波特颜色和测定红色染料浓度的标准试验方法 | Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer1 |
| ANSI/ASTM D7224-2006 | 利用便携式分离器测定煤油型航空涡轮机燃料水分离特性的试验方法 | Test Method for Determining Water Separation characteristics of Kerosene-type Aviation Turbine Fuels Containing Additives by Portable Separometer |
| ANSI/ASTM F1692-2001 | 家庭中央真空吸尘系统涡轮动力喷嘴寿命评估试验方法 | Test Method for Life Evaluation of aTurbine Powered Nozzle for Household Central Vacuum Cleaning Systems |
| ANSI/AWWA C701-2002 | 家用涡轮式冷水表 | Cold Water Meters - Turbine Type for Customer Service |
| ANSI/IEEE 1207-2004 | 水力发电装置用涡轮控制系统的应用指南 | Guide for the Application of Turbine Governing Systems for Hydroelectric Generating Units |
| ANSI/IEEE 67-2005 | 涡轮发电机的操作和维护指南 | Guide for the Operation and Maintenance of Turbine Generators |
| ASME B133.9-1994 | 固定式燃气涡轮内机的废气排放测量 | (Measurement of exhaust emissions from stationary gas turbine engines) |
| ASME PTC 22-1997 | 燃气涡轮机的性能试验规则 | (Performance test code on gas turbines) |
| ASME PTC 42-1988 | 风力涡轮机 | (Wind turbines) |
| ASTM A 288-1991 | 涡轮发电机磁性定位环用碳素钢和合金钢锻件 | Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators |
| ASTM A 418/A 418M-2005 | 涡轮机及发电机钢转子锻件超声波检验的标准试验方法 | Standard Test Method for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings |
| ASTM A 470/A 470M-2005 | 涡轮转子和轴用经真空处理的碳素钢和合金钢锻件的标准规范 | Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts |
| ASTM A 472/A 472M-2005 | 蒸汽涡轮机轴及转子锻件热稳定性的标准试验方法 | Standard Test Method for Heat Stability of Steam Turbine Shafts and Rotor Forgings |
| ASTM A 531/A 531M-1991 | 涡轮发电机钢定位环的超声波检验 | Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings |
| ASTM A 768/A 768M-2005 | 涡轮机转子及轴用经真空处理的含铬12%的合金钢锻件的标准规范 | Standard Specification for Vacuum-Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotors and Shafts |
| ASTM A 891-1998 | 涡轮机转子圆盘和轮用沉淀硬化铁基超合金钢锻件的标准规范 | Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels |
| ASTM A 982/A 982M-2005 | 压缩机和涡轮机翼片用不锈钢锻件的标准规范 | Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils |
| ASTM ANS/IEC 60601.2.12-2001 | 医疗电气设备.第2-12部分:肺部通气机安全的特殊要求.与美国国家标准有偏差的ASTM国际标准认可的急救用通气 | Medical Electrical Equipment - Part 2-12; Particular Requirements for the Safety of Lung Ventilators - Critical Care Ventilators Approved as an American National Standard with Deviations by ASTM International |
| ASTM B 66-1995 | 蒸气机车易损部件用青铜铸件的标准规范 | Standard Specification for Bronze Castings for Steam Locomotive Wearing Parts |
| ASTM D 1322-1997 | 煤油和航空涡轮机燃料烟点的标准试验方法 | Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel |
| ASTM D 1740-2001 | 航空涡轮机燃料发光计值的标准试验方法 | Standard Test Method for Luminometer Numbers of Aviation Turbine Fuels |
| ASTM D 1840-2003 | 紫外线分光光度法测定航空涡轮机燃料中萘烃的标准试验方法 | Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry |
| ASTM D 3227a-2004 | 电位差法测定汽油、煤油、航空涡轮机燃料及馏分燃料中硫醇态硫含量的标准试验方法 | Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method) |
| ASTM D 3240-2005 | 航空涡轮机燃料中不溶解水的标准试验方法 | Standard Test Method for Undissolved Water In Aviation Turbine Fuels |
| ASTM D 3242-2005 | 航空涡轮机燃料酸度的标准试验方法 | Standard Test Method for Acidity in Aviation Turbine Fuel |
| ASTM D 3701-2001 | 低分辨核磁共振光谱法测定航空涡轮机燃料中氢含量的标准试验方法 | Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry |
| ASTM D 3703-1999 | 测定航空燃气涡轮发动机用燃料过氧化值的试验方法 | Standard Test Method for Peroxide Number of Aviation Turbine Fuels |
| ASTM D 4054-1993 | 添加剂与航空涡轮机燃料和飞机燃烧体系材料相容性评价的标准实施规程 | Standard Practice for Evaluating the Compatibility of Additives with Aviation-Turbine Fuels and Aircraft Fuel System Materials |
| ASTM D 4241-1998 | 气体涡轮发电机润滑油系统设计的标准实施规范 | Standard Practice for Design of Gas Turbine Generator Lubricating Oil Systems |
| ASTM D 4248-1998 | 蒸气涡轮发电机润滑油系统设计的标准实施规范 | Standard Practice for Design of Steam Turbine Generator Oil Systems |
| ASTM D 4293-1983 | 涡轮机润滑用磷酸酯基液体的标准规范 | Standard Specification for Phosphate Ester Based Fluids for Turbine Lubrication |
| ASTM D 4636-1999 | 液压油、飞机涡轮发动机润滑油和其他高精炼油的腐蚀性和氧化稳定性的试验方法 | Standard Test Method for Corrosiveness and Oxidation qualility of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils |
| ASTM D 5001-2003 | 用汽缸上球式(BOCLE)润滑性评定仪测量航空涡轮机燃料润滑性的标准试验方法 | Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE) |
| ASTM D 5186-2003 | 用超临界流体色谱法测定柴油和航空涡轮燃料中芳香烃含量和多核芳香烃含量的标准试验方法 | Standard Test Method for Determination of Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography |
| ASTM D 5677-2005 | 用于航空喷气涡轮机燃料管线的胶粘剂结合型玻璃纤维(玻璃纤维增强热固性树脂)管及管配件标准规范 | Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines |
| ASTM D 5846-2002 | 使用通用氧化试验设备进行液压液和涡轮机油的通用氧化试验的标准试验方法 | Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus |
| ASTM D 5862-2003 | 评价二冲程循环涡轮增压式6V92TA柴油发动机中发动机油的标准试验方法 | Standard Test Method for Evaluation of Engine Oils in Two-Stroke Cycle Turbo-Supercharged 6V92TA Diesel Engine |
| ASTM D 6447-2003 | 用伏安测量分析法测定航空涡轮机燃料中氢过氧化物值的标准试验方法 | Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis |
| ASTM D 6615-2006 | 喷口B广馏份航空涡轮机燃料标准规范 | Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel |
| ASTM D 6810-2002 | 用线性扫描伏特计测定HL涡轮机油中的受阻碍酚型抗氧剂含量的标准试验方法 | Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in HL Turbine Oils by Linear Sweep Voltammetry |
| ASTM D 6811-2002 | 在快速流动条件下测定飞行器涡轮机燃料的热稳定性的标准试验方法 | Standard Test Method for Measurement of Thermal Stability of Aviation Turbine Fuels under Turbulent Flow Conditions (HiReTS Method)1, 2 |
| ASTM D 6812a-2004 | 涡轮增压/增压火花点火式飞机发动机的地面辛烷值测定的标准实施规程 | Standard Practice for Ground-Based Octane Rating Procedures for Turbocharged/Supercharged Spark Ignition Aircraft Engines |
| ASTM D 6824-2004 | 测定航空涡轮机燃料可滤性的标准试验方法 | Standard Test Method for Determining Filterability of Aviation Turbine Fuel |
| ASTM D 6894-2003 | 直喷式涡轮增压汽车柴油发动机中机油透气阻力评价的标准试验方法 | Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine |
| ASTM D 6971-2004 | 用线性扫描伏安法测量无锌涡轮机油中受阻酚和芳香胺抗氧化剂含量的标准试验方法 | Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry |
| ASTM D 7058-2004 | 用便携式可视分光光度仪评估航空涡轮机燃料和煤油的赛波特色彩和测定红色染料的浓度的标准试验方法 | Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer |
| ASTM D 7223-2005 | 航空认证涡轮机燃料标准规范 | Standard Specification for Aviation Certification Turbine Fuel |
| ASTM D 7224-2005 | 便携式分离仪测定含添加剂的煤油型航空涡轮机燃料脱水性能标准试验方法 | Standard Test Method for Determining Water Separation Characteristics of Kerosine-type Aviation Turbine Fuels Containing Additives by Portable Separometer |
| ASTM E 2104-2001 | 高级航空涡轮机材料和元件的放射性检验的标准实施规程 | Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components |
| ASTM F 1692-2001 | 家用中央真空除尘系统用涡轮动力排气管寿命评定的标准试验方法 | Standard Test Method for Life Evaluation of a Turbine-Powered Nozzle for Household Central Vacuum Cleaning Systems |
| ASTM IEC 60601.2.12-2001 | 医疗电气设备.第2-12部分:肺通气机安全的特殊要求.临床护理用通气机 | Medical Electrical Equipment - Part 2-12; Particular Requirements for the Safety of Lung Ventilators - Critical Care Ventilators |
| BS 1571-2-1975 | 容积式压缩机与排气机的试验.第2部分:空气压缩机与排气机的简化验收方法 | Specification for testing of positive displacement compressors and exhausters - Methods for simplified acceptance testing for air compressors and exhausters |
| BS 2000-280-1999 | 石油及其产品的试验方法.石油产品和润滑剂.抗氧化剂涡轮机矿物油.氧化稳定性的测定 | Methods of test for petroleum and its products - Petroleum products and lubricants - Inhibited mineral turbine oils - Determination of oxidation stability |
| BS 489-1999 | 涡轮机润滑剂规范 | Specification for turbine lubricants |
| BS 5860-1980 | 水轮机、蓄水泵及涡轮泵的效率测定方法(热力学法) | Method for measuring the efficiency of hydraulic turbines, storage pumps and pump-turbines (thermodynamic method) |
| BS 6413-5-1988 | 润滑油、工业用油和有关产品(L级).第5部分:系列T的分类(涡轮) | Lubricants, industrial oils and related products (class L) - Classification for family T (turbines) |
| BS 7721-1994 | 燃气涡轮机及其装置.空气传播噪声的测量.工程/测量方法 | Gas turbines and gas turbine sets - Measurement of emitted airborne noise - Engineering/survey method |
| BS 7834-1995 | 密闭管道气流测量用涡轮表规范 | Specification for turbine meters used for the measurement of gas flow in closed conduits |
| BS 7924-1999 | 用于矿中沼气敏感的经检定的电气机械检修和翻修的实施规程 | Code of practice for the repair and overhaul of certified electrical apparatus intended for use in mines susceptible to firedamp |
| BS EN 12261-2002 | 煤气表.涡轮式煤气表 | Gas meters - Turbine gas meters |
| BS EN 13684-2004 | 园艺设备.可以在侧面步行操纵的通气机和松土机.安全 | Garden equipment - Pedestrian controlled aerators and scarifiers - Safety |
| BS EN 13996-2002 | 表面活性剂.发泡能力和防沫能力.涡轮搅拌法 | Surface active agents - Foaming power and antifoaming power - Turbine stirring method |
| BS EN 45510-5-3-1998 | 发电站设备采购指南.风力涡轮机 | Guide for the procurement of power station equipment - Wind turbines |
| BS EN 45510-6-1-1998 | 发电站设备采购指南.涡轮机辅助设备.空气分离器 | Guide for the procurement of power station equipment - Turbine auxiliaries - Deaerators |
| BS EN 45510-6-2-1998 | 发电站设备采购指南.涡轮机辅助设备.给水加热器 | Guide for the procurement of power station equipment - Turbine auxiliaries - Feedwater heaters |
| BS EN 45510-6-3-1998 | 发电站设备采购指南.涡轮机辅助设备.冷凝器设备 | Guide for the procurement of power station equipment - Turbine auxiliaries - Condenser plant |
| BS EN 45510-6-4-2000 | 发电站设备采购指南.涡轮机辅助设备.泵 | Guide for the procurement of power station equipment - Turbine auxiliaries - Pumps - Pumps |
| BS EN 45510-6-5-2000 | 发电站设备采购指南.涡轮机辅助设备.干式冷却系统.第5节:干式冷却系统 | Guide for the procurement of power station equipment - Turbine auxiliaries - Dry cooling systems - Section 5: Dry cooling systems |
| BS EN 45510-6-6-2000 | 发电站设备采购指南.涡轮机辅助设备.湿式和湿/干式冷却塔.第6节:湿式和湿/干式冷却塔 | Guide for the procurement of power station equipment - Turbine auxiliaries - Turbine auxiliaries - Wet and wet/dry cooling towers - Section 6: Wet/dry cooling towers |
| BS EN 45510-6-7-1998 | 发电站设备采购指南.涡轮机辅助设备.潮气分离再加热器 | Guide for the procurement of power station equipment - Turbine auxiliaries - Moisture separator reheaters |
| BS EN 45510-6-8-2000 | 发电站设备采购指南.涡轮机辅助设备.起重机.第8节:起重机 | Guide for the procurement of power station equipment - Turbine auxiliaries - Cranes - Section 8: Cranes |
| BS EN 45510-6-9-2000 | 发电站设备采购指南.涡轮机辅助设备.冷却水系统.第9节:冷却水系统 | Guide for the procurement of power station equipment - Turbine auxiliaries - Cooling water systems - Section 9: Cooling water systems |
| BS EN 60041-1995 | 水轮机,现场验收试验测定蓄水泵和涡轮泵液压性能 | Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines |
| BS EN 61221-2004 | 石油产品及润滑剂.三芳基磷酸酯涡轮机控制液(ISO-L-TCD类).规范 | Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications |
| BS EN 61362-1998 | 液压涡轮控制系统规范指南 | Guide to specification of hydroturbine control systems |
| BS EN 61400-11-2003 | 风力涡轮发电机系统.噪音测量技术 | Wind turbine generator systems - Acoustic noise measurement techniques |
| BS EN 62196-1-2004 | 电气机车输入端和机车连接器用插头和插座.电气机车传导冲电.250A交流和400A直流及以下的电气机车充电 | Plugs, socket-outlets, vehicle couplers and vehicle inlets - Conductive charging of electric vehicles - Charging of electric vehicles up to 250 A a.c. and 400 A d.c |
| BS EN 794-3-1999 | 肺呼吸机.急救和运送用的通气机的特殊要求 | Lung ventilators - Particular requirements for emergency and transport ventilators |
| BS EN ISO 10651-2-2004 | 医用肺通气机.基本安全和性能的特殊要求.通气机依赖型病人用家庭护理通气机 | Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Home care ventilators for ventilator-dependent patients |
| BS EN ISO 10651-4-2002 | 肺换气机.对操作人员控制的复苏器的特殊要求 | Lung ventilators - Particular requirements for operator-powered resuscitators |
| BS EN ISO 10651-6-2004 | 医用肺通气机.基本安全和性能的特殊要求.家庭保健通气机支撑装置 | Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Home-care ventilatory support devices |
| BS EN ISO 7785-1-1999 | 手持式牙科器械.高速空气涡轮钻头 | Dental handpieces - High-speed air turbine handpieces |
| BS EN ISO 9906-2000 | 涡轮式泵.液压性能验收试验.1和2级 | Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2 |
| BS G 102-1971 | 转动电气机械的一般要求规范 | Specification for general requirements for rotating electrical machinery |
| BS IEC 60609-2-1998 | 水轮机、蓄能泵和水泵涡轮机空穴评估.水戽式水轮机的评估 | Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump turbines - Evaluation in Pelton turbines |
| BS IEC 61366-1-1998 | 水轮机、蓄能泵和水泵涡轮.投标文件.综述及附录 | Hydraulic turbines, storage pumps, and pump turbines - Tendering documents - General and annexes |
| BS IEC 61366-2-1998 | 水轮机、蓄能泵和水泵涡轮.投标文件.弗兰西斯涡轮机技术规范指南 | Hydraulic turbines, storage pumps, and pump turbines - Tendering documents - Guidelines for technical specifications for Francis turbines |
| BS IEC 61366-3-1998 | 水轮机、蓄能泵和水泵涡轮.投标文件.水戽式水轮机的技术规范指南 | Hydraulic turbines, storage pumps, and pump turbines - Tendering documents - Guidelines for technical specifications for Pelton turbines |
| BS IEC 61366-4-1998 | 水轮机、蓄能泵和水泵涡轮.投标文件.卡普兰式水轮机和推进式水轮机的技术规范指南 | Hydraulic turbines, storage pumps, and pump turbines - Tendering documents - Guidelines for technical specifications for Kaplan and propeller turbines |
| BS IEC 61366-5-1998 | 水轮机、蓄能泵和水泵涡轮.投标文件.管状水轮机技术规范指南 | Hydraulic turbines, storage pumps, and pump turbines - Tendering documents - Guidelines for technical specifications for tubular turbines |
| BS IEC 61366-6-1998 | 水轮机、蓄能泵和水泵涡轮.投标文件.水泵涡轮技术规范指南 | Hydraulic turbines, storage pumps, and pump turbines - Tendering documents - Guidelines for technical specifications for pump-turbines |
| BS IEC 61366-7-1998 | 水轮机、蓄能泵和水泵涡轮.投标文件.蓄水泵技术规范指南 | Hydraulic turbines, storage pumps, and pump turbines - Tendering documents - Guidelines for technical specifications for storage pumps |
| BS ISO 12097-3-2003 | 道路车辆.气囊零部件.充气机组件的检验 | Road vehicles - Airbag components - Testing of inflator assemblies |
| BS ISO 14661-2000 | 工业用热涡轮机(蒸气涡轮机、气体膨胀式轮机).一般要求 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) - General requirements |
| BS ISO 15911-2001 | 石油及其制品的试验方法.采用氢含量数据对航空涡轮发动机燃料净单位能量的评估 | Methods of test for petroleum and its products - Estimation of net specific energy of aviation turbine fuels using hydrogen content data |
| BS ISO 5389-2006 | 涡轮压缩机.性能试验编码 | Turbocompressors - Performance test code |
| DD ENV 61400-1-1995 | 风力涡轮发电机系统.第1部分:安全性要求 | Wind turbine generator systems. Safety requirements |
| DIN 14426-1985 | 消防队用轻便式涡轮潜水泵 | Portable submerged turbopump for fire brigade |
| DIN 28428-1978 | 真空技术.涡轮分子泵的验收规则 | Vacuum technology; acceptance specifications for turbomolecular pumps |
| DIN 3017-1-1998 | 涡轮传动软管卡圈.A型 | Hose clamps with worm gear drive; shape A |
| DIN 42018-1981 | 家用电气机器用排水泵.连接尺寸和检验 | Drain pumps for use in electric domestic machines; connection dimensions and test |
| DIN 42923-1971 | 旋转电气机械用滑轨 | Slide rails for rotating electrical machinery |
| DIN 42966-1961 | 电气机械用的连杆式球轴承.公差和径向间隙 | Ball bearings, conrad type, for electrical machines; tolerances and radial clearance |
| DIN 43044-1969 | 旋转电气机械用带支架刷握.主要尺寸 | Leg-type-brush-holders for electrical machinery; main dimensions |
| DIN 4305-1-1968 | 蒸汽轮机.涡轮机组件和零件术语 | Steam turbines; terms of assemblies and parts of the turbine |
| DIN 4312-1983 | 工业式涡轮机:蒸汽机和气体膨胀式涡轮机:工业式涡轮机建造原则 | Industrial-type turbines; steam turbines and gas expansion turbines; construction principles for industrial-type turbines |
| DIN 45635-15-1987 | 机器空气噪声的测量.包络面法.热电站用的涡轮发电机组 | Measurement of airborne noise emitted by machines; enveloping surface method; turbogenerator sets for use in thermal power stations |
| DIN 51436-1989 | 石油制品的试验.航空涡轮机燃料中防冰冻剂含量的测定.红外线光谱测定法 | Testing of petroleum products; determination of the content of icing inhibitors in aviation turbine fuels; infrared spectrometry |
| DIN 51535-2003 | 石油产品的试验.发动机润滑油在增压柴油发动机的废气涡轮增压器和中冷器中形成沉积物的趋势测定 | Testing of petroleum products - Determination of deposition forming tendency of motor oils in exhaust turbochargers and intercoolers of supercharged diesel engines |
| DIN 85005-11-1999 | 船舶和航海技术.技术文献的图形符号.第11部分:涡轮 | Ships and marine technology - Graphical symbols for technical documentation - Part 11: Turbines |
| DIN EN 12261-2002 | 煤气表.涡轮式煤气表; 德文版本 EN 12261:2002 | Gas meters - Turbine gas meters; German version EN 12261:2002 |
| DIN EN 13684-2004 | 园艺设备.可在侧面控制的草坪通气机和松土机.安全 | Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety; German version EN 13684:2004 |
| DIN EN 45510-5-3-1998 | 发电厂设备购置说明.第5-3部分:风力涡轮机 | Guide for procurement of power station equipment - Part 5-3: Wind turbines; German version EN 45510-5-3:1998 |
| DIN EN 45510-5-4-1998 | 发电厂设备购置说明.第5-4部分:水轮机、蓄水储能泵和泵涡轮机 | Guide for procurement of power station equipment - Part 5-4: Hydraulic turbines, storage-pumps and pump-turbines; German version EN 45510-5-4:1998 |
| DIN EN 45510-6-1-1998 | 发电厂设备购置说明.第6-1部分:涡轮机辅助设备.除气器 | Guide for procurement of power station equipment - Part 6-1: Turbine auxiliaries; deaerators; German version EN 45510-6-1:1998 |
| DIN EN 45510-6-2-1998 | 发电厂设备购置说明.第6-2部分:涡轮机辅助设备.给水加热器 | Guide for procurement of power station equipment - Part 6-2: Turbine auxiliaries; feedwater heaters; German version EN 45510-6-2:1998 |
| DIN EN 45510-6-3-1998 | 发电厂设备购置说明.第6-3部分:涡轮机辅助设备.冷凝设备 | Guide for procurement of power station equipment - Part 6-3: Turbine auxiliaries; condensator plant; German version EN 45510-6-3:1998 |
| DIN EN 45510-6-4-2000 | 发电厂设备购置指南.第6-4部分:涡轮机辅助设备和泵 | Guide for procurement of power station equipment - Part 6-4: Turbine auxiliaries; pumps; German version EN 45510-6-4:1999 |
| DIN EN 45510-6-5-2000 | 发电厂设备购置指南.第6-5部分:涡轮机辅助设备和干燥冷却系统 | Guide for procurement of power station equipment - Part 6-5: Turbine auxiliaries; dry cooling systems; German version EN 45510-6-5:1999 |
| DIN EN 45510-6-6-2000 | 发电厂设备采购指南.第6-6部分:涡轮机辅助设备、湿式和湿式/干燥冷却塔 | Guide for procurement of power station equipment - Part 6-6: Turbine auxiliaries; wet and wet/dry cooling towers; German version EN 45510-6-6:1999 |
| DIN EN 45510-6-7-1998 | 发电厂设备购置说明.第6-7部分:涡轮机辅助设备.去湿再加热器 | Guide for procurement of power station equipment - Part 6-7: Turbine auxiliaries; Moisture separator reheaters; German version EN 45510-6-7:1998 |
| DIN EN 45510-6-8-2000 | 发电厂设备采购指南.第6-8部分:涡轮机辅助设备和起重机 | Guide for procurement of power station equipment - Part 6-8: Turbine auxiliaries; cranes; German version EN 45510-6-8:1999 |
| DIN EN 45510-6-9-2000 | 发电厂设备购置指南.第6-9部分:涡轮机辅设备和冷却水系统 | Guide for procurement of power station equipment - Part 6-9: Turbine auxiliaries; cooling water systems; German version EN 45510-6-9:1999 |
| DIN EN 50308-2005 | 风力涡轮机.防护措施.设计、操作和维修的要求 | Wind turbines - Protective measures - Requirements for design, operation and maintenance; German version EN 50308:2004 |
| DIN EN 61221-2005 | 石油产品和润滑剂.三芳基磷酸酯涡轮机控制液(ISO-L-TCD类).规范 | Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications (IEC 61221:2004); German version EN 61221:2004 |
| DIN EN 61400-11-2003 | 风力涡轮机发电机系统.第11部分:噪音测量技术 | Wind turbine generator systems - Part 11: Acoustic noise measurement techniques (IEC 61400-11:2002); German version EN 61400-11:2003 |
| DIN EN 61400-12-1999 | 风涡轮发电机组.第12部分:风涡轮机动力特性测试 | Wind turbine generator systems - Part 12: Wind turbines power performance testing (IEC 61400-12:1998); German version EN 61400-12:1998 |
| DIN EN 61400-2-1998 | 风力涡轮发电机组.第2部分:小型风力涡轮发电机安全性 | Wind turbine generator systems - Part 2: Safety of small wind turbines (IEC 61400-2:1996); German version EN 61400-2:1996 |
| DIN EN 61400-21-2002 | 鼓风涡轮发电机系统.第21部分:网格连接式鼓风涡轮机动力质量特性的测量和评估 (IEC 61400-21:2001); 德文版 | Wind turbine generator systems - Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines (IEC 61400-21:2001); German version EN 61400-21:2002 |
| DIN EN 794-3/A1-2005 | 肺通气机.第3部分:应急和移动式通气机的特殊要求 | Lung ventilators - Part 3: Particular requirements for emergency and transport ventilators; German version EN 794-3:1998/A1:2005 |
| DIN EN ISO 10651-2-2004 | 医用肺通气机.基本安全和性能的特殊要求.第2部分:通气机依赖型病人用家庭保健通气机 | Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 2: Home care ventilators for ventilator-dependent patients (ISO 10651-2:2004); German version EN ISO 10651-2:2004 |
| DIN EN ISO 10651-6-2004 | 医疗用肺通气机.基本安全和性能的特殊要求.第6部分:家庭保健通气机支持设备 | Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 6: Home-care ventilatory support devices (ISO 10651-6:2004); German version EN ISO 10651-6:2004 |
| DIN EN ISO 7785-1-1999 | 手持式牙科器械.第1部分:高速空气涡轮手持器械 | Dental handpieces - Part 1: High-speed air turbine handpieces (ISO 7785-1:1997); German version EN ISO 7785-1:1999 |
| DIN ISO 10816-2-2002 | 机械振动.通过测量非旋转部件评定机械振动.第2部分:标定运行速度1500r/min、1800r/min、3000r/min和3600r/m | Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min (ISO 10816-2:2001) |
| DIN ISO 10816-4-1998 | 机械振动.对非旋转部件进行测量以评定机械振动.第4部分:不包括飞行器改型产品的燃气涡轮驱动装置 | Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 4: Gas turbine driven sets excluding aircraft derivatives (ISO 10816-4:1998) |
| DIN ISO 7919-2-2002 | 机械振动.通过测量旋转轴评定机械振动.第2部分:标定运行速度1500r/min、1800r/min、3000r/min和3600r/min的 | Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min (ISO 7919-2:2001) |
| EN 12157-1999 | 涡轮泵 机床冷却泵组 额定流量和尺寸 | Rotodynamic pumps - Coolant pumps units for machine tools - Nominal flow rate, dimensions |
| EN 12261-2002+AC-2003 | 气量计 涡轮式气量计 | Gas meters - Turbine gas meters |
| EN 13996-2002 | 表面活性剂 起泡粉未和消泡粉未 涡轮搅拌法 | Surface active agents - Foaming power and antifoaming power - Turbine stirring method |
| EN 45510-5-3-1998 | 发电站设备采购指南 第5-3部分：.风力涡轮机 | Guide for procurement of power station equipment - Part 5-3: Wind turbines |
| EN 45510-5-4-1998 | 发电站设备采购指南 第5-4部分：.水力涡轮机、水力、液力存储器泵和涡轮泵 | Guide for procurement of power station equipment - Part 5-4: Hydraulic turbines, storage, pumps and pump-turbines |
| EN 45510-6-1-1998 | 发电站设备采购指南 第6-1部分：.涡轮机辅助设备 脱气器 | Guide for procurement of power station equipment - Part 6-1: Turbine auxiliaries - Deaerators |
| EN 45510-6-2-1998 | 发电站设备采购指南 第6-2部分：涡轮机辅助设备 给水加热器 | Guide for procurement of power station equipment - Part 6-2: Turbine auxiliaries - Feedwater heaters |
| EN 45510-6-3-1998 | 发电站设备采购指南 第6-3部分：涡轮机辅助设备 冷凝设备 | Guide for procurement of power station equipment - Part 6-3: Turbine auxiliaries - Condenser plant |
| EN 45510-6-4-1999 | 发电站设备采购指南 第6-4部分：涡轮机辅助设备 泵 | Guide for procurement of power station equipment - Part 6-4: Turbine auxiliaries - Pumps |
| EN 45510-6-5-1999 | 发电站设备采购指南 第6-5部分：涡轮机辅助设备 干式冷却系统 | Guide for procurement of power station equipment - Part 6-5: Turbine auxiliaries - Dry cooling systems |
| EN 45510-6-6-1999 | 发电站设备采购指南 第6-6部分：涡轮机辅助设备 湿式和湿/干式冷却塔 | Guide for procurement of power station equipment - Part 6-6: Turbine auxiliaries - Wet and wet/dry cooling towers |
| EN 45510-6-7-1998 | 发电站设备采购指南 第6-7部：涡轮机辅助设备 潮气分离回热炉 | Guide for procurement of power station equipment - Part 6-7: Turbine auxiliaries - Moisture separator reheaters |
| EN 45510-6-8-1999 | 发电站设备采购指南 第6-8部分：涡轮机辅助设备 起重机 | Guide for procurement of power station equipment - Part 6-8: Turbine auxiliaries - Cranes |
| EN 45510-6-9-1999 | 发电站设备采购指南 第6-9部分：涡轮机辅助设备 冷却水系统 | Guide for procurement of power station equipment - Part 6-9: Turbine auxiliaries - Cooling water systems |
| EN 50237-1997 | 用于电气机械保护目的的手套和连指手套 | Gloves and mitts with mechanical protection for electrical purposes |
| EN 60034-3-1995 | 旋转电机 第3部分：涡轮型同步电机的特殊要求 | Rotating electrical machines - Part 3: Specific requirements for turbine-type synchronous machines (IEC 60034-3:1988) |
| EN 61221-1995 | 石油产品和润滑剂 三方基磷酸酯涡轮机控制液 规范 | Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (categorie ISO-L-TCD) - Specifications (IEC 61221:1993) |
| EN 61400-21-2002 | 风轮发电机系统 第21部分：栅格连接的风力涡轮机动力质量特性的测量和评估 | Wind turbine generator systems - Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines (IEC 61400-21:2001) |
| EN ISO 10651-4-2002 | 医用肺通气机 第4部分：操作者控制的呼吸机的特殊要求 | Lung ventilators - Part 4: Particular requirements for operator-powered resuscitators (ISO 10651-4:2002) |
| EN ISO 7785-1-1999 | 牙科手机 第1部分：高速气动涡轮手机 | Dental handpieces - Part 1: High-speed air turbine handpieces (ISO 7785-1:1997) |
| GB 439-1990 | 航空喷气机润滑油 | Aviation jet engine lubricating oils |
| GB/T 10429-2006 | 单级向心涡轮液力变矩器型式和基本参数 | Single-stage centripetal turbine torque converters―Types and basic parameters |
| GB/T 10856-2006 | 双涡轮液力变矩器技术条件 | Double turbine torque converter―Specification |
| GB/T 13410-1992 | 船用柴油机涡轮增压器技术条件 | The technical specifications of turbochargers used for marine diesel engines |
| GB/T 17289-1998 | 液态烃体积测量涡轮流量计计量系统 | Liquid hydrocarbons--Volumetric measurement by turbine meter system |
| GB/T 18940-2003 | 封闭管道中气体流量的测量涡轮流量计 | Measurement of gas flow in closedconduits--Turbine meters |
| GB/T 19235-2003 | 液化石油气加气机加气枪 | Fueling nozzle for LPG dispenser |
| GB/T 19236-2003 | 压缩天然气加气机加气枪 | Fueling nozzle for CNG dispenser |
| GB/T 19237-2003 | 汽车用压缩天然气加气机 | Compressed natural gas dispenser for vehicle |
| GB/T 19238-2003 | 汽车用液化石油气加气机 | Liquefied petroleum gas dispenser for vehicle |
| GB/T 20410-2006 | 涡轮机高温螺栓用钢 | Steels for turbine bolts at high temperature |
| GB/T 727-2003 | 涡轮增压器产品命名和型号编制方法 | Turbocharger nomenclature and code |
| GB/T 7774-1987 | 涡轮分子泵性能测试方法 | Methods of measurement of the performance characteristics of turbo-molecular pumps |
| GB/T 9485-2003 | 径流式涡轮增压器联接尺寸 | Radial turbochargers--Connection dimensions |
| HG/T 3796.4-2005 | 开启涡轮式搅拌器 | () |
| HG/T 3796.5-2005 | 圆盘涡轮式搅拌器 | () |
| IEC 60601-2-12-2001 | 医用电气设备 肺通气机安全性的特定要求 第2-12部分：危急护理通气机 | Medical electrical equipment - Part 2-12: Particular requirements for the safety of lung ventilators; Critical care ventilators |
| IEC 60842-1988 | 氢冷式涡轮同步电机的使用与运行导则 | Guide for application and operation of turbine-type synchronous machines using hydrogen as a coolant. |
| IEC 60978-1989 | 三芳基磷酸酯涡轮机控制液的维护和使用指南 | Maintenance and use guide for triaryl phosphate ester turbine control fluids |
| IEC 61221-2004 | 石油产品和润滑剂.三芳基磷酸酯涡轮机控制液(ISO-L-TCD类).规范 | Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications |
| IEC 61400-1-2005 | 风涡轮发电机组.第1部分:设计要求 | Wind turbines - Part 1: Design requirements |
| IEC 61400-2-2006 | 风力涡轮机.第2部分:小型风力涡轮机的设计要求 | Wind turbines - Part 2: Design requirements for small wind turbines |
| IEC/TR 61400-24-2002 | 风力涡轮机发电机系统.第24部分:避雷装置 | Wind turbine generator systems - Part 24: Lightning protection |
| IEEE 1129-1992 | 涡轮发电机监测仪表用推荐规范 | (Recommended practice for monitoring and instrumentation of turbine generators) |
| IEEE 67-1990 | 涡轮发电机操作和维护指南 | (Guide for operation and maintenance of turbine generators) |
| ISO 10050-2005 | 润滑剂、工业润滑油和相关产品（L类）.T（涡轮机）族.三芳基磷酸脂涡轮机控制液体规范(类别 ISO-L-TCD) | Lubricants, industrial oils and related products (class L) - Family T (Turbines) - Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD) |
| ISO 10651-2-2004 | 医用肺通气机.基本安全和性能的特殊要求.第2部分:通气机依赖型病人用家庭护理通气机 | Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 2: Home care ventilators for ventilator-dependent patients |
| ISO 10651-3-1997 | 医用肺通气机 第3部分:急救和运送用通气机的专用要求 | Lung ventilators for medical use - Part 3: Particular requirements for emergency and transport ventilators |
| ISO 10651-4-2002 | 医用肺通气机.第4部分:操作员控制的呼吸器的特殊要求 | Lung ventilators - Part 4: Particular requirements for operator-powered resuscitators |
| ISO 10651-5-2006 | 医用肺通气机.基本安全和性能的特殊要求.第5部分:气体驱动急救人工呼吸器 | Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 5: Gas-powered emergency resuscitators |
| ISO 10651-6-2004 | 医用肺通气机.基本安全和性能的特殊要求.第6部分:家庭护理通风机支持设备 | Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 6: Home-care ventilatory support devices |
| ISO 12097-3-2002 | 道路车辆.空气囊零部件.第3部分:充气机组合件的检验 | Road vehicles - Airbag components - Part 3: Testing of inflator assembly |
| ISO 14621-1-2003 | 航天系统.电气、电子和电气机械(EEE)零件.第1部分:零件管理 | Space systems - Electrical, electronic and electromechanical (EEE) parts - Part 1: Parts management |
| ISO 14661 AMD 1-2002 | 工业用热涡轮机(蒸汽涡轮机、气体膨胀式轮机).一般要求.修改件A1:工业用热涡轮机数据表 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) - General requirements; Amendment A1: Data sheets for thermal turbines for industrial applications |
| ISO 14661-2000 | 工业用热力涡轮机(蒸气轮机、燃气膨胀涡轮) 一般要求 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) - General requirements |
| ISO 15911-2000 | 石油产品 用氢含量数据评定航空涡轮燃烧的净比能 | Petroleum products - Estmation of net specific emergy of eviation turbine fuels using hydrogen content data |
| ISO 2715-1981 | 液态烃 用涡轮流量计测量体积 | Liquid hydrocarbons; Volumetric measurement by turbine meter systems |
| ISO 5302-2003 | 真空技术.涡轮分子泵.性能特征的测量 | Vacuum technology - Turbomolecular pumps - Measurement of performance characteristics |
| ISO 5367-2000 | 麻醉机和通气机连用的呼吸管 | Breathing tubes intended for use with anaesthetic apparatus and ventilators |
| ISO 7785-1-1997 | 牙科手机 第1部分:高速气动涡轮手机 | Dental handpieces - Part 1: High-speed air turbine handpieces |
| ISO 8068-1987 | 石油产品和润滑剂 涡轮机用润滑油(ISO-L-TSA和 ISO-L-TGA类)规格 | Petroleum products and lubricants; Petroleum lubricating oils for turbines (categories ISO-L-TSA and ISO-L-TGA); Specifications |
| ISO 81400-4 Technical Corrigendum 1-2005 | 风力涡轮机.第4部分:齿轮箱的设计和规范.技术勘误1 | Wind turbines - Part 4: Design and specification of gearboxes; Technical Corrigendum 1 |
| ISO 81400-4-2005 | 风力涡轮机.第4部分:齿轮箱的设计和规范 | Wind turbines - Part 4: Design and specification of gearboxes |
| ISO 9951-1993 | 封闭管道中气体流量的测量 涡轮计 | Measurement of glas flow in closed conduits; turbine meters |
| JB/T 10629-2006 | 燃气机 通用技术条件和试验方法 | Gas engines-General requirements and test methods |
| JB/T 10670-2006 | 倒伞型表面曝气机 | Inverted-umbrella type surface aerator |
| JB/T 57213-1999 | 涡轮流量传感器 可靠性要求与考核方法 | () |
| JB/T 6002-2007 | 涡轮增压器 清洁度限值及测定方法 | Turbochargers-Limit values and measurement methods for cleanliness |
| JB/T 6689-1993 | 燃气轮机 压气机叶片燕尾根槽公差及技术要求 | () |
| JB/T 8700-1998 | 氧化沟水平轴转刷曝气机技术条件 | () |
| JB/T 9125-2007 | 真空技术 涡轮分子泵 | Vacuum technology-Turbomolecular pumps |
| JB/T 9246-1999 | 涡轮流量传感器 | () |
| JB/T 9711-2001 | 单级向心涡轮液力变矩器 通用技术条件 | () |
| JB/T 9752.1-2005 | 涡轮增压器 第1部分：一般技术条件 | () |
| JB/T 9752.2-2005 | 涡轮增压器 第2部分：试验方法 | () |
| JB/T 9752.3-2004 | 涡轮增压器 转子平衡品质及校验方法 | () |
| JIS B0131-2002 | 涡轮泵术语集 ターボポンプ用語 | Glossary of terms for turbopumps |
| JIS B8043-1-2000 | 燃气涡轮.废气排放.第1部分:测量和评价 ガスタービン ― 排気排出物 ― 第１部：測定及び評価 | Gas turbines -- Exhaust gas emission -- Part 1: Measurement and evaluation |
| JIS B8043-2-2000 | 燃气涡轮.废气排放.第2部分:自动排放监测 ガスタービン ― 排気排出物 ― 第２部：排出物の自動監視 | Gas turbines -- Exhaust gas emission -- Part 2: Automated emission monitoring |
| JIS B8044-2001 | 燃气轮机和燃气涡轮机组.发出的气载噪声的测量.工程/测量法 ガスタービン及びガスタービン装置 ― 空気音の測定 ― 実用測定方法及び簡易測定方法 | Gas turbines and gas turbine sets -- Measurement of emitted airborne noise -- Engineering/survey method |
| JIS B8103-1989 | 水轮机及双向泵水涡轮的模型试验方法 水車及びポンプ水車の模型試験方法 | Methods for model tests of hydraulic turbine and reversible pump-turbine |
| JIS B8105-2004 | 蒸汽涡轮机.验收试验.改型蒸汽涡轮机的热性能检查试验 蒸気タービン－受渡試験方法－改造時の性能確認 | Steam turbines -- Acceptance test -- Thermal performance verification tests of retrofitted steam turbines |
| JIS B8330-2000 | 涡轮风扇试验方法 送風機の試験及び検査方法 | Testing methods for turbo-fans |
| JIS B8330 ERRATUM 1-2002 | 涡轮风扇的试验方法(勘误1) | Testing methods for turbo-fans (Erratum 1) |
| JIS B8340-2000 | 涡轮式鼓风机和压缩机的检验方法 ターボ形ブロワ・圧縮機の試験及び検査方法 | Testing methods for turbo blowers and compressors |
| JIS B8345-1995 | 涡轮式鼓风机和气体压缩机的封闭试验方法 ターボ形ガス用ブロワ・圧縮機の閉回路による試験及び検査方法 | Testing methods of turbo blowers and compressors for gases by loop arrangement |
| JIS C1400-0-2005 | 风力涡轮发电机系统.第0部分:风力涡轮发电机系统术语汇编 風力発電システム―第０部：風力発電用語 | Wind turbine generator systems -- Part 0: Glossary of terms for wind turbine generator system |
| JIS C1400-1-2001 | 风力涡轮发电系统.第1部分:安全性要求 風力発電システム ― 第１部：安全要件 | Wind turbine generator systems -- Part 1: Safety requirements |
| JIS C1400-2-1999 | 风力涡轮发电机系统.第2部分:小型风力涡轮机的安全性 風力発電システム ― 第２部：小形風力発電システムの安全基準 | Wind turbine generator systems -- Part 2: Safety of small wind turbines |
| JIS C1400-11-2005 | 风力涡轮发电机系统.第11部分:噪声测量技术 風力発電システム―第１１部：騒音測定方法 | Wind turbine generator systems -- Part 11: Acoustic noise measurement techniques |
| JIS C1400-12-2002 | 风涡轮发电机系统.第12部分:风力涡轮机动力特性试验 風力発電システム ― 第１２部：風車の性能計測方法 | Wind turbine generator systems -- Part 12: Wind turbine power performance testing |
| JIS C1400-12 ERRATUM 1-2002 | 风力涡轮发电机系统.第12部分:风力涡轮发电机的性能试验(勘误1) | Wind turbine generator systems -- Part 12: Wind turbine power performance testing (Erratum 1) |
| JIS C1400-21-2005 | 风力涡轮发电机系统.第21部分:网格连接风力涡轮机的发电质量特性的测量和评定 風力発電システム―第２１部：系統連系風車の電力品質特性の測定及び評価 | Wind turbine generator systems -- Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines |
| JIS C9335-2-92-2005 | 家用和类似用途电气设备.安全.第2-92部分:脚踏交流供电草地松土机和通气机的特殊要求 家庭用及びこれに類する電気機器の安全性―第２－９２部：歩行式芝生用スカリファイア及びエアレータの個別要求事項 | Household and similar electrical appliances -- Safety -- Part 2-92: Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators |
| JIS K2209-1991 | 航空涡轮机燃油 航空タービン燃料油 | Aviation turbine fuels |
| JIS K2213-1983 | 涡轮机油 タービン油 | Turbine oils |
| JIS K2213 AMD 1-2006 | 涡轮机油（修改件1） タービン油（追補１） | Turbine oils (Amendment 1) |
| JIS K2537-2000 | 石油产品.煤油和航空涡轮机燃料.烟雾点的测定 石油製品 ― 灯油及び航空タービン燃料油 ― 煙点試験方法 | Petroleum products -- Kerosine and aviation turbine fuels -- Determination of smoke point |
| JIS T5906-2001 | 牙钻手柄.第1部分:高速空气涡轮牙钻手柄 歯科用ハンドピース ― 第１部：高速エアタービンハンドピース | Dental handpieces -- Part 1: High-speed air-turbine handpieces |
| JIS W4601-1996 | 飞行器用涡轮喷气及涡轮风扇发动机通用规范 航空ターボジェットエンジン及びターボファンエンジン通則 | General specification of turbojet engines and turbofan engines for aircraft |
| JIS W4606-1995 | 飞行器涡轮轴和涡轮螺旋桨发动机通用规范 航空ターボシャフトエンジン及びターボプロップエンジン通則 | General specification of turboshaft and turboprop engines for aircraft |
| NF C01-415-1999 | 电工词汇.第415章:风力涡轮发电系统 | (Electrotechnical Vocabulary - chapter 415 : wind turbine generator systems.) |
| NF C27-140-1995 | 石油产品和润滑剂.三重磷酸脂涡轮控制流体.规范 | (Petroleum products and lubricants. Triaryl phosphate ester turbine control fluids (category iso-L-tcd). Specifications.) |
| NF C51-113-1997 | 旋转电机.第3部分:涡轮型同步机械的特殊要求 | (Rotating electrical machines. Part 3 : specific requirements for turbine-type synchronous machines.) |
| NF C55-420-1993 | 液压机(涡轮、存储泵和水泵-水轮机)的振动和脉动的现场测量指南 | (Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storga pumps and pump-turbines).) |
| NF C55-493-2000 | 液压涡轮机,储存泵和泵涡轮.模型验收试验 | (Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests.) |
| NF E17-303-2002 | 煤气表.涡轮式煤气表 | (Gas meters - Turbine gas meters.) |
| NF E37-500-1988 | 内燃机.燃气涡轮机.验收试验 | (INTERNAL COMBUSTION MACHINES. GAS TURBINE. ACCEPTANCE TESTS.) |
| NF E37-501-9-2000 | 气体涡轮.征购.第9部分:可信性,可用性,可维修性和安全性 | (Gas turbines - Procurement - Part 9 : reliability, availability, maintainability and safety.) |
| NF E37-601-2000 | 工业用热涡轮机(蒸汽涡轮机,气膨胀涡轮机).一般要求 | (Thermal turbines for industrial applications (steam turbines, gas expansion turbines) - General requirements.) |
| NF E44-501-1991 | 小功率液压涡轮机.平台试验 | (LOW POWER HYDRAULIC TURBINES. TESTS ON TEST RIG.) |
| NF E44-502-1991 | 小功率水力涡轮机.现场验收试验 | (SMALL POWER HYDRAULIC TURBINES. FIELD ACCEPTANCE TEST.) |
| NF R10-105-3-2003 | 道路车辆.安全气囊元部件.第3部分:充气机组件的检验 | (Road vehicles - Airbag components - Part 3 : testing of inflator assemblies.) |
| NF R16-339-1990 | 置于内燃机和压气机入口处的空气分离器.效率试验 | (INLET AIR CLEANING EQUIPMENT FOR INTERNAL COMBUSTION ENGINES AND COMPRESSORS. PERFORMANCE TESTING.) |
| NF S31-071-1981 | 声学.燃气涡轮机空气传播噪音的测量.规范和鉴验方法 | (ACOUSTICS. MEASUREMENT OF AIRBONE NOISE EMITTED BY GAS TURBINE INSTALLATIONS. SPECIFICATIONS AND SURVEY METHOD.) |
| NF S91-112-1999 | 牙钻手柄.第1部分:高速空气涡轮手柄 | (Dental handpieces. Part 1 : high-speed air turbine handpieces.) |
| NF S95-146-2002 | 医用肺通气机.第4部分:操作员控制的呼吸器的特殊要求 | (Lung ventilators - Part 4 : particular requirements for operator-powered resuscitators.) |
| NF S95-161-1998 | 肺换气机.第3部分:急救和输送换气机的特殊要求 | (Lung ventilators. Part 3 : particular requirements for emergency and transport ventilators.) |
| NF T60-125-1979 | 石油产品.涡轮机油的反乳化 | (PETROLEUM PRODUCTS. DE EMULSION OF TURBINE OILS.) |
| NF T60-150-1979 | 石油产品.加抗氧化剂涡轮机油的氧化稳定性 | (PETROLEUM PRODUCTS. OXIDATION STABILITY OF INHIBITED TURBINE OILS.) |
| NF T60-151-1979 | 石油产品.有水时涡轮机油防锈特性的评定 | (PETROLEUM PRODUCTS. ASSESSMENT OF RUST-PREVENTING CHARACTERISTICS OF TURBINE OIL IN THE PRESENCE OF WATER.) |
| NF T60-156-1982 | 石油产品.不加抗氧剂的新涡轮机油的抗乳化指数.水蒸气试验 | (PETROLEUM PRODUCTS. DESEMULSIFICATION NUMBER OF NEW NON INHIBITED TURBINE OILS. WATER VAPOUR TEST.) |
| NF T60-503-1988 | 润滑剂、工业润滑油及相关产品(L级).分类.第5部分:T族(涡轮用) | (Lubricants, industrial oils and related products (class L). Classification. Part 5 : family T (turbines).) |
| NF T60-521-1989 | 石油产品和润滑剂.涡轮用石油润滑油(ISO-L-TSA和ISO-L-TGA).规范 | (PETROLEUM PRODUCTS AND LUBRICANTS. PETROLEUM LUBRICATING OILS FOR TURBINES (CATEGORIES ISO-L-TSA AND ISO-L-TGA). SPECIFICATIONS.) |
| NF T81-008-1974 | 液态化学产品的运输和装卸:内河航行罐船.运输过程中的安全要求.压缩空气机械操作安全设备 | (TRANSPORT AND HANDLING OF LIQUID CHEMICAL PRODUCTS:TANKERS FOR INTERIOR NAVIGATION:SAFETY REQUIREMENTS DURING TRANSFER OPERATIONS - MECHANICALLY OPERATED SAFETY DEVICE BY COMPRESSED AIR.) |
| NF X10-519-1975 | 真空技术.涡轮分子泵.功能特性的测定 | (VACUUM TECHNOLOGY - METHODS OF MEASUREMENT OF THE PERFORMANCE CHARACTERISTICS OF TURBO-MOLECULAR PUMPS) |
| NF X50-001-5-1-1998 | 动力站设备的征购指南.第5-1部分:涡轮机.蒸气涡轮机 | (Guide for procurement of power station equipment. Part 5-1 : turbines. Steam turbines.) |
| NF X50-001-5-2-1998 | 发电站设备的采购指南.第5-2部分:涡轮机.气体涡轮机 | (Guide for procurement of power station equipment. Part 5-2 : turbines. Gas turbines.) |
| NF X50-001-5-3-1998 | 动力站设备的征购指南.第5-3部分:涡轮机.蒸气涡轮机 | (Guide for procurement of power station equipment. Part 5-3 : turbines. Aerogeneratore.) |
| NF X50-001-5-4-1998 | 动力站设备的征购指南.第5-4部分:涡轮机.液压涡轮机.储存泵和泵涡轮机 | (Guide for procurement of power station equipment. Part 5-4 : turbines. Hydraulic turbines, storage pumps and pump-turbines.) |
| NF X50-001-6-1-1998 | 发电站设备的采购指南.第6-1部分:涡轮机附件.空气分离器 | (Guide for procurement of power station equipment. Part 6-1 : turbine auxiliaries. Deaerators.) |
| NF X50-001-6-2-1998 | 发电站设备的采购指南.第6-2部分:涡轮机附件.回水加热器 | (Guide for procurement of power station equipment. Part 6-2 : turbine auxiliaries. Feedwater heaters.) |
| NF X50-001-6-3-1998 | 发电站设备的采购指南.第6-3部分:涡轮机附件.压缩工厂 | (Guide for procurement of power station equipment. Part 6-3 : turbine auxiliaries. Condenser plant.) |
| NF X50-001-6-4-2000 | 动力站设备的征购指南.第6部分:涡轮附件.第4节:泵 | (Guide for the procurement of power station equipement - Part 6 : turbine auxiliaries - Section 4 : pumps.) |
| NF X50-001-6-5-2000 | 动力站设备的征购指南.第6部分:涡轮附件.第5节:干冷系统 | (Guide for procurement of power station equipment - Part 6 : turbines auxiliaries - Section 5 : dry cooling systems.) |
| NF X50-001-6-6-2000 | 动力站设备的征购指南.第6部分:涡轮附件.第6节:湿和湿/干冷却塔 | (Guide for the procurement of power station equipment - Part 6 : turbine auxiliaries - Section 6 : wet and wet/dry cooling towers.) |
| NF X50-001-6-7-1998 | 发电站设备的采购指南.第6-7部分:涡轮机附件.潮气隔离再加热器 | (Guide for procurement of power station equipment. Part 6-7 : turbine auxiliaries. Moisture separator reheaters.) |
| NF X50-001-6-8-2000 | 发电站设备采购指南.第6部分:涡轮机辅助设备.第8节:起重机 | (Guide for procurement of power station equipment - Part 6 : turbine auxiliaries - Section 8 : cranes.) |
| NF X50-001-6-9-2000 | 发电站设备采购指南.第6部分:涡轮机辅助设备.第9节:冷却水系统 | (Guide for procurement of power station equipment - Part 6 : turbine auxiliaries - Section 9 : cooling water systems.) |
| PD IEC WT 01-2001 | 风力涡轮机的符合性测试和认证用IEC系统.规则和程序 | IEC system for conformity testing and certification of wind turbines. Rules and procedures |
| QC/T 590-1999(2005) | 汽车柴油机涡轮增压器技术条件 | () |
| QC/T 591-1999(2005) | 汽车柴油机涡轮增压器试验方法 | () |
| SH/T 0632-1996(2003) | 航空涡轮发动机润滑剂比热测定法（热分析法） | () |
| SY/T 5141-2002 | 石油钻机用离心涡轮液力变距器 | () |
| prEN 45517-1994 | 采购指南 涡轮机辅助设备 脱气器 | Guide for procurement - Turbine auxiliaries - Deaerators |
| prEN 45518-1994 | 采购指南 涡轮机辅助设备 给水加热器 | Guide for procurement - Turbine auxiliaries - Feedwater heaters |
| prEN 45529-1994 | 采购指南 涡轮机辅助设备 冷凝设备 | Guides for procurement - Turbine auxiliaries - Condenser plant |
| prEN 45536-1995 | 采购指南 涡轮机 汽轮机 | Guides for procurement - Turbines - Steam turbine |
| prEN 45537-1995 | 采购指南 涡轮机组 燃气轮机 | Guides for procurement - Turbine group - Gas turbines |
| prEN 45539-1995 | 采购指南 涡轮机辅助设备 湿气分离回热器 | Guides for procurement - Turbine auxilliaries - Moisture separator reheater |
| prEN 45540-1995 | 采购指南 涡轮发电机 | Guide for procurement - Generators driven by turbine |
| prEN 45543-1995 | 采购指南 涡轮 水压机 | Guides for procurement - Turbines - Hydraulic machines |
| prEN 50308-2003 | 风力涡轮机 实验室安全性 | Wind turbines - Protective measures - Requirements for design, operation and maintenance |
| 编号 | 中文名称 | 英文名称 |